diff --git a/src/mainboard/ibm/Kconfig b/src/mainboard/ibm/Kconfig
deleted file mode 100644
index 256fefe52d..0000000000
--- a/src/mainboard/ibm/Kconfig
+++ /dev/null
@@ -1,16 +0,0 @@
-if VENDOR_IBM
-
-choice
-	prompt "Mainboard model"
-
-source "src/mainboard/ibm/*/Kconfig.name"
-
-endchoice
-
-source "src/mainboard/ibm/*/Kconfig"
-
-config MAINBOARD_VENDOR
-	string
-	default "IBM"
-
-endif # VENDOR_IBM
diff --git a/src/mainboard/ibm/Kconfig.name b/src/mainboard/ibm/Kconfig.name
deleted file mode 100644
index 7f3cb17a62..0000000000
--- a/src/mainboard/ibm/Kconfig.name
+++ /dev/null
@@ -1,2 +0,0 @@
-config VENDOR_IBM
-	bool "IBM"
diff --git a/src/mainboard/ibm/e325/Kconfig b/src/mainboard/ibm/e325/Kconfig
deleted file mode 100644
index 04006771d8..0000000000
--- a/src/mainboard/ibm/e325/Kconfig
+++ /dev/null
@@ -1,58 +0,0 @@
-if BOARD_IBM_E325
-
-config BOARD_SPECIFIC_OPTIONS # dummy
-	def_bool y
-	select CPU_AMD_SOCKET_940
-	select NORTHBRIDGE_AMD_AMDK8
-	select SOUTHBRIDGE_AMD_AMD8111
-	select SOUTHBRIDGE_AMD_AMD8131
-	select SUPERIO_NSC_PC87366
-	select PARALLEL_CPU_INIT
-	select HAVE_OPTION_TABLE
-	select HAVE_PIRQ_TABLE
-	select HAVE_MP_TABLE
-	select SB_HT_CHAIN_UNITID_OFFSET_ONLY
-	select BOARD_ROMSIZE_KB_512
-	select QRANK_DIMM_SUPPORT
-
-config MAINBOARD_DIR
-	string
-	default ibm/e325
-
-config DCACHE_RAM_BASE
-	hex
-	default 0xcf000
-
-config DCACHE_RAM_SIZE
-	hex
-	default 0x1000
-
-config APIC_ID_OFFSET
-	hex
-	default 0x0
-
-config MAINBOARD_PART_NUMBER
-	string
-	default "eServer 325"
-
-config MAX_CPUS
-	int
-	default 1
-
-config MAX_PHYSICAL_CPUS
-	int
-	default 1
-
-config HT_CHAIN_END_UNITID_BASE
-	hex
-	default 0x20
-
-config HT_CHAIN_UNITID_BASE
-	hex
-	default 0x1
-
-config IRQ_SLOT_COUNT
-	int
-	default 12
-
-endif # BOARD_IBM_E325
diff --git a/src/mainboard/ibm/e325/Kconfig.name b/src/mainboard/ibm/e325/Kconfig.name
deleted file mode 100644
index 7a0ea83a66..0000000000
--- a/src/mainboard/ibm/e325/Kconfig.name
+++ /dev/null
@@ -1,2 +0,0 @@
-config BOARD_IBM_E325
-	bool "eServer 325"
diff --git a/src/mainboard/ibm/e325/board_info.txt b/src/mainboard/ibm/e325/board_info.txt
deleted file mode 100644
index 5bb0bcaea5..0000000000
--- a/src/mainboard/ibm/e325/board_info.txt
+++ /dev/null
@@ -1,2 +0,0 @@
-Category: server
-Board URL: http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=ibm&lndocid=MIGR-53255
diff --git a/src/mainboard/ibm/e325/cmos.layout b/src/mainboard/ibm/e325/cmos.layout
deleted file mode 100644
index 4e081ea1aa..0000000000
--- a/src/mainboard/ibm/e325/cmos.layout
+++ /dev/null
@@ -1,60 +0,0 @@
-entries
-
-0          384       r       0        reserved_memory
-384          1       e       4        boot_option
-388          4       r       0        reboot_bits
-392          3       e       5        baud_rate
-395          1       e       1        hw_scrubber
-396          1       e       1        interleave_chip_selects
-397          2       e       8        max_mem_clock
-399          1       e       2        multi_core
-400          1       e       1        power_on_after_fail
-412          4       e       6        debug_level
-440          4       e       9        slow_cpu
-444          1       e       1        nmi
-445          1       e       1        iommu
-456          1       e       1        ECC_memory
-728        256       h       0        user_data
-984         16       h       0        check_sum
-# Reserve the extended AMD configuration registers
-1000        24       r       0        amd_reserved
-
-
-
-enumerations
-
-#ID value   text
-1     0     Disable
-1     1     Enable
-2     0     Enable
-2     1     Disable
-4     0     Fallback
-4     1     Normal
-5     0     115200
-5     1     57600
-5     2     38400
-5     3     19200
-5     4     9600
-5     5     4800
-5     6     2400
-5     7     1200
-6     6     Notice
-6     7     Info
-6     8     Debug
-6     9     Spew
-8     0     DDR400
-8     1     DDR333
-8     2     DDR266
-8     3     DDR200
-9     0     off
-9     1     87.5%
-9     2     75.0%
-9     3     62.5%
-9     4     50.0%
-9     5     37.5%
-9     6     25.0%
-9     7     12.5%
-
-checksums
-
-checksum 392 983 984
diff --git a/src/mainboard/ibm/e325/devicetree.cb b/src/mainboard/ibm/e325/devicetree.cb
deleted file mode 100644
index f63249d02a..0000000000
--- a/src/mainboard/ibm/e325/devicetree.cb
+++ /dev/null
@@ -1,69 +0,0 @@
-chip northbridge/amd/amdk8/root_complex
-	device cpu_cluster 0 on
-		chip cpu/amd/socket_940
-			device lapic 0 on end
-		end
-	end
-	device domain 0 on
-		chip northbridge/amd/amdk8
-			device pci 18.0 on end # LDT 0
-			device pci 18.0 on     # LDT 1
-				chip southbridge/amd/amd8131
-					device pci 0.0 on end
-					device pci 0.1 on end
-					device pci 1.0 on end
-					device pci 1.1 on end
-				end
-				chip southbridge/amd/amd8111
-					device pci 0.0 on
-						device pci 0.0 on end
-						device pci 0.1 on end
-						device pci 0.2 on end
-						device pci 1.0 off end
-					end
-					device pci 1.0 on
-						chip superio/nsc/pc87366
-							device	pnp 2e.0 off  # Floppy
-								 io 0x60 = 0x3f0
-								irq 0x70 = 6
-								drq 0x74 = 2
-							end
-							device pnp 2e.1 off  # Parallel Port
-								 io 0x60 = 0x378
-								irq 0x70 = 7
-							end
-							device pnp 2e.2 off # Com 2
-								 io 0x60 = 0x2f8
-								irq 0x70 = 3
-							end
-							device pnp 2e.3 on  # Com 1
-								 io 0x60 = 0x3f8
-								irq 0x70 = 4
-							end
-							device pnp 2e.4 off end # SWC
-							device pnp 2e.5 off end # Mouse
-							device pnp 2e.6 on  # Keyboard
-								 io 0x60 = 0x60
-								 io 0x62 = 0x64
-								irq 0x70 = 1
-							end
-							device pnp 2e.7 off end # GPIO
-							device pnp 2e.8 off end # ACB
-							device pnp 2e.9 off end # FSCM
-							device pnp 2e.a off end # WDT
-						end
-					end
-					device pci 1.1 on end
-					device pci 1.2 on end
-					device pci 1.3 on end
-					device pci 1.5 off end
-					device pci 1.6 off end
-				end
-			end #  device pci 18.0
-			device pci 18.0 on end # LDT2
-			device pci 18.1 on end
-			device pci 18.2 on end
-			device pci 18.3 on end
-		end
-	end
-end
diff --git a/src/mainboard/ibm/e325/irq_tables.c b/src/mainboard/ibm/e325/irq_tables.c
deleted file mode 100644
index 24987b7e00..0000000000
--- a/src/mainboard/ibm/e325/irq_tables.c
+++ /dev/null
@@ -1,60 +0,0 @@
-#include <arch/pirq_routing.h>
-#include <device/pci.h>
-
-#define IRQ_ROUTER_BUS		0
-#define IRQ_ROUTER_DEVFN	PCI_DEVFN(4,3)
-#define IRQ_ROUTER_VENDOR	0x1022
-#define IRQ_ROUTER_DEVICE	0x746b
-
-#define AVAILABLE_IRQS 0xdef8
-#define IRQ_SLOT(slot, bus, dev, fn, linka, linkb, linkc, linkd) \
-	{ bus, (dev<<3)|fn, {{ linka, AVAILABLE_IRQS}, { linkb, AVAILABLE_IRQS}, \
-	{linkc, AVAILABLE_IRQS}, {linkd, AVAILABLE_IRQS}}, slot, 0}
-
-/*  Each IRQ_SLOT entry consists of:
- *  bus, devfn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu
- */
-
-static const struct irq_routing_table intel_irq_routing_table = {
-	PIRQ_SIGNATURE,		/* u32 signature */
-	PIRQ_VERSION,           /* u16 version   */
-	32+16*CONFIG_IRQ_SLOT_COUNT,	/* there can be total CONFIG_IRQ_SLOT_COUNT table entries */
