beaglebone: initial Kconfig and Makefiles

Initial structure of Beaglebone port

Change-Id: Ia255ab207f424dcd525990cdc0d74953e012c087
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Signed-off-by: Gabe Black <gabeblack@chromium.org>
Reviewed-on: http://review.coreboot.org/3279
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This commit is contained in:
Gabe Black 2013-05-26 07:15:57 -07:00 committed by Ronald G. Minnich
parent b460a66aa9
commit 3c7e939c3e
22 changed files with 832 additions and 0 deletions

View File

@ -5,6 +5,7 @@ if ARCH_ARMV7
source src/cpu/armltd/Kconfig source src/cpu/armltd/Kconfig
source src/cpu/samsung/Kconfig source src/cpu/samsung/Kconfig
source src/cpu/ti/Kconfig
endif # ARCH_ARM endif # ARCH_ARM

View File

@ -5,6 +5,7 @@ subdirs-y += amd
subdirs-y += armltd subdirs-y += armltd
subdirs-y += intel subdirs-y += intel
subdirs-y += samsung subdirs-y += samsung
subdirs-y += ti
subdirs-y += via subdirs-y += via
subdirs-y += x86 subdirs-y += x86

11
src/cpu/ti/Kconfig Normal file
View File

@ -0,0 +1,11 @@
config CPU_TI_AM335X
depends on ARCH_ARMV7
select HAVE_MONOTONIC_TIMER
select HAVE_UART_SPECIAL
select DEFAULT_EARLY_CONSOLE
bool
default n
if CPU_TI_AM335X
source src/cpu/ti/am335x/Kconfig
endif

1
src/cpu/ti/Makefile.inc Normal file
View File

@ -0,0 +1 @@
subdirs-$(CONFIG_CPU_TI_AM335X) += am335x

79
src/cpu/ti/am335x/Kconfig Normal file
View File

@ -0,0 +1,79 @@
config BOOTBLOCK_CPU_INIT
string
default "cpu/ti/am335x/bootblock.c"
help
CPU/SoC-specific bootblock code. This is useful if the
bootblock must load microcode or copy data from ROM before
searching for the bootblock.
# Example SRAM/iRAM map for Exynos5250 platform:
#
# 0x0202_3400: bootblock, assume up to 32KB in size
# 0x0203_0000: romstage, assume up to 128KB in size.
# 0x0207_8000: stack pointer
# FIXME: find out where romboot places ml0/coreboot
config BOOTBLOCK_BASE
hex
default 0xdeadbeef
#config ROMSTAGE_BASE
# hex
# default 0x02030000
#
# FIXME: this is bullshit.
config ROMSTAGE_SIZE
hex
default 0xa000
# Stack may reside in either IRAM or DRAM. We will define it to live
# at the top of IRAM for now.
#
# Stack grows downward, push operation stores register contents in
# consecutive memory locations ending just below SP
config STACK_TOP
hex
default 0x02078000
config STACK_BOTTOM
hex
default 0x02077000
config STACK_SIZE
hex
default 0x1000
config CBFS_ROM_OFFSET
# Calculated by BL1 + max bootblock size.
hex "offset of CBFS data in ROM"
default 0x0A000
## TODO Change this to some better address not overlapping bootblock when
## cbfstool supports creating header in arbitrary location.
config CBFS_HEADER_ROM_OFFSET
hex "offset of master CBFS header in ROM"
default 0x40
## TODO We may probably move this to board-specific implementation files instead
## of KConfig values.
#config CBFS_CACHE_ADDRESS
# hex "memory address to put CBFS cache data"
# default 0x02060000
#
#config CBFS_CACHE_SIZE
# hex "size of CBFS cache data"
# default 0x000017000
# FIXME: other magic numbers that should probably go away
config XIP_ROM_SIZE
hex
default ROMSTAGE_SIZE
config SYS_SDRAM_BASE
hex
default 0x40000000
# FIXME: this can probably be smaller
config COREBOOT_TABLES_SIZE
hex
default 0x800

View File

@ -0,0 +1,12 @@
bootblock-y += dmtimer.c
bootblock-y += nand.c
bootblock-$(CONFIG_EARLY_CONSOLE) += uart.c
romstage-y += nand.c
romstage-y += uart.c
ramstage-y += dmtimer.c
ramstage-y += monotonic_timer.c
ramstage-y += nand.c
ramstage-y += timer.c
ramstage-y += uart.c

