Add support for the VIA VT8237R southbridge.
Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: <corey.osgood@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2907 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This commit is contained in:
Rudolf Marek
Uwe Hermann
parent
af6e745173
commit
418bc919d0
|
|
@ -1138,6 +1138,21 @@
|
||||||
#define PCI_DEVICE_ID_VIA_8505_1 0x8605
|
#define PCI_DEVICE_ID_VIA_8505_1 0x8605
|
||||||
#define PCI_DEVICE_ID_VIA_8633_1 0xB091
|
#define PCI_DEVICE_ID_VIA_8633_1 0xB091
|
||||||
#define PCI_DEVICE_ID_VIA_8367_1 0xB099
|
#define PCI_DEVICE_ID_VIA_8367_1 0xB099
|
||||||
|
#define PCI_DEVICE_ID_VIA_K8T890CE_0 0x0238
|
||||||
|
#define PCI_DEVICE_ID_VIA_K8T890CE_1 0x1238
|
||||||
|
#define PCI_DEVICE_ID_VIA_K8T890CE_2 0x2238
|
||||||
|
#define PCI_DEVICE_ID_VIA_K8T890CE_3 0x3238
|
||||||
|
#define PCI_DEVICE_ID_VIA_K8T890CE_4 0x4238
|
||||||
|
#define PCI_DEVICE_ID_VIA_K8T890CE_5 0x5238
|
||||||
|
#define PCI_DEVICE_ID_VIA_K8T890CE_7 0x7238
|
||||||
|
#define PCI_DEVICE_ID_VIA_K8T890CE_PEG 0xa238
|
||||||
|
#define PCI_DEVICE_ID_VIA_K8T890CE_PEX0 0xc238
|
||||||
|
#define PCI_DEVICE_ID_VIA_K8T890CE_PEX1 0xd238
|
||||||
|
#define PCI_DEVICE_ID_VIA_K8T890CE_PEX2 0xe238
|
||||||
|
#define PCI_DEVICE_ID_VIA_K8T890CE_PEX3 0xf238
|
||||||
|
#define PCI_DEVICE_ID_VIA_K8T890CE_BR 0xb188
|
||||||
|
#define PCI_DEVICE_ID_VIA_VT6420_SATA 0x3149
|
||||||
|
#define PCI_DEVICE_ID_VIA_VT8237R_LPC 0x3227
|
||||||
|
|
||||||
#define PCI_VENDOR_ID_SIEMENS 0x110A
|
#define PCI_VENDOR_ID_SIEMENS 0x110A
|
||||||
#define PCI_DEVICE_ID_SIEMENS_DSCC4 0x2102
|
#define PCI_DEVICE_ID_SIEMENS_DSCC4 0x2102
|
||||||
|
|
|
||||||
|
|
@ -0,0 +1,26 @@
|
||||||
|
##
|
||||||
|
## This file is part of the LinuxBIOS project.
|
||||||
|
##
|
||||||
|
## Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz>
|
||||||
|
##
|
||||||
|
## This program is free software; you can redistribute it and/or modify
|
||||||
|
## it under the terms of the GNU General Public License v2 as published by
|
||||||
|
## the Free Software Foundation.
|
||||||
|
##
|
||||||
|
## This program is distributed in the hope that it will be useful,
|
||||||
|
## but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
## GNU General Public License for more details.
|
||||||
|
##
|
||||||
|
## You should have received a copy of the GNU General Public License
|
||||||
|
## along with this program; if not, write to the Free Software
|
||||||
|
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||||
|
##
|
||||||
|
|
||||||
|
config chip.h
|
||||||
|
|
||||||
|
driver vt8237r.o
|
||||||
|
driver vt8237r_ide.o
|
||||||
|
driver vt8237r_lpc.o
|
||||||
|
driver vt8237r_sata.o
|
||||||
|
driver vt8237r_bridge.o
|
||||||
|
|
@ -0,0 +1,60 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the LinuxBIOS project.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz>
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License v2 as published by
|
||||||
|
* the Free Software Foundation.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program; if not, write to the Free Software
|
||||||
|
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef SOUTHBRIDGE_VIA_VT8237R_CHIP_H
|
||||||
|
#define SOUTHBRIDGE_VIA_VT8237R_CHIP_H
|
||||||
|
|
||||||
|
#include <stdint.h>
|
||||||
|
|
||||||
|
extern struct chip_operations southbridge_via_vt8237r_ops;
|
||||||
|
|
||||||
|
struct southbridge_via_vt8237r_config {
|
||||||
|
/**
|
||||||
|
* Function disable. 1 = disabled.
