superiotool: Add an alternative dump format

Add new dump format to superiotool that prints each register on a
separate line. This should be more suitable for diff'ing dumps of
multiple superiotool runs.

Change-Id: I226ee82b903bf77e760d3396d02fa50688adb9f2
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/17003
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>

util/superiotool/superiotool.c

@@ -25,7 +25,7 @@
 #endif
 
 /* Command line options. */
-int dump = 0, verbose = 0, extra_dump = 0;
+int dump = 0, verbose = 0, extra_dump = 0, alternate_dump = 0;
 
 /* Global flag which indicates whether a chip was detected at all. */
 int chip_found = 0;
@@ -105,7 +105,7 @@ static void dump_regs(const struct superio_registers reg_table[],
 		      int i, int j, uint16_t port, uint8_t ldn_sel)
 {
 	int k;
-	const int16_t *idx;
+	const int16_t *idx, *def;
 
 	if (reg_table[i].ldn[j].ldn != NOLDN) {
 		printf("LDN 0x%02x", reg_table[i].ldn[j].ldn);
@@ -120,7 +120,31 @@ static void dump_regs(const struct superio_registers reg_table[],
 	}
 
 	idx = reg_table[i].ldn[j].idx;
+	def = reg_table[i].ldn[j].def;
 
+	if (alternate_dump) {
+		int skip_def = 0;
+
+		printf("\nidx   val    def\n");
+
+		for (k = 0; idx[k] != EOT; k++) {
+			printf("0x%02x: 0x%02x", idx[k], regval(port, idx[k]));
+
+			if (skip_def || def[k] == EOT) {
+				skip_def = 1;
+				printf("\n");
+				continue;
+			}
+			if (def[k] == NANA)
+				printf("   (NA)\n");
+			else if (def[k] == RSVD)
+				printf("   (RR)\n");
+			else if (def[k] == MISC)
+				printf("   (MM)\n");
+			else
+				printf("   (0x%02x)\n", def[k]);
+		}
+	} else {
 		printf("\nidx");
 		for (k = 0; idx[k] != EOT; k++) {
 			if (k && !(k % 8))
@@ -136,18 +160,18 @@ static void dump_regs(const struct superio_registers reg_table[],
 		}
 
 		printf("\ndef");
-	idx = reg_table[i].ldn[j].def;
+		for (k = 0; def[k] != EOT; k++) {
-	for (k = 0; idx[k] != EOT; k++) {
 			if (k && !(k % 8))
 				putchar(' ');
-		if (idx[k] == NANA)
+			if (def[k] == NANA)
 				printf(" NA");
-		else if (idx[k] == RSVD)
+			else if (def[k] == RSVD)
 				printf(" RR");
-		else if (idx[k] == MISC)
+			else if (def[k] == MISC)
 				printf(" MM");
 			else
-			printf(" %02x", idx[k]);
+				printf(" %02x", def[k]);
+		}
 	}
 	printf("\n");
 }
@@ -270,6 +294,7 @@ int main(int argc, char *argv[])
 	static const struct option long_options[] = {
 		{"dump",		no_argument, NULL, 'd'},
 		{"extra-dump",		no_argument, NULL, 'e'},
+		{"alternate-dump",	no_argument, NULL, 'a'},
 		{"list-supported",	no_argument, NULL, 'l'},
 		{"verbose",		no_argument, NULL, 'V'},
 		{"version",		no_argument, NULL, 'v'},
@@ -277,7 +302,7 @@ int main(int argc, char *argv[])
 		{0, 0, 0, 0}
 	};
 
-	while ((opt = getopt_long(argc, argv, "delVvh",
+	while ((opt = getopt_long(argc, argv, "dealVvh",
 				  long_options, &option_index)) != EOF) {
 		switch (opt) {
 		case 'd':
@@ -286,6 +311,9 @@ int main(int argc, char *argv[])
 		case 'e':
 			extra_dump = 1;
 			break;
+		case 'a':
+			alternate_dump = 1;
+			break;
 		case 'l':
 			print_list_of_supported_chips();
 			exit(0);

util/superiotool/superiotool.h

@@ -108,9 +108,10 @@ static __inline__ uint32_t inl(uint16_t port)
 }
 #endif
 
-#define USAGE "Usage: superiotool [-d] [-e] [-l] [-V] [-v] [-h]\n\n\
+#define USAGE "Usage: superiotool [-d] [-e] [-a] [-l] [-V] [-v] [-h]\n\n\
   -d | --dump            Dump Super I/O register contents\n\
   -e | --extra-dump      Dump secondary registers too (e.g. EC registers)\n\
+  -a | --alternate-dump  Use alternative dump format, more suitable for diff\n\
   -l | --list-supported  Show the list of supported Super I/O chips\n\
   -V | --verbose         Verbose mode\n\
   -v | --version         Show the superiotool version\n\