mainboard: Add ASRock H81M-HDS
Tested with GRUB 2.02 as a payload, booting Debian GNU/Linux 9.5 with kernel 4.9. This board works quite well under coreboot. A list of what works and what doesn't can be found in the documentation part of this commit. The file `data.vbt` matches the VBT in the latest stable version of the vendor firmware (version 2.20). Change-Id: I53483bb9fa335e86e85dfc487fef03fce4b85e2a Signed-off-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-on: https://review.coreboot.org/29390 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
This commit is contained in:
Tristan Corrick
Patrick Georgi
parent
b2632cec0e
commit
3693294112
|
|
@ -0,0 +1,146 @@
|
||||||
|
# ASRock H81M-HDS
|
||||||
|
|
||||||
|
This page describes how to run coreboot on the [ASRock H81M-HDS].
|
||||||
|
|
||||||
|
## Required proprietary blobs
|
||||||
|
|
||||||
|
This board currently requires a proprietary blob in order to initialise
|
||||||
|
the RAM and a few other components. The blob largely consists of Intel's
|
||||||
|
Memory Reference Code (shortened to mrc), and is just under 200 KiB
|
||||||
|
in size. It is also known as a system agent binary. Unfortunately,
|
||||||
|
it is not currently possible to distribute this as part of coreboot.
|
||||||
|
However, the mrc can be obtained from a Haswell Chromebook firmware
|
||||||
|
image, and you might find one online. The mrc from a ChromeOS image can
|
||||||
|
be extracted with the following command. If extracting from a "standard"
|
||||||
|
coreboot image, omit `-r RO_SECTION`.
|
||||||
|
|
||||||
|
```bash
|
||||||
|
cbfstool coreboot.rom extract -f mrc.bin -n mrc.bin -r RO_SECTION
|
||||||
|
```
|
||||||
|
|
||||||
|
Now, place mrc.bin in the root of the coreboot directory.
|
||||||
|
Alternatively, place it anywhere you want, and set `MRC_FILE` to its
|
||||||
|
location when building coreboot.
|
||||||
|
|
||||||
|
## Building coreboot
|
||||||
|
|
||||||
|
A fully working image should be possible just by setting your MAC
|
||||||
|
address and obtaining the Haswell mrc. You can set the basic config
|
||||||
|
with the following commands. However, it is strongly advised to use
|
||||||
|
`make menuconfig` afterwards (or instead), so that you can see all of
|
||||||
|
the settings.
|
||||||
|
|
||||||
|
```bash
|
||||||
|
make distclean # Note: this will remove your current config, if it exists.
|
||||||
|
touch .config
|
||||||
|
./util/scripts/config --enable VENDOR_ASROCK
|
||||||
|
./util/scripts/config --enable BOARD_ASROCK_H81M_HDS
|
||||||
|
./util/scripts/config --enable HAVE_MRC
|
||||||
|
./util/scripts/config --set-str REALTEK_8168_MACADDRESS "xx:xx:xx:xx:xx:xx" # Fill this in!
|
||||||
|
make olddefconfig
|
||||||
|
```
|
||||||
|
|
||||||
|
If you don't plan on using coreboot's serial console to collect logs,
|
||||||
|
you might want to disable it at this point (`./util/scripts/config
|
||||||
|
--disable CONSOLE_SERIAL`). It should reduce the boot time by several
|
||||||
|
seconds. However, a more flexible method is to change the console log
|
||||||
|
level from within an OS using `util/nvramtool`, or with the `nvramcui`
|
||||||
|
payload.
|
||||||
|
|
||||||
|
Now, run `make` to build the coreboot image.
|
||||||
|
|
||||||
|
## Flashing coreboot
|
||||||
|
|
||||||
|
### Internal programming
|
||||||
|
|
||||||
|
The main SPI flash can be accessed using [flashrom]. By default, only
|
||||||
|
the BIOS region of the flash is writable. If you wish to change any
|
||||||
|
other region, such as the Management Engine or firmware descriptor, then
|
||||||
|
an external programmer is required (unless you find a clever way around
|
||||||
|
the flash protection).
|
||||||
|
|
||||||
|
The following command may be used to flash coreboot:
|
||||||
|
|
||||||
|
```bash
|
||||||
|
sudo flashrom -p internal --ifd -i bios --noverify-all -w coreboot.rom
|
||||||
|
```
|
||||||
|
|
||||||
|
The use of `--noverify-all` is required since the Management Engine
|
||||||
|
region is not readable even by the host.
|
||||||
|
|
||||||
|
### External programming
|
||||||
|
|
||||||
|
The flash chip is a 4 MiB socketed DIP-8 chip. Specifically, it's a
|
||||||
|
Winbond W25Q32FV, whose datasheet can be found [here][W25Q32FV].
|
||||||
|
The chip is located to the bottom right-hand side of the board. For
|
||||||
|
a precise location, refer to section 1.4 (Motherboard Layout) of the
|
||||||
|
[board manual], where the chip is labelled "32Mb BIOS". Take note of
|
||||||
|
the chip's orientation, remove it from its socket, and flash it with
|
||||||
|
an external programmer. For reference, the notch in the chip should be
|
||||||
|
facing towards the bottom of the board.
|
||||||
|
|
||||||
|
## Known issues
|
||||||
|
|
||||||
|
- PCIe graphics is non-functional. The PCIe 16x slot doesn't work
|
||||||
|
with other devices, either.
|
||||||
|
|
||||||
|
- The VGA port doesn't work until the OS reinitialises the display.
|
||||||
|
|
||||||
|
- There is no automatic, OS-independent fan control. This is because
|
||||||
|
the super I/O hardware monitor can only obtain valid CPU temperature
|
||||||
|
readings from the PECI agent, but the required driver doesn't exist
|
||||||
|
in coreboot. The `coretemp` driver can still be used for accurate CPU
|
||||||
|
temperature readings from an OS.
