diff --git a/src/include/device/mipi_ids.h b/src/include/device/mipi_ids.h new file mode 100644 index 0000000000..2e0254c0b7 --- /dev/null +++ b/src/include/device/mipi_ids.h @@ -0,0 +1,21 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* This file is part of the coreboot project. */ + +/* + * MIPI Alliance Manufacturer IDs from https://mid.mipi.org + */ + +#ifndef __DEVICE_MIPI_IDS_H__ +#define __DEVICE_MIPI_IDS_H__ + +/* Board Members */ +#define MIPI_MFG_ID_INTEL 0x0105 +#define MIPI_MFG_ID_QUALCOMM 0x0217 +#define MIPI_MFG_ID_BOSCH 0x03b8 +#define MIPI_MFG_ID_SAMSUNG 0x010b +#define MIPI_MFG_ID_ST_MICRO 0x0104 +#define MIPI_MFG_ID_SYNOPSYS 0x0148 +#define MIPI_MFG_ID_TI 0x0102 +#define MIPI_MFG_ID_TOSHIBA 0x0126 + +#endif /* __DEVICE_MIPI_IDS_H__ */ diff --git a/src/include/device/soundwire.h b/src/include/device/soundwire.h new file mode 100644 index 0000000000..85e3186219 --- /dev/null +++ b/src/include/device/soundwire.h @@ -0,0 +1,429 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +/* + * This header implements structures to describe the properties defined in the + * SoundWire Discovery and Configuration (DisCo) Specification Version 1.0. + * + * This is available for non-members after providing a name and email address at + * https://resources.mipi.org/disco_soundwire + * + * The structure members mirror the property names defined in the specification, + * with the exception that '-' is transformed into '_' for compatible naming. + * + * See Documentation/drivers/soundwire.md for more information. + */ + +#ifndef __DEVICE_SOUNDWIRE_H__ +#define __DEVICE_SOUNDWIRE_H__ + +#include +#include + +/** + * enum soundwire_limits - Limits on number of SoundWire devices in topology. + * @SOUNDWIRE_MAX: Maximum value for lists of configuration values in SoundWire devices. + * @SOUNDWIRE_MIN_DPN: Data Port minimum value. DPn range is 1-14. + * @SOUNDWIRE_MAX_DPN: Data Port maximum value. DPn range is 1-14. + * @SOUNDWIRE_MAX_SLAVE: Maximum number of slave devices that can be attached to one master. + * @SOUNDWIRE_MAX_LINK: Maximum number of master link devices that can be on one controller. + * @SOUNDWIRE_MAX_LANE: Maximum number of lanes in a multi-lane slave device. + * @SOUNDWIRE_MAX_MODE: Maximum number of Audio or Bulk Register Access modes. + */ +enum soundwire_limits { + SOUNDWIRE_MAX = 32, + SOUNDWIRE_MIN_DPN = 1, + SOUNDWIRE_MAX_DPN = 14, + SOUNDWIRE_MAX_SLAVE = 11, + SOUNDWIRE_MAX_LINK = 8, + SOUNDWIRE_MAX_LANE = 8, + SOUNDWIRE_MAX_MODE = 4 +}; + +/** + * enum soundwire_sw_version - Versions of SoundWire Discovery and Configuration Specification. + * @SOUNDWIRE_SW_VERSION_1_0: DisCo Specification Version 1.0 released November 2016. + */ +enum soundwire_sw_version { + SOUNDWIRE_SW_VERSION_1_0 = 0x00010000 +}; + +/** + * enum soundwire_version - Versions of SoundWire Specification supported by a device. + * @SOUNDWIRE_VERSION_1_0: SoundWire Specification Version 1.0 released January 2015. + * @SOUNDWIRE_VERSION_1_1: SoundWire Specification Version 1.1 released June 2016. + * @SOUNDWIRE_VERSION_1_2: SoundWire Specification Version 1.2 released April 2019. + */ +enum soundwire_version { + SOUNDWIRE_VERSION_1_0 = 1, + SOUNDWIRE_VERSION_1_1, + SOUNDWIRE_VERSION_1_2 +}; + +/** + * enum mipi_class - MIPI class encoding. + * @MIPI_CLASS_NONE: No further class decoding. + * @MIPI_CLASS_SDCA: Device implements SoundWire Device Class for Audio (SDCA). + * + * 0x02-0x7F: Reserved + * 0x80-0xFF: MIPI Alliance extended device class + */ +enum mipi_class { + MIPI_CLASS_NONE, + MIPI_CLASS_SDCA +}; + +/** + * struct soundwire_address - SoundWire Device Address Encoding. + * @version: SoundWire specification version from &enum soundwire_version. + * @link_id: Zero-based SoundWire master link id. + * @unique_id: Unique ID for multiple slave devices on the same bus. + * @manufacturer_id: