baytrail/rambi: S3 support and other updates
baytrail: Change all GPIO related pull resistors from 10K to 20K Reviewed-on: https://chromium-review.googlesource.com/187570 (cherry picked from commit 762e99861dd1ae61ddcf1ebdec8e698ede54405e) baytrail: workaround kernel using serial console on resume Reviewed-on: https://chromium-review.googlesource.com/188011 (cherry picked from commit b0da3bdb5b6b417ad6cab0084359d4eae1cb4469) baytrail: allow dirty cache line evictions for SMRAM to stick Reviewed-on: https://chromium-review.googlesource.com/188015 (cherry picked from commit 50fb1e6a844e1db05574c92625da23777ad7a0ca) baytrail: Optionally pull up TDO and TMS to avoid power loss in S3. Reviewed-on: https://chromium-review.googlesource.com/188260 (cherry picked from commit e240856609b4eed5ed44ec4e021ed385965768d6) rambi: always load option rom Reviewed-on: https://chromium-review.googlesource.com/188721 (cherry picked from commit d8a1d108548d20755f8683497c215e76d513b7a9) baytrail: use new chromeos ram oops API Reviewed-on: https://chromium-review.googlesource.com/186394 (cherry picked from commit f38e6969df9b5453b10d49be60b5d033d38b4594) rambi: always show dev/rec screens on eDP connected panel Reviewed-on: https://chromium-review.googlesource.com/188731 (cherry picked from commit 7d8570ac52f68492a2250fa536d55f7cbbd9ef95) baytrail: stop e820 reserving default SMM region Reviewed-on: https://chromium-review.googlesource.com/189084 (cherry picked from commit 6fce823512f5db5a09a9c89048334c3524c69a24) baytrai: update MRC wrapper header Reviewed-on: https://chromium-review.googlesource.com/189196 (cherry picked from commit 36b33a25b6603b6a74990b00d981226440b68970) rambi: Put LPE device into ACPI mode Reviewed-on: https://chromium-review.googlesource.com/189371 (cherry picked from commit 5955350cd57fd1b3732b6db62911d824712a5413) baytrail: DPTF: Enable mainboard-specific PPCC Reviewed-on: https://chromium-review.googlesource.com/189576 (cherry picked from commit 27fae3e670244b529b7c0241742fc2b55d52c612) baytrail: Add config option for PCIe wake Reviewed-on: https://chromium-review.googlesource.com/189994 (cherry picked from commit 1cc31a7c021ec84311f1d4e89dd3e57ca8801ab5) rambi: Enable PCIe wake Reviewed-on: https://chromium-review.googlesource.com/189995 (cherry picked from commit c98ae1fee54cfb2b3d3c21a19cdbbf56a0bfa1e6) Squashed 13 commits for baytrail/rambi. Change-Id: I153ef5a43e2bede05cfd624f53e24a0013fd8fb4 Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6957 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
This commit is contained in:
Kein Yuan
Marc Jones
parent
a8cfb255fb
commit
3511023f34
|
|
@ -12,6 +12,7 @@ config BOARD_SPECIFIC_OPTIONS
|
|||
select HAVE_OPTION_TABLE
|
||||
select HAVE_ACPI_RESUME
|
||||
select MAINBOARD_HAS_CHROMEOS
|
||||
select ALWAYS_LOAD_OPROM
|
||||
|
||||
config VBOOT_RAMSTAGE_INDEX
|
||||
hex
|
||||
|
|
|
|||
|
|
@ -49,5 +49,26 @@ Name (DTRT, Package () {