|
||||||
|
|
||||||
|
## Untested
|
||||||
|
|
||||||
|
- parallel port
|
||||||
|
- PS/2 keyboard
|
||||||
|
- EHCI debug
|
||||||
|
- TPM
|
||||||
|
- infrared module
|
||||||
|
- chassis intrusion header
|
||||||
|
- chassis speaker header
|
||||||
|
|
||||||
|
## Working
|
||||||
|
|
||||||
|
- USB
|
||||||
|
- S3 suspend/resume
|
||||||
|
- Gigabit Ethernet
|
||||||
|
- integrated graphics
|
||||||
|
- PCIe (but not the 16x slot, see [Known issues](#known-issues))
|
||||||
|
- SATA
|
||||||
|
- PS/2 mouse
|
||||||
|
- serial port
|
||||||
|
- hardware monitor (see [Known issues](#known-issues))
|
||||||
|
- onboard audio
|
||||||
|
- front panel audio
|
||||||
|
- initialisation with Haswell mrc version 1.6.1 build 2
|
||||||
|
- graphics init with libgfxinit (see [Known issues](#known-issues))
|
||||||
|
- flashrom under the vendor firmware
|
||||||
|
- flashrom under coreboot
|
||||||
|
- Wake-on-LAN
|
||||||
|
- Using `me_cleaner`
|
||||||
|
|
||||||
|
## Technology
|
||||||
|
|
||||||
|
```eval_rst
|
||||||
|
+------------------+--------------------------------------------------+
|
||||||
|
| Northbridge | Intel Haswell |
|
||||||
|
+------------------+--------------------------------------------------+
|
||||||
|
| Southbridge | Intel Lynx Point (H81) |
|
||||||
|
+------------------+--------------------------------------------------+
|
||||||
|
| CPU | Intel Haswell (LGA1150) |
|
||||||
|
+------------------+--------------------------------------------------+
|
||||||
|
| Super I/O | Nuvoton NCT6776 |
|
||||||
|
+------------------+--------------------------------------------------+
|
||||||
|
| EC | None |
|
||||||
|
+------------------+--------------------------------------------------+
|
||||||
|
| Coprocessor | Intel Management Engine |
|
||||||
|
+------------------+--------------------------------------------------+
|
||||||
|
```
|
||||||
|
|
||||||
|
[ASRock H81M-HDS]: https://www.asrock.com/mb/Intel/H81M-HDS/
|
||||||
|
[W25Q32FV]: https://www.winbond.com/resource-files/w25q32fv%20revi%2010202015.pdf
|
||||||
|
[flashrom]: https://flashrom.org/Flashrom
|
||||||
|
[Board manual]: http://asrock.pc.cdn.bitgravity.com/Manual/H81M-HDS.pdf
|
||||||
|
|
@ -6,6 +6,10 @@ This section contains documentation about coreboot on specific mainboards.
|
||||||
|
|
||||||
- [P8H61-M LX](asus/p8h61-m_lx.md)
|
- [P8H61-M LX](asus/p8h61-m_lx.md)
|
||||||
|
|
||||||
|
## ASRock
|
||||||
|
|
||||||
|
- [H81M-HDS](asrock/h81m-hds.md)
|
||||||
|
|
||||||
## Cavium
|
## Cavium
|
||||||
|
|
||||||
- [CN81XX EVB SFF](cavium/cn8100_sff_evb.md)
|
- [CN81XX EVB SFF](cavium/cn8100_sff_evb.md)
|
||||||
|
|
|
||||||
|
|
@ -0,0 +1,89 @@
|
||||||
|
##
|
||||||
|
## This file is part of the coreboot project.
|
||||||
|
##
|
||||||
|
## Copyright (C) 2018 Tristan Corrick <tristan@corrick.kiwi>
|
||||||
|
##
|
||||||
|
## This program is free software: you can redistribute it and/or modify
|
||||||
|
## it under the terms of the GNU General Public License as published by
|
||||||
|
## the Free Software Foundation, either version 2 of the License, or
|
||||||
|
## (at your option) any later version.
|
||||||
|
##
|
||||||
|
## This program is distributed in the hope that it will be useful,
|
||||||
|
## but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
## GNU General Public License for more details.
|
||||||
|
##
|
||||||
|
|
||||||
|
if BOARD_ASROCK_H81M_HDS
|
||||||
|
|
||||||
|
config BOARD_SPECIFIC_OPTIONS
|
||||||
|
def_bool y
|
||||||
|
select BOARD_ROMSIZE_KB_4096
|
||||||
|
select CPU_INTEL_HASWELL
|
||||||
|
select HAVE_ACPI_RESUME
|
||||||
|
select HAVE_ACPI_TABLES
|
||||||
|
select HAVE_OPTION_TABLE
|
||||||
|
select HAVE_CMOS_DEFAULT
|
||||||
|
select HAVE_SMI_HANDLER
|
||||||
|
select INTEL_GMA_HAVE_VBT
|
||||||
|
select INTEL_INT15
|
||||||
|
select MAINBOARD_HAS_LIBGFXINIT
|
||||||
|
select NORTHBRIDGE_INTEL_HASWELL
|
||||||
|
select REALTEK_8168_RESET
|
||||||
|
select RT8168_SET_LED_MODE
|
||||||
|
select SERIRQ_CONTINUOUS_MODE
|
||||||
|
select SOUTHBRIDGE_INTEL_LYNXPOINT
|
||||||
|
select SUPERIO_NUVOTON_NCT6776
|
||||||
|
select SUPERIO_NUVOTON_NCT6776_COM_A
|
||||||
|
select TSC_MONOTONIC_TIMER
|
||||||
|
|
||||||
|
config CBFS_SIZE
|
||||||
|
hex
|
||||||
|
default 0x200000
|
||||||
|
|
||||||
|
#
|
||||||
|
# The override of GFX_GMA_CPU_VARIANT should be removed once the patches
|
||||||
|
# for dynamic CPU detection are merged in libgfxinit.
|
||||||
|
#
|
||||||
|
config GFX_GMA_CPU_VARIANT
|
||||||
|
string
|
||||||
|
default "Normal"
|
||||||
|
|
||||||
|
config MAINBOARD_DIR
|
||||||
|
string
|
||||||
|
default asrock/h81m-hds
|
||||||
|
|
||||||
|
config MAINBOARD_PART_NUMBER
|
||||||
|
string
|
||||||
|
default "H81M-HDS"