Manufacturer ID from include/device/mipi_ids.h. + * @part_id: Vendor defined part ID. + * @class: MIPI class encoding in &enum mipi_class. + */ +struct soundwire_address { + enum soundwire_version version; + uint8_t link_id; + uint8_t unique_id; + uint16_t manufacturer_id; + uint16_t part_id; + enum mipi_class class; +}; + +/** + * struct soundwire_link - SoundWire master device properties. + * @clock_stop_mode0_supported: %true if clock stop mode0 is supported by this device. + * @clock_stop_mode1_supported: %true if clock stop mode1 is supported by this device. + * @max_clock_frequency: Maximum bus clock for this device in Hz. + * @supported_clock_gears_count: Number of entries in supported_clock_gears. + * @supported_clock_gears: One entry for each supported clock gear. + * @clock_frequencies_supported_count: Number of entries in clock_frequencies_supported. + * @clock_frequencies_supported: One entry for each clock frequency supported in Hz. + * @default_frame_rate: Controller default frame rate in Hz. + * @default_frame_row_size: Number of rows between 48-256. + * @default_frame_col_size: Number of columns: 2, 4, 8, 16. + * @dynamic_frame_shape: %true if bus driver may change frame shape dynamically. + * @command_error_threshold: Number of times that software may retry sending a command. + */ +struct soundwire_link { + bool clock_stop_mode0_supported; + bool clock_stop_mode1_supported; + unsigned int max_clock_frequency; + size_t supported_clock_gears_count; + unsigned int supported_clock_gears[SOUNDWIRE_MAX]; + size_t clock_frequencies_supported_count; + uint64_t clock_frequencies_supported[SOUNDWIRE_MAX]; + unsigned int default_frame_rate; + unsigned int default_frame_row_size; + unsigned int default_frame_col_size; + bool dynamic_frame_shape; + unsigned int command_error_threshold; +}; + +/** + * struct soundwire_controller - SoundWire controller properties. + * @master_count: Number of masters present on this device. + * @master_list: One entry for each master device. + */ +struct soundwire_controller { + unsigned int master_list_count; + struct soundwire_link master_list[SOUNDWIRE_MAX_LINK]; +}; + +/* SoundWire port bitmask, used for slave source/sink port list property. */ +#define SOUNDWIRE_PORT(port) BIT(port) + +/** + * struct soundwire_slave - SoundWire slave device properties. + * @wake_up_unavailable: Wake from this device is not supported or allowed. + * @test_mode_supported: %true if test mode is supported by this device. + * @clock_stop_mode1_supported: %true if clock stop mode1 is supported by this device. + * @simplified_clockstopprepare_sm_supported: %true if slave only supports the simplified + * clock stop prepare state machine and will + * always be ready for a stop clock transition. + * @clockstopprepare_timeout: Slave-specific timeout in milliseconds. + * @clockstopprepare_hard_reset_behavior: %true when slave keeps the status of the + * StopClockPrepare state machine after exit from + * mode1 and must be de-prepared by software. + * @slave_channelprepare_timeout: Slave-specific timeout in milliseconds. + * @highPHY_capable: %true if device is HighPHY capable. + * @paging_supported: %true if device implements paging registers. + * @bank_delay_supported: %true if device implements bank delay/bridge registers. + * @port15_read_behavior: %true if device supports read to Port15 alias. + * @master_count: Number of master links present on this slave. + * @source_port_list: Bitmap identifying supported source ports, starting at bit 1. + * @sink_port_list: Bitmap identifying supported sink ports, starting at bit 1. + */ +struct soundwire_slave { + bool wake_up_unavailable; + bool test_mode_supported; + bool clock_stop_mode1_supported; + bool simplified_clockstopprepare_sm_supported; + unsigned int clockstopprepare_timeout; + bool clockstopprepare_hard_reset_behavior; + unsigned