-	IRQ_ROUTER_BUS,		/* Where the interrupt router lies (bus) */
-	IRQ_ROUTER_DEVFN,	/* Where the interrupt router lies (dev) */
-	0x00,			/* IRQs devoted exclusively to PCI usage */
-	IRQ_ROUTER_VENDOR,	/* Vendor */
-	IRQ_ROUTER_DEVICE,	/* Device */
-	0x00,			/* Miniport data */
-	{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */
-	0x34,			/*  u8 checksum , mod 256 checksum must give zero */
-	{	/* slot(0=onboard), devfn, irqlinks (line id, 0=not routed) */
-		/* Northbridge, Node 0 */
-		IRQ_SLOT(0x0, 0x00,0x18,0x0, 0,0,0,0),
-		/* AMD-8131 PCI-X Bridge */
-		IRQ_SLOT(0x0, 0x01,0x01,0x0, 0,0,0,0),
-		/* Onboard LSI SCSI Controller */
-		IRQ_SLOT(0x0, 0x02,0x02,0x0, 3,0,0,0),
-		/* Onboard Broadcom NICs */
-		IRQ_SLOT(0x0, 0x02,0x01,0x0, 1,2,0,0),
-		/* AMD-8131 PCI-X Bridge */
-		IRQ_SLOT(0x0, 0x01,0x02,0x0, 0,0,0,0),
-		/* PCI Slot 1-2 */
-		IRQ_SLOT(0x1, 0x03,0x03,0x0, 1,2,3,4),
-		IRQ_SLOT(0x2, 0x03,0x04,0x0, 2,3,4,1),
-		/* AMD-8111 PCI Bridge */
-		IRQ_SLOT(0x0, 0x01,0x03,0x0, 0,0,0,0),
-		/* USB Controller */
-		IRQ_SLOT(0x0, 0x04,0x00,0x0, 0,0,0,4),
-		/* ATI Rage XL VGA */
-		IRQ_SLOT(0x0, 0x04,0x05,0x0, 1,0,0,0),
-		/* AMD-8111 LPC Dridge */
-		IRQ_SLOT(0x0, 0x01,0x04,0x0, 0,0,0,0),
-		/* Northbridge, Node 1 */
-		IRQ_SLOT(0x0, 0x00,0x19,0x0, 0,0,0,0),
-
-	}
-};
-unsigned long write_pirq_routing_table(unsigned long addr)
-{
-        return copy_pirq_routing_table(addr, &intel_irq_routing_table);
-}
diff --git a/src/mainboard/ibm/e325/mptable.c b/src/mainboard/ibm/e325/mptable.c
deleted file mode 100644
index 1dad72c6e1..0000000000
--- a/src/mainboard/ibm/e325/mptable.c
+++ /dev/null
@@ -1,133 +0,0 @@
-#include <console/console.h>
-#include <arch/smp/mpspec.h>
-#include <arch/ioapic.h>
-#include <device/pci.h>
-#include <string.h>
-#include <stdint.h>
-
-static void *smp_write_config_table(void *v)
-{
-	struct mp_config_table *mc;
-
-	int bus_isa;
-	unsigned char bus_8111_0;
-	unsigned char bus_8111_1;
-	unsigned char bus_8131_1;
-	unsigned char bus_8131_2;
-
-	mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
-
-	mptable_init(mc, LOCAL_APIC_ADDR);
-
-	smp_write_processors(mc);
-
-	{
-		device_t dev;
-
-		/* 8111 */
-		dev = dev_find_slot(1, PCI_DEVFN(0x03,0));
-		if (dev) {
-                	bus_8111_0 = pci_read_config8(dev, PCI_PRIMARY_BUS);
-			bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
-		} else {
-			printk(BIOS_DEBUG, "ERROR - could not find PCI 1:03.0, using defaults\n");
-			bus_8111_0 = 1;
-			bus_8111_1 = 4;
-		}
-
-		/* 8131-1 */
-		dev = dev_find_slot(1, PCI_DEVFN(0x01,0));
-		if (dev) {
-			bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
-
-		} else {
-			printk(BIOS_DEBUG, "ERROR - could not find PCI 1:01.0, using defaults\n");
-			bus_8131_1 = 2;
-		}
-
-		/* 8131-2 */
-		dev = dev_find_slot(1, PCI_DEVFN(0x02,0));
-		if (dev) {
-			bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS);
-		} else {
-			printk(BIOS_DEBUG, "ERROR - could not find PCI 1:02.0, using defaults\n");
-			bus_8131_2 = 3;
-		}
-	}
-
-	mptable_write_buses(mc, NULL, &bus_isa);
-
-	/* Legacy IOAPIC #2 */
-	smp_write_ioapic(mc, 2, 0x11, VIO_APIC_VADDR);
-	{
-		device_t dev;
-		struct resource *res;
-		/* 8131-1 apic #3 */
-		dev = dev_find_slot(1, PCI_DEVFN(0x01,1));
-		if (dev) {
-			res = find_resource(dev, PCI_BASE_ADDRESS_0);
-			if (res) {
-				smp_write_ioapic(mc, 0x03, 0x11,
-						 res2mmio(res, 0, 0));
-			}
-		}
-		/* 8131-2 apic #4 */
-		dev = dev_find_slot(1, PCI_DEVFN(0x02,1));
-		if (dev) {
-			res = find_resource(dev, PCI_BASE_ADDRESS_0);
-			if (res) {
-				smp_write_ioapic(mc, 0x04, 0x11,
-						 res2mmio(res, 0, 0));
-			}
-		}
-	}
-
-	mptable_add_isa_interrupts(mc, bus_isa, 0x2, 0);
-
-	/* PCI Ints:	     Type	Polarity    	    Trigger		  	Bus ID      PCIDEVNUM|IRQ  APIC ID PIN# */
-	/* Integrated SMBus 2.0 */
-        smp_write_intsrc(mc, mp_INT,	MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8111_0, (0x04<<2)|3, 0x2, 0x13);
-	/* Integrated AMD AC97 Audio */
-        smp_write_intsrc(mc, mp_INT,    MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8111_0, (0x04<<2)|1, 0x2, 0x11);
-
-	/* Integrated AMD USB */
-        smp_write_intsrc(mc, mp_INT,    MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8111_1, (0x00<<2)|3, 0x2, 0x13);
-
-	/* On board ATI Rage XL */
-	smp_write_intsrc(mc, mp_INT,    MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8111_1, (0x05<<2)|0, 0x2, 0x10);
-
-	/* On board Broadcom nics */
-	smp_write_intsrc(mc, mp_INT,    MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_1, (0x01<<2)|0, 0x3, 0x00);
-	smp_write_intsrc(mc, mp_INT,    MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_1, (0x01<<2)|1, 0x3, 0x01);
-
-	/* On board LSI SCSI */
-	smp_write_intsrc(mc, mp_INT,    MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_1, (0x02<<2)|0, 0x3, 0x02);
-
-	/* PCI Slot 1 PCIX */
-	smp_write_intsrc(mc, mp_INT,    MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_2, (0x03<<2)|0, 0x2, 0x10);
-	smp_write_intsrc(mc, mp_INT,    MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_2, (0x03<<2)|1, 0x2, 0x11);
-	smp_write_intsrc(mc, mp_INT,    MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_2, (0x03<<2)|2, 0x2, 0x12);
-	smp_write_intsrc(mc, mp_INT,    MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_2, (0x03<<2)|3, 0x2, 0x13);
-
-	/* PCI Slot 2 PCIX */
-	smp_write_intsrc(mc, mp_INT,    MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_2, (0x04<<2)|0, 0x2, 0x11);
-	smp_write_intsrc(mc, mp_INT,    MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_2, (0x04<<2)|1, 0x2, 0x12);
-	smp_write_intsrc(mc, mp_INT,    MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_2, (0x04<<2)|2, 0x2, 0x13);
-	smp_write_intsrc(mc, mp_INT,    MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_2, (0x04<<2)|3, 0x2, 0x10);
-
-	/* Standard local interrupt assignments:
-	 * 		      Type	 Polarity		Trigger			 Bus ID   IRQ	APIC ID	     PIN# */
-	mptable_lintsrc(mc, bus_isa);
-
-	/* There is no extension information... */
-
-	/* Compute the checksums */
-	return mptable_finalize(mc);
-}
-
-unsigned long write_smp_table(unsigned long addr)
-{
-	void *v;
-	v = smp_write_floating_table(addr, 0);
-	return (unsigned long)smp_write_config_table(v);
-}
diff --git a/src/mainboard/ibm/e325/resourcemap.c b/src/mainboard/ibm/e325/resourcemap.c
deleted file mode 100644
index 85aafbf5a7..0000000000
--- a/src/mainboard/ibm/e325/resourcemap.c
+++ /dev/null
@@ -1,271 +0,0 @@
-/*
- * IBM E325 needs a different resource map
- *
- */
-
-static void setup_ibm_e325_resource_map(void)
-{
-	static const unsigned int register_values[] = {
-	/* Careful set limit registers before base registers which contain the enables */
-	/* DRAM Limit i Registers
-	 * F1:0x44 i = 0
-	 * F1:0x4C i = 1
-	 * F1:0x54 i = 2
-	 * F1:0x5C i = 3
-	 * F1:0x64 i = 4
-	 * F1:0x6C i = 5
-	 * F1:0x74 i = 6
-	 * F1:0x7C i = 7
-	 * [ 2: 0] Destination Node ID
-	 *	   000 = Node 0
-	 *	   001 = Node 1
-	 *	   010 = Node 2
-	 *	   011 = Node 3
-	 *	   100 = Node 4
-	 *	   101 = Node 5
-	 *	   110 = Node 6
-	 *	   111 = Node 7
-	 * [ 7: 3] Reserved
-	 * [10: 8] Interleave select
-	 *	   specifies the values of A[14:12] to use with interleave enable.