|
||||||
|
* 7 Dev 17 fn 6 MC97
|
||||||
|
* 6 Dev 17 fn 5 AC97
|
||||||
|
* 5 Dev 16 fn 1 USB 1.1 UHCI Ports 2-3
|
||||||
|
* 4 Dev 16 fn 0 USB 1.1 UHCI Ports 0-1
|
||||||
|
* 3 Dev 15 fn 0 Serial ATA
|
||||||
|
* 2 Dev 16 fn 2 USB 1.1 UHCI Ports 4-5
|
||||||
|
* 1 Dev 16 fn 4 USB 2.0 EHCI
|
||||||
|
* 0 Dev 16 fn 3 USB 1.1 UHCI Ports 6-7
|
||||||
|
*/
|
||||||
|
u16 fn_ctrl_lo;
|
||||||
|
|
||||||
|
/**
|
||||||
|
* 7 USB Device Mode 1=dis
|
||||||
|
* 6 Reserved
|
||||||
|
* 5 Internal LAN Controller Clock Gating 1=gated
|
||||||
|
* 4 Internal LAN Controller 1=di
|
||||||
|
* 3 Internal RTC 1=en
|
||||||
|
* 2 Internal PS2 Mouse 1=en
|
||||||
|
* 1 Internal KBC Configuration 0=dis ports 0x2e/0x2f off 0xe0-0xef
|
||||||
|
* 0 Internal Keyboard Controller 1=en
|
||||||
|
*/
|
||||||
|
u16 fn_ctrl_hi;
|
||||||
|
|
||||||
|
int ide0_enable:1;
|
||||||
|
int ide1_enable:1;
|
||||||
|
/* 1 = 80-pin cable */
|
||||||
|
int ide0_80pin_cable:1;
|
||||||
|
int ide1_80pin_cable:1;
|
||||||
|
};
|
||||||
|
|
||||||
|
#endif /* SOUTHBRIDGE_VIA_VT8237R_CHIP_H */
|
||||||
|
|
@ -0,0 +1,89 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the LinuxBIOS project.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz>
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License v2 as published by
|
||||||
|
* the Free Software Foundation.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program; if not, write to the Free Software
|
||||||
|
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <console/console.h>
|
||||||
|
#include <device/device.h>
|
||||||
|
#include <device/pci.h>
|
||||||
|
#include <device/pci_ops.h>
|
||||||
|
#include <device/pci_ids.h>
|
||||||
|
#include <pc80/keyboard.h>
|
||||||
|
#include "chip.h"
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Datasheet: http://www.via.com.tw/en/downloads/datasheets/chipsets/
|
||||||
|
* VT8237R_SouthBridge_Revision2.06_Lead-Free.zip
|
||||||
|
*/
|
||||||
|
|
||||||
|
void hard_reset(void)
|
||||||
|
{
|
||||||
|
printk_err("NO HARD RESET ON VT8237R! FIX ME!\n");
|
||||||
|
}
|
||||||
|
|
||||||
|
#if DEFAULT_CONSOLE_LOGLEVEL > 7
|
||||||
|
void writeback(struct device *dev, u16 where, u8 what)
|
||||||
|
{
|
||||||
|
u8 regval;
|
||||||
|
|
||||||
|
pci_write_config8(dev, where, what);
|
||||||
|
regval = pci_read_config8(dev, where);
|
||||||
|
|
||||||
|
if (regval != what) {
|
||||||
|
print_debug("Writeback to ");
|
||||||
|
print_debug_hex8(where);
|
||||||
|
print_debug("failed ");
|
||||||
|
print_debug_hex8(regval);
|
||||||
|
print_debug("\n "); /* TODO: Drop the space? */
|
||||||
|
}
|
||||||
|
}
|
||||||
|
#else
|
||||||
|
void writeback(struct device *dev, u16 where, u8 what)
|
||||||
|
{
|
||||||
|
pci_write_config8(dev, where, what);
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
void dump_south(device_t dev)
|
||||||
|
{
|
||||||
|
int i, j;
|
||||||
|
|
||||||
|
for (i = 0; i < 256; i += 16) {
|
||||||
|
printk_debug("%02x: ", i);
|
||||||
|
for (j = 0; j < 16; j++) {
|
||||||
|
printk_debug("%02x ",
|
||||||
|
pci_read_config8(dev, i + j));
|
||||||
|
}
|
||||||
|
printk_debug("\n");
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
static void vt8237r_enable(struct device *dev)
|
||||||
|
{
|
||||||
|
struct southbridge_via_vt8237r_config *sb =
|
||||||
|
(struct southbridge_via_vt8237r_config *) dev->chip_info;
|
||||||
|
|
||||||
|
pci_write_config8(dev, 0x50, sb->fn_ctrl_lo);
|
||||||
|
pci_write_config8(dev, 0x51, sb->fn_ctrl_hi);
|
||||||
|
|
||||||
|
/* TODO: If SATA is disabled, move IDE to fn0 to conform PCI specs. */
|
||||||
|
}
|
||||||
|
|
||||||
|
struct chip_operations southbridge_via_vt8237r_ops = {
|
||||||
|
CHIP_NAME("VIA VT8237R Southbridge")
|
||||||
|
.enable_dev = vt8237r_enable,
|
||||||
|
};
|
||||||
|
|
@ -0,0 +1,33 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the LinuxBIOS project.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz>
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License v2 as published by
|
||||||
|
* the Free Software Foundation.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program; if not, write to the Free Software
|
||||||
|
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef SOUTHBRIDGE_VIA_VT8237R_VT8237R_H
|
||||||
|
#define SOUTHBRIDGE_VIA_VT8237R_VT8237R_H
|
||||||
|
|
||||||
|
/* Static resources for the VT8237R southbridge. */
|
||||||
|
|
||||||
|
#define VT8237R_APIC_ID 0x2
|