View File

@ -0,0 +1,33 @@
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2013 Google Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <types.h>
#include <arch/cache.h>
void bootblock_cpu_init(void);
void bootblock_cpu_init(void)
{
uint32_t sctlr;
/* enable dcache */
sctlr = read_sctlr();
sctlr |= SCTLR_C;
write_sctlr(sctlr);
}

View File

@ -0,0 +1,29 @@
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2013 Google, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include "dmtimer.h"
void dmtimer_start(int num)
{
}
uint64_t dmtimer_raw_value(int num)
{
return 0;
}

View File

@ -0,0 +1,30 @@
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2013 Google, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#ifndef __CPU_TI_AM335X_DMTIMER_H__
#define __CPU_TI_AM335X_DMTIMER_H__
#include <stdint.h>
#define OSC_HZ 24000000
void dmtimer_start(int num);
uint64_t dmtimer_raw_value(int num);
#endif

View File

@ -0,0 +1,57 @@
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2013 Google, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <stdint.h>
#include <delay.h>
#include <timer.h>
#include "dmtimer.h"
static struct monotonic_counter {
int initialized;
struct mono_time time;
uint64_t last_value;
} mono_counter;
static const uint32_t clocks_per_usec = OSC_HZ/1000000;
void timer_monotonic_get(struct mono_time *mt)
{
uint64_t current_tick;
uint64_t usecs_elapsed;
if (!mono_counter.initialized) {
init_timer();
mono_counter.last_value = dmtimer_raw_value(0);
mono_counter.initialized = 1;
}
current_tick = dmtimer_raw_value(0);
usecs_elapsed = (current_tick - mono_counter.last_value) /
clocks_per_usec;
/* Update current time and tick values only if a full tick occurred. */
if (usecs_elapsed) {
mono_time_add_usecs(&mono_counter.time, usecs_elapsed);
mono_counter.last_value = current_tick;
}
/* Save result. */
*mt = mono_counter.time;
}

26
src/cpu/ti/am335x/nand.c Normal file
View File

@ -0,0 +1,26 @@
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2013 Google Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <cbfs.h>
int init_default_cbfs_media(struct cbfs_media *media)
{
/* FIXME: add support for reading coreboot from NAND */
return 0;
}

51
src/cpu/ti/am335x/timer.c Normal file
View File

@ -0,0 +1,51 @@
/*
* Copyright (C) 2013 Google Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <console/console.h>
#include <delay.h>
#include <timer.h>
void init_timer(void)
{
}
/* delay x useconds */
void udelay(unsigned usec)
{
struct mono_time current, end;
timer_monotonic_get(&current);
end = current;
mono_time_add_usecs(&end, usec);
if (mono_time_after(&current, &end)) {
printk(BIOS_EMERG, "udelay: 0x%08x is impossibly large\n",
usec);
/* There's not much we can do if usec is too big. Use a long,
* paranoid delay value and hope for the best... */
end = current;
mono_time_add_usecs(&end, USECS_PER_SEC);
}
while (mono_time_before(&current, &end))
timer_monotonic_get(&current);
}