|
||||||
|
|
||||||
|
config MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
|
||||||
|
hex
|
||||||
|
default 0x8c5c
|
||||||
|
|
||||||
|
config MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
|
||||||
|
hex
|
||||||
|
default 0x1849
|
||||||
|
|
||||||
|
# This is overridden if CMOS is used for configuration values.
|
||||||
|
config MAINBOARD_POWER_ON_AFTER_POWER_FAIL
|
||||||
|
bool
|
||||||
|
default n
|
||||||
|
|
||||||
|
config MAX_CPUS
|
||||||
|
int
|
||||||
|
default 8
|
||||||
|
|
||||||
|
config MMCONF_BASE_ADDRESS
|
||||||
|
hex
|
||||||
|
default 0xf0000000
|
||||||
|
|
||||||
|
#
|
||||||
|
# Since this is a desktop board, the assumption is made that most users
|
||||||
|
# would want CMOS configuration enabled by default.
|
||||||
|
#
|
||||||
|
config USE_OPTION_TABLE
|
||||||
|
bool
|
||||||
|
default y
|
||||||
|
|
||||||
|
endif
|
||||||
|
|
@ -0,0 +1,2 @@
|
||||||
|
config BOARD_ASROCK_H81M_HDS
|
||||||
|
bool "H81M-HDS"
|
||||||
|
|
@ -0,0 +1,17 @@
|
||||||
|
##
|
||||||
|
## This file is part of the coreboot project.
|
||||||
|
##
|
||||||
|
## Copyright (C) 2018 Tristan Corrick <tristan@corrick.kiwi>
|
||||||
|
##
|
||||||
|
## This program is free software: you can redistribute it and/or modify
|
||||||
|
## it under the terms of the GNU General Public License as published by
|
||||||
|
## the Free Software Foundation, either version 2 of the License, or
|
||||||
|
## (at your option) any later version.
|
||||||
|
##
|
||||||
|
## This program is distributed in the hope that it will be useful,
|
||||||
|
## but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
## GNU General Public License for more details.
|
||||||
|
##
|
||||||
|
|
||||||
|
ramstage-$(CONFIG_MAINBOARD_USE_LIBGFXINIT) += gma-mainboard.ads
|
||||||
|
|
@ -0,0 +1,24 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the coreboot project.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2017 Tristan Corrick <tristan@corrick.kiwi>
|
||||||
|
*
|
||||||
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation, either version 2 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*/
|
||||||
|
|
||||||
|
Method(_WAK, 1)
|
||||||
|
{
|
||||||
|
Return (Package() { 0, 0 })
|
||||||
|
}
|
||||||
|
|
||||||
|
Method(_PTS, 1)
|
||||||
|
{
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,26 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the coreboot project.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2018 Tristan Corrick <tristan@corrick.kiwi>
|
||||||
|
*
|
||||||
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation, either version 2 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#define SUPERIO_DEV SIO0
|
||||||
|
#define SUPERIO_PNP_BASE 0x2e
|
||||||
|
#define NCT6776_SHOW_PP
|
||||||
|
#define NCT6776_SHOW_SP1
|
||||||
|
#define NCT6776_SHOW_KBC
|
||||||
|
#define NCT6776_SHOW_HWM
|
||||||
|
|
||||||
|
#undef NCT6776_SHOW_GPIO
|
||||||
|
|
||||||
|
#include <superio/nuvoton/nct6776/acpi/superio.asl>
|
||||||
|
|
@ -0,0 +1,21 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the coreboot project.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2018 Tristan Corrick <tristan@corrick.kiwi>
|
||||||
|
*
|
||||||
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation, either version 2 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <southbridge/intel/lynxpoint/nvs.h>
|
||||||
|
|
||||||
|
void acpi_create_gnvs(global_nvs_t *gnvs)
|
||||||
|
{
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,7 @@
|
||||||
|
Category: desktop
|
||||||
|
Board URL: https://www.asrock.com/mb/Intel/H81M-HDS/
|
||||||
|
ROM package: DIP-8
|
||||||
|
ROM protocol: SPI
|
||||||
|
ROM socketed: y
|
||||||
|
Flashrom support: y
|
||||||
|
Release year: 2013
|
||||||
|
|
@ -0,0 +1,4 @@
|
||||||
|
boot_option=Fallback
|
||||||
|
debug_level=Debug
|
||||||
|
nmi=Enable
|
||||||
|
power_on_after_fail=Disable
|
||||||
|
|
@ -0,0 +1,90 @@
|
||||||
|
##
|
||||||
|
## This file is part of the coreboot project.
|
||||||
|
##
|
||||||
|
## Copyright (C) 2007-2008 coresystems GmbH
|
||||||
|
## Copyright (C) 2014 Vladimir Serbinenko
|
||||||
|
##
|
||||||
|
## This program is free software; you can redistribute it and/or modify
|
||||||
|
## it under the terms of the GNU General Public License as published by
|
||||||
|
## the Free Software Foundation; version 2 of the License.
|
||||||
|
##
|
||||||
|
## This program is distributed in the hope that it will be useful,
|
||||||
|
## but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
## GNU General Public License for more details.
|
||||||
|
##
|
||||||
|
|
||||||
|
# -----------------------------------------------------------------
|
||||||
|
entries
|
||||||
|
|
||||||
|
# -----------------------------------------------------------------
|
||||||
|
# Status Register A
|
||||||
|
# -----------------------------------------------------------------
|
||||||
|
# Status Register B
|
||||||
|
# -----------------------------------------------------------------
|
||||||
|
# Status Register C
|
||||||
|
#96 4 r 0 status_c_rsvd
|
||||||
|
#100 1 r 0 uf_flag
|
||||||
|
#101 1 r 0 af_flag
|
||||||
|
#102 1 r 0 pf_flag
|
||||||
|
#103 1 r 0 irqf_flag
|
||||||
|
# -----------------------------------------------------------------
|
||||||
|
# Status Register D
|
||||||
|
#104 7 r 0 status_d_rsvd
|
||||||
|
#111 1 r 0 valid_cmos_ram
|
||||||
|
# -----------------------------------------------------------------
|
||||||
|
# Diagnostic Status Register
|
||||||
|
#112 8 r 0 diag_rsvd1
|
||||||
|
|
||||||
|
# -----------------------------------------------------------------
|
||||||
|
0 120 r 0 reserved_memory
|
||||||
|
#120 264 r 0 unused
|
||||||
|
|
||||||
|
# -----------------------------------------------------------------
|
||||||
|
# RTC_BOOT_BYTE (coreboot hardcoded)
|
||||||
|
384 1 e 3 boot_option
|
||||||
|
388 4 h 0 reboot_counter
|
||||||
|
|
||||||
|
# -----------------------------------------------------------------
|
||||||
|
# coreboot config options: console
|
||||||
|
#392 3 r 0 unused
|
||||||
|
395 4 e 4 debug_level
|
||||||
|
#399 1 r 0 unused
|
||||||
|
|
||||||
|
#400 8 r 0 reserved for century byte
|
||||||
|
|
||||||
|
# coreboot config options: southbridge
|
||||||
|
408 1 e 1 nmi
|
||||||
|
409 2 e 1 power_on_after_fail
|
||||||
|
|
||||||
|
# coreboot config options: check sums
|
||||||
|
984 16 h 0 check_sum
|
||||||
|
|
||||||
|
# -----------------------------------------------------------------
|
||||||
|
|
||||||
|
enumerations
|
||||||
|
|
||||||
|
#ID value text
|
||||||
|
1 0 Disable
|
||||||
|
1 1 Enable
|
||||||
|
|
||||||
|
2 0 Enable
|
||||||
|
2 1 Disable
|
||||||
|
|
||||||
|
3 0 Fallback
|
||||||
|
3 1 Normal
|
||||||
|
|
||||||
|
4 0 Emergency
|
||||||
|
4 1 Alert
|
||||||
|
4 2 Critical
|
||||||
|
4 3 Error
|
||||||
|
4 4 Warning
|
||||||
|
4 5 Notice
|
||||||
|
4 6 Info
|
||||||
|
4 7 Debug
|
||||||
|
4 8 Spew
|
||||||
|
|
||||||
|
# -----------------------------------------------------------------
|
||||||
|
checksums
|
||||||
|
|
||||||
|
checksum 392 415 984
|
||||||
Binary file not shown.