||||||
|
#define VT8237R_ACPI_IO_BASE 0x500
|
||||||
|
#define VT8237R_SMBUS_IO_BASE 0x400
|
||||||
|
/* 0x0 disabled, 0x2 reserved, 0xf = IRQ15 */
|
||||||
|
#define VT8237R_ACPI_IRQ 0x9
|
||||||
|
#define VT8237R_HPET_ADDR 0xfed00000ULL
|
||||||
|
#define VT8237R_APIC_BASE 0xfec00000ULL
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
@ -0,0 +1,57 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the LinuxBIOS project.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz>
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License v2 as published by
|
||||||
|
* the Free Software Foundation.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program; if not, write to the Free Software
|
||||||
|
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <device/device.h>
|
||||||
|
#include <device/pci.h>
|
||||||
|
#include <device/pci_ops.h>
|
||||||
|
#include <device/pci_ids.h>
|
||||||
|
#include <console/console.h>
|
||||||
|
|
||||||
|
static void bridge_enable(struct device *dev)
|
||||||
|
{
|
||||||
|
print_debug("B188 device dump\n");
|
||||||
|
|
||||||
|
/* VIA recommends this, sorry no known info. */
|
||||||
|
writeback(dev, 0x40, 0x91);
|
||||||
|
writeback(dev, 0x41, 0x40);
|
||||||
|
writeback(dev, 0x43, 0x44);
|
||||||
|
writeback(dev, 0x44, 0x31);
|
||||||
|
writeback(dev, 0x45, 0x3a);
|
||||||
|
writeback(dev, 0x46, 0x88); /* PCI ID lo */
|
||||||
|
writeback(dev, 0x47, 0xb1); /* PCI ID hi */
|
||||||
|
writeback(dev, 0x3e, 0x16); /* Bridge control */
|
||||||
|
|
||||||
|
dump_south(dev);
|
||||||
|
}
|
||||||
|
|
||||||
|
static struct device_operations bridge_ops = {
|
||||||
|
.read_resources = pci_bus_read_resources,
|
||||||
|
.set_resources = pci_dev_set_resources,
|
||||||
|
.enable_resources = pci_bus_enable_resources,
|
||||||
|
.enable = bridge_enable,
|
||||||
|
.scan_bus = pci_scan_bridge,
|
||||||
|
.reset_bus = pci_bus_reset,
|
||||||
|
.ops_pci = 0,
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct pci_driver northbridge_driver __pci_driver = {
|
||||||
|
.ops = &bridge_ops,
|
||||||
|
.vendor = PCI_VENDOR_ID_VIA,
|
||||||
|
.device = PCI_DEVICE_ID_VIA_K8T890CE_BR,
|
||||||
|
};
|
||||||
|
|
@ -0,0 +1,168 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the LinuxBIOS project.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2007 Corey Osgood <corey_osgood@verizon.net>
|
||||||
|
* Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz>
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation; either version 2 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program; if not, write to the Free Software
|
||||||
|
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <device/pci_ids.h>
|
||||||
|
#include "vt8237r.h"
|
||||||
|
|
||||||
|
#define VT8237R_POWER_WELL 0x94
|
||||||
|
#define VT8237R_SMBUS_IO_BASE_REG 0xd0
|
||||||
|
#define VT8237R_SMBUS_HOST_CONF 0xd2
|
||||||
|
|
||||||
|
#define SMBHSTSTAT (VT8237R_SMBUS_IO_BASE + 0x0)
|
||||||
|
#define SMBSLVSTAT (VT8237R_SMBUS_IO_BASE + 0x1)
|
||||||
|
#define SMBHSTCTL (VT8237R_SMBUS_IO_BASE + 0x2)
|
||||||
|
#define SMBHSTCMD (VT8237R_SMBUS_IO_BASE + 0x3)
|
||||||
|
#define SMBXMITADD (VT8237R_SMBUS_IO_BASE + 0x4)
|
||||||
|
#define SMBHSTDAT0 (VT8237R_SMBUS_IO_BASE + 0x5)
|
||||||
|
|
||||||
|
#define HOST_RESET 0xff
|
||||||
|
/* 1 in the 0 bit of SMBHSTADD states to READ. */
|
||||||
|
#define READ_CMD 0x01
|
||||||
|
#define SMBUS_TIMEOUT (100 * 1000 * 10)
|
||||||
|
#define I2C_TRANS_CMD 0x40
|
||||||
|
#define CLOCK_SLAVE_ADDRESS 0x69
|
||||||
|
|
||||||
|
#if DEBUG_SMBUS == 1
|
||||||
|
#define PRINT_DEBUG(x) print_debug(x)
|
||||||
|
#define PRINT_DEBUG_HEX16(x) print_debug_hex16(x)
|
||||||
|
#else
|
||||||
|
#define PRINT_DEBUG(x)
|
||||||
|
#define PRINT_DEBUG_HEX16(x)
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#define SMBUS_DELAY() inb(0x80)
|
||||||
|
|
||||||
|
static void smbus_print_error(u8 host_status, int loops)
|
||||||
|
{
|
||||||
|
/* Check if there actually was an error. */
|
||||||
|
if (host_status == 0x00 || host_status == 0x40 ||
|
||||||
|
host_status == 0x42)
|
||||||
|
return;
|
||||||
|
|
||||||
|
if (loops >= SMBUS_TIMEOUT)
|
||||||
|
print_err("SMBus timeout\r\n");
|
||||||
|
if (host_status & (1 << 4))
|
||||||
|
print_err("Interrupt/SMI# was Failed Bus Transaction\r\n");
|
||||||
|
if (host_status & (1 << 3))
|
||||||
|
print_err("Bus error\r\n");
|
||||||
|
if (host_status & (1 << 2))
|
||||||
|