|
|||
Package () { \_SB.DPTF.TCPU, \_SB.DPTF.TSR2, 100, 600, 0, 0, 0, 0 },
|
||||
})
|
||||
|
||||
Name (MPPC, Package ()
|
||||
{
|
||||
0x2, // Revision
|
||||
Package () { // Power Limit 1
|
||||
0, // PowerLimitIndex, 0 for Power Limit 1
|
||||
1600, // PowerLimitMinimum
|
||||
6200, // PowerLimitMaximum
|
||||
1000, // TimeWindowMinimum
|
||||
1000, // TimeWindowMaximum
|
||||
200 // StepSize
|
||||
},
|
||||
Package () { // Power Limit 2
|
||||
1, // PowerLimitIndex, 1 for Power Limit 2
|
||||
8000, // PowerLimitMinimum
|
||||
8000, // PowerLimitMaximum
|
||||
1000, // TimeWindowMinimum
|
||||
1000, // TimeWindowMaximum
|
||||
1000 // StepSize
|
||||
}
|
||||
})
|
||||
|
||||
/* Include Baytrail DPTF */
|
||||
#include <soc/intel/baytrail/acpi/dptf/dptf.asl>
|
||||
|
|
|
|||
|
|
@ -32,8 +32,12 @@ chip soc/intel/baytrail
|
|||
register "sdcard_cap_high" = "0x0"
|
||||
|
||||
# Enable devices in ACPI mode
|
||||
register "scc_acpi_mode" = "1"
|
||||
register "lpe_acpi_mode" = "1"
|
||||
register "lpss_acpi_mode" = "1"
|
||||
register "scc_acpi_mode" = "1"
|
||||
|
||||
# Allow PCIe devices to wake system from suspend
|
||||
register "pcie_wake_enable" = "1"
|
||||
|
||||
# Enable PIPEA as DP_C
|
||||
register "gpu_pipea_hotplug" = "6" # 6ms Pulse
|
||||
|
|
|
|||
|
|
@ -67,15 +67,15 @@ static int int15_handler(void)
|
|||
* Boot Display Device Hook:
|
||||
* bit 0 = CRT
|
||||
* bit 1 = TV (eDP) *
|
||||
* bit 2 = EFP *
|
||||
* bit 2 = EFP
|
||||
* bit 3 = LFP
|
||||
* bit 4 = CRT2
|
||||
* bit 5 = TV2 (eDP) *
|
||||
* bit 6 = EFP2 *
|
||||
* bit 5 = TV2 (eDP)
|
||||
* bit 6 = EFP2
|
||||
* bit 7 = LFP2
|
||||
*/
|
||||
X86_AX = 0x005f;
|
||||
X86_CX = 0x0006;
|
||||
X86_CX = 0x0002;
|
||||
res = 1;
|
||||
break;
|
||||
case 0x5f51:
|
||||
|
|
|
|||
|
|
@ -10,6 +10,7 @@ config CPU_SPECIFIC_OPTIONS
|
|||
select ARCH_BOOTBLOCK_X86_32
|
||||
select ARCH_ROMSTAGE_X86_32
|
||||
select ARCH_RAMSTAGE_X86_32
|
||||
select BACKUP_DEFAULT_SMM_REGION
|
||||
select CACHE_MRC_SETTINGS
|
||||
select CAR_MIGRATION
|
||||
select COLLECT_TIMESTAMPS
|
||||
|
|
|
|||
|
|
@ -127,26 +127,11 @@ Device (TCPU)
|
|||
}
|
||||
}
|
||||
|
||||
Name (PPCC, Package ()
|
||||
/* Return PPCC table defined by mainboard */
|
||||
Method (PPCC)
|
||||
{
|
||||
0x2, // Revision
|
||||
Package () { // Power Limit 1
|
||||
0, // PowerLimitIndex, 0 for Power Limit 1
|
||||
1600, // PowerLimitMinimum
|
||||
6200, // PowerLimitMaximum
|
||||
1000, // TimeWindowMinimum
|
||||
1000, // TimeWindowMaximum
|
||||
200 // StepSize
|
||||
},
|
||||
Package () { // Power Limit 2
|
||||
1, // PowerLimitIndex, 1 for Power Limit 2
|
||||
8000, // PowerLimitMinimum
|
||||
8000, // PowerLimitMaximum
|
||||
1000, // TimeWindowMinimum
|
||||
1000, // TimeWindowMaximum
|
||||
1000 // StepSize
|
||||
}
|
||||
})
|
||||
Return (\_SB.MPPC)
|
||||
}
|
||||
|
||||
#ifdef DPTF_CPU_CRITICAL
|
||||