|
|
@ -0,0 +1,173 @@
|
||||||
|
##
|
||||||
|
## This file is part of the coreboot project.
|
||||||
|
##
|
||||||
|
## Copyright (C) 2018 Tristan Corrick <tristan@corrick.kiwi>
|
||||||
|
##
|
||||||
|
## This program is free software: you can redistribute it and/or modify
|
||||||
|
## it under the terms of the GNU General Public License as published by
|
||||||
|
## the Free Software Foundation, either version 2 of the License, or
|
||||||
|
## (at your option) any later version.
|
||||||
|
##
|
||||||
|
## This program is distributed in the hope that it will be useful,
|
||||||
|
## but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
## GNU General Public License for more details.
|
||||||
|
##
|
||||||
|
|
||||||
|
chip northbridge/intel/haswell
|
||||||
|
register "gpu_ddi_e_connected" = "1"
|
||||||
|
|
||||||
|
device cpu_cluster 0 on
|
||||||
|
chip cpu/intel/haswell
|
||||||
|
register "c1_acpower" = "1"
|
||||||
|
register "c1_battery" = "1"
|
||||||
|
register "c2_acpower" = "3"
|
||||||
|
register "c2_battery" = "3"
|
||||||
|
register "c3_acpower" = "5"
|
||||||
|
register "c3_battery" = "5"
|
||||||
|
|
||||||
|
device lapic 0 on end
|
||||||
|
device lapic 0xacac off end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
|
||||||
|
device domain 0 on
|
||||||
|
device pci 00.0 on # Host bridge
|
||||||
|
subsystemid 0x1849 0x0c00
|
||||||
|
end
|
||||||
|
|
||||||
|
device pci 01.0 on # PCIe graphics
|
||||||
|
subsystemid 0x1849 0x0c01
|
||||||
|
end
|
||||||
|
|
||||||
|
device pci 02.0 on # VGA controller
|
||||||
|
subsystemid 0x1849 0x0402
|
||||||
|
end
|
||||||
|
|
||||||
|
device pci 03.0 on # Mini-HD audio
|
||||||
|
subsystemid 0x1849 0x0c0c
|
||||||
|
end
|
||||||
|
|
||||||
|
chip southbridge/intel/lynxpoint
|
||||||
|
register "pirqa_routing" = "0x8b"
|
||||||
|
register "pirqb_routing" = "0x80"
|
||||||
|
register "pirqc_routing" = "0x8b"
|
||||||
|
register "pirqd_routing" = "0x8a"
|
||||||
|
register "pirqe_routing" = "0x80"
|
||||||
|
register "pirqf_routing" = "0x80"
|
||||||
|
register "pirqg_routing" = "0x80"
|
||||||
|
register "pirqh_routing" = "0x8a"
|
||||||
|
|
||||||
|
register "sata_ahci" = "1"
|
||||||
|
register "sata_port_map" = "0x33"
|
||||||
|
|
||||||
|
register "gen1_dec" = "0x00000295" # Super I/O HWM
|
||||||
|
|
||||||
|
device pci 14.0 on # xHCI controller
|
||||||
|
subsystemid 0x1849 0x8c31
|
||||||
|
end
|
||||||
|
device pci 16.0 on # Management Engine interface 1
|
||||||
|
subsystemid 0x1849 0x8c3a
|
||||||
|
end
|
||||||
|
device pci 16.1 off end # Management Engine interface 2
|
||||||
|
device pci 16.2 off end # Management Engine IDE-R
|
||||||
|
device pci 16.3 off end # Management Engine KT
|
||||||
|
device pci 19.0 off end # Intel Gigabit Ethernet
|
||||||
|
device pci 1a.0 on # EHCI controller #2
|
||||||
|
subsystemid 0x1849 0x8c2d
|
||||||
|
end
|
||||||
|
device pci 1b.0 on # HD audio controller
|
||||||
|
subsystemid 0x1849 0x7662
|
||||||
|
end
|
||||||
|
device pci 1c.0 on # PCIe port #1
|
||||||
|
subsystemid 0x1849 0x8c10
|
||||||
|
end
|
||||||
|
device pci 1c.1 off end # PCIe port #2
|
||||||
|
device pci 1c.2 off end # PCIe port #3
|
||||||
|
device pci 1c.3 on # Realtek Gigabit Ethernet
|
||||||
|
subsystemid 0x1849 0x8c16
|
||||||
|
chip drivers/net
|
||||||
|
register "customized_leds" = "0x0824"
|
||||||
|
device pci 00.0 on
|
||||||
|
subsystemid 0x1849 0x8168
|
||||||
|
end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
device pci 1c.4 on # ASMedia USB controller
|
||||||
|
subsystemid 0x1849 0x8c18
|
||||||
|
device pci 00.0 on
|
||||||
|
subsystemid 0x1849 0x1042
|
||||||
|
end
|
||||||
|
end
|
||||||
|
device pci 1c.5 on # PCIe 1x slot
|
||||||
|
subsystemid 0x1849 0x8c1a
|
||||||
|
end
|
||||||
|
device pci 1c.6 off end # PCIe port #7
|
||||||
|
device pci 1c.7 off end # PCIe port #8
|
||||||
|
device pci 1d.0 on # EHCI controller #1
|
||||||
|
subsystemid 0x1849 0x8c26
|
||||||
|
end
|
||||||
|
device pci 1f.0 on # LPC bridge
|
||||||
|
subsystemid 0x1849 0x8c5c
|
||||||
|
|