-	 * [15:11] Reserved
-	 * [31:16] DRAM Limit Address i Bits 39-24
-	 *	   This field defines the upper address bits of a 40 bit  address
-	 *	   that define the end of the DRAM region.
-	 */
-	PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000,
-	PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001,
-	PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002,
-	PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003,
-	PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004,
-	PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005,
-	PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006,
-	PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007,
-	/* DRAM Base i Registers
-	 * F1:0x40 i = 0
-	 * F1:0x48 i = 1
-	 * F1:0x50 i = 2
-	 * F1:0x58 i = 3
-	 * F1:0x60 i = 4
-	 * F1:0x68 i = 5
-	 * F1:0x70 i = 6
-	 * F1:0x78 i = 7
-	 * [ 0: 0] Read Enable
-	 *	   0 = Reads Disabled
-	 *	   1 = Reads Enabled
-	 * [ 1: 1] Write Enable
-	 *	   0 = Writes Disabled
-	 *	   1 = Writes Enabled
-	 * [ 7: 2] Reserved
-	 * [10: 8] Interleave Enable
-	 *	   000 = No interleave
-	 *	   001 = Interleave on A[12] (2 nodes)
-	 *	   010 = reserved
-	 *	   011 = Interleave on A[12] and A[14] (4 nodes)
-	 *	   100 = reserved
-	 *	   101 = reserved
-	 *	   110 = reserved
-	 *	   111 = Interleve on A[12] and A[13] and A[14] (8 nodes)
-	 * [15:11] Reserved
-	 * [13:16] DRAM Base Address i Bits 39-24
-	 *	   This field defines the upper address bits of a 40-bit address
-	 *	   that define the start of the DRAM region.
-	 */
-	PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000,
-	PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000,
-	PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000,
-	PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000,
-	PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000,
-	PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000,
-	PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000,
-	PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000,
-	/* Memory-Mapped I/O Limit i Registers
-	 * F1:0x84 i = 0
-	 * F1:0x8C i = 1
-	 * F1:0x94 i = 2
-	 * F1:0x9C i = 3
-	 * F1:0xA4 i = 4
-	 * F1:0xAC i = 5
-	 * F1:0xB4 i = 6
-	 * F1:0xBC i = 7
-	 * [ 2: 0] Destination Node ID
-	 *	   000 = Node 0
-	 *	   001 = Node 1
-	 *	   010 = Node 2
-	 *	   011 = Node 3
-	 *	   100 = Node 4
-	 *	   101 = Node 5
-	 *	   110 = Node 6
-	 *	   111 = Node 7
-	 * [ 3: 3] Reserved
-	 * [ 5: 4] Destination Link ID
-	 *	   00 = Link 0
-	 *	   01 = Link 1
-	 *	   10 = Link 2
-	 *	   11 = Reserved
-	 * [ 6: 6] Reserved
-	 * [ 7: 7] Non-Posted
-	 *	   0 = CPU writes may be posted
-	 *	   1 = CPU writes must be non-posted
-	 * [31: 8] Memory-Mapped I/O Limit Address i (39-16)
-	 *	   This field defines the upp adddress bits of a 40-bit address that
-	 *	   defines the end of a memory-mapped I/O region n
-	 */
-	/* Memory-Mapped I/O Base i Registers
-	 * F1:0x80 i = 0
-	 * F1:0x88 i = 1
-	 * F1:0x90 i = 2
-	 * F1:0x98 i = 3
-	 * F1:0xA0 i = 4
-	 * F1:0xA8 i = 5
-	 * F1:0xB0 i = 6
-	 * F1:0xB8 i = 7
-	 * [ 0: 0] Read Enable
-	 *	   0 = Reads disabled
-	 *	   1 = Reads Enabled
-	 * [ 1: 1] Write Enable
-	 *	   0 = Writes disabled
-	 *	   1 = Writes Enabled
-	 * [ 2: 2] Cpu Disable
-	 *	   0 = Cpu can use this I/O range
-	 *	   1 = Cpu requests do not use this I/O range
-	 * [ 3: 3] Lock
-	 *	   0 = base/limit registers i are read/write
-	 *	   1 = base/limit registers i are read-only
-	 * [ 7: 4] Reserved
-	 * [31: 8] Memory-Mapped I/O Base Address i (39-16)
-	 *	   This field defines the upper address bits of a 40bit address
-	 *	   that defines the start of memory-mapped I/O region i
-	 */
-
-	PCI_ADDR(0, 0x18, 1, 0xbc), 0x48, 0xfe2f10,
-	PCI_ADDR(0, 0x18, 1, 0xb8), 0xf0, 0xfc0003,
-	//PCI_ADDR(0, 0x18, 1, 0xbc), 0x48, 0x0,
-	// PCI_ADDR(0, 0x18, 1, 0xb8), 0xf0, 0x0,
-
-	PCI_ADDR(0, 0x18, 1, 0xb4), 0x48, 0xfec010,
-	PCI_ADDR(0, 0x18, 1, 0xb0), 0xf0, 0xfec003,
-	//PCI_ADDR(0, 0x18, 1, 0xb4), 0x48, 0x0,
-	//PCI_ADDR(0, 0x18, 1, 0xb0), 0xf0, 0x0,
-
-	PCI_ADDR(0, 0x18, 1, 0xac), 0x48, 0xb10,
-	PCI_ADDR(0, 0x18, 1, 0xa8), 0xf0, 0xa03,
-	//PCI_ADDR(0, 0x18, 1, 0xac), 0x48, 0x0,
-	//PCI_ADDR(0, 0x18, 1, 0xa8), 0xf0, 0x0,
-
-	PCI_ADDR(0, 0x18, 1, 0xa4), 0x48, 0xfed010,
-	PCI_ADDR(0, 0x18, 1, 0xa0), 0xf0, 0xfed003,
-	//PCI_ADDR(0, 0x18, 1, 0xa4), 0x48, 0x0,
-	//PCI_ADDR(0, 0x18, 1, 0xa0), 0xf0, 0x0,
-
-	PCI_ADDR(0, 0x18, 1, 0x9c), 0x48, 0x0,
-	PCI_ADDR(0, 0x18, 1, 0x98), 0xf0, 0x0,
-	PCI_ADDR(0, 0x18, 1, 0x94), 0x48, 0x0,
-	PCI_ADDR(0, 0x18, 1, 0x90), 0xf0, 0x0,
-	PCI_ADDR(0, 0x18, 1, 0x8c), 0x48, 0x0,
-	PCI_ADDR(0, 0x18, 1, 0x88), 0xf0, 0x0,
-	PCI_ADDR(0, 0x18, 1, 0x84), 0x48, 0x0,
-	PCI_ADDR(0, 0x18, 1, 0x80), 0xf0, 0x0,
-	/* PCI I/O Limit i Registers
-	 * F1:0xC4 i = 0
-	 * F1:0xCC i = 1
-	 * F1:0xD4 i = 2
-	 * F1:0xDC i = 3
-	 * [ 2: 0] Destination Node ID
-	 *	   000 = Node 0
-	 *	   001 = Node 1
-	 *	   010 = Node 2
-	 *	   011 = Node 3
-	 *	   100 = Node 4
-	 *	   101 = Node 5
-	 *	   110 = Node 6
-	 *	   111 = Node 7
-	 * [ 3: 3] Reserved
-	 * [ 5: 4] Destination Link ID
-	 *	   00 = Link 0
-	 *	   01 = Link 1
-	 *	   10 = Link 2
-	 *	   11 = reserved
-	 * [11: 6] Reserved
-	 * [24:12] PCI I/O Limit Address i
-	 *	   This field defines the end of PCI I/O region n
-	 * [31:25] Reserved
-	 */
-	/* PCI I/O Base i Registers
-	 * F1:0xC0 i = 0
-	 * F1:0xC8 i = 1
-	 * F1:0xD0 i = 2
-	 * F1:0xD8 i = 3
-	 * [ 0: 0] Read Enable
-	 *	   0 = Reads Disabled
-	 *	   1 = Reads Enabled
-	 * [ 1: 1] Write Enable
-	 *	   0 = Writes Disabled
-	 *	   1 = Writes Enabled
-	 * [ 3: 2] Reserved
-	 * [ 4: 4] VGA Enable
-	 *	   0 = VGA matches Disabled
-	 *	   1 = matches all address < 64K and where A[9:0] is in the
-	 *	       range 3B0-3BB or 3C0-3DF independen of the base & limit registers
-	 * [ 5: 5] ISA Enable
-	 *	   0 = ISA matches Disabled
-	 *	   1 = Blocks address < 64K and in the last 768 bytes of eack 1K block
-	 *	       from matching agains this base/limit pair
-	 * [11: 6] Reserved
-	 * [24:12] PCI I/O Base i
-	 *	   This field defines the start of PCI I/O region n
-	 * [31:25] Reserved
-	 */
-	PCI_ADDR(0, 0x18, 1, 0xdc), 0xFE000FC8, 0x1fff010,
-	PCI_ADDR(0, 0x18, 1, 0xd8), 0xFE000FCC, 0x33,
-	PCI_ADDR(0, 0x18, 1, 0xd4), 0xFE000FC8, 0x0,
-	PCI_ADDR(0, 0x18, 1, 0xd0), 0xFE000FCC, 0x0,