Method (_CRT)
|
||||
|
|
|
|||
|
|
@ -198,10 +198,6 @@ Device (PDRC)
|
|||
Memory32Fixed(ReadWrite, MPHY_BASE_ADDRESS, MPHY_BASE_SIZE)
|
||||
Memory32Fixed(ReadWrite, PUNIT_BASE_ADDRESS, PUNIT_BASE_SIZE)
|
||||
Memory32Fixed(ReadWrite, RCBA_BASE_ADDRESS, RCBA_BASE_SIZE)
|
||||
#if CONFIG_CHROMEOS_RAMOOPS
|
||||
Memory32Fixed(ReadWrite, CONFIG_CHROMEOS_RAMOOPS_RAM_START,
|
||||
CONFIG_CHROMEOS_RAMOOPS_RAM_SIZE)
|
||||
#endif
|
||||
})
|
||||
|
||||
// Current Resource Settings
|
||||
|
|
|
|||
|
|
@ -163,6 +163,13 @@
|
|||
.use_sel = GPIO_USE_MMIO, \
|
||||
.is_gpio = 1 }
|
||||
|
||||
#define GPIO_INPUT_PU_20K \
|
||||
{ .pad_conf0 = PAD_PU_20K | PAD_PULL_UP | PAD_CONFIG0_DEFAULT, \
|
||||
.pad_conf1 = PAD_CONFIG1_DEFAULT, \
|
||||
.pad_val = PAD_VAL_INPUT, \
|
||||
.use_sel = GPIO_USE_MMIO, \
|
||||
.is_gpio = 1 }
|
||||
|
||||
#define GPIO_INPUT_PD_10K \
|
||||
{ .pad_conf0 = PAD_PU_10K | PAD_PULL_DOWN | PAD_CONFIG0_DEFAULT, \
|
||||
.pad_conf1 = PAD_CONFIG1_DEFAULT, \
|
||||
|
|
@ -170,15 +177,22 @@
|
|||
.use_sel = GPIO_USE_MMIO, \
|
||||
.is_gpio = 1 }
|
||||
|
||||
#define GPIO_INPUT_PD_20K \
|
||||
{ .pad_conf0 = PAD_PU_20K | PAD_PULL_DOWN | PAD_CONFIG0_DEFAULT, \
|
||||
.pad_conf1 = PAD_CONFIG1_DEFAULT, \
|
||||
.pad_val = PAD_VAL_INPUT, \
|
||||
.use_sel = GPIO_USE_MMIO, \
|
||||
.is_gpio = 1 }
|
||||
|
||||
#define GPIO_INPUT_NOPU \
|
||||
{ .pad_conf0 = PAD_PU_10K | PAD_PULL_DISABLE | PAD_CONFIG0_DEFAULT, \
|
||||
{ .pad_conf0 = PAD_PU_20K | PAD_PULL_DISABLE | PAD_CONFIG0_DEFAULT, \
|
||||
.pad_conf1 = PAD_CONFIG1_DEFAULT, \
|
||||
.pad_val = PAD_VAL_INPUT, \
|
||||
.use_sel = GPIO_USE_MMIO, \
|
||||
.is_gpio = 1 }
|
||||
|
||||
#define GPIO_INPUT_LEGACY_NOPU \
|
||||
{ .pad_conf0 = PAD_PU_10K | PAD_PULL_DISABLE | PAD_CONFIG0_DEFAULT, \
|
||||
{ .pad_conf0 = PAD_PU_20K | PAD_PULL_DISABLE | PAD_CONFIG0_DEFAULT, \
|
||||
.pad_conf1 = PAD_CONFIG1_DEFAULT, \
|
||||
.pad_val = PAD_VAL_INPUT, \
|
||||
.use_sel = GPIO_USE_LEGACY, \
|
||||
|
|
@ -187,7 +201,7 @@
|
|||
|
||||
/* Direct / dedicated IRQ input - pass signal directly to apic */
|
||||
#define GPIO_DIRQ \
|
||||
{ .pad_conf0 = PAD_PU_10K | PAD_PULL_DISABLE | PAD_CONFIG0_DEFAULT \
|
||||
{ .pad_conf0 = PAD_PU_20K | PAD_PULL_DISABLE | PAD_CONFIG0_DEFAULT \
|
||||
| PAD_FUNC0 | PAD_IRQ_EN | PAD_TPE_IRQ | PAD_LEVEL_IRQ, \
|
||||
.pad_conf1 = PAD_CONFIG1_DEFAULT, \
|
||||
.pad_val = PAD_VAL_INPUT, }
|
||||
|
|
@ -220,13 +234,13 @@
|
|||
.pad_val = PAD_VAL_DEFAULT }
|
||||
|
||||
/* Default functional configs -- no PU */
|
||||
#define GPIO_FUNC0 GPIO_FUNC(0, PULL_DISABLE, 10K)
|
||||
#define GPIO_FUNC1 GPIO_FUNC(1, PULL_DISABLE, 10K)
|
||||
#define GPIO_FUNC2 GPIO_FUNC(2, PULL_DISABLE, 10K)
|
||||
#define GPIO_FUNC3 GPIO_FUNC(3, PULL_DISABLE, 10K)
|
||||
#define GPIO_FUNC4 GPIO_FUNC(4, PULL_DISABLE, 10K)
|
||||
#define GPIO_FUNC5 GPIO_FUNC(5, PULL_DISABLE, 10K)
|
||||
#define GPIO_FUNC6 GPIO_FUNC(6, PULL_DISABLE, 10K)
