mainboard/asus: Add F2A85-M PRO variant to F2A85-M.
Status: - The primary PCIe 16x slot works: It was tested with a GPU compatible with nouveau - USB and audio are not very reliable - The ethernet card is not seen with lspci - The secondary pcie16x slot isn't working: When plugging a GPU inside, it's not seen with lspci - SATA works: The board fully boots GNU/Linux - Serial doesn't work - Populating the RAM slots might have to follow the recommended memory configuration that is described in the mainboard manual in order to be able to boot. Note that when running the shutdown command, the default boot firmware will rewrite part of the boot flash before powering off the machine. Flashing coreboot internally from the default boot fimrware can still work, if the power plug is removed after running flashrom. Change-Id: I934de521d0acceb7770f23b2ae15c31a67ae73eb Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: https://review.coreboot.org/16931 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
This commit is contained in:
Denis 'GNUtoo' Carikli
Kyösti Mälkki
parent
d610c5823c
commit
420d3a93c1
|
|
@ -14,7 +14,7 @@
|
|||
# GNU General Public License for more details.
|
||||
#
|
||||
|
||||
if BOARD_ASUS_F2A85_M
|
||||
if BOARD_ASUS_F2A85_M || BOARD_ASUS_F2A85_M_PRO
|
||||
|
||||
config BOARD_SPECIFIC_OPTIONS # dummy
|
||||
def_bool y
|
||||
|
|
@ -25,7 +25,8 @@ config BOARD_SPECIFIC_OPTIONS # dummy
|
|||
select HAVE_PIRQ_TABLE
|
||||
select HAVE_MP_TABLE
|
||||
select HAVE_ACPI_TABLES
|
||||
select SUPERIO_ITE_IT8728F
|
||||
select SUPERIO_ITE_IT8728F if BOARD_ASUS_F2A85_M
|
||||
select SUPERIO_NUVOTON_NCT6779D if BOARD_ASUS_F2A85_M_PRO
|
||||
select BOARD_ROMSIZE_KB_8192
|
||||
select GFXUMA
|
||||
select HUDSON_DISABLE_IMC
|
||||
|
|
@ -60,7 +61,8 @@ config MAINBOARD_DIR
|
|||
|
||||
config MAINBOARD_PART_NUMBER
|
||||
string
|
||||
default "F2A85-M"
|
||||
default "F2A85-M" if BOARD_ASUS_F2A85_M
|
||||
default "F2A85-M_PRO" if BOARD_ASUS_F2A85_M_PRO
|
||||
|
||||
config HW_MEM_HOLE_SIZEK
|
||||
hex
|
||||
|
|
@ -102,4 +104,9 @@ config POST_IO
|
|||
bool
|
||||
default n
|
||||
|
||||
endif # BOARD_ASUS_F2A85_M
|
||||
config DEVICETREE
|
||||
string
|
||||
default "devicetree_f2a85-m_pro.cb" if BOARD_ASUS_F2A85_M_PRO
|
||||
default "devicetree_f2a85-m.cb" if BOARD_ASUS_F2A85_M
|
||||
|
||||
endif # BOARD_ASUS_F2A85_M || BOARD_ASUS_F2A85_M_PRO
|
||||
|
|
|
|||
|
|
@ -1,2 +1,5 @@
|
|||
config BOARD_ASUS_F2A85_M
|
||||
bool "F2A85-M"
|
||||
|
||||
config BOARD_ASUS_F2A85_M_PRO
|
||||
bool "F2A85-M PRO"
|
||||
|
|
|
|||
|
|
@ -225,6 +225,26 @@ CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = {
|
|||
*/
|
||||
PSO_END
|
||||
};
|
||||
#elif IS_ENABLED(CONFIG_BOARD_ASUS_F2A85_M_PRO)
|
||||
/*
|
||||
* Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA
|
||||
* (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable
|
||||
* is populated, AGESA will base its settings on the data from the table. Otherwise, it will
|
||||
* use its default conservative settings.
|
||||
*/
|
||||
CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = {
|
||||
|
||||
NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 2),
|
||||
NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 2),
|
||||
/*
|
||||
TODO: is this OK for DDR3 socket FM2?
