mb/google/dedede/var/dibbi: Update devicetree and GPIO table
Create overridetree and GPIO config based on latest schematic: 1. Update PCIe ports 2. Update USB ports 3. Remove unused I2Cs 4. Remove unused peripherals (SD card, eDP, speakers) 5. Add LAN 6. Thermal policy for updated temp sensors BUG=b:260934185, b:260934719 BRANCH=dedede TEST=build Change-Id: I4789be2eee1d01288031bc1e8ee5c9d6df71f9fe Signed-off-by: Liam Flaherty <liamflaherty@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71882 Reviewed-by: Adam Mills <adamjmills@google.com> Reviewed-by: Sam McNally <sammc@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This commit is contained in:
Liam Flaherty
Paul Fagerburg
parent
671cd1d16b
commit
3dba47a53c
|
|
@ -11,6 +11,9 @@ config BOARD_GOOGLE_BOTEN
|
||||||
config BOARD_GOOGLE_DIBBI
|
config BOARD_GOOGLE_DIBBI
|
||||||
bool "-> Dibbi"
|
bool "-> Dibbi"
|
||||||
select BOARD_GOOGLE_BASEBOARD_DEDEDE_CR50
|
select BOARD_GOOGLE_BASEBOARD_DEDEDE_CR50
|
||||||
|
select RT8168_GEN_ACPI_POWER_RESOURCE
|
||||||
|
select RT8168_GET_MAC_FROM_VPD
|
||||||
|
select RT8168_SET_LED_MODE
|
||||||
|
|
||||||
config BOARD_GOOGLE_DEDEDE
|
config BOARD_GOOGLE_DEDEDE
|
||||||
bool "-> Dedede"
|
bool "-> Dedede"
|
||||||
|
|
|
||||||
|
|
@ -0,0 +1,3 @@
|
||||||
|
## SPDX-License-Identifier: GPL-2.0-or-later
|
||||||
|
|
||||||
|
ramstage-y += gpio.c
|
||||||
|
|
@ -0,0 +1,90 @@
|
||||||
|
/* SPDX-License-Identifier: GPL-2.0-or-later */
|
||||||
|
|
||||||
|
#include <baseboard/gpio.h>
|
||||||
|
#include <baseboard/variants.h>
|
||||||
|
|
||||||
|
/* Pad configuration in ramstage */
|
||||||
|
static const struct pad_config gpio_table[] = {
|
||||||
|
/* A11 : TOUCH_RPT_EN */
|
||||||
|
PAD_NC(GPP_A11, NONE),
|
||||||
|
/* A12 : USB_OC1_N */
|
||||||
|
PAD_CFG_NF(GPP_A12, NONE, DEEP, NF1),
|
||||||
|
/* A13 : USB_OC2_N */
|
||||||
|
PAD_CFG_NF(GPP_A13, NONE, DEEP, NF1),
|
||||||
|
/* A14 : USB_OC3_N */
|
||||||
|
PAD_CFG_NF(GPP_A14, NONE, DEEP, NF1),
|
||||||
|
/* A18 : USB_OC0_N */
|
||||||
|
PAD_CFG_NF(GPP_A18, NONE, DEEP, NF1),
|
||||||
|
|
||||||
|
/* D2 : PWM_PP3300_BUZZER */
|
||||||
|
PAD_CFG_GPO(GPP_D2, 1, DEEP),
|
||||||
|
/* D4 : LAN_PE_ISOLATE_ODL_R */
|
||||||
|
PAD_CFG_GPO(GPP_D4, 1, DEEP),
|
||||||
|
/* D5 : TOUCH_RESET_L */
|
||||||
|
PAD_NC(GPP_D5, NONE),
|
||||||
|
/* D6 : EN_PP3300_TOUCH_S0 */
|
||||||
|
PAD_NC(GPP_D6, NONE),
|
||||||
|
/* D17 : LAN_PERST_L */
|
||||||
|
PAD_CFG_GPO(GPP_D17, 1, PLTRST),
|
||||||
|
/* D19 : WWAN_WLAN_COEX1 */
|
||||||
|
PAD_NC(GPP_D19, NONE),
|
||||||
|
/* D20 : WWAN_WLAN_COEX2 */
|
||||||
|
PAD_NC(GPP_D20, NONE),
|
||||||
|
|
||||||
|
/* E13 : GPP_E13/DDI0_DDC_SCL */
|
||||||
|
