flashrom: Trivial README change Flashrom->flashrom

Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Peter Stuge <peter@stuge.se>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4141 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This commit is contained in:
Peter Stuge 2009-04-20 12:34:30 +00:00
parent dbda3a9919
commit 4399d3c832
1 changed files with 5 additions and 5 deletions

View File

@ -1,8 +1,8 @@
-------------------------------------------------------------------------------
Flashrom README
flashrom README
-------------------------------------------------------------------------------
Flashrom is a utility for reading, writing, and erasing flash ROM chips.
flashrom is a utility for reading, writing, and erasing flash ROM chips.
It's often used to flash BIOS/coreboot/firmware images.
It supports a wide range of DIP32, PLCC32, DIP8, SO8/SOIC8, TSOP32, and
@ -51,14 +51,14 @@ Usage
Exit status
-----------
Flashrom exits with 0 on success, 1 on most failures but with 2 if /dev/mem
flashrom exits with 0 on success, 1 on most failures but with 2 if /dev/mem
(/dev/xsvc on Solaris) can not be opened and with 3 if a call to mmap() fails.
coreboot Table and Mainboard Identification
--------------------------------------------
Flashrom reads the coreboot table to determine the current mainboard. If no
flashrom reads the coreboot table to determine the current mainboard. If no
coreboot table could be read or if you want to override these values, you can
specify -m, e.g.:
@ -72,7 +72,7 @@ coreboot table is found.
ROM Layout Support
------------------
Flashrom supports ROM layouts. This allows you to flash certain parts of
flashrom supports ROM layouts. This allows you to flash certain parts of
the flash chip only. A ROM layout file looks like follows:
00000000:00008fff gfxrom