||||||
|
chip superio/nuvoton/nct6776
|
||||||
|
device pnp 2e.0 off end # Floppy
|
||||||
|
device pnp 2e.1 on # Parallel
|
||||||
|
io 0x60 = 0x0378
|
||||||
|
irq 0x70 = 7
|
||||||
|
drq 0x74 = 4 # No DMA
|
||||||
|
irq 0xf0 = 0x3c # Printer mode
|
||||||
|
end
|
||||||
|
device pnp 2e.2 on # UART A
|
||||||
|
io 0x60 = 0x03f8
|
||||||
|
irq 0x70 = 4
|
||||||
|
end
|
||||||
|
device pnp 2e.3 on # IR
|
||||||
|
io 0x60 = 0x02f8
|
||||||
|
irq 0x70 = 3
|
||||||
|
end
|
||||||
|
device pnp 2e.5 on # PS/2 KBC
|
||||||
|
io 0x60 = 0x0060
|
||||||
|
io 0x62 = 0x0064
|
||||||
|
irq 0x70 = 1 # Keyboard
|
||||||
|
irq 0x72 = 12 # Mouse
|
||||||
|
end
|
||||||
|
device pnp 2e.6 off end # CIR
|
||||||
|
device pnp 2e.7 off end # GPIO8
|
||||||
|
device pnp 2e.107 off end # GPIO9
|
||||||
|
device pnp 2e.8 off end # WDT
|
||||||
|
device pnp 2e.108 off end # GPIO0
|
||||||
|
device pnp 2e.208 off end # GPIOA
|
||||||
|
device pnp 2e.308 off end # GPIO base
|
||||||
|
device pnp 2e.109 off end # GPIO1
|
||||||
|
device pnp 2e.209 off end # GPIO2
|
||||||
|
device pnp 2e.309 off end # GPIO3
|
||||||
|
device pnp 2e.409 off end # GPIO4
|
||||||
|
device pnp 2e.509 off end # GPIO5
|
||||||
|
device pnp 2e.609 off end # GPIO6
|
||||||
|
device pnp 2e.709 off end # GPIO7
|
||||||
|
device pnp 2e.a off end # ACPI
|
||||||
|
device pnp 2e.b on # HWM, LED
|
||||||
|
io 0x60 = 0x0290
|
||||||
|
io 0x62 = 0
|
||||||
|
irq 0x70 = 0
|
||||||
|
end
|
||||||
|
device pnp 2e.d off end # VID
|
||||||
|
device pnp 2e.e off end # CIR wake-up
|
||||||
|
device pnp 2e.f off end # GPIO PP/OD
|
||||||
|
device pnp 2e.14 off end # SVID
|
||||||
|
device pnp 2e.16 off end # Deep sleep
|
||||||
|
device pnp 2e.17 off end # GPIOA
|
||||||
|
end
|
||||||
|
end
|
||||||
|
device pci 1f.2 on # SATA controller 1
|
||||||
|
subsystemid 0x1849 0x8c02
|
||||||
|
end
|
||||||
|
device pci 1f.3 on # SMBus
|
||||||
|
subsystemid 0x1849 0x8c22
|
||||||
|
end
|
||||||
|
device pci 1f.5 off end # SATA controller 2
|
||||||
|
device pci 1f.6 off end # Thermal
|
||||||
|
end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
|
@ -0,0 +1,41 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the coreboot project.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2018 Tristan Corrick <tristan@corrick.kiwi>
|
||||||
|
*
|
||||||
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation, either version 2 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*/
|
||||||
|
|
||||||
|
DefinitionBlock(
|
||||||
|
"dsdt.aml",
|
||||||
|
"DSDT",
|
||||||
|
0x03, /* DSDT Revision: ACPI v3.0 */
|
||||||
|
"COREv4", /* OEM ID */
|
||||||
|
"COREBOOT", /* OEM Table ID */
|
||||||
|
0x20181031 /* OEM Revision */
|
||||||
|
)
|
||||||
|
{
|
||||||
|
#include "acpi/platform.asl"
|
||||||
|
#include <southbridge/intel/lynxpoint/acpi/platform.asl>
|
||||||
|
#include <southbridge/intel/lynxpoint/acpi/globalnvs.asl>
|
||||||
|
#include <southbridge/intel/lynxpoint/acpi/sleepstates.asl>
|
||||||
|
#include <cpu/intel/haswell/acpi/cpu.asl>
|
||||||
|
|
||||||
|
Scope (\_SB)
|
||||||
|
{
|
||||||
|
Device (PCI0)
|
||||||
|
{
|
||||||
|
#include <northbridge/intel/haswell/acpi/haswell.asl>
|
||||||
|
#include <southbridge/intel/lynxpoint/acpi/pch.asl>
|
||||||
|
#include <drivers/intel/gma/acpi/default_brightness_levels.asl>
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,31 @@
|
||||||
|
--
|
||||||
|
-- This file is part of the coreboot project.
|
||||||
|
--
|
||||||
|
-- Copyright (C) 2018 Tristan Corrick <tristan@corrick.kiwi>
|
||||||
|
--
|
||||||
|
-- This program is free software: you can redistribute it and/or modify
|
||||||
|
-- it under the terms of the GNU General Public License as published by
|
||||||
|
-- the Free Software Foundation, either version 2 of the License, or
|
||||||
|
-- (at your option) any later version.
|
||||||
|
--
|
||||||
|
-- This program is distributed in the hope that it will be useful,
|
||||||
|
-- but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
-- GNU General Public License for more details.