PAD_CFG_NF(GPP_E13, NONE, DEEP, NF1),
|
||||||
|
/* E14 : GPP_E14/DDI0_DDC_SDA */
|
||||||
|
PAD_CFG_NF(GPP_E14, NONE, DEEP, NF1),
|
||||||
|
/* E15 : GPP_E15/DDI1_DDC_SCL */
|
||||||
|
PAD_CFG_NF(GPP_E15, NONE, DEEP, NF1),
|
||||||
|
/* E16 : GPP_E16/DDI1_DDC_SDA */
|
||||||
|
PAD_CFG_NF(GPP_E16, NONE, DEEP, NF1),
|
||||||
|
|
||||||
|
/* G0 : SD_CMD */
|
||||||
|
PAD_NC(GPP_G0, NONE),
|
||||||
|
/* G1 : SD_DATA0 */
|
||||||
|
PAD_NC(GPP_G1, NONE),
|
||||||
|
/* G2 : SD_DATA1 */
|
||||||
|
PAD_NC(GPP_G2, NONE),
|
||||||
|
/* G3 : SD_DATA2 */
|
||||||
|
PAD_NC(GPP_G3, NONE),
|
||||||
|
/* G4 : SD_DATA3 */
|
||||||
|
PAD_NC(GPP_G4, NONE),
|
||||||
|
/* G5 : SD_CD_ODL */
|
||||||
|
PAD_NC(GPP_G5, NONE),
|
||||||
|
/* G6 : SD_CLK */
|
||||||
|
PAD_NC(GPP_G6, NONE),
|
||||||
|
/* G7 : SD_SDIO_WP */
|
||||||
|
PAD_NC(GPP_G7, NONE),
|
||||||
|
|
||||||
|
/* H4 : AP_I2C_TS_SDA */
|
||||||
|
PAD_NC(GPP_H4, NONE),
|
||||||
|
/* H5 : AP_I2C_TS_SCL */
|
||||||
|
PAD_NC(GPP_H5, NONE),
|
||||||
|
/* H6 : AP_I2C_CAM_SDA */
|
||||||
|
PAD_NC(GPP_H6, NONE),
|
||||||
|
/* H7 : AP_I2C_CAM_SCL */
|
||||||
|
PAD_NC(GPP_H7, NONE),
|
||||||
|
/* H15 : I2S_SPK_BCLK */
|
||||||
|
PAD_NC(GPP_H15, NONE),
|
||||||
|
|
||||||
|
/* R6 : I2S_SPK_LRCK */
|
||||||
|
PAD_NC(GPP_R6, NONE),
|
||||||
|
/* R7 : I2S_SPK_AUDIO */
|
||||||
|
PAD_NC(GPP_R7, NONE),
|
||||||
|
|
||||||
|
/* S2 : DMIC1_CLK */
|
||||||
|
PAD_NC(GPP_S2, NONE),
|
||||||
|
/* S3 : DMIC1_DATA */
|
||||||
|
PAD_NC(GPP_S3, NONE),
|
||||||
|
/* S6 : DMIC0_CLK */
|
||||||
|
PAD_NC(GPP_S6, NONE),
|
||||||
|
/* S7 : DMIC0_DATA */
|
||||||
|
PAD_NC(GPP_S7, NONE),
|
||||||
|
};
|
||||||
|
|
||||||
|
const struct pad_config *variant_override_gpio_table(size_t *num)
|
||||||
|
{
|
||||||
|
*num = ARRAY_SIZE(gpio_table);
|
||||||
|
return gpio_table;
|
||||||
|
}
|
||||||
|
|
@ -8,10 +8,6 @@ chip soc/intel/jasperlake
|
||||||
#| | required to set up a BAR |
|
#| | required to set up a BAR |
|
||||||
#| | for TPM communication |
|
#| | for TPM communication |
|
||||||
#| | before memory is up |
|
#| | before memory is up |
|
||||||
#| I2C0 | Trackpad |
|
|
||||||
#| I2C1 | Digitizer |
|
|
||||||
#| I2C2 | Touchscreen |
|
|
||||||
#| I2C3 | Camera |
|
|
||||||
#| I2C4 | Audio |
|
#| I2C4 | Audio |
|
||||||
#+-------------------+---------------------------+
|
#+-------------------+---------------------------+
|
||||||
register "common_soc_config" = "{
|
register "common_soc_config" = "{
|
||||||
|
|
@ -19,24 +15,202 @@ chip soc/intel/jasperlake
|
||||||
.speed_mhz = 1,
|
.speed_mhz = 1,
|
||||||
.early_init = 1,
|
.early_init = 1,
|
||||||
},
|
},
|
||||||
.i2c[0] = {
|
|
||||||
.speed = I2C_SPEED_FAST,
|
|
||||||
},
|
|
