tegra132: Pass panel spec to lib_sysinfo

panel spec such as resoultion, bits per pixel are
needed to pass to depthcharge/payload for displaying
bitmap onto panel.

Enable display code only if mainboard selects
MAINBOARD_DO_NATIVE_VGA_INIT. Otherwise build breaks for
boards that do not support display init yet.

BRANCH=none
BUG=chrome-os-partner:31936
TEST=Compiles for both rush and ryu. Display comes up for ryu in both normal and
dev mode.

Change-Id: I81b4d289699e7b0c2758ea1a009cbabaf8a2ce28
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b9b42486f203d332f6068ccd6f4a1a982d327a6b
Original-Change-Id: I5c8fde17d57e953582a1c1dc814be4c08e349847
Original-Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Commit-Id: ce2883b21d3fbfd54eac3a355fb34ec70e9f31ad
Original-Change-Id: Ib4a3c32f1ebf5c6ed71c96a24893dcdee7488b16
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: http://review.coreboot.org/9519
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>

src/mainboard/google/rush_ryu/Kconfig

@@ -26,6 +26,7 @@ config BOARD_SPECIFIC_OPTIONS # dummy
 	select EC_GOOGLE_CHROMEEC_I2C
 	select EC_GOOGLE_CHROMEEC_I2C_PROTO3
 	select EC_SOFTWARE_SYNC
+	select MAINBOARD_DO_NATIVE_VGA_INIT
 	select SPI_FLASH
 	select SOC_NVIDIA_TEGRA132
 	select MAINBOARD_HAS_BOOTBLOCK_INIT

src/soc/nvidia/tegra132/Makefile.inc

@@ -66,12 +66,12 @@ ramstage-y += cbmem.c
 ramstage-y += cpu.c
 ramstage-y += cpu_lib.S
 ramstage-y += clock.c
-ramstage-y += display.c
-ramstage-y += tegra_dsi.c
-ramstage-y += mipi_dsi.c
-ramstage-y += mipi.c
-ramstage-y += mipi-phy.c
-ramstage-y += ./jdi_25x18_display/panel-jdi-lpm102a188a.c
+ramstage-$(CONFIG_MAINBOARD_DO_NATIVE_VGA_INIT) += display.c
+ramstage-$(CONFIG_MAINBOARD_DO_NATIVE_VGA_INIT) += tegra_dsi.c
+ramstage-$(CONFIG_MAINBOARD_DO_NATIVE_VGA_INIT) += mipi_dsi.c
+ramstage-$(CONFIG_MAINBOARD_DO_NATIVE_VGA_INIT) += mipi.c
+ramstage-$(CONFIG_MAINBOARD_DO_NATIVE_VGA_INIT) += mipi-phy.c
+ramstage-$(CONFIG_MAINBOARD_DO_NATIVE_VGA_INIT) += ./jdi_25x18_display/panel-jdi-lpm102a188a.c
 
 ramstage-y += soc.c
 ramstage-y += spi.c

src/soc/nvidia/tegra132/display.c

@@ -29,6 +29,7 @@
 #include <cpu/cpu.h>
 #include <boot/tables.h>
 #include <cbmem.h>
+#include <edid.h>
 #include <soc/clock.h>
 #include <soc/nvidia/tegra/dc.h>
 #include <soc/funitcfg.h>
@@ -289,9 +290,36 @@ void display_startup(device_t dev)
 		return;
 	}
 
-	/* set up window */
+	/* Set up window */
 	update_window(config);
-
 	printk(BIOS_INFO, "%s: display init done.\n", __func__);
+
+	/*
+	 * Pass panel information to cb tables
+	 */
+	struct edid edid;
+	/* Align bytes_per_line to 64 bytes as required by dc */
+	edid.bytes_per_line = ALIGN_UP((config->xres *
+				config->framebuffer_bits_per_pixel / 8), 64);
+	edid.x_resolution = edid.bytes_per_line /
+				(config->framebuffer_bits_per_pixel / 8);
+	edid.y_resolution = config->yres;
+	edid.framebuffer_bits_per_pixel = config->framebuffer_bits_per_pixel;
+
+	printk(BIOS_INFO, "%s: bytes_per_line: %d, bits_per_pixel: %d\n "
+			"               x_res x y_res: %d x %d, size: %d\n",
+			 __func__, edid.bytes_per_line,
+			edid.framebuffer_bits_per_pixel,
+			edid.x_resolution, edid.y_resolution,
+			(edid.bytes_per_line * edid.y_resolution));
+
+	set_vbe_mode_info_valid(&edid, 0);
+
+	/*
+	 * After this point, it is payload's responsibility to allocate
+	 * framebuffer and sets the base address to dc's
+	 * WINBUF_START_ADDR register and enables window by setting dc's
+	 * DISP_DISP_WIN_OPTIONS register.
+	 */
 }
 

src/soc/nvidia/tegra132/soc.c

@@ -86,10 +86,12 @@ static void soc_init(device_t dev)
 	spintable_init((void *)cfg->spintable_addr);
 	arch_initialize_cpus(dev, &cntrl_ops);
 
+#if IS_ENABLED(CONFIG_MAINBOARD_DO_NATIVE_VGA_INIT)
 	if (vboot_skip_display_init())
 		printk(BIOS_INFO, "Skipping display init.\n");
 	else
 		display_startup(dev);
+#endif
 }
 
 static struct device_operations soc_ops = {