|
||||
#define GPIO_FUNC0 GPIO_FUNC(0, PULL_DISABLE, 20K)
|
||||
#define GPIO_FUNC1 GPIO_FUNC(1, PULL_DISABLE, 20K)
|
||||
#define GPIO_FUNC2 GPIO_FUNC(2, PULL_DISABLE, 20K)
|
||||
#define GPIO_FUNC3 GPIO_FUNC(3, PULL_DISABLE, 20K)
|
||||
#define GPIO_FUNC4 GPIO_FUNC(4, PULL_DISABLE, 20K)
|
||||
#define GPIO_FUNC5 GPIO_FUNC(5, PULL_DISABLE, 20K)
|
||||
#define GPIO_FUNC6 GPIO_FUNC(6, PULL_DISABLE, 20K)
|
||||
|
||||
/* ACPI GPIO routing. Assume everything is externally pulled and negative edge
|
||||
* triggered. SCI implies WAKE, but WAKE doesn't imply SCI. */
|
||||
|
|
@ -265,9 +279,9 @@
|
|||
/* Common default GPIO settings */
|
||||
#define GPIO_INPUT GPIO_INPUT_NOPU
|
||||
#define GPIO_INPUT_LEGACY GPIO_INPUT_LEGACY_NOPU
|
||||
#define GPIO_INPUT_PU GPIO_INPUT_PU_10K
|
||||
#define GPIO_INPUT_PD GPIO_INPUT_PD_10K
|
||||
#define GPIO_NC GPIO_INPUT_PU_10K
|
||||
#define GPIO_INPUT_PU GPIO_INPUT_PU_20K
|
||||
#define GPIO_INPUT_PD GPIO_INPUT_PD_20K
|
||||
#define GPIO_NC GPIO_INPUT_PU_20K
|
||||
#define GPIO_DEFAULT GPIO_FUNC0
|
||||
|
||||
/* 16 DirectIRQs per supported bank */
|
||||
|
|
@ -320,7 +334,7 @@ struct gpio_bank {
|
|||
const u8 gpio_f1_range_end;
|
||||
};
|
||||
|
||||
void setup_soc_gpios(struct soc_gpio_config *config);
|
||||
void setup_soc_gpios(struct soc_gpio_config *config, u8 enable_xdp_tap);
|
||||
/* This function is weak and can be overridden by a mainboard function. */
|
||||
struct soc_gpio_config* mainboard_get_gpios(void);
|
||||
|
||||
|
|
|
|||
|
|
@ -197,10 +197,18 @@ void iosf_ssus_write(int reg, uint32_t val);
|
|||
#define BUNIT_BMBOUND_HI 0x26
|
||||
#define BUNIT_MMCONF_REG 0x27
|
||||
/* The SMMRR registers define the SMM region in MiB granularity. */
|
||||
#define BUNIT_SMRCP 0x2b
|
||||
#define BUNIT_SMRRAC 0x2c
|
||||
#define BUNIT_SMRWAC 0x2d
|
||||
#define BUNIT_SMRRL 0x2e
|
||||
#define BUNIT_SMRRH 0x2f
|
||||
# define BUNIT_SMRR_ENABLE (1 << 31)
|
||||
|
||||
/* SA ID bits. */
|
||||
#define SAI_IA_UNTRUSTED (1 << 0)
|
||||
#define SAI_IA_SMM (1 << 2)
|
||||
#define SAI_IA_BOOT (1 << 4)
|
||||
|
||||
/*
|
||||
* DUNIT Registers.
|
||||
*/
|
||||
|
|
|
|||
|
|
@ -28,7 +28,7 @@
|
|||
#ifndef _MRC_WRAPPER_H_
|
||||
#define _MRC_WRAPPER_H_
|
||||
|
||||
#define MRC_PARAMS_VER 4
|
||||
#define MRC_PARAMS_VER 5
|
||||
|
||||
#define NUM_CHANNELS 2
|
||||
|
||||
|
|
@ -55,12 +55,25 @@ enum mrc_wrapper_error {
|
|||
PLATFORM_SETTINGS_FAIL = -4,
|
||||
DIMM_DETECTION_FAILURE = -5,
|
||||
MEMORY_CONFIG_FAILURE = -6,
|
||||
INVALID_CPU_ODT_SETTING = -7,
|
||||
INVALID_DRAM_ODT_SETTING = -8,
|
||||
};
|
||||
|
||||
struct mrc_mainboard_params {
|
||||
int dram_type;
|
||||
int dram_info_location; /* DRAM_INFO_* */
|
||||
int weaker_odt_settings; /* Apply weaker on-die-termination settings. */
|
||||
int dram_is_slotted; /* mobo has DRAM slots. */
|
||||
/*
|
||||
* The below ODT settings are only honored when !dram_is_slotted.