||||||
.i2c[1] = {
|
|
||||||
.speed = I2C_SPEED_FAST,
|
|
||||||
},
|
|
||||||
.i2c[2] = {
|
|
||||||
.speed = I2C_SPEED_FAST,
|
|
||||||
},
|
|
||||||
.i2c[3] = {
|
|
||||||
.speed = I2C_SPEED_FAST,
|
|
||||||
},
|
|
||||||
.i2c[4] = {
|
.i2c[4] = {
|
||||||
.speed = I2C_SPEED_FAST,
|
.speed = I2C_SPEED_FAST,
|
||||||
},
|
},
|
||||||
}"
|
}"
|
||||||
|
|
||||||
|
# Enable Root Port 3 (index 2) for LAN
|
||||||
|
# External PCIe port 7 is mapped to PCIe Root Port 3
|
||||||
|
register "PcieRpEnable[2]" = "1"
|
||||||
|
register "PcieClkSrcUsage[4]" = "2"
|
||||||
|
|
||||||
|
# Enable Root Port 7 (index 6) for WLAN
|
||||||
|
# External PCIe port 3 is mapped to PCIe Root Port 7
|
||||||
|
register "PcieRpEnable[6]" = "1"
|
||||||
|
register "PcieClkSrcUsage[3]" = "6"
|
||||||
|
|
||||||
|
# Disable PCIe Root Port 8
|
||||||
|
register "PcieRpEnable[7]" = "0"
|
||||||
|
|
||||||
|
# Audio related configurations
|
||||||
|
register "PchHdaAudioLinkDmicEnable[0]" = "0"
|
||||||
|
register "PchHdaAudioLinkDmicEnable[1]" = "0"
|
||||||
|
|
||||||
|
# Disable SD card
|
||||||
|
register "sdcard_cd_gpio" = "0"
|
||||||
|
register "SdCardPowerEnableActiveHigh" = "0"
|
||||||
|
|
||||||
|
# Disable eDP on port A
|
||||||
|
register "DdiPortAConfig" = "0"
|
||||||
|
|
||||||
|
# Enable HPD and DDC for DDI port A
|
||||||
|
register "DdiPortAHpd" = "1"
|
||||||
|
register "DdiPortADdc" = "1"
|
||||||
|
|
||||||
|
# USB Port Configuration
|
||||||
|
register "usb2_ports[1]" = "USB2_PORT_MID(OC_SKIP)" # Type-A Port A0
|
||||||
|
register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # Type-A Port A1
|
||||||
|
register "usb2_ports[3]" = "USB2_PORT_MID(OC_SKIP)" # Type-A Port A2
|
||||||
|
register "usb2_ports[4]" = "USB2_PORT_MID(OC_SKIP)" # Type-A Port A3
|
||||||
|
|
||||||
|
register "usb3_ports[1]" = "USB3_PORT_EMPTY" # No USB3/2 Type-C Port C1
|
||||||
|
register "usb3_ports[4]" = "USB3_PORT_DEFAULT(OC_SKIP)" # USB3/1 Type-A Port A2
|
||||||
|
register "usb3_ports[5]" = "USB3_PORT_DEFAULT(OC_SKIP)" # USB3/1 Type-A Port A3
|
||||||
|
|
||||||
device domain 0 on
|
device domain 0 on
|
||||||
device pci 15.0 on end
|
device pci 04.0 on
|
||||||
|
chip drivers/intel/dptf
|
||||||
|
## Passive Policy
|
||||||
|
register "policies.passive" = "{
|
||||||
|
[0] = DPTF_PASSIVE(CPU, CPU, 90, 10000),
|
||||||
|
[1] = DPTF_PASSIVE(CPU, TEMP_SENSOR_0, 80, 60000),
|
||||||
|
[2] = DPTF_PASSIVE(CPU, TEMP_SENSOR_1, 75, 15000),
|
||||||
|
[3] = DPTF_PASSIVE(CPU, TEMP_SENSOR_2, 55, 15000)
|
||||||
|
}"
|
||||||
|
|
||||||
|
## Critical Policy
|
||||||
|
register "policies.critical" = "{
|
||||||
|
[0] = DPTF_CRITICAL(CPU, 105, SHUTDOWN),
|
||||||
|
