mb/google/brya/var/kano: Enable CsPiStartHighinEct for Hynix memory

According to Intel doc#763797 to overcome early command training hang
issue, the CsPiStartHighinEct needs to be enabled for hynix memory.

BUG=b:281643325
BRANCH=firmware-brya-14505.B
TEST=Built and booted into OS.

Change-Id: I95702e675fa3b73c7e8ee0c8625c7828d8129ea8
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76355
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This commit is contained in:
David Wu 2023-06-26 09:11:33 +08:00 committed by Nick Vaccaro
parent caa8a20d87
commit 41b92fef81
2 changed files with 146 additions and 0 deletions

View File

@ -2,6 +2,7 @@
bootblock-y += gpio.c
romstage-y += gpio.c
romstage-y += memory.c
ramstage-y += gpio.c
ramstage-$(CONFIG_FW_CONFIG) += variant.c

View File

@ -0,0 +1,145 @@
/* SPDX-License-Identifier: GPL-2.0-or-later */
#include <baseboard/variants.h>
#include <memory_info.h>
#include <string.h>
static const struct mb_cfg kano_memcfg = {
.type = MEM_TYPE_LP4X,
.rcomp = {
/* Baseboard uses only 100ohm Rcomp resistors */
.resistor = 100,
/* Baseboard Rcomp target values */
.targets = {40, 30, 30, 30, 30},
},
/* DQ byte map */
.lpx_dq_map = {
.ddr0 = {
.dq0 = { 3, 0, 2, 1, 4, 6, 5, 7, },
.dq1 = { 12, 13, 14, 15, 8, 9, 10, 11, },
},
.ddr1 = {
.dq0 = { 13, 14, 11, 12, 10, 8, 15, 9, },
.dq1 = { 5, 2, 4, 3, 1, 6, 0, 7, },
},
.ddr2 = {
.dq0 = { 2, 3, 1, 0, 7, 6, 5, 4, },
.dq1 = { 12, 13, 14, 15, 8, 9, 10, 11, },
},
.ddr3 = {
.dq0 = { 13, 14, 12, 15, 11, 9, 8, 10, },
.dq1 = { 5, 2, 1, 4, 7, 0, 3, 6, },
},
.ddr4 = {
.dq0 = { 11, 10, 8, 9, 14, 15, 13, 12, },
.dq1 = { 3, 0, 2, 1, 5, 4, 6, 7, },
},
.ddr5 = {
.dq0 = { 11, 15, 13, 12, 10, 9, 14, 8, },
.dq1 = { 3, 0, 2, 1, 6, 7, 5, 4, },
},
.ddr6 = {
.dq0 = { 11, 13, 10, 12, 15, 9, 14, 8, },
.dq1 = { 4, 3, 5, 2, 7, 0, 1, 6, },
},
.ddr7 = {
.dq0 = { 12, 13, 15, 14, 11, 9, 10, 8, },
.dq1 = { 4, 5, 1, 2, 6, 3, 0, 7, },
},
},
/* DQS CPU<>DRAM map */
.lpx_dqs_map = {
.ddr0 = { .dqs0 = 0, .dqs1 = 1 },
.ddr1 = { .dqs0 = 1, .dqs1 = 0 },
.ddr2 = { .dqs0 = 0, .dqs1 = 1 },
.ddr3 = { .dqs0 = 1, .dqs1 = 0 },
.ddr4 = { .dqs0 = 1, .dqs1 = 0 },
.ddr5 = { .dqs0 = 1, .dqs1 = 0 },
.ddr6 = { .dqs0 = 1, .dqs1 = 0 },
.ddr7 = { .dqs0 = 1, .dqs1 = 0 },
},
.ect = 1, /* Enable Early Command Training */
};
static const struct mb_cfg hynix_memcfg = {
.type = MEM_TYPE_LP4X,
.rcomp = {
/* Baseboard uses only 100ohm Rcomp resistors */
.resistor = 100,
/* Baseboard Rcomp target values */
.targets = {40, 30, 30, 30, 30},
},
/* DQ byte map */
.lpx_dq_map = {
.ddr0 = {
.dq0 = { 3, 0, 2, 1, 4, 6, 5, 7, },
.dq1 = { 12, 13, 14, 15, 8, 9, 10, 11, },
},
.ddr1 = {
.dq0 = { 13, 14, 11, 12, 10, 8, 15, 9, },
.dq1 = { 5, 2, 4, 3, 1, 6, 0, 7, },
},
.ddr2 = {
.dq0 = { 2, 3, 1, 0, 7, 6, 5, 4, },
.dq1 = { 12, 13, 14, 15, 8, 9, 10, 11, },
},
.ddr3 = {
.dq0 = { 13, 14, 12, 15, 11, 9, 8, 10, },
.dq1 = { 5, 2, 1, 4, 7, 0, 3, 6, },
},
.ddr4 = {
.dq0 = { 11, 10, 8, 9, 14, 15, 13, 12, },
.dq1 = { 3, 0, 2, 1, 5, 4, 6, 7, },
},
.ddr5 = {
.dq0 = { 11, 15, 13, 12, 10, 9, 14, 8, },
.dq1 = { 3, 0, 2, 1, 6, 7, 5, 4, },
},
.ddr6 = {
.dq0 = { 11, 13, 10, 12, 15, 9, 14, 8, },
.dq1 = { 4, 3, 5, 2, 7, 0, 1, 6, },
},
.ddr7 = {
.dq0 = { 12, 13, 15, 14, 11, 9, 10, 8, },
.dq1 = { 4, 5, 1, 2, 6, 3, 0, 7, },
},
},
/* DQS CPU<>DRAM map */
.lpx_dqs_map = {
.ddr0 = { .dqs0 = 0, .dqs1 = 1 },
.ddr1 = { .dqs0 = 1, .dqs1 = 0 },
.ddr2 = { .dqs0 = 0, .dqs1 = 1 },
.ddr3 = { .dqs0 = 1, .dqs1 = 0 },
.ddr4 = { .dqs0 = 1, .dqs1 = 0 },
.ddr5 = { .dqs0 = 1, .dqs1 = 0 },
.ddr6 = { .dqs0 = 1, .dqs1 = 0 },
.ddr7 = { .dqs0 = 1, .dqs1 = 0 },
},
.ect = 1, /* Enable Early Command Training */
.cs_pi_start_high_in_ect = 1,
};
const struct mb_cfg *variant_memory_params(void)
{
const char *part_num = mainboard_get_dram_part_num();
const char *hynix_mem1 = "H54G46CYRBX267";
const char *hynix_mem2 = "H54G56CYRBX247";
if (!strcmp(part_num, hynix_mem1) || !strcmp(part_num, hynix_mem2)) {
printk(BIOS_INFO, "Enable cs_pi_start_high_in_ect for Hynix memory\n");
return &hynix_memcfg;
} else {
return &kano_memcfg;
}
}