GNUBoot
/
coreboot-kgpe-d16
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

soc/amd/stoneyridge: consolidate addresses in iomap.h 

Take the existing scattered around address space defines
and put them in iomap.h.

Change-Id: I78aa1370b05d3e2f90d43f754076b81734cccf7f
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/22319
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
This commit is contained in:
Aaron Durbin 2017-11-03 12:57:45 -06:00
parent 733ad92c65
commit 4239a1671c
3 changed files with 32 additions and 35 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

31
src/soc/amd/stoneyridge/include/soc/iomap.h
View File

@ -17,6 +17,35 @@
#ifndef __SOC_STONEYRIDGE_IOMAP_H__
#define __SOC_STONEYRIDGE_IOMAP_H__
#define AMD_SB_ACPI_MMIO_ADDR 0xfed80000ul
/* MMIO Ranges */
#define SPI_BASE_ADDRESS 0xfec10000
#define IO_APIC2_ADDR 0xfec20000
#if IS_ENABLED(CONFIG_HPET_ADDRESS_OVERRIDE)
#error HPET address override is not allowed and must be fixed at 0xfed00000
#endif
#define HPET_BASE_ADDRESS 0xfed00000
/* Register blocks at fixed offsets from FED8_0000h and enabled in PMx04[1] */
#define AMD_SB_ACPI_MMIO_ADDR 0xfed80000
#define APU_SMI_BASE 0xfed80200
#define PM_MMIO_BASE 0xfed80300
#define APU_UART0_BASE 0xfedc6000
#define APU_UART1_BASE 0xfedc8000
#define FLASH_BASE_ADDR ((0xffffffff - CONFIG_ROM_SIZE) + 1)
/* I/O Ranges */
#define ACPI_SMI_CTL_PORT 0xb2
#define STONEYRIDGE_ACPI_IO_BASE CONFIG_STONEYRIDGE_ACPI_IO_BASE
#define ACPI_PM_EVT_BLK (STONEYRIDGE_ACPI_IO_BASE + 0x00) /* 4 bytes */
#define ACPI_PM1_CNT_BLK (STONEYRIDGE_ACPI_IO_BASE + 0x04) /* 2 bytes */
#define ACPI_CPU_CONTROL (STONEYRIDGE_ACPI_IO_BASE + 0x08) /* 6 bytes */
#define ACPI_GPE0_BLK (STONEYRIDGE_ACPI_IO_BASE + 0x10) /* 8 bytes */
#define ACPI_PM_TMR_BLK (STONEYRIDGE_ACPI_IO_BASE + 0x18) /* 4 bytes */
#define SMB_BASE_ADDR 0xb00
#define AB_INDX 0xcd8
#define AB_DATA (AB_INDX+4)
#define SYS_RESET 0xcf9
#endif /* __SOC_STONEYRIDGE_IOMAP_H__ */

6
src/soc/amd/stoneyridge/include/soc/smbus.h
View File

@ -17,6 +17,7 @@
#define __STONEYRIDGE_SMBUS_H__
#include <stdint.h>
#include <soc/iomap.h>
#define SMBHSTSTAT 0x0
#define SMBHST_STAT_FAILED 0x10
@ -59,8 +60,6 @@
#define SMBSLVDAT 0xc
#define SMBTIMING 0xe
#define SMB_BASE_ADDR 0xb00
#define AX_INDXC 0
#define AX_INDXP 2
#define AXCFG 4
@ -68,9 +67,6 @@
#define RC_INDXC 1
#define RC_INDXP 3
#define AB_INDX 0xcd8
#define AB_DATA (AB_INDX+4)
/*
* Between 1-10 seconds, We should never timeout normally
* Longer than this is just painful when a timeout condition occurs.

30
src/soc/amd/stoneyridge/include/soc/southbridge.h
View File

@ -21,24 +21,9 @@
#include <types.h>
#include <device/pci_ids.h>
#include <device/device.h>
#include <soc/iomap.h>
#include "chip.h"
#define IO_APIC2_ADDR 0xfec20000
#if IS_ENABLED(CONFIG_HPET_ADDRESS_OVERRIDE)
#error HPET address override is not allowed and must be fixed at 0xfed00000
#endif
#define HPET_BASE_ADDRESS 0xfed00000
/* Register blocks at fixed offsets from FED8_0000h and enabled in PMx04[1] */
#define APU_SMI_BASE 0xfed80200
#define PM_MMIO_BASE 0xfed80300
#define APU_UART0_BASE 0xfedc6000
#define APU_UART1_BASE 0xfedc8000
/* Power management index/data registers */
#define BIOSRAM_INDEX 0xcd4
#define BIOSRAM_DATA 0xcd5
@ -82,16 +67,6 @@
#define PM_LPC_A20_EN BIT(1)
#define PM_LPC_ENABLE BIT(0)
#define SYS_RESET 0xcf9
#define STONEYRIDGE_ACPI_IO_BASE CONFIG_STONEYRIDGE_ACPI_IO_BASE
#define ACPI_PM_EVT_BLK (STONEYRIDGE_ACPI_IO_BASE + 0x00) /* 4 bytes */
#define ACPI_PM1_CNT_BLK (STONEYRIDGE_ACPI_IO_BASE + 0x04) /* 2 bytes */
#define ACPI_PM_TMR_BLK (STONEYRIDGE_ACPI_IO_BASE + 0x18) /* 4 bytes */
#define ACPI_GPE0_BLK (STONEYRIDGE_ACPI_IO_BASE + 0x10) /* 8 bytes */
#define ACPI_CPU_CONTROL (STONEYRIDGE_ACPI_IO_BASE + 0x08) /* 6 bytes */
#define ACPI_SMI_CTL_PORT 0xb2
#define ACPI_SMI_CMD_CST_CONTROL 0xde
#define ACPI_SMI_CMD_PST_CONTROL 0xad
#define ACPI_SMI_CMD_DISABLE 0xbe
@ -107,7 +82,6 @@
#define SPI_ROM_ENABLE BIT(1)
#define SPI_ROM_ALT_ENABLE BIT(0)
#define SPI_PRESERVE_BITS (BIT(0) | BIT(1) | BIT(2) | BIT(3))
#define SPI_BASE_ADDRESS 0xfec10000
#define LPC_PCI_CONTROL 0x40
#define LEGACY_DMA_EN BIT(2)
@ -239,8 +213,6 @@
#define FCH_MISC_REG40_OSCOUT1_EN BIT(2)
#define FLASH_BASE_ADDR ((0xffffffff - CONFIG_ROM_SIZE) + 1)
static inline int sb_sata_enable(void)
{
/* True if IDE or AHCI. */