int slave_channelprepare_timeout; + bool highPHY_capable; + bool paging_supported; + bool bank_delay_supported; + bool port15_read_behavior; + size_t master_count; + uint32_t source_port_list; + uint32_t sink_port_list; +}; + +/** + * enum soundwire_multilane_dir - Direction of lane in slave multilane device. + * @MASTER_LANE: Lane is connected to a master device. + * @SLAVE_LINK: Lane is connected to a slave device. + */ +enum soundwire_multilane_dir { + MASTER_LANE, + SLAVE_LINK, +}; + +/** + * struct soundwire_multilane_map - Pair a soundwire lane with direction. + * @lane: Slave device lane number. + * @direction: Direction of the slave lane. + * @connection: The connection that this lane makes. + */ +struct soundwire_multilane_map { + unsigned int lane; + enum soundwire_multilane_dir direction; + union lane_type { + unsigned int master_lane; + unsigned int slave_link; + } connection; +}; + +/** + * struct soundwire_multilane - Multi-Lane SoundWire slave device. + * @lane_mapping_count: Number of entries in lane_mapping. + * @lane_mapping: One entry for each lane that is connected to lanes on a master device or + * slave devices via a slave link. Lane 0 is always connected to the master + * and entry 0 in this array is ignored. + * @lane_bus_holder_count: Number of entries in lane_bus_holder. + * @lane_bus_holder: One entry for each lane, %true if the device behaves as a bus holder. + */ +struct soundwire_multilane { + size_t lane_mapping_count; + struct soundwire_multilane_map lane_mapping[SOUNDWIRE_MAX_LANE]; + size_t lane_bus_holder_count; + bool lane_bus_holder[SOUNDWIRE_MAX_LANE]; +}; + +/** + * enum soundwire_prepare_channel_behavior - Specifies the dependencies between the + * Channel Prepare sequence and bus clock config. + * @CHANNEL_PREPARE_ANY_FREQUENCY: Channel Prepare can happen at any bus clock rate. + * @CHANNEL_PREPARE_SUPPORTED_FREQUENCY: Channel Prepare sequence shall happen only after + * the bus clock is changed to a supported frequency. + */ +enum soundwire_prepare_channel_behavior { + CHANNEL_PREPARE_ANY_FREQUENCY, + CHANNEL_PREPARE_SUPPORTED_FREQUENCY +}; + +/** + * struct soundwire_audio_mode - Properties for each supported Audio Mode. + * @sdw_name: SoundWire device name for this audio mode device instance. + * @max_bus_frequency: Maximum bus frequency of this mode in Hz. + * @min_bus_frequency: Minimum bus frequency of this mode in Hz. + * @bus_frequency_configs_count: Number of entries in bus_frequency_configs. + * @bus_frequency_configs: One entry for each supported bus frequency, + * if not all values in min to max range are valid. + * @max_sampling_frequency: Maximum sampling frequency of this mode in Hz. + * @min_sampling_frequency: Minimum sampling frequency of this mode in Hz. + * @sampling_frequency_configs_count: Number of entries in sampling_frequency_configs. + * @sampling_frequency_configs: One entry for each supported sampling frequency, + * if not all values in min to max range are valid. + * @prepare_channel_behavior: Dependencies between Channel Prepare and bus clock. + * @glitchless_transitions: Bitmap describing possible glitchless transitions from this audio + * mode to another audio mode. Not used for only one mode. + */ +struct soundwire_audio_mode { + unsigned int max_bus_frequency; + unsigned int min_bus_frequency; + size_t bus_frequency_configs_count; + uint64_t bus_frequency_configs[SOUNDWIRE_MAX]; + unsigned int max_sampling_frequency; + unsigned int min_sampling_frequency; + size_t sampling_frequency_configs_count; + uint64_t sampling_frequency_configs[SOUNDWIRE_MAX]; + enum soundwire_prepare_channel_behavior prepare_channel_behavior; + uint32_t glitchless_transitions; +}; + +/* Type of SoundWire Data Port supported for this device. */ +enum soundwire_data_port_type { + FULL_DATA_PORT, + SIMPLIFIED_DATA_PORT, + REDUCED_DATA_PORT +}; + +/* Number of samples that can be grouped together (0-based count). */ +enum soundwire_block_group_count { + BLOCK_GROUP_COUNT_1, + BLOCK_GROUP_COUNT_2, + BLOCK_GROUP_COUNT_3, + BLOCK_GROUP_COUNT_4 +}; + +/* Bitmap identifying the types of modes supported. */ +enum soundwire_mode_bitmap { + MODE_ISOCHRONOUS = BIT(0), + MODE_TX_CONTROLLED = BIT(1), + MODE_RX_CONTROLLED = BIT(2), + MODE_FULL_ASYNCHRONOUS = BIT(3) +}; + +/* Bitmap identifying the encoding schemes supported. */ +enum soundwire_port_encoding_bitmap { + ENCODE_TWOS_COMPLEMENT = BIT(0), + ENCODE_SIGN_MAGNITUDE = BIT(1), + ENCODE_IEEE_32BIT_FP = BIT(2) +}; + +/** + * struct soundwire_dpn - Configuration properties for SoundWire DPn Data Ports. + * @port_max_wordlength: Maximum number of bits in a Payload Channel Sample. (1-64) + * @port_min_wordlength: Minimum number of bits in a Payload Channel Sample. (1-64) + * @port_wordlength_configs_count: Number of entries in port_wordlength_configs. + * @port_wordlength_configs: One entry for each supported wordlength. + * Used if only specific wordlength values are allowed. + * @data_port_type: Type of data port from &enum soundwire_data_port_type. + * @max_grouping_supported: 0-based maximum number of samples that can be grouped for + * %FULL_DATA_PORT. The %SIMPLIFIED_DATA_PORT and %REDUCED_DATA_PORT + * require 4 samples in a group. + * @simplified_channelprepare_sm: %true if the channel prepare sequence is not required, + * and the Port Ready interrupt is not supported. + * @port_channelprepare_timeout: Port-specific timeout value in milliseconds. + * @imp_def_dpn_interrupts_supported: Bitmap for support of implementation-defined interrupts. + * @min_channel_number: Minimum channel number supported. + * @max_channel_number: Maximum channel number supported. + * @channel_number_list_count: Number of entries in channel_number_list. + * @channel_number_list: One entry for each available channel number. + * Used if only specific channels are available. + * @channel_combination_list_count: Number of entries in channel_combination_list. + * @channel_combination_list: One bitmap entry for each valid channel combination. + * @modes_supported: Bitmap identifying the types of modes supported by the device. + * @max_async_buffer: Number of samples that this port can buffer in asynchronous modes. + * Only required if the slave implements buffer larger than required. + * @block_packing_mode: %true if BlockPackingMode may be configured as BlockPerPort or + * BlocKPerChannel. %false if BlockPackingMode must be BlockPerPort. + * @port_encoding_type: Bitmap describing the types of Payload Channel Sample encoding + * schemes implemented by this port. + * @port_audio_mode_count: Number of entries in audio_mode_list. + * @port_audio_mode_list: One entry for each supported audio mode id. + */ +struct soundwire_dpn { + unsigned int port_max_wordlength; + unsigned int port_min_wordlength; + size_t port_wordlength_configs_count; + uint64_t port_wordlength_configs[SOUNDWIRE_MAX]; + enum soundwire_data_port_type data_port_type; + enum soundwire_block_group_count max_grouping_supported; + bool simplified_channelprepare_sm; + unsigned int port_channelprepare_timeout; + uint32_t imp_def_dpn_interrupts_supported; + unsigned int min_channel_number; + unsigned int max_channel_number; + size_t channel_number_list_count; + uint64_t channel_number_list[SOUNDWIRE_MAX]; + size_t channel_combination_list_count; + uint64_t channel_combination_list[SOUNDWIRE_MAX]; + enum soundwire_mode_bitmap modes_supported; + unsigned int max_async_buffer; + bool block_packing_mode; + uint32_t port_encoding_type; + size_t port_audio_mode_count; + unsigned int port_audio_mode_list[SOUNDWIRE_MAX_MODE]; +}; + +/** + * struct soundwire_bra_mode - Bulk Register Access mode properties. + * @max_bus_frequency: