nodeid

git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1849 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

src/mainboard/tyan/s2850/auto.c

@@ -137,23 +137,18 @@ static void main(unsigned long bist)
 	};
 
 	int needs_reset;
+	unsigned nodeid;
         if (bist == 0) {
                 /* Skip this if there was a built in self test failure */
                 amd_early_mtrr_init();
                 enable_lapic();
                 init_timer();
         
-                if (cpu_init_detected()) {
+		nodeid = lapicid() & 0xf;
-#if 1           
+                if (cpu_init_detected(nodeid)) {
                         asm volatile ("jmp __cpu_reset");
-#else                   
-                /* cpu reset also reset the memtroller ????
-                        need soft_reset to reset all except keep HT link freq and width */
-                        distinguish_cpu_resets();
-                        soft2_reset();
-#endif          
                 }
-                distinguish_cpu_resets();
+                distinguish_cpu_resets(nodeid);
                 if (!boot_cpu()) {
                         stop_this_cpu();
                 }       

src/mainboard/tyan/s2850/failover.c

@@ -13,11 +13,14 @@
 
 static unsigned long main(unsigned long bist)
 {
+	unsigned nodeid;
 	/* Make cerain my local apic is useable */
 	enable_lapic();
 	
+	nodeid = lapicid() & 0xf;
+
 	/* Is this a cpu only reset? */
-	if (cpu_init_detected()) {
+	if (cpu_init_detected(nodeid)) {
 		if (last_boot_normal()) {
 			goto normal_image;
 		} else {

src/mainboard/tyan/s2875/auto.c

@@ -165,6 +165,7 @@ static void main(unsigned long bist)
 	};
 
         int needs_reset;
+	unsigned nodeid;
 
         if (bist == 0) {
                 /* Skip this if there was a built in self test failure */
@@ -172,17 +173,12 @@ static void main(unsigned long bist)
                 enable_lapic();
                 init_timer();
 	
-                if (cpu_init_detected()) {
+		nodeid = lapicid() & 0xf;
-#if 1
+
+                if (cpu_init_detected(nodeid)) {
                         asm volatile ("jmp __cpu_reset");
-#else                   
-                /* cpu reset also reset the memtroller ????
-                        need soft_reset to reset all except keep HT link freq and width */
-                        distinguish_cpu_resets();
-                        soft2_reset();
-#endif          
                 }
-                distinguish_cpu_resets();
+                distinguish_cpu_resets(nodeid);
                 if (!boot_cpu()) {
                         stop_this_cpu();
                 }       

src/mainboard/tyan/s2875/failover.c

@@ -13,11 +13,14 @@
 
 static unsigned long main(unsigned long bist)
 {
+	unsigned nodeid;
 	/* Make cerain my local apic is useable */
 	enable_lapic();
 	
+	nodeid = lapicid() & 0xf;
+
 	/* Is this a cpu only reset? */
-	if (cpu_init_detected()) {
+	if (cpu_init_detected(nodeid)) {
 		if (last_boot_normal()) {
 			goto normal_image;
 		} else {

src/mainboard/tyan/s2880/auto.c

@@ -160,6 +160,7 @@ static void main(unsigned long bist)
 #endif
 	};
         int needs_reset;
+	unsigned nodeid;
 
         if (bist == 0) {
                 /* Skip this if there was a built in self test failure */
@@ -167,17 +168,12 @@ static void main(unsigned long bist)
                 enable_lapic();
                 init_timer();
 		
-                if (cpu_init_detected()) {
+		nodeid = lapicid() & 0xf;
-#if 1
+
+                if (cpu_init_detected(nodeid)) {
                         asm volatile ("jmp __cpu_reset");
-#else                   
-                /* cpu reset also reset the memtroller ????
-                        need soft_reset to reset all except keep HT link freq and width */
-                        distinguish_cpu_resets();
-                        soft2_reset();
-#endif          
                 }
-                distinguish_cpu_resets();
+                distinguish_cpu_resets(nodeid);
                 if (!boot_cpu()) {
                         stop_this_cpu();
                 }       

src/mainboard/tyan/s2880/failover.c

@@ -13,11 +13,15 @@
 
 static unsigned long main(unsigned long bist)
 {
+	unsigned nodeid;
+
 	/* Make cerain my local apic is useable */
 	enable_lapic();
 	
+	nodeid = lapicid() & 0xf;
+
 	/* Is this a cpu only reset? */
-	if (cpu_init_detected()) {
+	if (cpu_init_detected(nodeid)) {
 		if (last_boot_normal()) {
 			goto normal_image;
 		} else {

src/mainboard/tyan/s2881/auto.c

@@ -161,23 +161,20 @@ static void main(unsigned long bist)
 #endif
 	};
         int needs_reset;
+	unsigned nodeid;
+
         if (bist == 0) {
                 /* Skip this if there was a built in self test failure */
                 amd_early_mtrr_init();
                 enable_lapic();
                 init_timer();
 
-                if (cpu_init_detected()) {
+		nodeid = lapicid() & 0xf;
-#if 1
+
+                if (cpu_init_detected(nodeid)) {
                         asm volatile ("jmp __cpu_reset");
-#else                   
-                /* cpu reset also reset the memtroller ????
-                        need soft_reset to reset all except keep HT link freq and width */
-                        distinguish_cpu_resets();
-                        soft2_reset();
-#endif          
                 }
-                distinguish_cpu_resets();
+                distinguish_cpu_resets(nodeid);
                 if (!boot_cpu()) {
                         stop_this_cpu();
                 }       

src/mainboard/tyan/s2881/failover.c

@@ -13,11 +13,14 @@
 
 static unsigned long main(unsigned long bist)
 {
+	unsigned nodeid;
 	/* Make cerain my local apic is useable */
 	enable_lapic();
 
