mb/google/octopus: Create Lick variant

Create new variant for Lick that is copied from phaser variant.
Remove unnecessary code, due to not support touchscreen and stylus.
Set to default_override_table.
Remove variant.c.

BUG=b:145181137
BRANCH=octopus
TEST=./util/abuild/abuild -p none -t google/octopus -x -a

Change-Id: If732d94194defb9f5ee9c847ee93dd58aef01174
Signed-off-by: Hash.Hung <hash1.hung@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37247
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Henry Sun <henrysun@google.com>
Reviewed-by: Marco Chen <marcochen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>

src/mainboard/google/octopus/Kconfig

@@ -63,6 +63,7 @@ config VARIANT_DIR
 	default "octopus" if BOARD_GOOGLE_OCTOPUS
 	default "garg" if BOARD_GOOGLE_GARG
 	default "dood" if BOARD_GOOGLE_DOOD
+	default "lick" if BOARD_GOOGLE_LICK
 
 config DEVICETREE
 	string
@@ -85,6 +86,7 @@ config MAINBOARD_PART_NUMBER
 	default "Octopus" if BOARD_GOOGLE_OCTOPUS
 	default "Garg" if BOARD_GOOGLE_GARG
 	default "Dood" if BOARD_GOOGLE_DOOD
+	default "Lick" if BOARD_GOOGLE_LICK
 
 config MAINBOARD_FAMILY
 	string

src/mainboard/google/octopus/Kconfig.name

@@ -17,6 +17,12 @@ config BOARD_GOOGLE_PHASER
 	select BOARD_GOOGLE_BASEBOARD_OCTOPUS
 	select NHLT_DA7219 if INCLUDE_NHLT_BLOBS
 
+config BOARD_GOOGLE_LICK
+	bool "->  Lick"
+	select BASEBOARD_OCTOPUS_LAPTOP
+	select BOARD_GOOGLE_BASEBOARD_OCTOPUS
+	select NHLT_DA7219 if INCLUDE_NHLT_BLOBS
+
 config BOARD_GOOGLE_FLEEX
 	bool "->  Fleex"
 	select BASEBOARD_OCTOPUS_LAPTOP

src/mainboard/google/octopus/variants/lick/Makefile.inc

@@ -0,0 +1,3 @@
+bootblock-y += gpio.c
+
+ramstage-y += gpio.c

src/mainboard/google/octopus/variants/lick/gpio.c

@@ -0,0 +1,52 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2019 Google LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the
+ * GNU General Public License for more details.
+ */
+
+#include <baseboard/gpio.h>
+#include <baseboard/variants.h>
+#include <boardid.h>
+#include <gpio.h>
+#include <soc/gpio.h>
+#include <ec/google/chromeec/ec.h>
+
+#define SKU_UNKNOWN            0xFFFFFFFF
+
+static const struct pad_config default_override_table[] = {
+       /* disable I2C7 SCL and SDA */
+	PAD_NC(GPIO_114, UP_20K),     /* LPSS_I2C7_SDA */
+	PAD_NC(GPIO_115, UP_20K),     /* LPSS_I2C7_SCL */
+
+	PAD_NC(GPIO_52, UP_20K),
+	PAD_NC(GPIO_53, UP_20K),
+	PAD_NC(GPIO_67, UP_20K),
+	PAD_NC(GPIO_117, UP_20K),
+	PAD_NC(GPIO_143, UP_20K),
+
+	/* EN_PP3300_TOUCHSCREEN */
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_146, 0, DEEP, NONE, Tx0RxDCRx0, DISPUPD),
+
+	PAD_NC(GPIO_161, DN_20K),
+
+	/* EN_PP3300_WLAN_L */
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_178, 0, DEEP, NONE, Tx0RxDCRx0, DISPUPD),
+
+	PAD_NC(GPIO_213, DN_20K),
+	PAD_NC(GPIO_214, DN_20K),
+};
+
+const struct pad_config *variant_override_gpio_table(size_t *num)
+{
+	*num = ARRAY_SIZE(default_override_table);
+	return default_override_table;
+}

src/mainboard/google/octopus/variants/lick/include/variant/acpi/dptf.asl

@@ -0,0 +1,16 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2019 Google LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <baseboard/acpi/dptf.asl>

src/mainboard/google/octopus/variants/lick/include/variant/ec.h

@@ -0,0 +1,21 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2019 Google LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef MAINBOARD_EC_H
+#define MAINBOARD_EC_H
+
+#include <baseboard/ec.h>
+
+#endif

src/mainboard/google/octopus/variants/lick/include/variant/gpio.h

@@ -0,0 +1,21 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2019 Google LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef MAINBOARD_GPIO_H
+#define MAINBOARD_GPIO_H
+
+#include <baseboard/gpio.h>
+
+#endif /* MAINBOARD_GPIO_H */

