GNUBoot
/
coreboot-kgpe-d16
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

drivers: Add support for X-Powers AXP209 PMU 

Change-Id: I1de0e656a38527b172af1d0b5bcd97acbfc03bf0
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4591
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This commit is contained in:
Alexandru Gagniuc 2013-12-30 01:21:55 -05:00
parent 066dcec2fe
commit 428eeff923
8 changed files with 269 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
src/drivers/Kconfig
View File

@ -37,3 +37,4 @@ source src/drivers/sil/Kconfig
source src/drivers/spi/Kconfig
source src/drivers/ti/Kconfig
source src/drivers/trident/Kconfig
source src/drivers/xpowers/Kconfig

1
src/drivers/Makefile.inc
View File

@ -34,4 +34,5 @@ subdirs-y += spi
subdirs-y += ti
subdirs-y += ipmi
subdirs-y += elog
subdirs-y += xpowers
subdirs-$(CONFIG_ARCH_X86) += pc80

1
src/drivers/xpowers/Kconfig Normal file
View File

@ -0,0 +1 @@
source src/drivers/xpowers/axp209/Kconfig

1
src/drivers/xpowers/Makefile.inc Normal file
View File

@ -0,0 +1 @@
subdirs-$(CONFIG_DRIVER_XPOWERS_AXP209) += axp209

15
src/drivers/xpowers/axp209/Kconfig Normal file
View File

@ -0,0 +1,15 @@
config DRIVER_XPOWERS_AXP209
bool
default n
help
X-Powers AXP902 Power Management Unit
if DRIVER_XPOWERS_AXP209
config DRIVER_XPOWERS_AXP209_BOOTBLOCK
bool
default n
help
Make AXP209 functionality available in he bootblock.
endif # DRIVER_XPOWERS_AXP209

3
src/drivers/xpowers/axp209/Makefile.inc Normal file
View File

@ -0,0 +1,3 @@
bootblock-$(CONFIG_DRIVER_XPOWERS_AXP209_BOOTBLOCK) += axp209.c
romstage-$(CONFIG_DRIVER_XPOWERS_AXP209) += axp209.c
ramstage-$(CONFIG_DRIVER_XPOWERS_AXP209) += axp209.c