Maximum bus frequency of this mode in Hz. + * @min_bus_frequency: Minimum bus frequency of this mode in Hz. + * @bus_frequency_configs_count: Number of entries in bus_frequency_configs. + * @bus_frequency_configs: One entry for each supported bus frequency, + * Used if not all values in min to max range are valid. + * @max_data_per_frame: Maximum data bytes per frame, excluding header, CRC, and footer. + * @min_us_between_transactions: Amount of delay in uS required between transactions. + * @max_bandwidth: Maximum bandwidth in bytes per second that can be written/read. + * @block_alignment: Size of basic block in bytes. + */ +struct soundwire_bra_mode { + unsigned int max_bus_frequency; + unsigned int min_bus_frequency; + size_t bus_frequency_configs_count; + uint64_t bus_frequency_configs[SOUNDWIRE_MAX]; + unsigned int max_data_per_frame; + unsigned int min_us_between_transactions; + unsigned int max_bandwidth; + unsigned int block_alignment; +}; + +/** + * struct soundwire_dp0 - Configuration properties for SoundWire DP0 Data Port. + * @port_max_wordlength: Maximum number of bits in a Payload Channel Sample. (1-64) + * @port_min_wordlength: Minimum number of bits in a Payload Channel Sample. (1-64) + * @port_wordlength_configs_count: Number of entries in port_wordlength_configs. + * @port_wordlength_configs: One entry for each supported wordlength. + * Used if only specific wordlength values are allowed. + * @bra_flow_controlled: Used if the slave can result in an OK_NotReady response. + * @bra_imp_def_response_supported: %true if implementation defined response is supported. + * @bra_role_supported: %true if the slave supports initiating BRA transactions. + * @simplified_channel_prepare_sm: %true if the channel prepare sequence is not required, + * and the Port Ready interrupt is not supported. + * @imp_def_dp0_interrupts_supported: If set, each bit corresponds to support for + * implementation-defined interrupts ImpDef. + * @imp_def_bpt_supported: %true if implementation defined Payload Type is supported. + * @bra_mode_count: Number of entries in bra_mode_list. + * @bra_mode_list: One entry for each supported Bulk Register Access mode id. + */ +struct soundwire_dp0 { + unsigned int port_max_wordlength; + unsigned int port_min_wordlength; + size_t port_wordlength_configs_count; + uint64_t port_wordlength_configs[SOUNDWIRE_MAX]; + bool bra_flow_controlled; + bool bra_imp_def_response_supported; + bool bra_role_supported; + bool simplified_channel_prepare_sm; + unsigned int imp_def_dp0_interrupts_supported; + bool imp_def_bpt_supported; + size_t bra_mode_count; + unsigned int bra_mode_list[SOUNDWIRE_MAX_MODE]; +}; + +/** + * struct soundwire_dpn_entry - Full duplex data port properties for DPn 1-14. + * @port: DPn data port number, starting at 1. + * @source: Source data port properties. (optional) + * @sink: Sink data port properties. (optional) + */ +struct soundwire_dpn_entry { + size_t port; + struct soundwire_dpn *source; + struct soundwire_dpn *sink; +}; + +/** + * struct soundwire_codec - Contains all configuration for a SoundWire codec slave device. + * @slave: Properties for slave device. + * @audio_mode: Properties for audio modes used by DPn data ports 1-14. + * @dpn: Properties for DPn data ports 1-14. + * @dp0_bra_mode: Properties for Bulk Register Access mode for data port 0. (optional) + * @dp0: Properties for data port 0. (optional) + * @multilane: Properties for slave multilane device. (optional) + */ +struct soundwire_codec { + struct soundwire_slave *slave; + struct soundwire_audio_mode *audio_mode[SOUNDWIRE_MAX_MODE]; + struct soundwire_dpn_entry dpn[SOUNDWIRE_MAX_DPN - SOUNDWIRE_MIN_DPN]; + struct soundwire_bra_mode *dp0_bra_mode[SOUNDWIRE_MAX_MODE]; + struct soundwire_dp0 *dp0; + struct soundwire_multilane *multilane; +}; + +#endif /* __DEVICE_SOUNDWIRE_H__ */