137
src/cpu/ti/am335x/uart.c Normal file
View File

@ -0,0 +1,137 @@
/*
* (C) Copyright 2009 SAMSUNG Electronics
* Minkyu Kang <mk7.kang@samsung.com>
* Heungjun Kim <riverful.kim@samsung.com>
*
* based on drivers/serial/s3c64xx.c
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#include <types.h>
#include <uart.h>
#include <arch/io.h>
#include <console/console.h> /* for __console definition */
#include <cpu/ti/am335x/uart.h>
#define RX_FIFO_COUNT_MASK 0xff
#define RX_FIFO_FULL_MASK (1 << 8)
#define TX_FIFO_FULL_MASK (1 << 24)
/*
* Initialise the serial port with the given baudrate. The settings
* are always 8 data bits, no parity, 1 stop bit, no start bits.
*/
static void am335x_uart_init_dev(void)
{
/* FIXME: implement this
* ref: section 19.4.1.1.1 for reset
* ref: section 19.4.1.1.2 for FIFO, skip DMA
* ref: section 19.4.1.1.3 for baud rate, skip
* interrupts and protocol stuff.
* */
#if 0
struct s5p_uart *uart = (struct s5p_uart *)base_port;
// TODO initialize with correct peripheral id by base_port.
exynos_pinmux_config(PERIPH_ID_UART3, PINMUX_FLAG_NONE);
/* enable FIFOs */
writel(0x1, &uart->ufcon);
writel(0, &uart->umcon);
/* 8N1 */
writel(0x3, &uart->ulcon);
/* No interrupts, no DMA, pure polling */
writel(0x245, &uart->ucon);
serial_setbrg_dev();
#endif
}
/*
* Read a single byte from the serial port. Returns 1 on success, 0
* otherwise. When the function is succesfull, the character read is
* written into its argument c.
*/
static unsigned char am335x_uart_rx_byte(void)
{
/* FIXME: stub */
#if 0
struct s5p_uart *uart = (struct s5p_uart *)base_port;
/* wait for character to arrive */
while (!(readl(&uart->ufstat) & (RX_FIFO_COUNT_MASK |
RX_FIFO_FULL_MASK))) {
if (exynos5_uart_err_check(0))
return 0;
}
return readb(&uart->urxh) & 0xff;
#endif
return 0xaa;
}
/*
* Output a single byte to the serial port.
*/
static void am335x_uart_tx_byte(unsigned char data)
{
/* FIXME: stub */
#if 0
struct s5p_uart *uart = (struct s5p_uart *)base_port;
/* wait for room in the tx FIFO */
while ((readl(&uart->ufstat) & TX_FIFO_FULL_MASK)) {
if (exynos5_uart_err_check(1))
return;
}
writeb(data, &uart->utxh);
#endif
}
uint32_t uartmem_getbaseaddr(void)
{
return CONFIG_CONSOLE_SERIAL_UART_ADDRESS;
}
#if !defined(__PRE_RAM__)
static const struct console_driver exynos5_uart_console __console = {
.init = am335x_uart_init_dev,
.tx_byte = am335x_uart_tx_byte,
.rx_byte = am335x_uart_rx_byte,
};
#else
void uart_init(void)
{
am335x_uart_init_dev();
}
unsigned char uart_rx_byte(void)
{
return am335x_uart_rx_byte();
}
void uart_tx_byte(unsigned char data)
{
am335x_uart_tx_byte(data);
}
void uart_tx_flush(void) {
}
#endif

36
src/cpu/ti/am335x/uart.h Normal file
View File

@ -0,0 +1,36 @@
/*
* (C) Copyright 2012 The ChromiumOS Authors
* (C) Copyright 2009 Samsung Electronics
* Minkyu Kang <mk7.kang@samsung.com>
* Heungjun Kim <riverful.kim@samsung.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
* This file is based off of arch/arm/include/asm/arch-exynos5/uart.h
* from u-boot.
*/
#ifndef __AM335X_UART_H_
#define __AM335X_UART_H
#define AM335X_UART0_BASE 0x44e09000
#define AM335X_UART1_BASE 0x48020000
#define AM335X_UART2_BASE 0x48024000
#define AM335X_UART3_BASE 0x481A6000
#define AM335X_UART4_BASE 0x481A8000
#define AM335X_UART5_BASE 0x481AA000
#endif

View File

@ -120,6 +120,8 @@ config VENDOR_TECHNOLOGIC
bool "Technologic" bool "Technologic"
config VENDOR_TELEVIDEO config VENDOR_TELEVIDEO
bool "TeleVideo" bool "TeleVideo"
config VENDOR_TI
bool "TI"
config VENDOR_THOMSON config VENDOR_THOMSON
bool "Thomson" bool "Thomson"
config VENDOR_TRAVERSE config VENDOR_TRAVERSE
@ -194,6 +196,7 @@ source "src/mainboard/technexion/Kconfig"
source "src/mainboard/technologic/Kconfig" source "src/mainboard/technologic/Kconfig"
source "src/mainboard/televideo/Kconfig" source "src/mainboard/televideo/Kconfig"
source "src/mainboard/thomson/Kconfig" source "src/mainboard/thomson/Kconfig"
source "src/mainboard/ti/Kconfig"
source "src/mainboard/traverse/Kconfig" source "src/mainboard/traverse/Kconfig"
source "src/mainboard/tyan/Kconfig" source "src/mainboard/tyan/Kconfig"
source "src/mainboard/via/Kconfig" source "src/mainboard/via/Kconfig"

37
src/mainboard/ti/Kconfig Normal file
View File

@ -0,0 +1,37 @@
##
## This file is part of the coreboot project.
##
## Copyright 2013 Google Inc.
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; version 2 of the License.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
##
if VENDOR_TI
# Auto select common options
choice
prompt "Mainboard model"
config BOARD_TI_BEAGLEBONE
bool "Beaglebone"
endchoice
source "src/mainboard/ti/beaglebone/Kconfig"
config MAINBOARD_VENDOR
string
default "TI"
endif # VENDOR_TI