-	PCI_ADDR(0, 0x18, 1, 0xcc), 0xFE000FC8, 0x0,
-	PCI_ADDR(0, 0x18, 1, 0xc8), 0xFE000FCC, 0x0,
-	PCI_ADDR(0, 0x18, 1, 0xc4), 0xFE000FC8, 0x0,
-	PCI_ADDR(0, 0x18, 1, 0xc0), 0xFE000FCC, 0x0,
-	/* Config Base and Limit i Registers
-	 * F1:0xE0 i = 0
-	 * F1:0xE4 i = 1
-	 * F1:0xE8 i = 2
-	 * F1:0xEC i = 3
-	 * [ 0: 0] Read Enable
-	 *	   0 = Reads Disabled
-	 *	   1 = Reads Enabled
-	 * [ 1: 1] Write Enable
-	 *	   0 = Writes Disabled
-	 *	   1 = Writes Enabled
-	 * [ 2: 2] Device Number Compare Enable
-	 *	   0 = The ranges are based on bus number
-	 *	   1 = The ranges are ranges of devices on bus 0
-	 * [ 3: 3] Reserved
-	 * [ 6: 4] Destination Node
-	 *	   000 = Node 0
-	 *	   001 = Node 1
-	 *	   010 = Node 2
-	 *	   011 = Node 3
-	 *	   100 = Node 4
-	 *	   101 = Node 5
-	 *	   110 = Node 6
-	 *	   111 = Node 7
-	 * [ 7: 7] Reserved
-	 * [ 9: 8] Destination Link
-	 *	   00 = Link 0
-	 *	   01 = Link 1
-	 *	   10 = Link 2
-	 *	   11 - Reserved
-	 * [15:10] Reserved
-	 * [23:16] Bus Number Base i
-	 *	   This field defines the lowest bus number in configuration region i
-	 * [31:24] Bus Number Limit i
-	 *	   This field defines the highest bus number in configuration regin i
-	 */
-	PCI_ADDR(0, 0x18, 1, 0xe0), 0x0000FC88, 0xff040103,
-	PCI_ADDR(0, 0x18, 1, 0xe4), 0x0000FC88, 0,
-	PCI_ADDR(0, 0x18, 1, 0xe8), 0x0000FC88, 0,
-	PCI_ADDR(0, 0x18, 1, 0xec), 0x0000FC88, 0,
-        };
-        int max;
-        max = ARRAY_SIZE(register_values);
-        setup_resource_map(register_values, max);
-}
diff --git a/src/mainboard/ibm/e325/romstage.c b/src/mainboard/ibm/e325/romstage.c
deleted file mode 100644
index 48e7de83b1..0000000000
--- a/src/mainboard/ibm/e325/romstage.c
+++ /dev/null
@@ -1,119 +0,0 @@
-#include <stdint.h>
-#include <string.h>
-#include <device/pci_def.h>
-#include <arch/io.h>
-#include <device/pnp_def.h>
-#include <stdlib.h>
-#include <pc80/mc146818rtc.h>
-#include <console/console.h>
-#include <cpu/amd/model_fxx_rev.h>
-#include "northbridge/amd/amdk8/incoherent_ht.c"
-#include "southbridge/amd/amd8111/early_smbus.c"
-#include <northbridge/amd/amdk8/raminit.h>
-#include <delay.h>
-#include "northbridge/amd/amdk8/reset_test.c"
-#include "northbridge/amd/amdk8/debug.c"
-#include <superio/nsc/pc87366/pc87366.h>
-#include <cpu/x86/bist.h>
-#include "northbridge/amd/amdk8/setup_resource_map.c"
-#include <spd.h>
-#include "southbridge/amd/amd8111/early_ctrl.c"
-
-#define SERIAL_DEV PNP_DEV(0x2e, PC87366_SP1)
-
-static void memreset_setup(void)
-{
-	if (is_cpu_pre_c0()) {
-		/* Set the memreset low. */
-		outb((1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16);
-		/* Ensure the BIOS has control of the memory lines. */
-		outb((1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17);
-	} else {
-		/* Ensure the CPU has control of the memory lines. */
-		outb((1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17);
-	}
-}
-
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
-	if (is_cpu_pre_c0()) {
-		udelay(800);
-		/* Set memreset high. */
-		outb((1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16);
-		udelay(90);
-	}
-}
-
-static void activate_spd_rom(const struct mem_controller *ctrl) { }
-
-static inline int spd_read_byte(unsigned device, unsigned address)
-{
-	return smbus_read_byte(device, address);
-}
-
-#include "northbridge/amd/amdk8/raminit.c"
-#include "resourcemap.c"
-#include "northbridge/amd/amdk8/coherent_ht.c"
-#include "lib/generic_sdram.c"
-#include "cpu/amd/dualcore/dualcore.c"
-#include "cpu/amd/model_fxx/init_cpus.c"
-
-void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
-	static const struct mem_controller cpu[] = {
-		{
-			.node_id = 0,
-			.f0 = PCI_DEV(0, 0x18, 0),
-			.f1 = PCI_DEV(0, 0x18, 1),
-			.f2 = PCI_DEV(0, 0x18, 2),
-			.f3 = PCI_DEV(0, 0x18, 3),
-			.channel0 = { DIMM0, DIMM2, 0, 0 },
-			.channel1 = { DIMM1, DIMM3, 0, 0 },
-		},
-#if CONFIG_MAX_PHYSICAL_CPUS > 1
-		{
-			.node_id = 1,
-			.f0 = PCI_DEV(0, 0x19, 0),
-			.f1 = PCI_DEV(0, 0x19, 1),
-			.f2 = PCI_DEV(0, 0x19, 2),
-			.f3 = PCI_DEV(0, 0x19, 3),
-			.channel0 = { DIMM4, DIMM6, 0, 0 },
-			.channel1 = { DIMM5, DIMM7, 0, 0 },
-		},
-#endif
-	};
-
-        int needs_reset;
-
-        if (bist == 0)
-		init_cpus(cpu_init_detectedx);
-
-	pc87366_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
-        console_init();
-
-	/* Halt if there was a built in self test failure */
-	report_bist_failure(bist);
-
-        setup_ibm_e325_resource_map();
-
-	needs_reset = setup_coherent_ht_domain();
-
-#if CONFIG_LOGICAL_CPUS
-        // It is said that we should start core1 after all core0 launched
-        start_other_cores();
-#endif
-        // automatically set that for you, but you might meet tight space
-        needs_reset |= ht_setup_chains_x();
-
-       	if (needs_reset) {
-               	printk(BIOS_INFO, "ht reset -\n");
-               	soft_reset();
-       	}
-
-	enable_smbus();
-
-	memreset_setup();
-	sdram_initialize(ARRAY_SIZE(cpu), cpu);
-
-	post_cache_as_ram();
-}
diff --git a/src/mainboard/ibm/e326/Kconfig b/src/mainboard/ibm/e326/Kconfig
deleted file mode 100644
index bd2bb26c6f..0000000000
--- a/src/mainboard/ibm/e326/Kconfig
+++ /dev/null
@@ -1,58 +0,0 @@
-if BOARD_IBM_E326
-
-config BOARD_SPECIFIC_OPTIONS # dummy
-	def_bool y
-	select CPU_AMD_SOCKET_940
-	select NORTHBRIDGE_AMD_AMDK8
-	select SOUTHBRIDGE_AMD_AMD8111
-	select SOUTHBRIDGE_AMD_AMD8131
-	select SUPERIO_NSC_PC87366
-	select PARALLEL_CPU_INIT
-	select HAVE_OPTION_TABLE
-	select HAVE_PIRQ_TABLE
-	select HAVE_MP_TABLE
-	select SB_HT_CHAIN_UNITID_OFFSET_ONLY
-	select BOARD_ROMSIZE_KB_512
-	select QRANK_DIMM_SUPPORT
-
-config MAINBOARD_DIR
-	string
-	default ibm/e326
-
-config DCACHE_RAM_BASE
-	hex
-	default 0xcf000
-
-config DCACHE_RAM_SIZE
-	hex
-	default 0x1000
-
-config APIC_ID_OFFSET
-	hex
-	default 0x0
-
-config MAINBOARD_PART_NUMBER
-	string
-	default "eServer 326"
-
-config MAX_CPUS
-	int
-	default 2
-
-config MAX_PHYSICAL_CPUS
-	int
-	default 2
-
-config HT_CHAIN_END_UNITID_BASE
-	hex
-	default 0x20
-
-config HT_CHAIN_UNITID_BASE
-	hex
-	default 0x1
-
-config IRQ_SLOT_COUNT
-	int
-	default 12
-
-endif # BOARD_IBM_E326
diff --git a/src/mainboard/ibm/e326/Kconfig.name b/src/mainboard/ibm/e326/Kconfig.name
deleted file mode 100644
index 138fd5174d..0000000000