|
||||
* Aditionally, weaker_odt_settings being non-zero causes
|
||||
* cpu_odt_value to not be honored as weaker_odt_settings have a
|
||||
* special training path.
|
||||
*/
|
||||
int weaker_odt_settings;
|
||||
/* Allowed settings: 60, 80, 100, 120, and 150. */
|
||||
int cpu_odt_value;
|
||||
/* Allowed settings: 60 and 120. */
|
||||
int dram_odt_value;
|
||||
int spd_addrs[NUM_CHANNELS];
|
||||
void *dram_data[NUM_CHANNELS]; /* SPD or Timing specific data. */
|
||||
} __attribute__((packed));
|
||||
|
|
|
|||
|
|
@ -21,10 +21,11 @@
|
|||
#define _BAYTRAIL_RAMSTAGE_H_
|
||||
|
||||
#include <device/device.h>
|
||||
#include <chip.h>
|
||||
|
||||
/* The baytrail_init_pre_device() function is called prior to device
|
||||
* initialization, but it's after console and cbmem has been reinitialized. */
|
||||
void baytrail_init_pre_device(void);
|
||||
void baytrail_init_pre_device(struct soc_intel_baytrail_config *config);
|
||||
void baytrail_init_cpus(device_t dev);
|
||||
void set_max_freq(void);
|
||||
void southcluster_enable_dev(device_t dev);
|
||||
|
|
|
|||
|
|
@ -37,7 +37,13 @@ void *smm_region_start(void);
|
|||
#include <stdint.h>
|
||||
void southcluster_smm_clear_state(void);
|
||||
void southcluster_smm_enable_smi(void);
|
||||
void southcluster_smm_save_gpio_route(uint32_t route);
|
||||
void southcluster_smm_save_param(int param, uint32_t data);
|
||||
#endif
|
||||
|
||||
enum {
|
||||
SMM_SAVE_PARAM_GPIO_ROUTE = 0,
|
||||
SMM_SAVE_PARAM_PCIE_WAKE_ENABLE,
|
||||
SMM_SAVE_PARAM_COUNT
|
||||
};
|
||||
|
||||
#endif /* _BAYTRAIL_SMM_H_ */
|
||||
|
|
|
|||
|
|
@ -70,7 +70,7 @@ static void enable_dev(device_t dev)
|
|||
/* Called at BS_DEV_INIT_CHIPS time -- very early. Just after BS_PRE_DEVICE. */
|
||||
static void soc_init(void *chip_info)
|
||||
{
|
||||
baytrail_init_pre_device();
|
||||
baytrail_init_pre_device(chip_info);
|
||||
}
|
||||
|
||||
struct chip_operations soc_intel_baytrail_ops = {
|
||||
|
|
|
|||
|
|
@ -26,9 +26,10 @@
|
|||
#include <stdint.h>
|
||||
|
||||
struct soc_intel_baytrail_config {
|
||||
uint8_t sata_port_map;
|
||||
uint8_t sata_ahci;
|
||||
uint8_t ide_legacy_combined;
|
||||
uint8_t enable_xdp_tap;
|
||||
uint8_t sata_port_map;
|
||||
uint8_t sata_ahci;
|
||||
uint8_t ide_legacy_combined;
|
||||
uint8_t clkreq_enable;
|
||||
|
||||
/* VR low power settings -- enable PS2 mode for gfx and core */
|
||||
|
|
@ -68,6 +69,9 @@ struct soc_intel_baytrail_config {
|
|||
int scc_acpi_mode;
|
||||
int lpe_acpi_mode;
|
||||
|
||||
/* Allow PCIe devices to wake system from suspend. */
|
||||
int pcie_wake_enable;
|
||||
|
||||
/*
|
||||
* Digital Port Hotplug Enable:
|
||||
* 0x04 = Enabled, 2ms short pulse
|
||||
|
|
|
|||
|
|
@ -30,6 +30,7 @@
|
|||
#include <cpu/x86/smm.h>
|
||||
#include <reg_script.h>
|
||||
|
||||
#include <baytrail/iosf.h>
|
||||
#include <baytrail/msr.h>
|
||||
#include <baytrail/pattrs.h>
|
||||
#include <baytrail/ramstage.h>
|
||||
|
|
@ -103,6 +104,8 @@ void baytrail_init_cpus(device_t dev)
|
|||
struct bus *cpu_bus = dev->link_list;
|
||||
const struct pattrs *pattrs = pattrs_get();
|
||||
struct mp_params mp_params;
|
||||
uint32_t bsmrwac;
|
||||
void *default_smm_area;
|
||||
|
||||
/* Set up MTRRs based on physical address size. */
|
||||
x86_setup_fixed_mtrrs();
|
||||
|
|
@ -116,6 +119,16 @@ void baytrail_init_cpus(device_t dev)
|
|||
mp_params.num_records = ARRAY_SIZE(mp_steps);
|
||||
mp_params.microcode_pointer = pattrs->microcode_patch;
|
||||
|
||||
default_smm_area = backup_default_smm_area();
|
||||
|
||||
/*
|
||||
* Configure the BUNIT to allow dirty cache line evictions in non-SMM
|
||||
* mode for the lines that were dirtied while in SMM mode. Otherwise
|
||||
* the writes would be silently dropped.