View File

@ -0,0 +1,153 @@
##
## This file is part of the coreboot project.
##
## Copyright 2013 Google Inc.
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; version 2 of the License.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
##
if BOARD_TI_BEAGLEBONE
config BOARD_SPECIFIC_OPTIONS # dummy
def_bool y
select ARCH_ARMV7
select CPU_TI_AM335X
select HAVE_UART_MEMORY_MAPPED
# FIXME: This should be much smaller
select BOARD_ROMSIZE_KB_128
config MAINBOARD_DIR
string
default ti/beaglebone
config MAINBOARD_PART_NUMBER
string
default "Beaglebone"
config MAX_CPUS
int
default 1
config MAINBOARD_VENDOR
string
default "TI"
config BOOTBLOCK_MAINBOARD_INIT
string
default "mainboard/ti/beaglebone/bootblock.c"
config DRAM_SIZE_MB
int
default 256
config NR_DRAM_BANKS
int
default 1
choice CONSOLE_SERIAL_UART_CHOICES
prompt "Serial Console UART"
default CONSOLE_SERIAL_UART0
depends on CONSOLE_SERIAL_UART
config CONSOLE_SERIAL_UART0
bool "UART0"
help
Serial console on UART0
config CONSOLE_SERIAL_UART1
bool "UART1"
help
Serial console on UART1
config CONSOLE_SERIAL_UART2
bool "UART2"
help
Serial console on UART2
config CONSOLE_SERIAL_UART3
bool "UART3"
help
Serial console on UART3
config CONSOLE_SERIAL_UART4
bool "UART4"
help
Serial console on UART4
config CONSOLE_SERIAL_UART5
bool "UART5"
help
Serial console on UART5
endchoice
config CONSOLE_SERIAL_UART_ADDRESS
hex
depends on CONSOLE_SERIAL_UART
default 0x44e09000 if CONSOLE_SERIAL_UART0
default 0x48022000 if CONSOLE_SERIAL_UART1
default 0x48024000 if CONSOLE_SERIAL_UART2
default 0x481a6000 if CONSOLE_SERIAL_UART3
default 0x481a8000 if CONSOLE_SERIAL_UART4
default 0x481aa000 if CONSOLE_SERIAL_UART5
help
Map the UART names to the respective MMIO address.
#################################################################
# stuff from smdk5250.h #
# FIXME: can we move some of these to exynos5250's Kconfig? #
#################################################################
config SYS_I2C_SPEED
int
default 100000
config I2C_MULTI_BUS
bool
default y
#FIXME: get proper voltages
config VDD_ARM_MV
int
default 1300 #1.3V
config VDD_INT_UV
int
default 1012500 # 1.0125v
config VDD_MIF_MV
int
default 1000 # 1.0v
config VDD_G3D_MV
int
default 1200 # 1.2v
config VDD_LDO2_MV
int
default 1500 # 1.5v
config VDD_LDO3_MV
int
default 1800 # 1.8v
config VDD_LDO5_MV
int
default 1800 # 1.8v
config VDD_LDO10_MV
int
default 1800 # 1.8v
endif # BOARD_TI_BEAGLEBONE

View File

@ -0,0 +1,22 @@
##
## This file is part of the coreboot project.
##
## Copyright (C) 2012 The ChromiumOS Authors. All rights reserved.
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; version 2 of the License.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
##
romstage-y += romstage.c
#ramstage-y += ramstage.c

View File

@ -0,0 +1,31 @@
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2013 The ChromiumOS Authors. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <types.h>
#include <uart.h>
#include <console/console.h>
void bootblock_mainboard_init(void);
void bootblock_mainboard_init(void)
{
/* Start monotonic timer */
//rtc_start();
console_init();
}

View File

@ -0,0 +1,22 @@
##
## This file is part of the coreboot project.
##
## Copyright (C) 2013 Google Inc.
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; version 2 of the License.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
##
chip cpu/ti/am335x
device cpu_cluster 0 on end
end

View File

@ -0,0 +1,23 @@
/*
* Copyright (C) 2012 Google Inc.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; version 2 of
* the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
/* FIXME: this is a stub */
void main(void)
{
}

View File

@ -0,0 +1,37 @@
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2013 Google Inc. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <types.h>
#include <armv7.h>
#include <cbfs.h>
#include <common.h>
#include <arch/stages.h>
#include <console/console.h>
void main(void)
{
void *entry;
entry = cbfs_load_stage(CBFS_DEFAULT_MEDIA, "fallback/coreboot_ram");
printk(BIOS_INFO, "entry is 0x%p, leaving romstage.\n", entry);
stage_exit(entry);
}