--- a/src/mainboard/ibm/e326/Kconfig.name
+++ /dev/null
@@ -1,2 +0,0 @@
-config BOARD_IBM_E326
-	bool "eServer 326"
diff --git a/src/mainboard/ibm/e326/board_info.txt b/src/mainboard/ibm/e326/board_info.txt
deleted file mode 100644
index af5631ef6b..0000000000
--- a/src/mainboard/ibm/e326/board_info.txt
+++ /dev/null
@@ -1,2 +0,0 @@
-Category: server
-Board URL: http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=ibm&lndocid=MIGR-58655
diff --git a/src/mainboard/ibm/e326/cmos.layout b/src/mainboard/ibm/e326/cmos.layout
deleted file mode 100644
index 4e081ea1aa..0000000000
--- a/src/mainboard/ibm/e326/cmos.layout
+++ /dev/null
@@ -1,60 +0,0 @@
-entries
-
-0          384       r       0        reserved_memory
-384          1       e       4        boot_option
-388          4       r       0        reboot_bits
-392          3       e       5        baud_rate
-395          1       e       1        hw_scrubber
-396          1       e       1        interleave_chip_selects
-397          2       e       8        max_mem_clock
-399          1       e       2        multi_core
-400          1       e       1        power_on_after_fail
-412          4       e       6        debug_level
-440          4       e       9        slow_cpu
-444          1       e       1        nmi
-445          1       e       1        iommu
-456          1       e       1        ECC_memory
-728        256       h       0        user_data
-984         16       h       0        check_sum
-# Reserve the extended AMD configuration registers
-1000        24       r       0        amd_reserved
-
-
-
-enumerations
-
-#ID value   text
-1     0     Disable
-1     1     Enable
-2     0     Enable
-2     1     Disable
-4     0     Fallback
-4     1     Normal
-5     0     115200
-5     1     57600
-5     2     38400
-5     3     19200
-5     4     9600
-5     5     4800
-5     6     2400
-5     7     1200
-6     6     Notice
-6     7     Info
-6     8     Debug
-6     9     Spew
-8     0     DDR400
-8     1     DDR333
-8     2     DDR266
-8     3     DDR200
-9     0     off
-9     1     87.5%
-9     2     75.0%
-9     3     62.5%
-9     4     50.0%
-9     5     37.5%
-9     6     25.0%
-9     7     12.5%
-
-checksums
-
-checksum 392 983 984
diff --git a/src/mainboard/ibm/e326/devicetree.cb b/src/mainboard/ibm/e326/devicetree.cb
deleted file mode 100644
index 32d04a7fa9..0000000000
--- a/src/mainboard/ibm/e326/devicetree.cb
+++ /dev/null
@@ -1,73 +0,0 @@
-chip northbridge/amd/amdk8/root_complex
-	device cpu_cluster 0 on
-		chip cpu/amd/socket_940
-			device lapic 0 on end
-		end
-	end
-
-	device domain 0 on
-		chip northbridge/amd/amdk8
-			device pci 18.0 on end # LDT 0
-			device pci 18.0 on     # LDT 1
-				chip southbridge/amd/amd8131
-					device pci 0.0 on end
-					device pci 0.1 on end
-					device pci 1.0 on end
-					device pci 1.1 on end
-				end
-				chip southbridge/amd/amd8111
-					device pci 0.0 on
-						device pci 0.0 on end
-						device pci 0.1 on end
-						device pci 0.2 on end
-						device pci 1.0 off end
-                                               device pci 5.0 on end # ATI Rage XL
-					end
-					device pci 1.0 on
-						chip superio/nsc/pc87366
-							device	pnp 2e.0 off  # Floppy
-								 io 0x60 = 0x3f0
-								irq 0x70 = 6
-								drq 0x74 = 2
-							end
-							device pnp 2e.1 off  # Parallel Port
-								 io 0x60 = 0x378
-								irq 0x70 = 7
-							end
-							device pnp 2e.2 off # Com 2
-								 io 0x60 = 0x2f8
-								irq 0x70 = 3
-							end
-							device pnp 2e.3 on  # Com 1
-								 io 0x60 = 0x3f8
-								irq 0x70 = 4
-							end
-							device pnp 2e.4 off end # SWC
-							device pnp 2e.5 off end # Mouse
-							device pnp 2e.6 on  # Keyboard
-								 io 0x60 = 0x60
-								 io 0x62 = 0x64
-								irq 0x70 = 1
-							end
-							device pnp 2e.7 off end # GPIO
-							device pnp 2e.8 off end # ACB
-							device pnp 2e.9 off end # FSCM
-							device pnp 2e.a off end # WDT
-						end
-					end
-					device pci 1.1 on end
-					device pci 1.2 on end
-					device pci 1.3 on end
-					device pci 1.5 off end
-					device pci 1.6 off end
-					register "ide0_enable" = "1"
-					register "ide1_enable" = "1"
-				end
-			end #  device pci 18.0
-			device pci 18.0 on end # LDT2
-			device pci 18.1 on end
-			device pci 18.2 on end
-			device pci 18.3 on end
-		end
-	end
-end
diff --git a/src/mainboard/ibm/e326/irq_tables.c b/src/mainboard/ibm/e326/irq_tables.c
deleted file mode 100644
index 24987b7e00..0000000000
--- a/src/mainboard/ibm/e326/irq_tables.c
+++ /dev/null
@@ -1,60 +0,0 @@
-#include <arch/pirq_routing.h>
-#include <device/pci.h>
-
-#define IRQ_ROUTER_BUS		0
-#define IRQ_ROUTER_DEVFN	PCI_DEVFN(4,3)
-#define IRQ_ROUTER_VENDOR	0x1022
-#define IRQ_ROUTER_DEVICE	0x746b
-
-#define AVAILABLE_IRQS 0xdef8
-#define IRQ_SLOT(slot, bus, dev, fn, linka, linkb, linkc, linkd) \
-	{ bus, (dev<<3)|fn, {{ linka, AVAILABLE_IRQS}, { linkb, AVAILABLE_IRQS}, \
-	{linkc, AVAILABLE_IRQS}, {linkd, AVAILABLE_IRQS}}, slot, 0}
-
-/*  Each IRQ_SLOT entry consists of:
- *  bus, devfn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu
- */
-
-static const struct irq_routing_table intel_irq_routing_table = {
-	PIRQ_SIGNATURE,		/* u32 signature */
-	PIRQ_VERSION,           /* u16 version   */
-	32+16*CONFIG_IRQ_SLOT_COUNT,	/* there can be total CONFIG_IRQ_SLOT_COUNT table entries */
-	IRQ_ROUTER_BUS,		/* Where the interrupt router lies (bus) */
-	IRQ_ROUTER_DEVFN,	/* Where the interrupt router lies (dev) */
-	0x00,			/* IRQs devoted exclusively to PCI usage */
-	IRQ_ROUTER_VENDOR,	/* Vendor */
-	IRQ_ROUTER_DEVICE,	/* Device */
-	0x00,			/* Miniport data */
-	{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */
-	0x34,			/*  u8 checksum , mod 256 checksum must give zero */
-	{	/* slot(0=onboard), devfn, irqlinks (line id, 0=not routed) */
-		/* Northbridge, Node 0 */
-		IRQ_SLOT(0x0, 0x00,0x18,0x0, 0,0,0,0),
-		/* AMD-8131 PCI-X Bridge */
-		IRQ_SLOT(0x0, 0x01,0x01,0x0, 0,0,0,0),
-		/* Onboard LSI SCSI Controller */
-		IRQ_SLOT(0x0, 0x02,0x02,0x0, 3,0,0,0),
-		/* Onboard Broadcom NICs */
-		IRQ_SLOT(0x0, 0x02,0x01,0x0, 1,2,0,0),
-		/* AMD-8131 PCI-X Bridge */
-		IRQ_SLOT(0x0, 0x01,0x02,0x0, 0,0,0,0),
-		/* PCI Slot 1-2 */
-		IRQ_SLOT(0x1, 0x03,0x03,0x0, 1,2,3,4),