print_err("Device error\r\n");
|
||||||
|
if (host_status & (1 << 1))
|
||||||
|
print_err("Interrupt/SMI# was Successful Completion\r\n");
|
||||||
|
if (host_status & (1 << 0))
|
||||||
|
print_err("Host busy\r\n");
|
||||||
|
}
|
||||||
|
|
||||||
|
static void smbus_wait_until_ready(void)
|
||||||
|
{
|
||||||
|
int loops;
|
||||||
|
|
||||||
|
PRINT_DEBUG("Waiting until SMBus ready\r\n");
|
||||||
|
|
||||||
|
loops = 0;
|
||||||
|
/* Yes, this is a mess, but it's the easiest way to do it. */
|
||||||
|
while ((inb(SMBHSTSTAT) & 1) == 1 && loops <= SMBUS_TIMEOUT)
|
||||||
|
++loops;
|
||||||
|
smbus_print_error(inb(SMBHSTSTAT), loops);
|
||||||
|
}
|
||||||
|
|
||||||
|
static void smbus_reset(void)
|
||||||
|
{
|
||||||
|
outb(HOST_RESET, SMBHSTSTAT);
|
||||||
|
/* Datasheet says we have to read it to take ownership of SMBus. */
|
||||||
|
inb(SMBHSTSTAT);
|
||||||
|
|
||||||
|
PRINT_DEBUG("After reset status: ");
|
||||||
|
PRINT_DEBUG_HEX16(inb(SMBHSTSTAT));
|
||||||
|
PRINT_DEBUG("\r\n");
|
||||||
|
}
|
||||||
|
|
||||||
|
u8 smbus_read_byte(u32 dimm, u32 offset)
|
||||||
|
{
|
||||||
|
u32 val;
|
||||||
|
|
||||||
|
PRINT_DEBUG("DIMM ");
|
||||||
|
PRINT_DEBUG_HEX16(dimm);
|
||||||
|
PRINT_DEBUG(" OFFSET ");
|
||||||
|
PRINT_DEBUG_HEX16(offset);
|
||||||
|
PRINT_DEBUG("\r\n");
|
||||||
|
|
||||||
|
smbus_reset();
|
||||||
|
/* Clear host data port. */
|
||||||
|
outb(0x00, SMBHSTDAT0);
|
||||||
|
SMBUS_DELAY();
|
||||||
|
smbus_wait_until_ready();
|
||||||
|
|
||||||
|
/* Actual addr to reg format. */
|
||||||
|
dimm = (dimm << 1);
|
||||||
|
dimm |= 1;
|
||||||
|
outb(dimm, SMBXMITADD);
|
||||||
|
outb(offset, SMBHSTCMD);
|
||||||
|
/* Start transaction, byte data read. */
|
||||||
|
outb(0x48, SMBHSTCTL);
|
||||||
|
|
||||||
|
SMBUS_DELAY();
|
||||||
|
|
||||||
|
smbus_wait_until_ready();
|
||||||
|
|
||||||
|
val = inb(SMBHSTDAT0);
|
||||||
|
PRINT_DEBUG("Read: ");
|
||||||
|
PRINT_DEBUG_HEX16(val);
|
||||||
|
PRINT_DEBUG("\r\n");
|
||||||
|
|
||||||
|
/* Probably don't have to do this, but it can't hurt. */
|
||||||
|
smbus_reset();
|
||||||
|
|
||||||
|
/* Can I just "return inb(SMBHSTDAT0)"? */
|
||||||
|
return val;
|
||||||
|
}
|
||||||
|
|
||||||
|
void enable_smbus(void)
|
||||||
|
{
|
||||||
|
device_t dev;
|
||||||
|
|
||||||
|
/* Power management controller */
|
||||||
|
dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA,
|
||||||
|
PCI_DEVICE_ID_VIA_VT8237R_LPC), 0);
|
||||||
|
|
||||||
|
if (dev == PCI_DEV_INVALID)
|
||||||
|
die("Power Management Controller not found\r\n");
|
||||||
|
|
||||||
|
/* 7 = SMBus Clock from RTC 32.768KHz
|
||||||
|
* 5 = Internal PLL reset from susp
|
||||||
|
*/
|
||||||
|
pci_write_config8(dev, VT8237R_POWER_WELL, 0xa0);
|
||||||
|
|
||||||
|
/* Enable SMBus */
|
||||||
|
pci_write_config16(dev, VT8237R_SMBUS_IO_BASE_REG,
|
||||||
|
VT8237R_SMBUS_IO_BASE | 0x1);
|
||||||
|
|
||||||
|
/* SMBus Host Configuration, enable */
|
||||||
|
pci_write_config8(dev, VT8237R_SMBUS_HOST_CONF, 0x01);
|
||||||
|
|
||||||
|
/* Make it work for I/O. */
|
||||||
|
pci_write_config16(dev, PCI_COMMAND, PCI_COMMAND_IO);
|
||||||
|
|
||||||
|
smbus_reset();
|
||||||
|
|
||||||
|
/* Reset the internal pointer. */
|
||||||
|
inb(SMBHSTCTL);
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,116 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the LinuxBIOS project.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz>
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License v2 as published by
|
||||||
|
* the Free Software Foundation.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program; if not, write to the Free Software
|
||||||
|
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* Based on other VIA SB code. */
|
||||||
|
|
||||||
|
#include <device/device.h>
|
||||||
|
#include <device/pci.h>
|
||||||
|
#include <device/pci_ops.h>
|
||||||
|
#include <device/pci_ids.h>
|
||||||
|
#include <console/console.h>
|
||||||
|
#include "vt8237r.h"
|
||||||
|
#include "chip.h"
|
||||||
|
|
||||||
|
#define IDE_CS 0x40
|
||||||
|
#define IDE_CONF_I 0x41
|
||||||
|
#define IDE_CONF_II 0x42
|
||||||
|
#define IDE_CONF_FIFO 0x43
|
||||||
|
#define IDE_MISC_I 0x44
|
||||||
|
#define IDE_MISC_II 0x45
|
||||||
|
#define IDE_UDMA 0x50
|
||||||
|
|
||||||
|
/**
|
||||||
|
* No native mode. Interrupts from unconnected HDDs might occur if
|
||||||
|
* IRQ14/15 is used for PCI. Therefore no native mode support.