|
||||
*/
|
||||
bsmrwac = iosf_bunit_read(BUNIT_SMRWAC) | SAI_IA_UNTRUSTED;
|
||||
iosf_bunit_write(BUNIT_SMRWAC, bsmrwac);
|
||||
|
||||
/* Set package MSRs */
|
||||
reg_script_run(package_msr_script);
|
||||
|
||||
|
|
@ -125,6 +138,8 @@ void baytrail_init_cpus(device_t dev)
|
|||
if (mp_init(cpu_bus, &mp_params)) {
|
||||
printk(BIOS_ERR, "MP initialization failure.\n");
|
||||
}
|
||||
|
||||
restore_default_smm_area(default_smm_area);
|
||||
}
|
||||
|
||||
static void baytrail_core_init(device_t cpu)
|
||||
|
|
|
|||
|
|
@ -192,7 +192,7 @@ static void setup_gpio_route(const struct soc_gpio_map *sus,
|
|||
route_reg |= ROUTE_SCI << (2 * (i + 8));
|
||||
}
|
||||
}
|
||||
southcluster_smm_save_gpio_route(route_reg);
|
||||
southcluster_smm_save_param(SMM_SAVE_PARAM_GPIO_ROUTE, route_reg);
|
||||
}
|
||||
|
||||
static void setup_dirqs(const u8 dirq[GPIO_MAX_DIRQS],
|
||||
|
|
@ -214,7 +214,7 @@ static void setup_dirqs(const u8 dirq[GPIO_MAX_DIRQS],
|
|||
}
|
||||
}
|
||||
|
||||
void setup_soc_gpios(struct soc_gpio_config *config)
|
||||
void setup_soc_gpios(struct soc_gpio_config *config, u8 enable_xdp_tap)
|
||||
{
|
||||
if (config) {
|
||||
setup_gpios(config->ncore, &gpncore_bank);
|
||||
|
|
@ -228,6 +228,14 @@ void setup_soc_gpios(struct soc_gpio_config *config)
|
|||
setup_dirqs(*config->sus_dirq, &gpssus_bank);
|
||||
}
|
||||
|
||||
/* Set on die termination feature with pull up value and
|
||||
* drive the pad high for TAP_TDO and TAP_TMS
|
||||
*/
|
||||
if (!enable_xdp_tap) {
|
||||
printk(BIOS_DEBUG, "Tri-state TDO and TMS\n");
|
||||
write32(GPSSUS_PAD_BASE + 0x2fc, 0xc);
|
||||
write32(GPSSUS_PAD_BASE + 0x2cc, 0xc);
|
||||
}
|
||||
}
|
||||
|
||||
struct soc_gpio_config* __attribute__((weak)) mainboard_get_gpios(void)
|
||||
|
|
|
|||
|
|
@ -22,6 +22,7 @@
|
|||
#include <device/device.h>
|
||||
#include <device/pci.h>
|
||||
#include <device/pci_ids.h>
|
||||
#include <vendorcode/google/chromeos/chromeos.h>
|
||||
|
||||
#include <baytrail/iomap.h>
|
||||
#include <baytrail/iosf.h>
|
||||
|
|
@ -88,14 +89,8 @@ static void nc_read_resources(device_t dev)
|
|||
mmconf = iosf_bunit_read(BUNIT_MMCONF_REG) & ~((1 << 28) - 1);
|
||||
mmio_resource(dev, BUNIT_MMCONF_REG, RES_IN_KiB(mmconf), 256 * 1024);
|
||||
|
||||
/* 0 -> SMM_DEFAULT_BASE cacheable ram. */
|
||||
ram_resource(dev, index++, 0, RES_IN_KiB(SMM_DEFAULT_BASE));
|
||||
/* Default SMM region is cacheable but reserved for coreboot */
|
||||
reserved_ram_resource(dev, index++, RES_IN_KiB(SMM_DEFAULT_BASE),
|
||||
RES_IN_KiB(SMM_DEFAULT_SIZE));
|
||||
|
||||
/* SMM_DEFAULT_BASE + SMM_DEFAULT_SIZE - > 0xa0000 */
|
||||
base_k = RES_IN_KiB(SMM_DEFAULT_BASE + SMM_DEFAULT_SIZE);
|
||||
/* 0 -> 0xa0000 */
|
||||
base_k = RES_IN_KiB(0);
|
||||
size_k = RES_IN_KiB(0xa0000) - base_k;
|
||||
ram_resource(dev, index++, base_k, size_k);
|
||||
|
||||
|
|
@ -132,11 +127,8 @@ static void nc_read_resources(device_t dev)
|
|||