-		IRQ_SLOT(0x2, 0x03,0x04,0x0, 2,3,4,1),
-		/* AMD-8111 PCI Bridge */
-		IRQ_SLOT(0x0, 0x01,0x03,0x0, 0,0,0,0),
-		/* USB Controller */
-		IRQ_SLOT(0x0, 0x04,0x00,0x0, 0,0,0,4),
-		/* ATI Rage XL VGA */
-		IRQ_SLOT(0x0, 0x04,0x05,0x0, 1,0,0,0),
-		/* AMD-8111 LPC Dridge */
-		IRQ_SLOT(0x0, 0x01,0x04,0x0, 0,0,0,0),
-		/* Northbridge, Node 1 */
-		IRQ_SLOT(0x0, 0x00,0x19,0x0, 0,0,0,0),
-
-	}
-};
-unsigned long write_pirq_routing_table(unsigned long addr)
-{
-        return copy_pirq_routing_table(addr, &intel_irq_routing_table);
-}
diff --git a/src/mainboard/ibm/e326/mptable.c b/src/mainboard/ibm/e326/mptable.c
deleted file mode 100644
index 46dabd3893..0000000000
--- a/src/mainboard/ibm/e326/mptable.c
+++ /dev/null
@@ -1,132 +0,0 @@
-#include <console/console.h>
-#include <arch/smp/mpspec.h>
-#include <arch/ioapic.h>
-#include <device/pci.h>
-#include <string.h>
-#include <stdint.h>
-
-static void *smp_write_config_table(void *v)
-{
-	struct mp_config_table *mc;
-
-	int bus_isa;
-	unsigned char bus_8111_0;
-	unsigned char bus_8111_1;
-	unsigned char bus_8131_1;
-	unsigned char bus_8131_2;
-
-	mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
-
-	mptable_init(mc, LOCAL_APIC_ADDR);
-
-	smp_write_processors(mc);
-
-	{
-		device_t dev;
-
-		/* 8111 */
-		dev = dev_find_slot(1, PCI_DEVFN(0x03,0));
-		if (dev) {
-                	bus_8111_0 = pci_read_config8(dev, PCI_PRIMARY_BUS);
-			bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
-		} else {
-			printk(BIOS_DEBUG, "ERROR - could not find PCI 1:03.0, using defaults\n");
-			bus_8111_0 = 1;
-			bus_8111_1 = 4;
-		}
-
-		/* 8131-1 */
-		dev = dev_find_slot(1, PCI_DEVFN(0x01,0));
-		if (dev) {
-			bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
-		} else {
-			printk(BIOS_DEBUG, "ERROR - could not find PCI 1:01.0, using defaults\n");
-			bus_8131_1 = 2;
-		}
-
-		/* 8131-2 */
-		dev = dev_find_slot(1, PCI_DEVFN(0x02,0));
-		if (dev) {
-			bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS);
-		} else {
-			printk(BIOS_DEBUG, "ERROR - could not find PCI 1:02.0, using defaults\n");
-			bus_8131_2 = 3;
-		}
-	}
-
-	mptable_write_buses(mc, NULL, &bus_isa);
-
-	/* Legacy IOAPIC #2 */
-	smp_write_ioapic(mc, 2, 0x11, VIO_APIC_VADDR);
-	{
-		device_t dev;
-		struct resource *res;
-		/* 8131-1 apic #3 */
-		dev = dev_find_slot(1, PCI_DEVFN(0x01,1));
-		if (dev) {
-			res = find_resource(dev, PCI_BASE_ADDRESS_0);
-			if (res) {
-				smp_write_ioapic(mc, 0x03, 0x11,
-						 res2mmio(res, 0, 0));
-			}
-		}
-		/* 8131-2 apic #4 */
-		dev = dev_find_slot(1, PCI_DEVFN(0x02,1));
-		if (dev) {
-			res = find_resource(dev, PCI_BASE_ADDRESS_0);
-			if (res) {
-				smp_write_ioapic(mc, 0x04, 0x11,
-						 res2mmio(res, 0, 0));
-			}
-		}
-	}
-
-	mptable_add_isa_interrupts(mc, bus_isa, 0x2, 0);
-
-	/* PCI Ints:	     Type	Polarity    	    Trigger		  	Bus ID      PCIDEVNUM|IRQ  APIC ID PIN# */
-	/* Integrated SMBus 2.0 */
-        smp_write_intsrc(mc, mp_INT,	MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8111_0, (0x04<<2)|3, 0x2, 0x13);
-	/* Integrated AMD AC97 Audio */
-        smp_write_intsrc(mc, mp_INT,    MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8111_0, (0x04<<2)|1, 0x2, 0x11);
-
-	/* Integrated AMD USB */
-        smp_write_intsrc(mc, mp_INT,    MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8111_1, (0x00<<2)|3, 0x2, 0x13);
-
-	/* On board ATI Rage XL */
-	smp_write_intsrc(mc, mp_INT,    MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8111_1, (0x05<<2)|0, 0x2, 0x10);
-
-	/* On board Broadcom nics */
-	smp_write_intsrc(mc, mp_INT,    MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_1, (0x01<<2)|0, 0x3, 0x00);
-	smp_write_intsrc(mc, mp_INT,    MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_1, (0x01<<2)|1, 0x3, 0x01);
-
-	/* On board LSI SCSI */
-	smp_write_intsrc(mc, mp_INT,    MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_1, (0x02<<2)|0, 0x3, 0x02);
-
-	/* PCI Slot 1 PCIX */
-	smp_write_intsrc(mc, mp_INT,    MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_2, (0x03<<2)|0, 0x2, 0x10);
-	smp_write_intsrc(mc, mp_INT,    MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_2, (0x03<<2)|1, 0x2, 0x11);
-	smp_write_intsrc(mc, mp_INT,    MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_2, (0x03<<2)|2, 0x2, 0x12);
-	smp_write_intsrc(mc, mp_INT,    MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_2, (0x03<<2)|3, 0x2, 0x13);
-
-	/* PCI Slot 2 PCIX */
-	smp_write_intsrc(mc, mp_INT,    MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_2, (0x04<<2)|0, 0x2, 0x11);
-	smp_write_intsrc(mc, mp_INT,    MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_2, (0x04<<2)|1, 0x2, 0x12);
-	smp_write_intsrc(mc, mp_INT,    MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_2, (0x04<<2)|2, 0x2, 0x13);
-	smp_write_intsrc(mc, mp_INT,    MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_2, (0x04<<2)|3, 0x2, 0x10);
-
-	/* Standard local interrupt assignments:
-	 * 		      Type	 Polarity		Trigger			 Bus ID   IRQ	APIC ID	     PIN# */
-	mptable_lintsrc(mc, bus_isa);
-
-	/* There is no extension information... */
-
-	/* Compute the checksums */
-	return mptable_finalize(mc);
-}
-
-unsigned long write_smp_table(unsigned long addr)
-{
-	void *v;
-	v = smp_write_floating_table(addr, 0);
-	return (unsigned long)smp_write_config_table(v);
-}
diff --git a/src/mainboard/ibm/e326/resourcemap.c b/src/mainboard/ibm/e326/resourcemap.c
deleted file mode 100644
index 98fdcc0ec6..0000000000
--- a/src/mainboard/ibm/e326/resourcemap.c
+++ /dev/null
@@ -1,271 +0,0 @@
-/*
- * IBM E325 needs a different resource map
- *
- */
-
-static void setup_ibm_e326_resource_map(void)
-{
-	static const unsigned int register_values[] = {
-	/* Careful set limit registers before base registers which contain the enables */
-	/* DRAM Limit i Registers
-	 * F1:0x44 i = 0
-	 * F1:0x4C i = 1
-	 * F1:0x54 i = 2
-	 * F1:0x5C i = 3
-	 * F1:0x64 i = 4
-	 * F1:0x6C i = 5
-	 * F1:0x74 i = 6
-	 * F1:0x7C i = 7
-	 * [ 2: 0] Destination Node ID
-	 *	   000 = Node 0
-	 *	   001 = Node 1
-	 *	   010 = Node 2
-	 *	   011 = Node 3
-	 *	   100 = Node 4
-	 *	   101 = Node 5
-	 *	   110 = Node 6
-	 *	   111 = Node 7
-	 * [ 7: 3] Reserved
-	 * [10: 8] Interleave select
-	 *	   specifies the values of A[14:12] to use with interleave enable.