|
||||
MEMCLK_DIS_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),
|
||||
CKE_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x05, 0x0A),
|
||||
ODT_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x00, 0x00),
|
||||
CS_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),
|
||||
*/
|
||||
PSO_END
|
||||
};
|
||||
#endif /* CONFIG_BOARD_ASUS_F2A85_M */
|
||||
|
||||
const struct OEM_HOOK OemCustomize = {
|
||||
|
|
|
|||
|
|
@ -46,6 +46,13 @@
|
|||
/* Bus 0, Dev 7 - PCIe Bridge for x1 PCIe Slot */
|
||||
/* Bus 0, Dev 8 - Southbridge port (normally hidden) */
|
||||
|
||||
#if CONFIG_BOARD_ASUS_F2A85_M_PRO
|
||||
Package(){0x000FFFFF, 0, INTA, 0 },
|
||||
Package(){0x000FFFFF, 1, INTB, 0 },
|
||||
Package(){0x000FFFFF, 2, INTC, 0 },
|
||||
Package(){0x000FFFFF, 3, INTD, 0 },
|
||||
#endif /* CONFIG_BOARD_ASUS_F2A85_M_PRO */
|
||||
|
||||
/* Bus 0, Dev 20 - F0:SMBus/ACPI,F1:IDE;F2:HDAudio;F3:LPC;F4:PCIBridge;F5:USB */
|
||||
Package(){0x0014FFFF, 0, INTA, 0 },
|
||||
Package(){0x0014FFFF, 1, INTB, 0 },
|
||||
|
|
|
|||
|
|
@ -0,0 +1,172 @@
|
|||
#
|
||||
# This file is part of the coreboot project.
|
||||
#
|
||||
# Copyright (C) 2012 Advanced Micro Devices, Inc.
|
||||
#
|
||||
# This program is free software; you can redistribute it and/or modify
|
||||
# it under the terms of the GNU General Public License as published by
|
||||
# the Free Software Foundation; version 2 of the License.
|
||||
#
|
||||
# This program is distributed in the hope that it will be useful,
|
||||
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
# GNU General Public License for more details.
|
||||
#
|
||||
chip northbridge/amd/agesa/family15tn/root_complex
|
||||
|
||||
device cpu_cluster 0 on
|
||||
chip cpu/amd/agesa/family15tn
|
||||
device lapic 10 on end
|
||||
end
|
||||
end
|
||||
|
||||
device domain 0 on
|
||||
subsystemid 0x1022 0x1410 inherit
|
||||
chip northbridge/amd/agesa/family15tn # CPU side of HT root complex
|
||||
|
||||
chip northbridge/amd/agesa/family15tn # PCI side of HT root complex
|
||||
device pci 0.0 on end # Root Complex
|
||||
device pci 2.0 on end # Internal Graphics P2P bridge 0x99XX
|
||||
end #chip northbridge/amd/agesa/family15tn # PCI side of HT root complex
|
||||
|
||||
chip southbridge/amd/agesa/hudson # it is under NB/SB Link, but on the same pci bus
|
||||
device pci 10.0 on end # XHCI HC0
|
||||
device pci 10.1 on end # XHCI HC1
|
||||
device pci 11.0 on end # SATA
|
||||
device pci 12.0 on end # USB
|
||||
device pci 12.2 on end # USB
|
||||
device pci 13.0 on end # USB
|
||||
device pci 13.2 on end # USB
|
||||
device pci 14.0 on # SMBUS
|
||||
chip drivers/generic/generic #dimm 0
|
||||