src/mainboard/google/octopus/variants/lick/overridetree.cb

@@ -0,0 +1,113 @@
+chip soc/intel/apollolake
+
+	# EMMC Tx CMD Delay
+	# Refer to EDS-Vol2-16.32.
+	# [14:8] steps of delay for DDR mode, each 125ps.
+	# [6:0] steps of delay for SDR mode, each 125ps.
+	register "emmc_tx_cmd_cntl" = "0x505"
+
+	# EMMC TX DATA Delay 1
+	# Refer to EDS-Vol2-16.33.
+	# [14:8] steps of delay for HS400, each 125ps.
+	# [6:0] steps of delay for SDR104/HS200, each 125ps.
+	register "emmc_tx_data_cntl1" = "0x0b0c"
+
+	# EMMC TX DATA Delay 2
+	# Refer to EDS-Vol2-16.34.
+	# [30:24] steps of delay for SDR50, each 125ps.
+	# [22:16] steps of delay for DDR50, each 125ps.
+	# [14:8] steps of delay for SDR25/HS50, each 125ps.
+	# [6:0] steps of delay for SDR12, each 125ps.
+	register "emmc_tx_data_cntl2" = "0x1c282929"
+
+	# EMMC RX CMD/DATA Delay 1
+	# Refer to EDS-Vol2-16.35.
+	# [30:24] steps of delay for SDR50, each 125ps.
+	# [22:16] steps of delay for DDR50, each 125ps.
+	# [14:8] steps of delay for SDR25/HS50, each 125ps.
+	# [6:0] steps of delay for SDR12, each 125ps.
+	register "emmc_rx_cmd_data_cntl1" = "0x00181b1b"
+
+	# EMMC RX CMD/DATA Delay 2
+	# Refer to EDS-Vol2-16.37.
+	# [17:16] stands for Rx Clock before Output Buffer
+	# [14:8] steps of delay for Auto Tuning Mode, each 125ps.
+	# [6:0] steps of delay for HS200, each 125ps.
+	register "emmc_rx_cmd_data_cntl2" = "0x10028"
+
+	# EMMC Rx Strobe Delay
+	# Refer to EDS-Vol2-16.36.
+	# [14:8] Rx Strobe Delay DLL 1(HS400 Mode), each 125ps.
+	# [6:0] Rx Strobe Delay DLL 2(HS400 Mode), each 125ps.
+	register "emmc_rx_strobe_cntl" = "0x0b0b"
+
+	# Intel Common SoC Config
+	#+-------------------+---------------------------+
+	#| Field             |  Value                    |
+	#+-------------------+---------------------------+
+	#| GSPI0             | cr50 TPM. Early init is   |
+	#|                   | required to set up a BAR  |
+	#|                   | for TPM communication     |
+	#|                   | before memory is up       |
+	#| I2C5              | Audio                     |
+	#| I2C6              | Trackpad                  |
+	#+-------------------+---------------------------+
+	register "common_soc_config" = "{
+		.gspi[0] = {
+			.speed_mhz = 1,
+			.early_init = 1,
+		},
+		.i2c[5] = {
+			.speed = I2C_SPEED_FAST,
+			.rise_time_ns = 104,
+			.fall_time_ns = 52,
+		},
+		.i2c[6] = {
+			.speed = I2C_SPEED_FAST,
+			.rise_time_ns = 66,
+			.fall_time_ns = 90,
+			.data_hold_time_ns = 350,
+		},
+	}"
+
+	device domain 0 on
+		device pci 17.1 on
+			chip drivers/i2c/da7219
+				register "irq" = "ACPI_IRQ_LEVEL_LOW(GPIO_137_IRQ)"
+				register "btn_cfg" = "50"
+				register "mic_det_thr" = "500"
+				register "jack_ins_deb" = "20"
+				register "jack_det_rate" = ""32ms_64ms""
+				register "jack_rem_deb" = "1"
+				register "a_d_btn_thr" = "0xa"
+				register "d_b_btn_thr" = "0x16"
+				register "b_c_btn_thr" = "0x21"
+				register "c_mic_btn_thr" = "0x3e"
+				register "btn_avg" = "4"
+				register "adc_1bit_rpt" = "1"
+				register "micbias_lvl" = "2600"
+				register "mic_amp_in_sel" = ""diff""
+				device i2c 1a on end
+			end
+		end	# - I2C 5
+		device pci 17.2 on
+			chip drivers/i2c/generic
+				register "hid" = ""ELAN0000""
+				register "desc" = ""ELAN Touchpad""
+				register "irq" = "ACPI_IRQ_WAKE_EDGE_LOW(GPIO_135_IRQ)"
+				register "wake" = "GPE0_DW3_27"
+				register "probed" = "1"
+				device i2c 15 on end
+			end
+			chip drivers/i2c/hid
+				register "generic.hid" = ""PNP0C50""
+				register "generic.desc" = ""Synaptics Touchpad""
+				register "generic.irq" = "ACPI_IRQ_WAKE_EDGE_LOW(GPIO_135_IRQ)"
+				register "generic.wake" = "GPE0_DW3_27"
+				register "generic.probed" = "1"
+				register "hid_desc_reg_offset" = "0x20"
+				device i2c 0x2c on end
+			end
+		end	# - I2C 6
+	end
+end