|
||||||
|
--
|
||||||
|
|
||||||
|
with HW.GFX.GMA;
|
||||||
|
with HW.GFX.GMA.Display_Probing;
|
||||||
|
|
||||||
|
use HW.GFX.GMA;
|
||||||
|
use HW.GFX.GMA.Display_Probing;
|
||||||
|
|
||||||
|
private package GMA.Mainboard is
|
||||||
|
|
||||||
|
ports : constant Port_List :=
|
||||||
|
(HDMI1,
|
||||||
|
HDMI3,
|
||||||
|
Analog,
|
||||||
|
others => Disabled);
|
||||||
|
|
||||||
|
end GMA.Mainboard;
|
||||||
|
|
@ -0,0 +1,168 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the coreboot project.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2018 Tristan Corrick <tristan@corrick.kiwi>
|
||||||
|
*
|
||||||
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation, either version 2 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef ASROCK_H81M_HDS_GPIO_H
|
||||||
|
#define ASROCK_H81M_HDS_GPIO_H
|
||||||
|
|
||||||
|
#include <southbridge/intel/common/gpio.h>
|
||||||
|
|
||||||
|
static const struct pch_gpio_set1 pch_gpio_set1_mode = {
|
||||||
|
.gpio0 = GPIO_MODE_GPIO,
|
||||||
|
.gpio1 = GPIO_MODE_GPIO,
|
||||||
|
.gpio6 = GPIO_MODE_GPIO,
|
||||||
|
.gpio7 = GPIO_MODE_GPIO,
|
||||||
|
.gpio12 = GPIO_MODE_GPIO,
|
||||||
|
.gpio13 = GPIO_MODE_GPIO,
|
||||||
|
.gpio14 = GPIO_MODE_GPIO,
|
||||||
|
.gpio15 = GPIO_MODE_GPIO,
|
||||||
|
.gpio16 = GPIO_MODE_GPIO,
|
||||||
|
.gpio17 = GPIO_MODE_GPIO,
|
||||||
|
.gpio24 = GPIO_MODE_GPIO,
|
||||||
|
.gpio27 = GPIO_MODE_GPIO,
|
||||||
|
.gpio28 = GPIO_MODE_GPIO,
|
||||||
|
.gpio31 = GPIO_MODE_GPIO,
|
||||||
|
};
|
||||||
|
|
||||||
|
static const struct pch_gpio_set1 pch_gpio_set1_direction = {
|
||||||
|
.gpio0 = GPIO_DIR_INPUT,
|
||||||
|
.gpio1 = GPIO_DIR_INPUT,
|
||||||
|
.gpio6 = GPIO_DIR_INPUT,
|
||||||
|
.gpio7 = GPIO_DIR_INPUT,
|
||||||
|
.gpio12 = GPIO_DIR_OUTPUT,
|
||||||
|
.gpio13 = GPIO_DIR_INPUT,
|
||||||
|
.gpio14 = GPIO_DIR_OUTPUT,
|
||||||
|
.gpio15 = GPIO_DIR_OUTPUT,
|
||||||
|
.gpio16 = GPIO_DIR_INPUT,
|
||||||
|
.gpio17 = GPIO_DIR_INPUT,
|
||||||
|
.gpio24 = GPIO_DIR_OUTPUT,
|
||||||
|
.gpio27 = GPIO_DIR_INPUT,
|
||||||
|
.gpio28 = GPIO_DIR_OUTPUT,
|
||||||
|
.gpio31 = GPIO_DIR_INPUT,
|
||||||
|
};
|
||||||
|
|
||||||
|
static const struct pch_gpio_set1 pch_gpio_set1_level = {
|
||||||
|
.gpio12 = GPIO_LEVEL_HIGH,
|
||||||
|
.gpio14 = GPIO_LEVEL_LOW,
|
||||||
|
.gpio15 = GPIO_LEVEL_LOW,
|
||||||
|
.gpio24 = GPIO_LEVEL_LOW,
|
||||||
|
.gpio28 = GPIO_LEVEL_LOW,
|
||||||
|
};
|
||||||
|
|
||||||
|
static const struct pch_gpio_set1 pch_gpio_set1_reset = {
|
||||||
|
.gpio8 = GPIO_RESET_RSMRST,
|
||||||
|
};
|
||||||
|
|
||||||
|
static const struct pch_gpio_set1 pch_gpio_set1_invert = {
|
||||||
|
.gpio13 = GPIO_INVERT,
|
||||||
|
};
|
||||||
|
|
||||||
|
static const struct pch_gpio_set1 pch_gpio_set1_blink = {
|
||||||
|
};
|
||||||
|
|
||||||
|
static const struct pch_gpio_set2 pch_gpio_set2_mode = {
|
||||||
|
.gpio32 = GPIO_MODE_GPIO,
|
||||||
|
.gpio33 = GPIO_MODE_GPIO,
|
||||||
|
.gpio34 = GPIO_MODE_GPIO,
|
||||||
|
.gpio35 = GPIO_MODE_GPIO,
|
||||||
|
.gpio42 = GPIO_MODE_GPIO,
|
||||||
|
.gpio43 = GPIO_MODE_GPIO,
|
||||||
|
.gpio46 = GPIO_MODE_GPIO,
|
||||||
|
.gpio49 = GPIO_MODE_GPIO,
|
||||||
|
.gpio50 = GPIO_MODE_GPIO,
|
||||||
|
.gpio51 = GPIO_MODE_GPIO,
|
||||||
|
.gpio52 = GPIO_MODE_GPIO,
|
||||||
|
.gpio53 = GPIO_MODE_GPIO,
|
||||||
|
.gpio54 = GPIO_MODE_GPIO,
|
||||||
|
.gpio55 = GPIO_MODE_GPIO,
|
||||||
|
.gpio57 = GPIO_MODE_GPIO,
|
||||||
|
};
|
||||||
|
|
||||||
|
static const struct pch_gpio_set2 pch_gpio_set2_direction = {
|
||||||
|
.gpio32 = GPIO_DIR_OUTPUT,
|
||||||
|
.gpio33 = GPIO_DIR_OUTPUT,
|
||||||
|
.gpio34 = GPIO_DIR_INPUT,
|
||||||
|
.gpio35 = GPIO_DIR_OUTPUT,
|
||||||
|
.gpio42 = GPIO_DIR_OUTPUT,
|
||||||
|
.gpio43 = GPIO_DIR_OUTPUT,
|
||||||
|
.gpio46 = GPIO_DIR_INPUT,
|
||||||
|
.gpio49 = GPIO_DIR_INPUT,
|
||||||
|
.gpio50 = GPIO_DIR_INPUT,
|
||||||
|
.gpio51 = GPIO_DIR_OUTPUT,
|
||||||
|
.gpio52 = GPIO_DIR_INPUT,
|
||||||
|
.gpio53 = GPIO_DIR_OUTPUT,
|
||||||
|
.gpio54 = GPIO_DIR_INPUT,
|
||||||
|
.gpio55 = GPIO_DIR_OUTPUT,
|
||||||
|
.gpio57 = GPIO_DIR_INPUT,
|
||||||
|
};
|
||||||
|
|
||||||
|
static const struct pch_gpio_set2 pch_gpio_set2_level = {
|
||||||
|