[1] = DPTF_CRITICAL(TEMP_SENSOR_0, 90, SHUTDOWN),
|
||||||
|
[2] = DPTF_CRITICAL(TEMP_SENSOR_1, 80, SHUTDOWN),
|
||||||
|
[3] = DPTF_CRITICAL(TEMP_SENSOR_2, 80, SHUTDOWN)
|
||||||
|
}"
|
||||||
|
|
||||||
|
register "controls.power_limits" = "{
|
||||||
|
.pl1 = {
|
||||||
|
.min_power = 3000,
|
||||||
|
.max_power = 6000,
|
||||||
|
.time_window_min = 1 * MSECS_PER_SEC,
|
||||||
|
.time_window_max = 1 * MSECS_PER_SEC,
|
||||||
|
.granularity = 100,
|
||||||
|
},
|
||||||
|
.pl2 = {
|
||||||
|
.min_power = 20000,
|
||||||
|
.max_power = 20000,
|
||||||
|
.time_window_min = 1 * MSECS_PER_SEC,
|
||||||
|
.time_window_max = 1 * MSECS_PER_SEC,
|
||||||
|
.granularity = 1000,
|
||||||
|
}
|
||||||
|
}"
|
||||||
|
|
||||||
|
register "options.tsr[0].desc" = ""Memory""
|
||||||
|
register "options.tsr[1].desc" = ""Power""
|
||||||
|
register "options.tsr[2].desc" = ""Chassis""
|
||||||
|
|
||||||
|
## Charger Performance Control (Control, mA)
|
||||||
|
register "controls.charger_perf" = "{
|
||||||
|
[0] = { 255, 3000 },
|
||||||
|
[1] = { 24, 1500 },
|
||||||
|
[2] = { 16, 1000 },
|
||||||
|
[3] = { 8, 500 }
|
||||||
|
}"
|
||||||
|
|
||||||
|
device generic 0 on end
|
||||||
|
end
|
||||||
|
end # SA Thermal device
|
||||||
|
device pci 14.0 on
|
||||||
|
chip drivers/usb/acpi
|
||||||
|
# TODO (b/264960828) verify PLD values
|
||||||
|
device usb 0.0 on
|
||||||
|
chip drivers/usb/acpi
|
||||||
|
register "desc" = ""USB2 Type-C Port C0""
|
||||||
|
register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
|
||||||
|
register "group" = "ACPI_PLD_GROUP(1, 1)"
|
||||||
|
device usb 2.0 on end
|
||||||
|
end
|
||||||
|
chip drivers/usb/acpi
|
||||||
|
register "desc" = ""USB2 Type-A Port A0""
|
||||||
|
register "type" = "UPC_TYPE_A"
|
||||||
|
register "group" = "ACPI_PLD_GROUP(1, 2)"
|
||||||
|
device usb 2.1 on end
|
||||||
|
end
|
||||||
|
chip drivers/usb/acpi
|
||||||
|
register "desc" = ""USB2 Type-A Port A1""
|
||||||
|
register "type" = "UPC_TYPE_A"
|
||||||
|
register "group" = "ACPI_PLD_GROUP(1, 3)"
|
||||||
|
device usb 2.2 on end
|
||||||
|
end
|
||||||
|
chip drivers/usb/acpi
|
||||||
|
register "desc" = ""USB2 Type-A Port A2""
|
||||||
|
register "type" = "UPC_TYPE_A"
|
||||||
|
register "group" = "ACPI_PLD_GROUP(1, 4)"
|
||||||
|
device usb 2.3 on end
|
||||||
|
end
|
||||||
|
chip drivers/usb/acpi
|
||||||
|
register "desc" = ""USB2 Type-A Port A3""
|
||||||
|
register "type" = "UPC_TYPE_A"
|
||||||
|
register "group" = "ACPI_PLD_GROUP(1, 5)"
|
||||||
|
device usb 2.4 on end
|
||||||
|
end
|
||||||
|
chip drivers/usb/acpi
|
||||||
|
register "desc" = ""USB3 Type-C Port C0""
|
||||||
|
register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