-	 * [15:11] Reserved
-	 * [31:16] DRAM Limit Address i Bits 39-24
-	 *	   This field defines the upper address bits of a 40 bit  address
-	 *	   that define the end of the DRAM region.
-	 */
-	PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000,
-	PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001,
-	PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002,
-	PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003,
-	PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004,
-	PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005,
-	PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006,
-	PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007,
-	/* DRAM Base i Registers
-	 * F1:0x40 i = 0
-	 * F1:0x48 i = 1
-	 * F1:0x50 i = 2
-	 * F1:0x58 i = 3
-	 * F1:0x60 i = 4
-	 * F1:0x68 i = 5
-	 * F1:0x70 i = 6
-	 * F1:0x78 i = 7
-	 * [ 0: 0] Read Enable
-	 *	   0 = Reads Disabled
-	 *	   1 = Reads Enabled
-	 * [ 1: 1] Write Enable
-	 *	   0 = Writes Disabled
-	 *	   1 = Writes Enabled
-	 * [ 7: 2] Reserved
-	 * [10: 8] Interleave Enable
-	 *	   000 = No interleave
-	 *	   001 = Interleave on A[12] (2 nodes)
-	 *	   010 = reserved
-	 *	   011 = Interleave on A[12] and A[14] (4 nodes)
-	 *	   100 = reserved
-	 *	   101 = reserved
-	 *	   110 = reserved
-	 *	   111 = Interleve on A[12] and A[13] and A[14] (8 nodes)
-	 * [15:11] Reserved
-	 * [13:16] DRAM Base Address i Bits 39-24
-	 *	   This field defines the upper address bits of a 40-bit address
-	 *	   that define the start of the DRAM region.
-	 */
-	PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000,
-	PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000,
-	PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000,
-	PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000,
-	PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000,
-	PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000,
-	PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000,
-	PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000,
-	/* Memory-Mapped I/O Limit i Registers
-	 * F1:0x84 i = 0
-	 * F1:0x8C i = 1
-	 * F1:0x94 i = 2
-	 * F1:0x9C i = 3
-	 * F1:0xA4 i = 4
-	 * F1:0xAC i = 5
-	 * F1:0xB4 i = 6
-	 * F1:0xBC i = 7
-	 * [ 2: 0] Destination Node ID
-	 *	   000 = Node 0
-	 *	   001 = Node 1
-	 *	   010 = Node 2
-	 *	   011 = Node 3
-	 *	   100 = Node 4
-	 *	   101 = Node 5
-	 *	   110 = Node 6
-	 *	   111 = Node 7
-	 * [ 3: 3] Reserved
-	 * [ 5: 4] Destination Link ID
-	 *	   00 = Link 0
-	 *	   01 = Link 1
-	 *	   10 = Link 2
-	 *	   11 = Reserved
-	 * [ 6: 6] Reserved
-	 * [ 7: 7] Non-Posted
-	 *	   0 = CPU writes may be posted
-	 *	   1 = CPU writes must be non-posted
-	 * [31: 8] Memory-Mapped I/O Limit Address i (39-16)
-	 *	   This field defines the upp adddress bits of a 40-bit address that
-	 *	   defines the end of a memory-mapped I/O region n
-	 */
-	/* Memory-Mapped I/O Base i Registers
-	 * F1:0x80 i = 0
-	 * F1:0x88 i = 1
-	 * F1:0x90 i = 2
-	 * F1:0x98 i = 3
-	 * F1:0xA0 i = 4
-	 * F1:0xA8 i = 5
-	 * F1:0xB0 i = 6
-	 * F1:0xB8 i = 7
-	 * [ 0: 0] Read Enable
-	 *	   0 = Reads disabled
-	 *	   1 = Reads Enabled
-	 * [ 1: 1] Write Enable
-	 *	   0 = Writes disabled
-	 *	   1 = Writes Enabled
-	 * [ 2: 2] Cpu Disable
-	 *	   0 = Cpu can use this I/O range
-	 *	   1 = Cpu requests do not use this I/O range
-	 * [ 3: 3] Lock
-	 *	   0 = base/limit registers i are read/write
-	 *	   1 = base/limit registers i are read-only
-	 * [ 7: 4] Reserved
-	 * [31: 8] Memory-Mapped I/O Base Address i (39-16)
-	 *	   This field defines the upper address bits of a 40bit address
-	 *	   that defines the start of memory-mapped I/O region i
-	 */
-
-	PCI_ADDR(0, 0x18, 1, 0xbc), 0x48, 0xfe2f10,
-	PCI_ADDR(0, 0x18, 1, 0xb8), 0xf0, 0xfc0003,
-	//PCI_ADDR(0, 0x18, 1, 0xbc), 0x48, 0x0,
-	// PCI_ADDR(0, 0x18, 1, 0xb8), 0xf0, 0x0,
-
-	PCI_ADDR(0, 0x18, 1, 0xb4), 0x48, 0xfec010,
-	PCI_ADDR(0, 0x18, 1, 0xb0), 0xf0, 0xfec003,
-	//PCI_ADDR(0, 0x18, 1, 0xb4), 0x48, 0x0,
-	//PCI_ADDR(0, 0x18, 1, 0xb0), 0xf0, 0x0,
-
-	PCI_ADDR(0, 0x18, 1, 0xac), 0x48, 0xb10,
-	PCI_ADDR(0, 0x18, 1, 0xa8), 0xf0, 0xa03,
-	//PCI_ADDR(0, 0x18, 1, 0xac), 0x48, 0x0,
-	//PCI_ADDR(0, 0x18, 1, 0xa8), 0xf0, 0x0,
-
-	PCI_ADDR(0, 0x18, 1, 0xa4), 0x48, 0xfed010,
-	PCI_ADDR(0, 0x18, 1, 0xa0), 0xf0, 0xfed003,
-	//PCI_ADDR(0, 0x18, 1, 0xa4), 0x48, 0x0,
-	//PCI_ADDR(0, 0x18, 1, 0xa0), 0xf0, 0x0,
-
-	PCI_ADDR(0, 0x18, 1, 0x9c), 0x48, 0x0,
-	PCI_ADDR(0, 0x18, 1, 0x98), 0xf0, 0x0,
-	PCI_ADDR(0, 0x18, 1, 0x94), 0x48, 0x0,
-	PCI_ADDR(0, 0x18, 1, 0x90), 0xf0, 0x0,
-	PCI_ADDR(0, 0x18, 1, 0x8c), 0x48, 0x0,
-	PCI_ADDR(0, 0x18, 1, 0x88), 0xf0, 0x0,
-	PCI_ADDR(0, 0x18, 1, 0x84), 0x48, 0x0,
-	PCI_ADDR(0, 0x18, 1, 0x80), 0xf0, 0x0,
-	/* PCI I/O Limit i Registers
-	 * F1:0xC4 i = 0
-	 * F1:0xCC i = 1
-	 * F1:0xD4 i = 2
-	 * F1:0xDC i = 3
-	 * [ 2: 0] Destination Node ID
-	 *	   000 = Node 0
-	 *	   001 = Node 1
-	 *	   010 = Node 2
-	 *	   011 = Node 3
-	 *	   100 = Node 4
-	 *	   101 = Node 5
-	 *	   110 = Node 6
-	 *	   111 = Node 7
-	 * [ 3: 3] Reserved
-	 * [ 5: 4] Destination Link ID
-	 *	   00 = Link 0
-	 *	   01 = Link 1
-	 *	   10 = Link 2
-	 *	   11 = reserved
-	 * [11: 6] Reserved
-	 * [24:12] PCI I/O Limit Address i
-	 *	   This field defines the end of PCI I/O region n
-	 * [31:25] Reserved
-	 */
-	/* PCI I/O Base i Registers
-	 * F1:0xC0 i = 0
-	 * F1:0xC8 i = 1
-	 * F1:0xD0 i = 2
-	 * F1:0xD8 i = 3
-	 * [ 0: 0] Read Enable
-	 *	   0 = Reads Disabled
-	 *	   1 = Reads Enabled
-	 * [ 1: 1] Write Enable
-	 *	   0 = Writes Disabled
-	 *	   1 = Writes Enabled
-	 * [ 3: 2] Reserved
-	 * [ 4: 4] VGA Enable
-	 *	   0 = VGA matches Disabled