230
src/drivers/xpowers/axp209/axp209.c Normal file
View File

@ -0,0 +1,230 @@
/*
* Driver for X-Powers AXP 209 Power Management Unit
*
* Despite axp209_read/write only working on a byte at a time, there is no such
* limitation in the AXP209.
*
* Copyright (C) 2013 Alexandru Gagniuc <mr.nuke.me@gmail.com>
* Subject to the GNU GPL v2, or (at your option) any later version.
*/
#include "axp209.h"
#include <device/i2c.h>
/* Hide these definitions from the rest of the source, so keep them here */
enum registers {
REG_POWER_STATUS = 0x00,
REG_POWER_MODE = 0x01,
REG_OTG_VBUS = 0x02,
REG_CHIP_ID = 0x03,
REG_CHIP_PWROUT_CTL = 0x12,
REG_DCDC2_VOLTAGE = 0x23,
REG_DCDC2_LDO3_CTL = 0x25,
REG_DCDC3_VOLTAGE = 0x27,
REG_LDO24_VOLTAGE = 0x28,
REG_LDO3_VOLTAGE = 0x29,
REG_VBUS_IPSOUT = 0x30,
REG_PWROFF_VOLTAGE = 0x31,
REG_SHTDWN_SETTING = 0x32,
};
/* REG_LDO24_VOLTAGE definitions */
#define REG_LDO24_VOLTAGE_LDO2_MASK (0xf << 4)
#define REG_LDO24_VOLTAGE_LDO2_VAL(x) ((x << 4) & REG_LDO24_VOLTAGE_LDO2_MASK)
#define REG_LDO24_VOLTAGE_LDO4_MASK (0xf << 0)
#define REG_LDO24_VOLTAGE_LDO4_VAL(x) ((x << 0) & REG_LDO24_VOLTAGE_LDO4_MASK)
/*
* Read and write accessors. We only work on one register at a time, but there
* is no limitation on the AXP209 as to how many registers we may read or write
* in one transaction.
* These return the number of bytes read/written, or an error code. In this
* case, they return 1 on success, or an error code otherwise.
*/
static int axp209_read(u8 bus, u8 reg, u8 *val)
{
return i2c_read(bus, AXP209_I2C_ADDR, reg, 1, val, 1);
}
static int axp209_write(u8 bus, u8 reg, u8 val)
{
return i2c_write(bus, AXP209_I2C_ADDR, reg, 1, &val, 1);
}
/**
* \brief Identify and initialize an AXP209 on the I²C bus
*
* @param[in] bus I²C bus to which the AXP209 is connected
* @return CB_SUCCES on if an AXP209 is found, or an error code otherwise.
*/
enum cb_err axp209_init(u8 bus)
{
u8 id;
if (axp209_read(bus, REG_CHIP_ID, &id) != 1)
return CB_ERR;
/* From U-Boot code : Low 4 bits is chip version */
if ((id & 0x0f) != 0x1)
return CB_ERR;
return CB_SUCCESS;
}
/**
* \brief Configure the output voltage of DC-DC2 converter
*
* If the requested voltage is not available, the next lowest voltage will
* be applied.
* Valid values are between 700mV and 2275mV
*
* @param[in] millivolts voltage in mV units.
* @param[in] bus I²C bus to which the AXP209 is connected
* @return CB_SUCCES on success,
* CB_ERR_ARG if voltage is out of range, or an error code otherwise.
*/
enum cb_err axp209_set_dcdc2_voltage(u8 bus, u16 millivolts)
{
u8 val;
if (millivolts < 700 || millivolts > 2275)
return CB_ERR_ARG;
val = (millivolts - 700) / 25;
if (axp209_write(bus, REG_DCDC2_VOLTAGE, val) != 1)
return CB_ERR;
return CB_SUCCESS;
}
/**
* \brief Configure the output voltage of DC-DC3 converter
*
* If the requested voltage is not available, the next lowest voltage will
* be applied.
* Valid values are between 700mV and 3500mV
*
* @param[in] millivolts voltage in mV units.
* @param[in] bus I²C bus to which the AXP209 is connected
* @return CB_SUCCES on success,
* CB_ERR_ARG if voltage is out of range, or an error code otherwise.
*/
enum cb_err axp209_set_dcdc3_voltage(u8 bus, u16 millivolts)
{
u8 val;
if (millivolts < 700 || millivolts > 3500)
return CB_ERR_ARG;
val = (millivolts - 700) / 25;
if (axp209_write(bus, REG_DCDC3_VOLTAGE, val) != 1)
return CB_ERR;
return CB_SUCCESS;
}
/**
* \brief Configure the output voltage of LDO2 regulator
*
* If the requested voltage is not available, the next lowest voltage will
* be applied.
* Valid values are between 700mV and 3300mV
*
* @param[in] millivolts voltage in mV units.
* @param[in] bus I²C bus to which the AXP209 is connected
* @return CB_SUCCES on success,
* CB_ERR_ARG if voltage is out of range, or an error code otherwise.
*/
enum cb_err axp209_set_ldo2_voltage(u8 bus, u16 millivolts)
{
u8 reg8, val;
if (millivolts < 1800 || millivolts > 3300)
return CB_ERR_ARG;
/* Try to read the register first, and stop here on error */
if (axp209_read(bus, REG_LDO24_VOLTAGE, &reg8) != 1)
return CB_ERR;
val = (millivolts - 1800) / 100;
reg8 &= ~REG_LDO24_VOLTAGE_LDO2_MASK;
reg8 |= REG_LDO24_VOLTAGE_LDO2_VAL(val);
if (axp209_write(bus, REG_LDO24_VOLTAGE, reg8) != 1)
return CB_ERR;
return CB_SUCCESS;
}
/**
* \brief Configure the output voltage of LDO4 regulator
*
* If the requested voltage is not available, the next lowest voltage will
* be applied.
* Valid values are between 700mV and 3500mV. Datasheet lists maximum voltage at
* 2250mV, but hardware samples go as high as 3500mV.
*
* @param[in] millivolts voltage in mV units.
* @param[in] bus I²C bus to which the AXP209 is connected
* @return CB_SUCCES on success,
* CB_ERR_ARG if voltage is out of range, or an error code otherwise.
*/
enum cb_err axp209_set_ldo3_voltage(u8 bus, u16 millivolts)
{
u8 val;
/* Datasheet lists 2250 max, but PMU will output up to 3500mV */
if (millivolts < 700 || millivolts > 3500)
return CB_ERR_ARG;
val = (millivolts - 700) / 25;
if (axp209_write(bus, REG_LDO3_VOLTAGE, val) != 1)
return CB_ERR;
return CB_SUCCESS;
}
/**
* \brief Configure the output voltage of DC-DC2 converter
*
* If the requested voltage is not available, the next lowest voltage will
* be applied.
* Valid values are between 1250V and 3300mV
*
* @param[in] millivolts voltage in mV units.
* @param[in] bus I²C bus to which the AXP209 is connected
* @return CB_SUCCES on success,
* CB_ERR_ARG if voltage is out of range, or an error code otherwise.
*/
enum cb_err axp209_set_ldo4_voltage(u8 bus, u16 millivolts)
{
u8 reg8, val;
if (millivolts < 1250 || millivolts > 3300)
return CB_ERR_ARG;
/* Try to read the register first, and stop here on error */
if (axp209_read(bus, REG_LDO24_VOLTAGE, &reg8) != 1)
return CB_ERR;
if (millivolts <= 2000)
val = (millivolts - 1200) / 100;
else if (millivolts <= 2700)
val = 9 + (millivolts - 2500) / 100;
else if (millivolts <= 2800)
val = 11;
else
val = 12 + (millivolts - 3000) / 100;
reg8 &= ~REG_LDO24_VOLTAGE_LDO4_MASK;
reg8 |= REG_LDO24_VOLTAGE_LDO4_VAL(val);
if (axp209_write(bus, REG_LDO24_VOLTAGE, reg8) != 1)
return CB_ERR;
return CB_SUCCESS;
}

17
src/drivers/xpowers/axp209/axp209.h Normal file
View File

@ -0,0 +1,17 @@
/*
* Definitions for X-Powers AXP 209 Power Management Unit
*
* Copyright (C) 2013 Alexandru Gagniuc <mr.nuke.me@gmail.com>
* Subject to the GNU GPL v2, or (at your option) any later version.
*/
#include <types.h>
#define AXP209_I2C_ADDR (0x68 >> 1)
enum cb_err axp209_init(u8 bus);
enum cb_err axp209_set_dcdc2_voltage(u8 bus, u16 millivolts);
enum cb_err axp209_set_dcdc3_voltage(u8 bus, u16 millivolts);
enum cb_err axp209_set_ldo2_voltage(u8 bus, u16 millivolts);
enum cb_err axp209_set_ldo3_voltage(u8 bus, u16 millivolts);
enum cb_err axp209_set_ldo4_voltage(u8 bus, u16 millivolts);