|
||||||
|
*/
|
||||||
|
static void ide_init(struct device *dev)
|
||||||
|
{
|
||||||
|
struct southbridge_via_vt8237r_config *sb =
|
||||||
|
(struct southbridge_via_vt8237r_config *) dev->chip_info;
|
||||||
|
|
||||||
|
u8 enables;
|
||||||
|
u32 cablesel;
|
||||||
|
|
||||||
|
printk_info("%s IDE interface %s\n", "Primary",
|
||||||
|
sb->ide0_enable ? "enabled" : "disabled");
|
||||||
|
printk_info("%s IDE interface %s\n", "Secondary",
|
||||||
|
sb->ide1_enable ? "enabled" : "disabled");
|
||||||
|
enables = pci_read_config8(dev, IDE_CS) & ~0x3;
|
||||||
|
enables |= (sb->ide0_enable << 1) | sb->ide1_enable;
|
||||||
|
pci_write_config8(dev, IDE_CS, enables);
|
||||||
|
enables = pci_read_config8(dev, IDE_CS);
|
||||||
|
printk_debug("Enables in reg 0x40 read back as 0x%x\n", enables);
|
||||||
|
|
||||||
|
/* Enable only compatibility mode. */
|
||||||
|
enables = pci_read_config8(dev, IDE_CONF_II);
|
||||||
|
enables &= ~0xc0;
|
||||||
|
pci_write_config8(dev,IDE_CONF_II, enables);
|
||||||
|
enables = pci_read_config8(dev, IDE_CONF_II);
|
||||||
|
printk_debug("Enables in reg 0x42 read back as 0x%x\n", enables);
|
||||||
|
|
||||||
|
/* Enable prefetch buffers. */
|
||||||
|
enables = pci_read_config8(dev, IDE_CONF_I);
|
||||||
|
enables |= 0xf0;
|
||||||
|
pci_write_config8(dev, IDE_CONF_I, enables);
|
||||||
|
|
||||||
|
/* Flush FIFOs at half. */
|
||||||
|
enables = pci_read_config8(dev, IDE_CONF_FIFO);
|
||||||
|
enables &= 0xf0;
|
||||||
|
enables |= (1 << 2) | (1 << 0);
|
||||||
|
pci_write_config8(dev, IDE_CONF_FIFO, enables);
|
||||||
|
|
||||||
|
/* PIO read prefetch counter, Bus Master IDE Status Reg. Read Retry. */
|
||||||
|
enables = pci_read_config8(dev, IDE_MISC_I);
|
||||||
|
enables &= 0xe2;
|
||||||
|
enables |= (1 << 4) | (1 << 3);
|
||||||
|
pci_write_config8(dev, IDE_MISC_I, enables);
|
||||||
|
|
||||||
|
/* Use memory read multiple, Memory-Write-and-Invalidate. */
|
||||||
|
enables = pci_read_config8(dev, IDE_MISC_II);
|
||||||
|
enables |= (1 << 2) | (1 << 3);
|
||||||
|
pci_write_config8(dev, IDE_MISC_II, enables);
|
||||||
|
|
||||||
|
/* Force interrupts to use compat mode. */
|
||||||
|
pci_write_config8(dev, PCI_INTERRUPT_PIN, 0x0);
|
||||||
|
pci_write_config8(dev, PCI_INTERRUPT_LINE, 0xff);
|
||||||
|
|
||||||
|
/* Cable guy... */
|
||||||
|
cablesel = pci_read_config32(dev, IDE_UDMA);
|
||||||
|
cablesel &= ~((1 << 28) | (1 << 20) | (1 <<12) | (1 << 4));
|
||||||
|
cablesel |= (sb->ide0_80pin_cable << 28) |
|
||||||
|
(sb->ide0_80pin_cable << 20) |
|
||||||
|
(sb->ide1_80pin_cable << 12) |
|
||||||
|
(sb->ide1_80pin_cable << 4);
|
||||||
|
pci_write_config32(dev, IDE_UDMA, cablesel);
|
||||||
|
}
|
||||||
|
|
||||||
|
static struct device_operations ide_ops = {
|
||||||
|
.read_resources = pci_dev_read_resources,
|
||||||
|
.set_resources = pci_dev_set_resources,
|
||||||
|
.enable_resources = pci_dev_enable_resources,
|
||||||
|
.init = ide_init,
|
||||||
|
.enable = 0,
|
||||||
|
.ops_pci = 0,
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct pci_driver northbridge_driver __pci_driver = {
|
||||||
|
.ops = &ide_ops,
|
||||||
|
.vendor = PCI_VENDOR_ID_VIA,
|
||||||
|
.device = PCI_DEVICE_ID_VIA_82C586_1,
|
||||||
|
};
|
||||||
|
|
@ -0,0 +1,350 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the LinuxBIOS project.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz>
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License v2 as published by
|
||||||
|
* the Free Software Foundation.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program; if not, write to the Free Software
|
||||||
|
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* Inspiration from other VIA SB code. */
|
||||||
|
|
||||||
|
#include <arch/io.h>
|
||||||
|
#include <console/console.h>
|
||||||
|
#include <device/device.h>
|
||||||
|
#include <device/pci.h>
|
||||||
|
#include <device/pci_ops.h>
|
||||||
|
#include <device/pci_ids.h>
|
||||||
|
#include <pc80/mc146818rtc.h>
|
||||||
|
#include <cpu/x86/lapic.h>
|
||||||
|
#include <stdlib.h>
|
||||||
|
#include "vt8237r.h"
|
||||||
|
#include "chip.h"
|
||||||
|
|
||||||
|
#define ALL (0xff << 24)
|
||||||
|
#define NONE (0)
|
||||||
|
#define DISABLED (1 << 16)
|
||||||
|
#define ENABLED (0 << 16)
|
||||||
|
#define TRIGGER_EDGE (0 << 15)
|
||||||
|
#define TRIGGER_LEVEL (1 << 15)
|
||||||
|
#define POLARITY_HIGH (0 << 13)
|
||||||
|
#define POLARITY_LOW (1 << 13)
|
||||||
|
#define PHYSICAL_DEST (0 << 11)
|
||||||
|
#define LOGICAL_DEST (1 << 11)
|
||||||
|
#define ExtINT (7 << 8)
|
||||||
|
#define NMI (4 << 8)
|
||||||
|
#define SMI (2 << 8)
|
||||||
|
#define INT (1 << 8)
|
||||||
|
|
||||||
|
extern void dump_south(device_t dev);
|
||||||
|
|
||||||
|
struct ioapicreg {
|
||||||
|
u32 reg;
|
||||||
|
u32 value_low;