.gpio32 = GPIO_LEVEL_HIGH,
|
||||||
|
.gpio33 = GPIO_LEVEL_HIGH,
|
||||||
|
.gpio35 = GPIO_LEVEL_LOW,
|
||||||
|
.gpio42 = GPIO_LEVEL_LOW,
|
||||||
|
.gpio43 = GPIO_LEVEL_LOW,
|
||||||
|
.gpio51 = GPIO_LEVEL_HIGH,
|
||||||
|
.gpio53 = GPIO_LEVEL_HIGH,
|
||||||
|
.gpio55 = GPIO_LEVEL_HIGH,
|
||||||
|
};
|
||||||
|
|
||||||
|
static const struct pch_gpio_set2 pch_gpio_set2_reset = {
|
||||||
|
};
|
||||||
|
|
||||||
|
static const struct pch_gpio_set3 pch_gpio_set3_mode = {
|
||||||
|
.gpio68 = GPIO_MODE_GPIO,
|
||||||
|
.gpio69 = GPIO_MODE_GPIO,
|
||||||
|
.gpio72 = GPIO_MODE_GPIO,
|
||||||
|
.gpio73 = GPIO_MODE_GPIO,
|
||||||
|
};
|
||||||
|
|
||||||
|
static const struct pch_gpio_set3 pch_gpio_set3_direction = {
|
||||||
|
.gpio68 = GPIO_DIR_INPUT,
|
||||||
|
.gpio69 = GPIO_DIR_INPUT,
|
||||||
|
.gpio72 = GPIO_DIR_INPUT,
|
||||||
|
.gpio73 = GPIO_DIR_INPUT,
|
||||||
|
};
|
||||||
|
|
||||||
|
static const struct pch_gpio_set3 pch_gpio_set3_level = {
|
||||||
|
};
|
||||||
|
|
||||||
|
static const struct pch_gpio_set3 pch_gpio_set3_reset = {
|
||||||
|
};
|
||||||
|
|
||||||
|
const struct pch_gpio_map mainboard_gpio_map = {
|
||||||
|
.set1 = {
|
||||||
|
.mode = &pch_gpio_set1_mode,
|
||||||
|
.direction = &pch_gpio_set1_direction,
|
||||||
|
.level = &pch_gpio_set1_level,
|
||||||
|
.blink = &pch_gpio_set1_blink,
|
||||||
|
.invert = &pch_gpio_set1_invert,
|
||||||
|
.reset = &pch_gpio_set1_reset,
|
||||||
|
},
|
||||||
|
.set2 = {
|
||||||
|
.mode = &pch_gpio_set2_mode,
|
||||||
|
.direction = &pch_gpio_set2_direction,
|
||||||
|
.level = &pch_gpio_set2_level,
|
||||||
|
.reset = &pch_gpio_set2_reset,
|
||||||
|
},
|
||||||
|
.set3 = {
|
||||||
|
.mode = &pch_gpio_set3_mode,
|
||||||
|
.direction = &pch_gpio_set3_direction,
|
||||||
|
.level = &pch_gpio_set3_level,
|
||||||
|
.reset = &pch_gpio_set3_reset,
|
||||||
|
},
|
||||||
|
};
|
||||||
|
|
||||||
|
#endif /* ASROCK_H81M_HDS_GPIO_H */
|
||||||
|
|
@ -0,0 +1,39 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the coreboot project.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2018 Tristan Corrick <tristan@corrick.kiwi>
|
||||||
|
*
|
||||||
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation, either version 2 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <stdint.h>
|
||||||
|
#include <device/azalia_device.h>
|
||||||
|
|
||||||
|
const u32 cim_verb_data[] = {
|
||||||
|
0x10ec0662, /* Realtek ALC662 rev1 */
|
||||||
|
0x18497662, /* Subsystem ID */
|
||||||
|
11, /* Number of entries */
|
||||||
|
AZALIA_SUBVENDOR(1, 0x18497662),
|
||||||
|
AZALIA_PIN_CFG(1, 0x14, 0x01014010),
|
||||||
|
AZALIA_PIN_CFG(1, 0x15, 0x40000000),
|
||||||
|
AZALIA_PIN_CFG(1, 0x16, 0x411111f0),
|
||||||
|
AZALIA_PIN_CFG(1, 0x18, 0x01a19040),
|
||||||
|
AZALIA_PIN_CFG(1, 0x19, 0x02a19050),
|
||||||
|
AZALIA_PIN_CFG(1, 0x1a, 0x0181304f),
|
||||||
|
AZALIA_PIN_CFG(1, 0x1b, 0x02214020),
|
||||||
|
AZALIA_PIN_CFG(1, 0x1c, 0x411111f0),
|
||||||
|
AZALIA_PIN_CFG(1, 0x1d, 0x40a4c601),
|
||||||
|
AZALIA_PIN_CFG(1, 0x1e, 0x411111f0),
|
||||||
|
};
|
||||||
|
|
||||||
|
const u32 pc_beep_verbs[] = {};
|
||||||
|
|
||||||
|
AZALIA_ARRAY_SIZES;
|
||||||
|
|
@ -0,0 +1,29 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the coreboot project.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2018 Tristan Corrick <tristan@corrick.kiwi>
|
||||||
|
*
|
||||||
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation, either version 2 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <device/device.h>
|
||||||
|
#include <drivers/intel/gma/int15.h>
|
||||||
|
|
||||||
|
static void mainboard_enable(struct device *dev)
|
||||||
|
{
|
||||||
|
install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_NONE,
|
||||||
|
GMA_INT15_PANEL_FIT_DEFAULT,
|
||||||
|
GMA_INT15_BOOT_DISPLAY_DEFAULT, 0);
|
||||||
|
}
|
||||||
|
|
||||||
|
struct chip_operations mainboard_ops = {
|
||||||
|
.enable_dev = mainboard_enable,
|
||||||
|
};
|
||||||
|
|
@ -0,0 +1,131 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the coreboot project.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2007-2010 coresystems GmbH
|
||||||
|
* Copyright (C) 2012 Google Inc.