+	nodeid = lapicid() & 0xf;
+
 	/* Is this a cpu only reset? */
-	if (cpu_init_detected()) {
+	if (cpu_init_detected(nodeid)) {
 		if (last_boot_normal()) {
 			goto normal_image;
 		} else {

src/mainboard/tyan/s2882/auto.c

@@ -167,6 +167,7 @@ static void main(unsigned long bist)
 	};
         
 	int needs_reset;
+	unsigned nodeid;
 
         if (bist == 0) {
                 /* Skip this if there was a built in self test failure */
@@ -174,17 +175,12 @@ static void main(unsigned long bist)
                 enable_lapic();
                 init_timer();
 
-                if (cpu_init_detected()) {
+		nodeid = lapicid() & 0xf;
-#if 1
+
+                if (cpu_init_detected(nodeid)) {
                         asm volatile ("jmp __cpu_reset");
-#else 
-                /* cpu reset also reset the memtroller ????
-                        need soft_reset to reset all except keep HT link freq and width */
-                        distinguish_cpu_resets();
-                        soft2_reset();
-#endif
                 }
-                distinguish_cpu_resets();
+                distinguish_cpu_resets(nodeid);
                 if (!boot_cpu()) {
                         stop_this_cpu();
                 }

src/mainboard/tyan/s2882/failover.c

@@ -13,11 +13,14 @@
 
 static unsigned long main(unsigned long bist)
 {
-	/* Make cerain my local apic is useable */
+        unsigned nodeid;
-	enable_lapic();
+        /* Make cerain my local apic is useable */
+        enable_lapic();
+
+        nodeid = lapicid() & 0xf;
 
 	/* Is this a cpu only reset? */
-	if (cpu_init_detected()) {
+	if (cpu_init_detected(nodeid)) {
 		if (last_boot_normal()) {
 			goto normal_image;
 		} else {

src/mainboard/tyan/s2885/auto.c

@@ -178,30 +178,20 @@ static void main(unsigned long bist)
         };
 
         int needs_reset;
+	unsigned nodeid;
+
 	if (bist == 0) {
 		/* Skip this if there was a built in self test failure */
 		amd_early_mtrr_init();
 	        enable_lapic();
         	init_timer();
 
-	        if (cpu_init_detected()) {
+		nodeid = lapicid() & 0xf;
-#if 1
+	
+	        if (cpu_init_detected(nodeid)) {
         	        asm volatile ("jmp __cpu_reset");
-#else           
-                /* cpu reset also reset the memtroller ????
-                        need soft_reset to reset all except keep HT link freq and width */
-		/* So we don't need to 
-			1. jmp to __cpu_reset
-			2. jmp to __main to copy ROM to ram (It costs some time) 
-			3. call hardwaremain(), it will according to boot_complete to issue hard_reset in southbridge. 
-				(Actually it is soft2_reset(); --- without call hard_reset, the memory is corrupted.
-		  We will call soft2_reset directly to spare time in 1 and 2 and 3.2
-		*/
-                	distinguish_cpu_resets();
-                	soft2_reset();
-#endif  
         	}
-        	distinguish_cpu_resets();
+        	distinguish_cpu_resets(nodeid);
         	if (!boot_cpu()) {
                 	stop_this_cpu();
         	}

src/mainboard/tyan/s2885/failover.c

@@ -13,11 +13,14 @@
 
 static unsigned long main(unsigned long bist)
 {
-	/* Make cerain my local apic is useable */
+        unsigned nodeid;
-	enable_lapic();
+        /* Make cerain my local apic is useable */
+        enable_lapic();
+
+        nodeid = lapicid() & 0xf;
 
 	/* Is this a cpu only reset? */
-	if (cpu_init_detected()) {
+	if (cpu_init_detected(nodeid)) {
 		if (last_boot_normal()) {
 			goto normal_image;
 		} else {

src/mainboard/tyan/s4880/auto.c

@@ -228,6 +228,7 @@ static void main(unsigned long bist)
 	};
 	int i;
         int needs_reset;
+	unsigned nodeid;
 
         if (bist == 0) {
                 /* Skip this if there was a built in self test failure */
@@ -235,17 +236,12 @@ static void main(unsigned long bist)
                 enable_lapic();
                 init_timer();
 
-                if (cpu_init_detected()) {
+		nodeid = lapicid() & 0xf;
-#if 1
+
+                if (cpu_init_detected(nodeid)) {
                         asm volatile ("jmp __cpu_reset");
-#else                   
-                /* cpu reset also reset the memtroller ????
-                        need soft_reset to reset all except keep HT link freq and width */
-                        distinguish_cpu_resets();
-                        soft2_reset();
-#endif          
                 }
-                distinguish_cpu_resets();
+                distinguish_cpu_resets(nodeid);
                 if (!boot_cpu()) {
                         stop_this_cpu();
                 }       

src/mainboard/tyan/s4880/failover.c

@@ -13,11 +13,14 @@
 
 static unsigned long main(unsigned long bist)
 {
-	/* Make cerain my local apic is useable */
+        unsigned nodeid;
-	enable_lapic();
+        /* Make cerain my local apic is useable */
+        enable_lapic();
+
+        nodeid = lapicid() & 0xf;
 
 	/* Is this a cpu only reset? */
-	if (cpu_init_detected()) {
+	if (cpu_init_detected(nodeid)) {
 		if (last_boot_normal()) {
 			goto normal_image;
 		} else {