soc/amd/common/data_fabric/domain: provide scan_bus and read_resources

Provide amd_pci_domain_scan_bus to enumerate the PCI buses in the one
PCI root domain and amd_pci_domain_read_resources to read the MMIO
regions that the resource allocator can use to allocate the PCI MMIO
BARs in the one PCI root domain from the corresponding data fabric MMIO
decode registers. This makes sure that the allocator will only put PCI
MMIO resources in areas that are decoded to the PCIe root complex. The
current code only covers the case of a system with one PCI root where
all PCI bus numbers belong to the only PCI root, all IO ports get
decoded to the only PCI root and the MMIO regions from the data fabric
MMIO decode registers get decoded to the only PCI root. In future
patches, this will be extended to also support the multi PCI root case.

TEST=With also the rest of the current patch train applied, the resource
allocator uses the constraints on the MMIO regions and both Linux and
Windows boot on Mandolin.

Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I4aada7c8a2a43145ad08d11d0a38d9cdc182b98e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74717
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This commit is contained in:
Felix Held 2023-04-24 17:58:24 +02:00
parent 11ff753407
commit 407bd58da1
4 changed files with 178 additions and 4 deletions

View File

@ -3,3 +3,12 @@ config SOC_AMD_COMMON_BLOCK_DATA_FABRIC
help help
Select this option to add data fabric configuration related Select this option to add data fabric configuration related
functionality to the build. functionality to the build.
config SOC_AMD_COMMON_BLOCK_DATA_FABRIC_DOMAIN
bool
depends on SOC_AMD_COMMON_BLOCK_DATA_FABRIC
help
Select this option to add functionality to the build to tell the
resource allocator about the MMIO regions configured in the data
fabric registers so that it knows in which regions it can properly
allocate the non-fixed MMIO devices.

View File

@ -1,6 +1,4 @@
## SPDX-License-Identifier: GPL-2.0-only ## SPDX-License-Identifier: GPL-2.0-only
ifeq ($(CONFIG_SOC_AMD_COMMON_BLOCK_DATA_FABRIC),y)
ramstage-y += data_fabric_helper.c ramstage-$(CONFIG_SOC_AMD_COMMON_BLOCK_DATA_FABRIC) += data_fabric_helper.c
ramstage-$(CONFIG_SOC_AMD_COMMON_BLOCK_DATA_FABRIC_DOMAIN) += domain.c
endif # CONFIG_SOC_AMD_COMMON_BLOCK_DATA_FABRIC

