mb/google/dedede/var/magolor: Add device settings
Add the configuration in device tree: 1. Add HDA,speaker codec and speaker amp setting 2. Add Elan and Goodix touchscreen setting 3. Add user facing camera usb setting 4 Add Synaptics and Elan Touchpad setting 5. Add WiFi configuration BUG=None BRANCH=None TEST=build magolor firmware Change-Id: Ifc562b4a05c8955d2aec105f2f429f926ad1e702 Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44633 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This commit is contained in:
parent
97b4224943
commit
3818d03fa2
|
@ -1,5 +1,8 @@
|
|||
chip soc/intel/jasperlake
|
||||
|
||||
# USB Port Configuration
|
||||
register "usb2_ports[5]" = "USB2_PORT_MID(OC_SKIP)" # Camera
|
||||
|
||||
# Intel Common SoC Config
|
||||
#+-------------------+---------------------------+
|
||||
#| Field | Value |
|
||||
|
@ -9,10 +12,11 @@ chip soc/intel/jasperlake
|
|||
#| | for TPM communication |
|
||||
#| | before memory is up |
|
||||
#| I2C0 | Trackpad |
|
||||
#| I2C1 | Digitizer |
|
||||
#| I2C1 | TBD |
|
||||
#| I2C2 | Touchscreen |
|
||||
#| I2C3 | Camera |
|
||||
#| I2C4 | Audio |
|
||||
#| I2C5 | TBD |
|
||||
#+-------------------+---------------------------+
|
||||
register "common_soc_config" = "{
|
||||
.gspi[0] = {
|
||||
|
@ -37,6 +41,101 @@ chip soc/intel/jasperlake
|
|||
}"
|
||||
|
||||
device domain 0 on
|
||||
device pci 15.0 on end
|
||||
device pci 14.0 on
|
||||
chip drivers/usb/acpi
|
||||
device usb 0.0 on
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""Camera""
|
||||
register "type" = "UPC_TYPE_INTERNAL"
|
||||
device usb 2.5 on end
|
||||
end
|
||||
end
|
||||
end
|
||||
end # USB xHCI
|
||||
device pci 15.0 on
|
||||
chip drivers/i2c/hid
|
||||
register "generic.hid" = ""PNP0C50""
|
||||
register "generic.desc" = ""Synaptics Touchpad""
|
||||
register "generic.irq" = "ACPI_IRQ_WAKE_EDGE_LOW(GPP_B3_IRQ)"
|
||||
register "generic.wake" = "GPE0_DW0_03"
|
||||
register "generic.probed" = "1"
|
||||
register "hid_desc_reg_offset" = "0x20"
|
||||
device i2c 0x2c on end
|
||||
end
|
||||
chip drivers/i2c/generic
|
||||
register "hid" = ""ELAN0000""
|
||||
register "desc" = ""ELAN Touchpad""
|
||||
register "irq" = "ACPI_IRQ_WAKE_EDGE_LOW(GPP_B3_IRQ)"
|
||||
register "wake" = "GPE0_DW0_03"
|
||||
register "probed" = "1"
|
||||
device i2c 15 on end
|
||||
end
|
||||
end # I2C 0
|
||||
device pci 15.2 on
|
||||
chip drivers/i2c/hid
|
||||
register "generic.hid" = ""GDIX0000""
|
||||
register "generic.desc" = ""Goodix Touchscreen""
|
||||
register "generic.irq" = "ACPI_IRQ_EDGE_LOW(GPP_D4_IRQ)"
|
||||
register "generic.probed" = "1"
|
||||
register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D5)"
|
||||
register "generic.reset_delay_ms" = "120"
|
||||
register "generic.reset_off_delay_ms" = "2"
|
||||
register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D6)"
|
||||
register "generic.enable_delay_ms" = "12"
|
||||
register "generic.has_power_resource" = "1"
|
||||
register "hid_desc_reg_offset" = "0x01"
|
||||
device i2c 0x5d on end
|
||||
end
|
||||
chip drivers/i2c/hid
|
||||
register "generic.hid" = ""ELAN9050""
|
||||
register "generic.desc" = ""ELAN Touchscreen""
|
||||
register "generic.irq" = "ACPI_IRQ_EDGE_LOW(GPP_D4_IRQ)"
|
||||
register "generic.probed" = "1"
|
||||
register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D5)"
|
||||
register "generic.reset_delay_ms" = "20"
|
||||
register "generic.reset_off_delay_ms" = "2"
|
||||
register "generic.stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_A11)"
|
||||
register "generic.stop_delay_ms" = "280"
|
||||
register "generic.stop_off_delay_ms" = "2"
|
||||
register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D6)"
|
||||
register "generic.enable_delay_ms" = "1"
|
||||
register "generic.has_power_resource" = "1"
|
||||
register "hid_desc_reg_offset" = "0x01"
|
||||
device i2c 10 on end
|
||||
end
|
||||
end # I2C 2
|
||||
device pci 19.0 on
|
||||
chip drivers/i2c/generic
|
||||
register "hid" = ""10EC5682""
|
||||
register "name" = ""RT58""
|
||||
register "desc" = ""Realtek RT5682""
|
||||
register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_D16)"
|
||||
register "property_count" = "1"
|
||||
register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER"
|
||||
register "property_list[0].name" = ""realtek,jd-src""
|
||||
register "property_list[0].integer" = "1"
|
||||
device i2c 1a on end
|
||||
end
|
||||
chip drivers/i2c/generic
|
||||
register "hid" = ""10EC1015""
|
||||
register "desc" = ""Realtek SPK AMP L""
|
||||
register "uid" = "0"
|
||||
device i2c 28 on end
|
||||
end
|
||||
chip drivers/i2c/generic
|
||||
register "hid" = ""10EC1015""
|
||||
register "desc" = ""Realtek SPK AMP R""
|
||||
register "uid" = "1"
|
||||
device i2c 29 on end
|
||||
end
|
||||
end
|
||||
device pci 1f.3 on end # Intel HDA
|
||||
device pci 1c.7 on
|
||||
chip drivers/wifi/generic
|
||||
register "wake" = "GPE0_DW2_03"
|
||||
register "maxsleep" = "3"
|
||||
device pci 00.0 on end
|
||||
end
|
||||
end # PCI Express Root Port 8 - WLAN
|
||||
end
|
||||
end
|
||||
|
|
Loading…
Reference in New Issue