mmio_resource(dev, index++, (0xa0000 >> 10), (0xc0000 - 0xa0000) >> 10);
|
||||
reserved_ram_resource(dev, index++, (0xc0000 >> 10),
|
||||
(0x100000 - 0xc0000) >> 10);
|
||||
#if CONFIG_CHROMEOS_RAMOOPS
|
||||
reserved_ram_resource(dev, index++,
|
||||
CONFIG_CHROMEOS_RAMOOPS_RAM_START >> 10,
|
||||
CONFIG_CHROMEOS_RAMOOPS_RAM_SIZE >> 10);
|
||||
#endif
|
||||
|
||||
chromeos_reserve_ram_oops(dev, index++);
|
||||
}
|
||||
|
||||
static struct device_operations nc_ops = {
|
||||
|
|
|
|||
|
|
@ -27,6 +27,7 @@
|
|||
#include <baytrail/pci_devs.h>
|
||||
#include <baytrail/pcie.h>
|
||||
#include <baytrail/ramstage.h>
|
||||
#include <baytrail/smm.h>
|
||||
|
||||
#include "chip.h"
|
||||
|
||||
|
|
@ -174,10 +175,15 @@ static void check_device_present(device_t dev)
|
|||
static void byt_pcie_enable(device_t dev)
|
||||
{
|
||||
if (is_first_port(dev)) {
|
||||
struct soc_intel_baytrail_config *config = dev->chip_info;
|
||||
uint32_t reg = pci_read_config32(dev, PHYCTL2_IOSFBCTL);
|
||||
pll_en_off = !!(reg & PLL_OFF_EN);
|
||||
|
||||
strpfusecfg = pci_read_config32(dev, STRPFUSECFG);
|
||||
|
||||
if (config && config->pcie_wake_enable)
|
||||
southcluster_smm_save_param(
|
||||
SMM_SAVE_PARAM_PCIE_WAKE_ENABLE, 1);
|
||||
}
|
||||
|
||||
/* Check if device is enabled in strapping. */
|
||||
|
|
|
|||
|
|
@ -184,9 +184,9 @@ static void s3_resume_prepare(void)
|
|||
s3_save_acpi_wake_source(gnvs);
|
||||
}
|
||||
|
||||
void baytrail_init_pre_device(void)
|
||||
void baytrail_init_pre_device(struct soc_intel_baytrail_config *config)
|
||||
{
|
||||
struct soc_gpio_config *config;
|
||||
struct soc_gpio_config *gpio_config;
|
||||
|
||||
fill_in_pattrs();
|
||||
|
||||
|
|
@ -200,8 +200,8 @@ void baytrail_init_pre_device(void)
|
|||
baytrail_run_reference_code();
|
||||
|
||||
/* Get GPIO initial states from mainboard */
|
||||
config = mainboard_get_gpios();
|
||||
setup_soc_gpios(config);
|
||||
gpio_config = mainboard_get_gpios();
|
||||
setup_soc_gpios(gpio_config, config->enable_xdp_tap);
|
||||
|
||||
baytrail_init_scc();
|
||||
}
|
||||
|
|
|
|||
|
|
@ -31,13 +31,12 @@
|
|||
#include <baytrail/pmc.h>
|
||||
#include <baytrail/smm.h>
|
||||
|
||||
/* Save the gpio route register. The settings are committed from
|
||||
* southcluster_smm_enable_smi(). */
|
||||
static uint32_t gpio_route;
|
||||
/* Save settings which will be committed in SMI functions. */
|
||||
static uint32_t smm_save_params[SMM_SAVE_PARAM_COUNT];
|
||||
|
||||
void southcluster_smm_save_gpio_route(uint32_t route)
|
||||
void southcluster_smm_save_param(int param, uint32_t data)
|
||||
{
|
||||
gpio_route = route;
|
||||
smm_save_params[param] = data;
|
||||
}
|
||||
|
||||
void southcluster_smm_clear_state(void)
|
||||
|
|
@ -70,7 +69,7 @@ static void southcluster_smm_route_gpios(void)
|
|||
const unsigned long gpio_rout = PMC_BASE_ADDRESS + GPIO_ROUT;
|
||||
const unsigned short alt_gpio_smi = ACPI_BASE_ADDRESS + ALT_GPIO_SMI;
|
||||
uint32_t alt_gpio_reg = 0;