View File

@ -0,0 +1,160 @@
/* SPDX-License-Identifier: GPL-2.0-only */
#include <amdblocks/cpu.h>
#include <amdblocks/data_fabric.h>
#include <arch/ioapic.h>
#include <console/console.h>
#include <cpu/amd/mtrr.h>
#include <device/device.h>
#include <device/pci_ops.h>
#include <types.h>
void amd_pci_domain_scan_bus(struct device *domain)
{
uint8_t bus, limit;
/* TODO: Systems with more than one PCI root need to read the data fabric registers to
see which PCI bus numbers get decoded to which PCI root. */
bus = 0;
limit = CONFIG_ECAM_MMCONF_BUS_NUMBER - 1;
/* Set bus first number of PCI root */
domain->link_list->secondary = bus;
/* subordinate needs to be the same as secondary before pci_domain_scan_bus call. */
domain->link_list->subordinate = bus;
pci_domain_scan_bus(domain);
/* pci_domain_scan_bus will modify subordinate, so change it back to the maximum
bus number decoded to this PCI root for the acpigen_resource_producer_bus_number
call to write the correct ACPI code. */
domain->link_list->subordinate = limit;
}
/* Read the registers and return normalized values */
static void data_fabric_get_mmio_base_size(unsigned int reg,
resource_t *mmio_base, resource_t *mmio_limit)
{
const uint32_t base_reg = data_fabric_broadcast_read32(0, DF_MMIO_BASE(reg));
const uint32_t limit_reg = data_fabric_broadcast_read32(0, DF_MMIO_LIMIT(reg));
/* The raw register values are bits 47..16 of the actual address */
*mmio_base = (resource_t)base_reg << D18F0_MMIO_SHIFT;
*mmio_limit = (((resource_t)limit_reg + 1) << D18F0_MMIO_SHIFT) - 1;
}
static void print_df_mmio_outside_of_cpu_mmio_error(unsigned int reg)
{
printk(BIOS_WARNING, "DF MMIO register %u outside of CPU MMIO region.\n", reg);
}
static bool is_mmio_region_valid(unsigned int reg, resource_t mmio_base, resource_t mmio_limit)
{
if (mmio_base > mmio_limit) {
printk(BIOS_WARNING, "DF MMIO register %u's base is above its limit.\n", reg);
return false;
}
if (mmio_base >= 4ULL * GiB) {
/* MMIO region above 4GB needs to be above TOP_MEM2 MSR value */
if (mmio_base < get_top_of_mem_above_4gb()) {
print_df_mmio_outside_of_cpu_mmio_error(reg);
return false;
}
} else {
/* MMIO region below 4GB needs to be above TOP_MEM MSR value */
if (mmio_base < get_top_of_mem_below_4gb()) {
print_df_mmio_outside_of_cpu_mmio_error(reg);
return false;
}
/* MMIO region below 4GB mustn't cross the 4GB boundary. */
if (mmio_limit >= 4ULL * GiB) {
printk(BIOS_WARNING, "DF MMIO register %u crosses 4GB boundary.\n",
reg);
return false;
}
}
return true;
}
static void report_data_fabric_mmio(struct device *domain, unsigned int idx,
resource_t mmio_base, resource_t mmio_limit)
{
struct resource *res;
res = new_resource(domain, idx);
res->base = mmio_base;
res->limit = mmio_limit;
res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED;
}
/* Tell the resource allocator about the usable MMIO ranges configured in the data fabric */
static void add_data_fabric_mmio_regions(struct device *domain, unsigned int *idx)
{
union df_mmio_control ctrl;
resource_t mmio_base;
resource_t mmio_limit;
/* The last 12GB of the usable address space are reserved and can't be used for MMIO */
const resource_t reserved_upper_mmio_base =
(1ULL << get_usable_physical_address_bits()) - DF_RESERVED_TOP_12GB_MMIO_SIZE;
for (unsigned int i = 0; i < DF_MMIO_REG_SET_COUNT; i++) {
ctrl.raw = data_fabric_broadcast_read32(0, DF_MMIO_CONTROL(i));
/* Relevant MMIO regions need to have both reads and writes enabled */
if (!ctrl.we || !ctrl.re)
continue;
/* Non-posted region contains fixed FCH MMIO devices */
if (ctrl.np)
continue;
/* TODO: Systems with more than one PCI root need to check to which PCI root
the MMIO range gets decoded to. */
data_fabric_get_mmio_base_size(i, &mmio_base, &mmio_limit);
if (!is_mmio_region_valid(i, mmio_base, mmio_limit))
continue;
/* Make sure to not report a region overlapping with the fixed MMIO resources
below 4GB or the reserved MMIO range in the last 12GB of the addressable
address range. The code assumes that the fixed MMIO resources below 4GB
are between IO_APIC_ADDR and the 4GB boundary. */
if (mmio_base < 4ULL * GiB) {
if (mmio_base >= IO_APIC_ADDR)
continue;
if (mmio_limit >= IO_APIC_ADDR)
mmio_limit = IO_APIC_ADDR - 1;
} else {
if (mmio_base >= reserved_upper_mmio_base)
continue;
if (mmio_limit >= reserved_upper_mmio_base)
mmio_limit = reserved_upper_mmio_base - 1;
}
report_data_fabric_mmio(domain, (*idx)++, mmio_base, mmio_limit);
}
}
/* Tell the resource allocator about the usable I/O space */
static void add_io_regions(struct device *domain, unsigned int *idx)
{
struct resource *res;
/* TODO: Systems with more than one PCI root need to read the data fabric registers to
see which IO ranges get decoded to which PCI root. */
res = new_resource(domain, (*idx)++);
res->base = 0;
res->limit = 0xffff;
res->flags = IORESOURCE_IO | IORESOURCE_ASSIGNED;
}
void amd_pci_domain_read_resources(struct device *domain)
{
unsigned int idx = 0;
add_io_regions(domain, &idx);
add_data_fabric_mmio_regions(domain, &idx);
}

View File

@ -18,6 +18,9 @@
#define DF_MMIO_LIMIT(reg) (D18F0_MMIO_LIMIT0 + DF_MMIO_REG_OFFSET(reg)) #define DF_MMIO_LIMIT(reg) (D18F0_MMIO_LIMIT0 + DF_MMIO_REG_OFFSET(reg))
#define DF_MMIO_CONTROL(reg) (D18F0_MMIO_CTRL0 + DF_MMIO_REG_OFFSET(reg)) #define DF_MMIO_CONTROL(reg) (D18F0_MMIO_CTRL0 + DF_MMIO_REG_OFFSET(reg))
/* Last 12GB of the usable address space are reserved */
#define DF_RESERVED_TOP_12GB_MMIO_SIZE (12ULL * GiB)
uint32_t data_fabric_read32(uint8_t function, uint16_t reg, uint8_t instance_id); uint32_t data_fabric_read32(uint8_t function, uint16_t reg, uint8_t instance_id);
void data_fabric_write32(uint8_t function, uint16_t reg, uint8_t instance_id, uint32_t data); void data_fabric_write32(uint8_t function, uint16_t reg, uint8_t instance_id, uint32_t data);
@ -40,4 +43,8 @@ void data_fabric_disable_mmio_reg(unsigned int reg);
int data_fabric_find_unused_mmio_reg(void); int data_fabric_find_unused_mmio_reg(void);
void data_fabric_set_mmio_np(void); void data_fabric_set_mmio_np(void);
/* Inform the resource allocator about the usable IO and MMIO regions and PCI bus numbers */
void amd_pci_domain_read_resources(struct device *domain);
void amd_pci_domain_scan_bus(struct device *domain);
#endif /* AMD_BLOCK_DATA_FABRIC_H */ #endif /* AMD_BLOCK_DATA_FABRIC_H */