-	 *	   1 = matches all address < 64K and where A[9:0] is in the
-	 *	       range 3B0-3BB or 3C0-3DF independen of the base & limit registers
-	 * [ 5: 5] ISA Enable
-	 *	   0 = ISA matches Disabled
-	 *	   1 = Blocks address < 64K and in the last 768 bytes of eack 1K block
-	 *	       from matching agains this base/limit pair
-	 * [11: 6] Reserved
-	 * [24:12] PCI I/O Base i
-	 *	   This field defines the start of PCI I/O region n
-	 * [31:25] Reserved
-	 */
-	PCI_ADDR(0, 0x18, 1, 0xdc), 0xFE000FC8, 0x1fff010,
-	PCI_ADDR(0, 0x18, 1, 0xd8), 0xFE000FCC, 0x33,
-	PCI_ADDR(0, 0x18, 1, 0xd4), 0xFE000FC8, 0x0,
-	PCI_ADDR(0, 0x18, 1, 0xd0), 0xFE000FCC, 0x0,
-	PCI_ADDR(0, 0x18, 1, 0xcc), 0xFE000FC8, 0x0,
-	PCI_ADDR(0, 0x18, 1, 0xc8), 0xFE000FCC, 0x0,
-	PCI_ADDR(0, 0x18, 1, 0xc4), 0xFE000FC8, 0x0,
-	PCI_ADDR(0, 0x18, 1, 0xc0), 0xFE000FCC, 0x0,
-	/* Config Base and Limit i Registers
-	 * F1:0xE0 i = 0
-	 * F1:0xE4 i = 1
-	 * F1:0xE8 i = 2
-	 * F1:0xEC i = 3
-	 * [ 0: 0] Read Enable
-	 *	   0 = Reads Disabled
-	 *	   1 = Reads Enabled
-	 * [ 1: 1] Write Enable
-	 *	   0 = Writes Disabled
-	 *	   1 = Writes Enabled
-	 * [ 2: 2] Device Number Compare Enable
-	 *	   0 = The ranges are based on bus number
-	 *	   1 = The ranges are ranges of devices on bus 0
-	 * [ 3: 3] Reserved
-	 * [ 6: 4] Destination Node
-	 *	   000 = Node 0
-	 *	   001 = Node 1
-	 *	   010 = Node 2
-	 *	   011 = Node 3
-	 *	   100 = Node 4
-	 *	   101 = Node 5
-	 *	   110 = Node 6
-	 *	   111 = Node 7
-	 * [ 7: 7] Reserved
-	 * [ 9: 8] Destination Link
-	 *	   00 = Link 0
-	 *	   01 = Link 1
-	 *	   10 = Link 2
-	 *	   11 - Reserved
-	 * [15:10] Reserved
-	 * [23:16] Bus Number Base i
-	 *	   This field defines the lowest bus number in configuration region i
-	 * [31:24] Bus Number Limit i
-	 *	   This field defines the highest bus number in configuration regin i
-	 */
-	PCI_ADDR(0, 0x18, 1, 0xe0), 0x0000FC88, 0xff040103,
-	PCI_ADDR(0, 0x18, 1, 0xe4), 0x0000FC88, 0,
-	PCI_ADDR(0, 0x18, 1, 0xe8), 0x0000FC88, 0,
-	PCI_ADDR(0, 0x18, 1, 0xec), 0x0000FC88, 0,
-        };
-        int max;
-        max = ARRAY_SIZE(register_values);
-        setup_resource_map(register_values, max);
-}
diff --git a/src/mainboard/ibm/e326/romstage.c b/src/mainboard/ibm/e326/romstage.c
deleted file mode 100644
index a27a2189b5..0000000000
--- a/src/mainboard/ibm/e326/romstage.c
+++ /dev/null
@@ -1,119 +0,0 @@
-#include <stdint.h>
-#include <string.h>
-#include <device/pci_def.h>
-#include <arch/io.h>
-#include <device/pnp_def.h>
-#include <stdlib.h>
-#include <pc80/mc146818rtc.h>
-#include <console/console.h>
-#include <cpu/amd/model_fxx_rev.h>
-#include "northbridge/amd/amdk8/incoherent_ht.c"
-#include "southbridge/amd/amd8111/early_smbus.c"
-#include <northbridge/amd/amdk8/raminit.h>
-#include <delay.h>
-#include "northbridge/amd/amdk8/reset_test.c"
-#include "northbridge/amd/amdk8/debug.c"
-#include <superio/nsc/pc87366/pc87366.h>
-#include <cpu/x86/bist.h>
-#include "northbridge/amd/amdk8/setup_resource_map.c"
-#include "southbridge/amd/amd8111/early_ctrl.c"
-#include <spd.h>
-
-#define SERIAL_DEV PNP_DEV(0x2e, PC87366_SP1)
-
-static void memreset_setup(void)
-{
-	if (is_cpu_pre_c0()) {
-		/* Set the memreset low. */
-		outb((1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16);
-		/* Ensure the BIOS has control of the memory lines. */
-		outb((1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17);
-	} else {
-		/* Ensure the CPU has control of the memory lines. */
-		outb((1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17);
-	}
-}
-
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
-	if (is_cpu_pre_c0()) {
-		udelay(800);
-		/* Set memreset high. */
-		outb((1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16);
-		udelay(90);
-	}
-}
-
-static void activate_spd_rom(const struct mem_controller *ctrl) { }
-
-static inline int spd_read_byte(unsigned device, unsigned address)
-{
-	return smbus_read_byte(device, address);
-}
-
-#include "northbridge/amd/amdk8/raminit.c"
-#include "resourcemap.c"
-#include "northbridge/amd/amdk8/coherent_ht.c"
-#include "lib/generic_sdram.c"
-#include "cpu/amd/dualcore/dualcore.c"
-#include "cpu/amd/model_fxx/init_cpus.c"
-
-void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
-	static const struct mem_controller cpu[] = {
-		{
-			.node_id = 0,
-			.f0 = PCI_DEV(0, 0x18, 0),
-			.f1 = PCI_DEV(0, 0x18, 1),
-			.f2 = PCI_DEV(0, 0x18, 2),
-			.f3 = PCI_DEV(0, 0x18, 3),
-			.channel0 = { DIMM0, DIMM2, 0, 0 },
-			.channel1 = { DIMM1, DIMM3, 0, 0 },
-		},
-#if CONFIG_MAX_PHYSICAL_CPUS > 1
-		{
-			.node_id = 1,
-			.f0 = PCI_DEV(0, 0x19, 0),
-			.f1 = PCI_DEV(0, 0x19, 1),
-			.f2 = PCI_DEV(0, 0x19, 2),
-			.f3 = PCI_DEV(0, 0x19, 3),
-			.channel0 = { DIMM4, DIMM6, 0, 0 },
-			.channel1 = { DIMM5, DIMM7, 0, 0 },
-		},
-#endif
-	};
-
-        int needs_reset;
-
-        if (bist == 0)
-		init_cpus(cpu_init_detectedx);
-
-	pc87366_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
-        console_init();
-
-	/* Halt if there was a built in self test failure */
-	report_bist_failure(bist);
-
-        setup_ibm_e326_resource_map();
-
-	needs_reset = setup_coherent_ht_domain();
-
-#if CONFIG_LOGICAL_CPUS
-        // It is said that we should start core1 after all core0 launched
-        start_other_cores();
-#endif
-        // automatically set that for you, but you might meet tight space
-        needs_reset |= ht_setup_chains_x();
-
-       	if (needs_reset) {
-               	printk(BIOS_INFO, "ht reset -\n");
-               	soft_reset();
-       	}
-
-	enable_smbus();
-
-	memreset_setup();
-	sdram_initialize(ARRAY_SIZE(cpu), cpu);
-
-	post_cache_as_ram();
-}