|
||||||
|
u32 value_high;
|
||||||
|
} ioapic_table[] = {
|
||||||
|
/* IO-APIC virtual wire mode configuration. */
|
||||||
|
/* mask, trigger, polarity, destination, delivery, vector */
|
||||||
|
{0, ENABLED | TRIGGER_EDGE | POLARITY_HIGH | PHYSICAL_DEST |
|
||||||
|
ExtINT, NONE},
|
||||||
|
{1, DISABLED, NONE},
|
||||||
|
{2, DISABLED, NONE},
|
||||||
|
{3, DISABLED, NONE},
|
||||||
|
{4, DISABLED, NONE},
|
||||||
|
{5, DISABLED, NONE},
|
||||||
|
{6, DISABLED, NONE},
|
||||||
|
{7, DISABLED, NONE},
|
||||||
|
{8, DISABLED, NONE},
|
||||||
|
{9, DISABLED, NONE},
|
||||||
|
{10, DISABLED, NONE},
|
||||||
|
{11, DISABLED, NONE},
|
||||||
|
{12, DISABLED, NONE},
|
||||||
|
{13, DISABLED, NONE},
|
||||||
|
{14, DISABLED, NONE},
|
||||||
|
{15, DISABLED, NONE},
|
||||||
|
{16, DISABLED, NONE},
|
||||||
|
{17, DISABLED, NONE},
|
||||||
|
{18, DISABLED, NONE},
|
||||||
|
{19, DISABLED, NONE},
|
||||||
|
{20, DISABLED, NONE},
|
||||||
|
{21, DISABLED, NONE},
|
||||||
|
{22, DISABLED, NONE},
|
||||||
|
{23, DISABLED, NONE},
|
||||||
|
};
|
||||||
|
|
||||||
|
static void setup_ioapic(u32 ioapic_base)
|
||||||
|
{
|
||||||
|
u32 value_low, value_high, val;
|
||||||
|
volatile u32 *l;
|
||||||
|
int i;
|
||||||
|
|
||||||
|
/* All delivered to CPU0. */
|
||||||
|
ioapic_table[0].value_high = (lapicid()) << (56 - 32);
|
||||||
|
l = (unsigned long *) ioapic_base;
|
||||||
|
|
||||||
|
/* Set APIC to FSB message bus. */
|
||||||
|
l[0] = 0x3;
|
||||||
|
val = l[4];
|
||||||
|
l[4] = (val & 0xFFFFFE) | 1;
|
||||||
|
|
||||||
|
/* Set APIC ADDR - this will be VT8237R_APIC_ID. */
|
||||||
|
l[0] = 0;
|
||||||
|
val = l[4];
|
||||||
|
l[4] = (val & 0xF0FFFF) | (VT8237R_APIC_ID << 24);
|
||||||
|
|
||||||
|
for (i = 0; i < ARRAY_SIZE(ioapic_table); i++) {
|
||||||
|
l[0] = (ioapic_table[i].reg * 2) + 0x10;
|
||||||
|
l[4] = ioapic_table[i].value_low;
|
||||||
|
value_low = l[4];
|
||||||
|
l[0] = (ioapic_table[i].reg * 2) + 0x11;
|
||||||
|
l[4] = ioapic_table[i].value_high;
|
||||||
|
value_high = l[4];
|
||||||
|
|
||||||
|
if ((i == 0) && (value_low == 0xffffffff)) {
|
||||||
|
printk_warning("IO APIC not responding.\n");
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
/** Set up PCI IRQ routing, route everything through APIC. */
|
||||||
|
static void pci_routing_fixup(struct device *dev)
|
||||||
|
{
|
||||||
|
/* PCI PNP Interrupt Routing INTE/F - disable */
|
||||||
|
pci_write_config8(dev, 0x44, 0x00);
|
||||||
|
|
||||||
|
/* PCI PNP Interrupt Routing INTG/H - disable */
|
||||||
|
pci_write_config8(dev, 0x45, 0x00);
|
||||||
|
|
||||||
|
/* Route INTE-INTH through registers above, no map to INTA-INTD. */
|
||||||
|
pci_write_config8(dev, 0x46, 0x10);
|
||||||
|
|
||||||
|
/* PCI Interrupt Polarity */
|
||||||
|
pci_write_config8(dev, 0x54, 0x00);
|
||||||
|
|
||||||
|
/* PCI INTA# Routing */
|
||||||
|
pci_write_config8(dev, 0x55, 0x00);
|
||||||
|
|
||||||
|
/* PCI INTB#/C# Routing */
|
||||||
|
pci_write_config8(dev, 0x56, 0x00);
|
||||||
|
|
||||||
|
/* PCI INTD# Routing */
|
||||||
|
pci_write_config8(dev, 0x57, 0x00);
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* Set up the power management capabilities directly into ACPI mode.
|
||||||
|
* This avoids having to handle any System Management Interrupts (SMIs).
|
||||||
|
*/
|
||||||
|
void setup_pm(device_t dev)
|
||||||
|
{
|
||||||
|
/* Debounce LID and PWRBTN# Inputs for 16ms. */
|
||||||
|
pci_write_config8(dev, 0x80, 0x20);
|
||||||
|
|
||||||
|
/* Set ACPI base address to I/O VT8237R_ACPI_IO_BASE. */
|
||||||
|
pci_write_config16(dev, 0x88, VT8237R_ACPI_IO_BASE | 0x1);
|
||||||
|
|
||||||
|
/* Set ACPI to 9, must set IRQ 9 override to level! Set PSON gating. */
|
||||||
|
pci_write_config8(dev, 0x82, 0x40 | VT8237R_ACPI_IRQ);
|
||||||
|
|
||||||
|
/* Primary interupt channel, define wake events 0=IRQ0 15=IRQ15 1=en. */
|
||||||
|
pci_write_config16(dev, 0x84, 0x30b2);
|
||||||
|
|
||||||
|
/* SMI output level to low, 7.5us throttle clock */
|
||||||
|
pci_write_config8(dev, 0x8d, 0x18);
|
||||||
|
|
||||||
|
/* GP Timer Control 1s */
|
||||||
|
pci_write_config8(dev, 0x93, 0x88);
|
||||||
|
|
||||||
|
/* 7 = SMBus clock from RTC 32.768KHz
|
||||||
|
* 5 = Internal PLL reset from susp
|
||||||
|
* 2 = GPO2 is GPIO
|
||||||
|
*/
|
||||||
|
pci_write_config8(dev, 0x94, 0xa4);
|
||||||
|
|
||||||
|
/* 7 = stp to sust delay 1msec
|
||||||
|
* 6 = SUSST# Deasserted Before PWRGD for STD
|
||||||
|
* 3 = GPO26/GPO27 is GPO
|
||||||
|
* 2 = Disable Alert on Lan
|
||||||
|
*/
|
||||||
|
pci_write_config8(dev, 0x95, 0xcc);
|
||||||
|
|
||||||
|
/* Disable GP3 timer. */
|
||||||
|
pci_write_config8(dev, 0x98, 0);
|
||||||
|
|
||||||
|
/* Enable SATA LED, disable special CPU Frequency Change -
|
||||||
|
* GPIO28 GPIO22 GPIO29 GPIO23 are GPIOs.