device i2c 50 on end # 7-bit SPD address
|
||||
end
|
||||
chip drivers/generic/generic #dimm 1
|
||||
device i2c 52 on end # 7-bit SPD address
|
||||
end
|
||||
chip drivers/generic/generic #dimm 2
|
||||
device i2c 51 on end # 7-bit SPD address
|
||||
end
|
||||
chip drivers/generic/generic #dimm 3
|
||||
device i2c 53 on end # 7-bit SPD address
|
||||
end
|
||||
end # SM
|
||||
device pci 14.1 off end # unused
|
||||
device pci 14.2 on end # HDA 0x4383
|
||||
device pci 14.3 on # LPC 0x780e
|
||||
chip superio/nuvoton/nct5572d
|
||||
device pnp 2e.0 off end # FDC
|
||||
device pnp 2e.1 off end # LPT1
|
||||
device pnp 2e.2 on # COM1
|
||||
io 0x60 = 0x3f8
|
||||
irq 0x70 = 4
|
||||
end
|
||||
device pnp 2e.3 off end # COM2/IR
|
||||
device pnp 2e.5 off end # Keyboard
|
||||
device pnp 2e.6 off end # CIR
|
||||
device pnp 2e.7 on # GPIO6, GPIO7, GPIO8
|
||||
io 0xe0 = 0x7f
|
||||
io 0xe1 = 0x10
|
||||
io 0xe2 = 0x00
|
||||
io 0xe3 = 0x00
|
||||
io 0xe4 = 0xff
|
||||
io 0xe5 = 0xff
|
||||
io 0xe6 = 0xff
|
||||
io 0xe7 = 0xff
|
||||
io 0xec = 0x00
|
||||
io 0xed = 0xff
|
||||
io 0xf4 = 0xff
|
||||
io 0xf5 = 0xff
|
||||
io 0xf6 = 0x00
|
||||
io 0xf7 = 0x00
|
||||
io 0xf8 = 0x00
|
||||
end
|
||||
device pnp 2e.8 on # WDT1, GPIO0, GPIO1
|
||||
io 0x30 = 0x00
|
||||
io 0x60 = 0x00
|
||||
io 0x61 = 0x00
|
||||
io 0xe0 = 0xff
|
||||
io 0xe1 = 0xff
|
||||
io 0xe2 = 0xff
|
||||
io 0xe3 = 0xff
|
||||
io 0xe4 = 0xff
|
||||
io 0xf0 = 0xff
|
||||
io 0xf1 = 0x28
|
||||
io 0xf2 = 0x00
|
||||
io 0xf3 = 0x00
|
||||
io 0xf4 = 0x08
|
||||
io 0xf5 = 0xff
|
||||
io 0xf6 = 0x00
|
||||
io 0xf7 = 0xff
|
||||
end
|
||||
device pnp 2e.9 on # GPIO1, GPIO2, GPIO3, GPIO4, GPIO5, GPIO6, GPIO7, GPIO8
|
||||
io 0x30 = 0xfe
|
||||
io 0xe0 = 0xff
|
||||
io 0xe1 = 0x90
|
||||
io 0xe2 = 0x00
|
||||
io 0xe3 = 0x00
|
||||
io 0xe4 = 0x7f
|
||||
io 0xe5 = 0x76
|
||||
io 0xe6 = 0x00
|
||||
io 0xe7 = 0x00
|
||||
io 0xe8 = 0x00
|
||||
io 0xe9 = 0x00
|
||||
io 0xea = 0x00
|
||||
io 0xeb = 0x00
|
||||
io 0xee = 0x00
|
||||
io 0xf0 = 0xff
|
||||
io 0xf1 = 0x7b
|
||||
io 0xf2 = 0x00
|
||||
io 0xf4 = 0xff
|
||||
io 0xf5 = 0xef
|
||||
io 0xf6 = 0x00
|
||||
io 0xf7 = 0x00
|
||||
io 0xfe = 0x00
|
||||
end
|
||||
device pnp 2e.a on # ACPI
|
||||
io 0xe6 = 0x4c
|
||||
io 0xe7 = 0x11
|
||||
io 0xf2 = 0x5d
|
||||
end
|
||||
device pnp 2e.b on # Hardware Monitor, Front Panel LED
|
||||
io 0x30 = 0x01
|
||||
io 0x60 = 0x02
|
||||
io 0x61 = 0x90
|
||||
io 0xe2 = 0x7f
|
||||
io 0xe4 = 0xf1
|
||||
end
|
||||
device pnp 2e.d off end # WDT1
|
||||
device pnp 2e.e off end # CIR WAKE-UP
|
||||
device pnp 2e.f off # GPIO Push-pull/Open-drain selection
|
||||
io 0xe6 = 7f
|
||||
end
|
||||
