GNUBoot
/
coreboot-kgpe-d16
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

drivers/pc80: Rework normal / fallback selector code 

Per IRC and Gerrit discussion, the normal / fallback
selector code is a rather weak spot in coreboot, and
did not function correctly for certain use cases.

Rework the selector to more clearly indicate proper
operation, and also remove dead code.  Also tentatively
abandon use of RTC bit 385; a follow-up patch will
remove said bit from all affected mainboards.

The correct operation of the fallback code selector
approximates that of a power line recloser, with
a user option to attempt normal boot that can be
cleared by firmware, but never set by firmware.
Additionally, if cleared by user, the fallback
path should always be used on the next reboot.

Change-Id: I753ae9f0710c524875a85354ac2547df0c305569
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12289
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This commit is contained in:
Timothy Pearson 2015-11-01 02:13:17 -06:00 committed by Martin Roth
parent 2a4f58ac12
commit 3bfd7cc61e
4 changed files with 50 additions and 38 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
src/Kconfig
View File

@ -268,9 +268,12 @@ config BOOTBLOCK_SOURCE
config SKIP_MAX_REBOOT_CNT_CLEAR
bool "Do not clear reboot count after successful boot"
default n
depends on BOOTBLOCK_NORMAL
help
Do not clear the reboot count immediately after successful boot.
Set to allow the payload to control normal/fallback image recovery.
Note that it is the responsibility of the payload to reset the
normal boot bit to 1 after each successsful boot.
config UPDATE_IMAGE
bool "Update existing coreboot.rom image"

58
src/drivers/pc80/mc146818rtc_early.c
View File

@ -41,12 +41,24 @@ static int cmos_chksum_valid(void)
#endif
}
static inline __attribute__((unused)) int last_boot_normal(void)
static inline __attribute__((unused)) int boot_count(uint8_t rtc_byte)
{
unsigned char byte;
byte = cmos_read(RTC_BOOT_BYTE);
return (byte & (1 << 1));
return rtc_byte >> 4;
}
static inline __attribute__((unused)) uint8_t increment_boot_count(uint8_t rtc_byte)
{
return rtc_byte + (1 << 4);
}
static inline __attribute__((unused)) uint8_t boot_set_fallback(uint8_t rtc_byte)
{
return rtc_byte & ~RTC_BOOT_NORMAL;
}
static inline __attribute__((unused)) int boot_use_normal(uint8_t rtc_byte)
{
return rtc_byte & RTC_BOOT_NORMAL;
}
static inline __attribute__((unused)) int do_normal_boot(void)
@ -54,42 +66,32 @@ static inline __attribute__((unused)) int do_normal_boot(void)
unsigned char byte;
if (cmos_error() || !cmos_chksum_valid()) {
/* There are no impossible values, no checksums so just
* trust whatever value we have in the the cmos,
* but clear the fallback bit.
/* Invalid CMOS checksum detected!
* Force fallback boot...
*/
byte = cmos_read(RTC_BOOT_BYTE);
byte &= 0x0c;
byte |= CONFIG_MAX_REBOOT_CNT << 4;
byte &= boot_set_fallback(byte) & 0x0f;
byte |= 0xf << 4;
cmos_write(byte, RTC_BOOT_BYTE);
}
/* The RTC_BOOT_BYTE is now o.k. see where to go. */
byte = cmos_read(RTC_BOOT_BYTE);
if (!IS_ENABLED(CONFIG_SKIP_MAX_REBOOT_CNT_CLEAR))
/* Are we in normal mode? */
if (byte & 1)
byte &= 0x0f; /* yes, clear the boot count */
/* Properly set the last boot flag */
byte &= 0xfc;
if ((byte >> 4) < CONFIG_MAX_REBOOT_CNT) {
byte |= (1<<1);
}
/* Are we already at the max count? */
if ((byte >> 4) < CONFIG_MAX_REBOOT_CNT) {
byte += 1 << 4; /* No, add 1 to the count */
}
else {
byte &= 0xfc; /* Yes, put in fallback mode */
/* Are we attempting to boot normally? */
if (boot_use_normal(byte)) {
/* Are we already at the max count? */
if (boot_count(byte) < CONFIG_MAX_REBOOT_CNT)
byte = increment_boot_count(byte);
else
byte = boot_set_fallback(byte);
}
/* Save the boot byte */
cmos_write(byte, RTC_BOOT_BYTE);
return (byte & (1<<1));
/* Return selected code path for this boot attempt */
return boot_use_normal(byte);
}
unsigned read_option_lowlevel(unsigned start, unsigned size, unsigned def)

2
src/include/pc80/mc146818rtc.h
View File

@ -25,6 +25,8 @@
**********************************************************************/
#define RTC_FREQ_SELECT RTC_REG_A
#define RTC_BOOT_NORMAL 0x1
/* update-in-progress - set to "1" 244 microsecs before RTC goes off the bus,
* reset after update (may take 1.984ms @ 32768Hz RefClock) is complete,
* totaling to a max high interval of 2.228 ms.

25
src/lib/fallback_boot.c
View File

@ -8,23 +8,28 @@
static void set_boot_successful(void)
{
/* Remember I successfully booted by setting
* the initial boot direction
* to the direction that I booted.
*/
unsigned char index, byte;
uint8_t index, byte;
index = inb(RTC_PORT(0)) & 0x80;
index |= RTC_BOOT_BYTE;
outb(index, RTC_PORT(0));
byte = inb(RTC_PORT(1));
byte &= 0xfe;
byte |= (byte & (1 << 1)) >> 1;
/* If we are in normal mode set the boot count to 0 */
if (!IS_ENABLED(CONFIG_SKIP_MAX_REBOOT_CNT_CLEAR))
if(byte & 1)
if (IS_ENABLED(CONFIG_SKIP_MAX_REBOOT_CNT_CLEAR)) {
/* Set the fallback boot bit to allow for recovery if
* the payload fails to boot.
* It is the responsibility of the payload to reset
* the normal boot bit to 1 if desired
*/
byte &= ~RTC_BOOT_NORMAL;
} else {
/* If we are in normal mode set the boot count to 0 */
if (byte & RTC_BOOT_NORMAL)
byte &= 0x0f;
}
outb(byte, RTC_PORT(1));
}
#else