|
||||||
|
*/
|
||||||
|
pci_write_config8(dev, 0xe5, 0x9);
|
||||||
|
|
||||||
|
/* REQ5 as PCI request input - should be together with INTE-INTH. */
|
||||||
|
pci_write_config8(dev, 0xe4, 0x4);
|
||||||
|
|
||||||
|
/* Enable ACPI accessm RTC signal gated with PSON. */
|
||||||
|
pci_write_config8(dev, 0x81, 0x84);
|
||||||
|
|
||||||
|
/* Clear status events. */
|
||||||
|
outw(0xffff, VT8237R_ACPI_IO_BASE + 0x00);
|
||||||
|
outw(0xffff, VT8237R_ACPI_IO_BASE + 0x20);
|
||||||
|
outw(0xffff, VT8237R_ACPI_IO_BASE + 0x28);
|
||||||
|
outl(0xffffffff, VT8237R_ACPI_IO_BASE + 0x30);
|
||||||
|
|
||||||
|
/* Disable SCI on GPIO. */
|
||||||
|
outw(0x0, VT8237R_ACPI_IO_BASE + 0x22);
|
||||||
|
|
||||||
|
/* Disable SMI on GPIO. */
|
||||||
|
outw(0x0, VT8237R_ACPI_IO_BASE + 0x24);
|
||||||
|
|
||||||
|
/* Disable all global enable SMIs. */
|
||||||
|
outw(0x0, VT8237R_ACPI_IO_BASE + 0x2a);
|
||||||
|
|
||||||
|
/* All SMI off, both IDE buses ON, PSON rising edge. */
|
||||||
|
outw(0x0, VT8237R_ACPI_IO_BASE + 0x2c);
|
||||||
|
|
||||||
|
/* Primary activity SMI disable. */
|
||||||
|
outl(0x0, VT8237R_ACPI_IO_BASE + 0x34);
|
||||||
|
|
||||||
|
/* GP timer reload on none. */
|
||||||
|
outl(0x0, VT8237R_ACPI_IO_BASE + 0x38);
|
||||||
|
|
||||||
|
/* Disable extended IO traps. */
|
||||||
|
outb(0x0, VT8237R_ACPI_IO_BASE + 0x42);
|
||||||
|
|
||||||
|
/* SCI is generated for RTC/pwrBtn/slpBtn. */
|
||||||
|
outw(0x001, VT8237R_ACPI_IO_BASE + 0x04);
|
||||||
|
}
|
||||||
|
|
||||||
|
static void vt8237r_init(struct device *dev)
|
||||||
|
{
|
||||||
|
u8 enables, byte;
|
||||||
|
|
||||||
|
/* Enable addr/data stepping. */
|
||||||
|
byte = pci_read_config8(dev, PCI_COMMAND);
|
||||||
|
byte |= PCI_COMMAND_WAIT;
|
||||||
|
pci_write_config8(dev, PCI_COMMAND, byte);
|
||||||
|
|
||||||
|
/* Enable the internal I/O decode. */
|
||||||
|
enables = pci_read_config8(dev, 0x6C);
|
||||||
|
enables |= 0x80;
|
||||||
|
pci_write_config8(dev, 0x6C, enables);
|
||||||
|
|
||||||
|
/* FIXME: Map 4MB of flash into the address space,
|
||||||
|
* this should be in CAR call.
|
||||||
|
*/
|
||||||
|
/* pci_write_config8(dev, 0x41, 0x7f); */
|
||||||
|
|
||||||
|
/* Set bit 6 of 0x40 (I/O recovery time).
|
||||||
|
* IMPORTANT FIX - EISA = ECLR reg at 0x4d0! Decoding must be on so
|
||||||
|
* that PCI interrupts can be properly marked as level triggered.