|
||||||
|
* Copyright (C) 2018 Tristan Corrick <tristan@corrick.kiwi>
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation; version 2 of the License.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <stdint.h>
|
||||||
|
#include <cpu/intel/romstage.h>
|
||||||
|
#include <cpu/intel/haswell/haswell.h>
|
||||||
|
#include <northbridge/intel/haswell/haswell.h>
|
||||||
|
#include <northbridge/intel/haswell/pei_data.h>
|
||||||
|
#include <southbridge/intel/lynxpoint/pch.h>
|
||||||
|
#include <superio/nuvoton/common/nuvoton.h>
|
||||||
|
#include <superio/nuvoton/nct6776/nct6776.h>
|
||||||
|
#include "gpio.h"
|
||||||
|
|
||||||
|
static const struct rcba_config_instruction rcba_config[] = {
|
||||||
|
RCBA_SET_REG_16(D31IR, DIR_ROUTE(PIRQA, PIRQD, PIRQC, PIRQA)),
|
||||||
|
RCBA_SET_REG_16(D29IR, DIR_ROUTE(PIRQH, PIRQD, PIRQA, PIRQC)),
|
||||||
|
RCBA_SET_REG_16(D28IR, DIR_ROUTE(PIRQA, PIRQB, PIRQC, PIRQD)),
|
||||||
|
RCBA_SET_REG_16(D27IR, DIR_ROUTE(PIRQG, PIRQB, PIRQC, PIRQD)),
|
||||||
|
RCBA_SET_REG_16(D26IR, DIR_ROUTE(PIRQA, PIRQF, PIRQC, PIRQD)),
|
||||||
|
RCBA_SET_REG_16(D25IR, DIR_ROUTE(PIRQE, PIRQF, PIRQG, PIRQH)),
|
||||||
|
RCBA_SET_REG_16(D22IR, DIR_ROUTE(PIRQA, PIRQD, PIRQC, PIRQB)),
|
||||||
|
RCBA_SET_REG_16(D20IR, DIR_ROUTE(PIRQA, PIRQB, PIRQC, PIRQD)),
|
||||||
|
|
||||||
|
RCBA_RMW_REG_32(FD, ~0, PCH_DISABLE_ALWAYS),
|
||||||
|
|
||||||
|
RCBA_END_CONFIG,
|
||||||
|
};
|
||||||
|
|
||||||
|
void mainboard_config_superio(void)
|
||||||
|
{
|
||||||
|
const pnp_devfn_t GLOBAL_PSEUDO_DEV = PNP_DEV(0x2e, 0);
|
||||||
|
const pnp_devfn_t SERIAL_DEV = PNP_DEV(0x2e, NCT6776_SP1);
|
||||||
|
const pnp_devfn_t ACPI_DEV = PNP_DEV(0x2e, NCT6776_ACPI);
|
||||||
|
const pnp_devfn_t IR_DEV = PNP_DEV(0x2e, NCT6776_SP2);
|
||||||
|
|
||||||
|
nuvoton_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
|
||||||
|
|
||||||
|
nuvoton_pnp_enter_conf_state(GLOBAL_PSEUDO_DEV);
|
||||||
|
|
||||||
|
/* Select HWM/LED functions instead of floppy functions. */
|
||||||
|
pnp_write_config(GLOBAL_PSEUDO_DEV, 0x1c, 0x03);
|
||||||
|
pnp_write_config(GLOBAL_PSEUDO_DEV, 0x24, 0x24);
|
||||||
|
|
||||||
|
/* Power RAM in S3 and let the PCH handle power failure actions. */
|
||||||
|
pnp_set_logical_device(ACPI_DEV);
|
||||||
|
pnp_write_config(ACPI_DEV, 0xe4, 0x70);
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Don't know what's needed here, just set the same as the vendor
|
||||||
|
* firmware.
|
||||||
|
*/
|
||||||
|
pnp_set_logical_device(IR_DEV);
|
||||||
|
pnp_write_config(IR_DEV, 0xf1, 0x5c);
|
||||||
|
|
||||||
|
nuvoton_pnp_exit_conf_state(GLOBAL_PSEUDO_DEV);
|
||||||
|
}
|
||||||
|
|
||||||
|
void mainboard_romstage_entry(unsigned long bist)
|
||||||
|
{
|
||||||
|
struct pei_data pei_data = {
|
||||||
|
.pei_version = PEI_VERSION,
|
||||||
|
.mchbar = (uintptr_t)DEFAULT_MCHBAR,
|
||||||
|
.dmibar = (uintptr_t)DEFAULT_DMIBAR,
|
||||||
|
.epbar = DEFAULT_EPBAR,
|
||||||
|
.pciexbar = DEFAULT_PCIEXBAR,
|
||||||
|
.smbusbar = SMBUS_IO_BASE,
|
||||||
|
.wdbbar = 0x4000000,
|
||||||
|
.wdbsize = 0x1000,
|
||||||
|
.hpet_address = HPET_ADDR,
|
||||||
|
.rcba = (uintptr_t)DEFAULT_RCBA,
|
||||||
|
.pmbase = DEFAULT_PMBASE,
|
||||||
|
.gpiobase = DEFAULT_GPIOBASE,
|
||||||
|
.temp_mmio_base = 0xfed08000,
|
||||||
|
.system_type = 1, /* desktop/server */
|
||||||
|
.tseg_size = CONFIG_SMM_TSEG_SIZE,
|
||||||
|
.spd_addresses = { 0xa0, 0x00, 0xa4, 0x00 },
|
||||||
|
.ec_present = 0,
|
||||||
|
.dimm_channel0_disabled = 2, /* Disable DIMM 1 on channel 0. */
|
||||||
|
.dimm_channel1_disabled = 2, /* Disable DIMM 1 on channel 1. */
|
||||||
|
.max_ddr3_freq = 1600,
|
||||||
|
.usb2_ports = {
|
||||||
|
/* Length, Enable, OCn#, Location */
|
||||||
|
{ 0x0040, 1, 0, USB_PORT_BACK_PANEL },
|
||||||
|
{ 0x0040, 1, 0, USB_PORT_BACK_PANEL },
|
||||||
|
{ 0x0040, 1, 1, USB_PORT_BACK_PANEL },
|
||||||
|
{ 0x0040, 1, 1, USB_PORT_BACK_PANEL },
|
||||||
|
{ 0x0040, 1, 2, USB_PORT_BACK_PANEL },
|
||||||
|
{ 0x0040, 1, 2, USB_PORT_BACK_PANEL },
|
||||||
|
{ 0x0040, 0, USB_OC_PIN_SKIP, USB_PORT_SKIP },
|
||||||
|
{ 0x0040, 0, USB_OC_PIN_SKIP, USB_PORT_SKIP },
|
||||||
|
{ 0x0040, 1, 4, USB_PORT_BACK_PANEL },
|
||||||
|
{ 0x0040, 1, 4, USB_PORT_BACK_PANEL },
|
||||||
|
{ 0x0040, 1, 5, USB_PORT_BACK_PANEL },
|
||||||
|
{ 0x0040, 1, 5, USB_PORT_BACK_PANEL },
|
||||||
|
{ 0x0040, 0, USB_OC_PIN_SKIP, USB_PORT_SKIP },
|
||||||
|
{ 0x0040, 0, USB_OC_PIN_SKIP, USB_PORT_SKIP },
|
||||||
|
},
|
||||||
|
.usb3_ports = {
|
||||||
|
/* Enable, OCn# */
|
||||||
|
{ 1, 0 },
|
||||||
|
{ 1, 0 },
|
||||||
|
{ 0, USB_OC_PIN_SKIP },
|
||||||
|
{ 0, USB_OC_PIN_SKIP },
|
||||||
|
{ 0, USB_OC_PIN_SKIP },
|
||||||
|
{ 0, USB_OC_PIN_SKIP },
|
||||||
|
},
|
||||||
|
};
|
||||||
|
|
||||||
|
struct romstage_params romstage_params = {
|
||||||
|
.pei_data = &pei_data,
|
||||||
|
.gpio_map = &mainboard_gpio_map,
|
||||||
|
.rcba_config = &rcba_config[0],
|
||||||
|
.bist = bist,
|
||||||
|
};
|
||||||
|
|
||||||
|
romstage_common(&romstage_params);
|
||||||
|
}
|
||||||
Loading…
Reference in New Issue