|
||||
uint32_t route_reg = gpio_route;
|
||||
uint32_t route_reg = smm_save_params[SMM_SAVE_PARAM_GPIO_ROUTE];
|
||||
int i;
|
||||
|
||||
printk(BIOS_DEBUG, "GPIO_ROUT = %08x\n", route_reg);
|
||||
|
|
@ -92,10 +91,12 @@ static void southcluster_smm_route_gpios(void)
|
|||
|
||||
void southcluster_smm_enable_smi(void)
|
||||
{
|
||||
uint16_t pm1_events = PWRBTN_EN | GBL_EN;
|
||||
|
||||
printk(BIOS_DEBUG, "Enabling SMIs.\n");
|
||||
/* Configure events Disable pcie wake. */
|
||||
enable_pm1(PWRBTN_EN | GBL_EN | PCIEXPWAK_DIS);
|
||||
if (!smm_save_params[SMM_SAVE_PARAM_PCIE_WAKE_ENABLE])
|
||||
pm1_events |= PCIEXPWAK_DIS;
|
||||
enable_pm1(pm1_events);
|
||||
disable_gpe(PME_B0_EN);
|
||||
|
||||
/* Set up the GPIO route. */
|
||||
|
|
|
|||
|
|
@ -20,6 +20,7 @@
|
|||
|
||||
#include <stdint.h>
|
||||
#include <arch/io.h>
|
||||
#include <arch/acpi.h>
|
||||
#include <bootstate.h>
|
||||
#include <cbmem.h>
|
||||
#include <console/console.h>
|
||||
|
|
@ -29,6 +30,7 @@
|
|||
#include <device/pci_ids.h>
|
||||
#include <pc80/mc146818rtc.h>
|
||||
#include <romstage_handoff.h>
|
||||
#include <drivers/uart/uart8250reg.h>
|
||||
|
||||
#include <baytrail/iomap.h>
|
||||
#include <baytrail/irq.h>
|
||||
|
|
@ -144,6 +146,42 @@ static void sc_rtc_init(void)
|
|||
rtc_init(rtc_fail);
|
||||
}
|
||||
|
||||
/*
|
||||
* The UART hardware loses power while in suspend. Because of this the kernel
|
||||
* can hang because it doesn't re-initialize serial ports it is using for
|
||||
* consoles at resume time. The following function configures the UART
|
||||
* if the hardware is enabled though it may not be the correct baud rate
|
||||
* or configuration. This is definitely a hack, but it helps the kernel
|
||||
* along.
|
||||
*/
|
||||
static void com1_configure_resume(device_t dev)
|
||||
{
|
||||
const uint16_t port = 0x3f8;
|
||||
|
||||
/* Is the UART I/O port eanbled? */
|
||||
if (!(pci_read_config32(dev, UART_CONT) & 1))
|
||||
return;
|
||||
|
||||
/* Disable interrupts */
|
||||
outb(0x0, port + UART8250_IER);
|
||||
|
||||
/* Enable FIFOs */
|
||||
outb(UART8250_FCR_FIFO_EN, port + UART8250_FCR);
|
||||
|
||||
/* assert DTR and RTS so the other end is happy */
|
||||
outb(UART8250_MCR_DTR | UART8250_MCR_RTS, port + UART8250_MCR);
|
||||
|
||||
/* DLAB on */
|
||||
outb(UART8250_LCR_DLAB | 3, port + UART8250_LCR);
|
||||
|
||||
/* Set Baud Rate Divisor. 1 ==> 115200 Baud */
|
||||
outb(1, port + UART8250_DLL);
|
||||
outb(0, port + UART8250_DLM);
|
||||
|
||||
/* Set to 3 for 8N1 */
|
||||
outb(3, port + UART8250_LCR);
|
||||
}
|
||||
|
||||
static void sc_init(device_t dev)
|
||||
{
|
||||
int i;
|
||||
|
|
@ -176,6 +214,9 @@ static void sc_init(device_t dev)
|
|||
write32(gen_pmcon1,
|
||||
read32(gen_pmcon1) & ~DIS_SLP_X_STRCH_SUS_UP);
|
||||
}
|
||||
|
||||
if (acpi_slp_type == 3)
|
||||
com1_configure_resume(dev);
|
||||
}
|
||||
|
||||
/*
|
||||
|
|
|
|||
Loading…
Reference in New Issue