|
||||||
|
*/
|
||||||
|
enables = pci_read_config8(dev, 0x40);
|
||||||
|
enables |= 0x44;
|
||||||
|
pci_write_config8(dev, 0x40, enables);
|
||||||
|
|
||||||
|
/* Line buffer control */
|
||||||
|
enables = pci_read_config8(dev, 0x42);
|
||||||
|
enables |= 0xf8;
|
||||||
|
pci_write_config8(dev, 0x42, enables);
|
||||||
|
|
||||||
|
/* Delay transaction control */
|
||||||
|
pci_write_config8(dev, 0x43, 0xb);
|
||||||
|
|
||||||
|
/* I/O recovery time */
|
||||||
|
pci_write_config8(dev, 0x4c, 0x44);
|
||||||
|
|
||||||
|
/* ROM memory cycles go to LPC. */
|
||||||
|
pci_write_config8(dev, 0x59, 0x80);
|
||||||
|
|
||||||
|
/* Bypass APIC De-Assert Message, INTE#, INTF#, INTG#, INTH# as PCI. */
|
||||||
|
pci_write_config8(dev, 0x5B, 0xb);
|
||||||
|
|
||||||
|
/* Set Read Pass Write Control Enable (force A2 from APIC FSB to low). */
|
||||||
|
pci_write_config8(dev, 0x48, 0x8c);
|
||||||
|
|
||||||
|
/* Set 0x58 to 0x43 APIC and RTC. */
|
||||||
|
pci_write_config8(dev, 0x58, 0x43);
|
||||||
|
|
||||||
|
/* Set bit 3 of 0x4f (use INIT# as CPU reset). */
|
||||||
|
enables = pci_read_config8(dev, 0x4f);
|
||||||
|
enables |= 0x08;
|
||||||
|
pci_write_config8(dev, 0x4f, enables);
|
||||||
|
|
||||||
|
/* Enable serial IRQ, 6PCI clocks. */
|
||||||
|
pci_write_config8(dev, 0x52, 0x9);
|
||||||
|
|
||||||
|
/* Enable HPET at VT8237R_HPET_ADDR. */
|
||||||
|
pci_write_config32(dev, 0x68, (VT8237R_HPET_ADDR | 0x80));
|
||||||
|
|
||||||
|
/* Power management setup */
|
||||||
|
setup_pm(dev);
|
||||||
|
|
||||||
|
/* Start the RTC. */
|
||||||
|
rtc_init(0);
|
||||||
|
}
|
||||||
|
|
||||||
|
void vt8237r_read_resources(device_t dev)
|
||||||
|
{
|
||||||
|
struct resource *res;
|
||||||
|
|
||||||
|
pci_dev_read_resources(dev);
|
||||||
|
/* Fixed APIC resource */
|
||||||
|
res = new_resource(dev, 0x44);
|
||||||
|
res->base = VT8237R_APIC_BASE;
|
||||||
|
res->size = 256;
|
||||||
|
res->limit = res->base + res->size - 1;
|
||||||
|
res->align = 8;
|
||||||
|
res->gran = 8;
|
||||||
|
res->flags = IORESOURCE_MEM | IORESOURCE_FIXED |
|
||||||
|
IORESOURCE_STORED | IORESOURCE_ASSIGNED;
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* The VT8237R is not a PCI bridge and has no resources of its own (other
|
||||||
|
* than standard PC I/O addresses), however it does control the ISA bus
|
||||||
|
* and so we need to manually call enable childrens resources on that bus.
|
||||||
|
*/
|
||||||
|
void vt8237r_enable_resources(device_t dev)
|
||||||
|
{
|
||||||
|
pci_dev_enable_resources(dev);
|
||||||
|
enable_childrens_resources(dev);
|
||||||
|
}
|
||||||
|
|
||||||
|
static void init_keyboard(struct device *dev)
|
||||||
|
{
|
||||||
|
u8 regval = pci_read_config8(dev, 0x51);
|
||||||
|
if (regval & 0x1)
|
||||||
|
init_pc_keyboard(0x60, 0x64, 0);
|
||||||
|
}
|
||||||
|
|
||||||
|
static void southbridge_init(struct device *dev)
|
||||||
|
{
|
||||||
|
vt8237r_init(dev);
|
||||||
|
pci_routing_fixup(dev);
|
||||||
|
setup_ioapic(VT8237R_APIC_BASE);
|
||||||
|
setup_i8259();
|
||||||
|
init_keyboard(dev);
|
||||||
|
}
|
||||||
|
|
||||||
|
static struct device_operations vt8237r_lpc_ops = {
|
||||||
|
.read_resources = vt8237r_read_resources,
|
||||||
|
.set_resources = pci_dev_set_resources,
|
||||||
|
.enable_resources = vt8237r_enable_resources,
|
||||||
|
.init = &southbridge_init,
|
||||||
|
.scan_bus = scan_static_bus,
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct pci_driver lpc_driver __pci_driver = {
|
||||||
|
.ops = &vt8237r_lpc_ops,
|
||||||
|
.vendor = PCI_VENDOR_ID_VIA,
|
||||||
|
.device = PCI_DEVICE_ID_VIA_VT8237R_LPC,
|
||||||
|
};
|
||||||
|
|
@ -0,0 +1,58 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the LinuxBIOS project.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz>
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License v2 as published by
|
||||||
|
* the Free Software Foundation.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program; if not, write to the Free Software
|
||||||
|
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <console/console.h>
|
||||||
|
#include <device/device.h>
|
||||||
|
#include <device/pci.h>
|
||||||
|
#include <device/pci_ops.h>
|
||||||
|
#include <device/pci_ids.h>
|
||||||
|
|
||||||
|
#define SATA_MISC_CTRL 0x45
|
||||||
|
|
||||||
|
static void sata_init(struct device *dev)
|
||||||
|
{
|
||||||
|
u8 reg;
|
||||||
|
|
||||||
|
printk_debug("Configuring VIA SATA controller\n");
|
||||||
|
|
||||||
|
/* Class IDE Disk */
|
||||||
|
reg = pci_read_config8(dev, SATA_MISC_CTRL);
|
||||||
|
reg &= 0x7f; /* Sub Class Write Protect off */
|
||||||
|
pci_write_config8(dev, SATA_MISC_CTRL, reg);
|
||||||
|
|
||||||
|
/* Change the device class to SATA from RAID. */
|
||||||
|
pci_write_config8(dev, PCI_CLASS_DEVICE, 0x1);
|
||||||
|
reg |= 0x80; /* Sub Class Write Protect on */
|
||||||
|
pci_write_config8(dev, SATA_MISC_CTRL, reg);
|
||||||
|
}
|
||||||
|
|
||||||
|
static struct device_operations sata_ops = {
|
||||||
|
.read_resources = pci_dev_read_resources,
|
||||||
|
.set_resources = pci_dev_set_resources,
|
||||||
|
.enable_resources = pci_dev_enable_resources,
|
||||||
|
.init = sata_init,
|
||||||
|
.enable = 0,
|
||||||
|
.ops_pci = 0,
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct pci_driver northbridge_driver __pci_driver = {
|
||||||
|
.ops = &sata_ops,
|
||||||
|
.vendor = PCI_VENDOR_ID_VIA,
|
||||||
|
.device = PCI_DEVICE_ID_VIA_VT6420_SATA,
|
||||||
|
};
|
||||||
Loading…
Reference in New Issue