|
||||||
|
register "group" = "ACPI_PLD_GROUP(1, 1)"
|
||||||
|
device usb 3.0 on end
|
||||||
|
end
|
||||||
|
chip drivers/usb/acpi
|
||||||
|
device usb 3.1 off end
|
||||||
|
end
|
||||||
|
chip drivers/usb/acpi
|
||||||
|
register "desc" = ""USB3 Type-A Port A0""
|
||||||
|
register "type" = "UPC_TYPE_USB3_A"
|
||||||
|
register "group" = "ACPI_PLD_GROUP(1, 2)"
|
||||||
|
device usb 3.2 on end
|
||||||
|
end
|
||||||
|
chip drivers/usb/acpi
|
||||||
|
register "desc" = ""USB3 Type-A Port A1""
|
||||||
|
register "type" = "UPC_TYPE_USB3_A"
|
||||||
|
register "group" = "ACPI_PLD_GROUP(1, 3)"
|
||||||
|
device usb 3.3 on end
|
||||||
|
end
|
||||||
|
chip drivers/usb/acpi
|
||||||
|
register "desc" = ""USB3 Type-A Port A2""
|
||||||
|
register "type" = "UPC_TYPE_USB3_A"
|
||||||
|
register "group" = "ACPI_PLD_GROUP(1, 4)"
|
||||||
|
device usb 3.4 on end
|
||||||
|
end
|
||||||
|
chip drivers/usb/acpi
|
||||||
|
register "desc" = ""USB3 Type-A Port A3""
|
||||||
|
register "type" = "UPC_TYPE_USB3_A"
|
||||||
|
register "group" = "ACPI_PLD_GROUP(1, 5)"
|
||||||
|
device usb 3.5 on end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
end # USB xHCI
|
||||||
|
device pci 15.0 off end # I2C 0
|
||||||
|
device pci 15.1 off end # I2C 1
|
||||||
|
device pci 15.2 off end # I2C 2
|
||||||
|
device pci 15.3 off end # I2C 3
|
||||||
|
device pci 19.0 on
|
||||||
|
chip drivers/i2c/generic
|
||||||
|
register "hid" = ""10EC5682""
|
||||||
|
register "name" = ""RT58""
|
||||||
|
register "desc" = ""Realtek RT5682""
|
||||||
|
register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_D16)"
|
||||||
|
register "property_count" = "1"
|
||||||
|
register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER"
|
||||||
|
register "property_list[0].name" = ""realtek,jd-src""
|
||||||
|
register "property_list[0].integer" = "1"
|
||||||
|
device i2c 1a on end
|
||||||
|
end
|
||||||
|
end # I2C 4
|
||||||
|
device pci 1c.2 on
|
||||||
|
chip drivers/net
|
||||||
|
register "customized_leds" = "0x05af"
|
||||||
|
register "wake" = "GPE0_DW0_03" # GPP_B3
|
||||||
|
register "stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D4)"
|
||||||
|
register "device_index" = "0"
|
||||||
|
device pci 00.0 on end
|
||||||
|
end
|
||||||
|
end # PCI Express Root Port 3 - RTL8111H LAN
|
||||||
|
device pci 1c.6 on
|
||||||
|
chip drivers/wifi/generic
|
||||||
|
register "wake" = "GPE0_DW2_03"
|
||||||
|
device pci 00.0 on end
|
||||||
|
end
|
||||||
|
end # PCI Express Root Port 7 - WLAN
|
||||||
|
device pci 1c.7 off end # PCI Express Root Port 8
|
||||||
end
|
end
|
||||||
end
|
end
|
||||||
|
|
|
||||||
Loading…
Reference in New Issue