device pnp 2e.14 off # PORT80 UART
|
||||
io 0xe0 = 0x00
|
||||
end
|
||||
device pnp 2e.16 off end # Deep Sleep
|
||||
end
|
||||
end #device pci 14.3 # LPC
|
||||
|
||||
device pci 14.4 on end # PCI bridge
|
||||
device pci 14.7 off end # Not present with BIOS ([AMD] FCH SD Flash Controller [1022:7806])
|
||||
device pci 15.0 on end # PCI bridge
|
||||
device pci 15.1 on end # PCI bridge
|
||||
device pci 15.2 on end # PCI bridge # Only present with the original boot firmware
|
||||
end #chip southbridge/amd/hudson
|
||||
|
||||
device pci 18.0 on end
|
||||
device pci 18.1 on end
|
||||
device pci 18.2 on end
|
||||
device pci 18.3 on end
|
||||
device pci 18.4 on end
|
||||
device pci 18.5 on end
|
||||
|
||||
register "spdAddrLookup" = "
|
||||
{
|
||||
{ {0xA0, 0xA4}, {0xA2, 0xA6}, }, // socket 0 - Channel 0 & 1 - 8-bit SPD addresses
|
||||
{ {0x00, 0x00}, {0x00, 0x00}, }, // socket 1 - Channel 0 & 1 - 8-bit SPD addresses
|
||||
}"
|
||||
|
||||
end #chip northbridge/amd/agesa/family15tn # CPU side of HT root complex
|
||||
end #domain
|
||||
end #chip northbridge/amd/agesa/family15tn/root_complex
|
||||
|
|
@ -35,15 +35,25 @@
|
|||
#include <southbridge/amd/agesa/hudson/smbus.h>
|
||||
#include <stdint.h>
|
||||
#include <string.h>
|
||||
#if CONFIG_BOARD_ASUS_F2A85_M
|
||||
#include <superio/ite/common/ite.h>
|
||||
#include <superio/ite/it8728f/it8728f.h>
|
||||
#elif CONFIG_BOARD_ASUS_F2A85_M_PRO
|
||||
#include <superio/nuvoton/common/nuvoton.h>
|
||||
#include <superio/nuvoton/nct6779d/nct6779d.h>
|
||||
#endif /* CONFIG_BOARD_ASUS_F2A85_M */
|
||||
|
||||
|
||||
#define MMIO_NON_POSTED_START 0xfed00000
|
||||
#define MMIO_NON_POSTED_END 0xfedfffff
|
||||
#define SB_MMIO_MISC32(x) *(volatile u32 *)(AMD_SB_ACPI_MMIO_ADDR + 0xE00 + (x))
|
||||
|
||||
#if CONFIG_BOARD_ASUS_F2A85_M
|
||||
#define SERIAL_DEV PNP_DEV(0x2e, IT8728F_SP1)
|
||||
#define GPIO_DEV PNP_DEV(0x2e, IT8728F_GPIO)
|
||||
#elif CONFIG_BOARD_ASUS_F2A85_M_PRO
|
||||
#define SERIAL_DEV PNP_DEV(0x2e, NCT6779D_SP1)
|
||||
#endif /* CONFIG_BOARD_ASUS_F2A85_M */
|
||||
|
||||
static void sbxxx_enable_48mhzout(void)
|
||||
{
|
||||
|
|
@ -96,9 +106,13 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
|
|||
|
||||
/* enable SIO clock */
|
||||
sbxxx_enable_48mhzout();
|
||||
#if CONFIG_BOARD_ASUS_F2A85_M
|
||||
ite_kill_watchdog(GPIO_DEV);
|
||||
ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
|
||||
ite_enable_3vsbsw(GPIO_DEV);
|
||||
#elif CONFIG_BOARD_ASUS_F2A85_M_PRO
|
||||
nuvoton_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
|
||||
#endif
|
||||
console_init();
|
||||
|
||||
/* turn on secondary smbus at b20 */
|
||||
|
|
|
|||
Loading…
Reference in New Issue