mb/google/rex/var/screebo: Add BT devicetree config

Enabling BT for screebo project

BUG=b:278169273
TEST=Check whether BT can connect to Bluetooth device

Signed-off-by: qinwentao <qinwentao@huaqin.corp-partner.google.com>
Change-Id: I0ecd62abfbe751e1036948b1490844e7e63d7f0d
Signed-off-by: qinwentao <qinwentao@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75352
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
This commit is contained in:
qinwentao 2023-05-19 15:25:01 +08:00 committed by Felix Held
parent 948c0b7947
commit 3afa593103
1 changed files with 7 additions and 0 deletions

View File

@ -4,6 +4,7 @@ chip soc/intel/meteorlake
register "usb2_ports[1]" = "USB2_PORT_TYPE_C(OC0)" # USB2_C0 register "usb2_ports[1]" = "USB2_PORT_TYPE_C(OC0)" # USB2_C0
register "usb2_ports[2]" = "USB2_PORT_MID(OC2)" # Type-A Port A1 register "usb2_ports[2]" = "USB2_PORT_MID(OC2)" # Type-A Port A1
register "usb2_ports[8]" = "USB2_PORT_MID(OC3)" # Type-A Port A0 register "usb2_ports[8]" = "USB2_PORT_MID(OC3)" # Type-A Port A0
register "usb2_ports[9]" = "USB2_PORT_MID(OC_SKIP)" # M.2 Bluetooth
register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC3)" # USB3/2 Type A port A0 register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC3)" # USB3/2 Type A port A0
register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC2)" # USB3/2 Type A port A1 register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC2)" # USB3/2 Type A port A1
@ -287,6 +288,12 @@ chip soc/intel/meteorlake
register "custom_pld" = "ACPI_PLD_TYPE_A(RIGHT, CENTER, ACPI_PLD_GROUP(3, 1))" register "custom_pld" = "ACPI_PLD_TYPE_A(RIGHT, CENTER, ACPI_PLD_GROUP(3, 1))"
device ref usb2_port9 on end device ref usb2_port9 on end
end end
chip drivers/usb/acpi
register "desc" = ""USB2 Bluetooth""
register "type" = "UPC_TYPE_INTERNAL"
register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_B01)"
device ref usb2_port10 on end
end
chip drivers/usb/acpi chip drivers/usb/acpi
register "desc" = ""USB3 Type-A Port A0 (MLB)"" register "desc" = ""USB3 Type-A Port A0 (MLB)""
register "type" = "UPC_TYPE_USB3_A" register "type" = "UPC_TYPE_USB3_A"