From 463af337b0b4c4fd79c4f3b28fac976448e49ec9 Mon Sep 17 00:00:00 2001 From: Aaron Durbin Date: Tue, 3 May 2016 17:26:35 -0500 Subject: [PATCH] cpu/intel/haswell: convert to using common MP and SMM init In order to reduce duplication of code use the common MP and SMM initialization flow. Change-Id: I80b5b94b62bdd001581eb56513a0d532fffb64e8 Signed-off-by: Aaron Durbin Reviewed-on: https://review.coreboot.org/14596 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie --- src/cpu/intel/haswell/haswell.h | 8 +- src/cpu/intel/haswell/haswell_init.c | 128 +++++++++++----------- src/cpu/intel/haswell/smmrelocate.c | 153 +++++---------------------- 3 files changed, 90 insertions(+), 199 deletions(-) diff --git a/src/cpu/intel/haswell/haswell.h b/src/cpu/intel/haswell/haswell.h index 9236b77485..8298fb1699 100644 --- a/src/cpu/intel/haswell/haswell.h +++ b/src/cpu/intel/haswell/haswell.h @@ -193,14 +193,16 @@ void intel_cpu_haswell_finalize_smm(void); /* Configure power limits for turbo mode */ void set_power_limits(u8 power_limit_1_time); int cpu_config_tdp_levels(void); -/* Returns 0 on success, < 0 on failure. */ -int smm_initialize(void); +void smm_relocation_handler(int cpu, uintptr_t curr_smbase, + uintptr_t staggered_smbase); +void smm_info(uintptr_t *perm_smbase, size_t *perm_smsize, + size_t *smm_save_state_size); +void smm_initialize(void); void smm_relocate(void); struct bus; void bsp_init_and_start_aps(struct bus *cpu_bus); /* Determine if HyperThreading is disabled. The variable is not valid until * setup_ap_init() has been called. */ -extern int ht_disabled; #endif /* CPU identification */ diff --git a/src/cpu/intel/haswell/haswell_init.c b/src/cpu/intel/haswell/haswell_init.c index f488ef61a8..74147ab6dd 100644 --- a/src/cpu/intel/haswell/haswell_init.c +++ b/src/cpu/intel/haswell/haswell_init.c @@ -714,20 +714,6 @@ static void configure_mca(void) wrmsr(IA32_MC0_STATUS + (i * 4), msr); } -static void bsp_init_before_ap_bringup(struct bus *cpu_bus) -{ - /* Setup MTRRs based on physical address size. */ - x86_setup_mtrrs_with_detect(); - x86_mtrr_check(); - - initialize_vr_config(); - - if (haswell_is_ult()) { - calibrate_24mhz_bclk(); - configure_pch_power_sharing(); - } -} - /* All CPUs including BSP will run the following function. */ static void haswell_init(struct device *cpu) { @@ -765,47 +751,27 @@ static void haswell_init(struct device *cpu) /* MP initialization support. */ static const void *microcode_patch; -int ht_disabled; +static int ht_disabled; -static int adjust_apic_id_ht_disabled(int index, int apic_id) +static void pre_mp_init(void) { - return 2 * index; + /* Setup MTRRs based on physical address size. */ + x86_setup_mtrrs_with_detect(); + x86_mtrr_check(); + + initialize_vr_config(); + + if (haswell_is_ult()) { + calibrate_24mhz_bclk(); + configure_pch_power_sharing(); + } } -static void relocate_and_load_microcode(void) +static int get_cpu_count(void) { - /* Relocate the SMM handler. */ - smm_relocate(); - - /* After SMM relocation a 2nd microcode load is required. */ - intel_microcode_load_unlocked(microcode_patch); -} - -static void enable_smis(void) -{ - /* Now that all APs have been relocated as well as the BSP let SMIs - * start flowing. */ - southbridge_smm_enable_smi(); - - /* Lock down the SMRAM space. */ - smm_lock(); -} - -static struct mp_flight_record mp_steps[] = { - MP_FR_NOBLOCK_APS(relocate_and_load_microcode, - relocate_and_load_microcode), - MP_FR_BLOCK_APS(mp_initialize_cpu, mp_initialize_cpu), - /* Wait for APs to finish initialization before proceeding. */ - MP_FR_BLOCK_APS(NULL, enable_smis), -}; - -void bsp_init_and_start_aps(struct bus *cpu_bus) -{ - void *smm_save_area; + msr_t msr; int num_threads; int num_cores; - msr_t msr; - struct mp_params mp_params; msr = rdmsr(CORE_THREAD_COUNT_MSR); num_threads = (msr.lo >> 0) & 0xffff; @@ -815,36 +781,60 @@ void bsp_init_and_start_aps(struct bus *cpu_bus) ht_disabled = num_threads == num_cores; - /* Perform any necessary BSP initialization before APs are brought up. - * This call also allows the BSP to prepare for any secondary effects - * from calling cpu_initialize() such as smm_init(). */ - bsp_init_before_ap_bringup(cpu_bus); + return num_threads; +} +static void get_microcode_info(const void **microcode, int *parallel) +{ microcode_patch = intel_microcode_find(); + *microcode = microcode_patch; + *parallel = 1; +} - /* Save default SMM area before relocation occurs. */ - smm_save_area = backup_default_smm_area(); - - mp_params.num_cpus = num_threads; - mp_params.parallel_microcode_load = 1; +static int adjust_apic_id(int index, int apic_id) +{ if (ht_disabled) - mp_params.adjust_apic_id = adjust_apic_id_ht_disabled; + return 2 * index; else - mp_params.adjust_apic_id = NULL; - mp_params.flight_plan = &mp_steps[0]; - mp_params.num_records = ARRAY_SIZE(mp_steps); - mp_params.microcode_pointer = microcode_patch; + return index; +} - /* Load relocation and permeanent handlers. Then initiate relocation. */ - if (smm_initialize()) - printk(BIOS_CRIT, "SMM Initialiazation failed...\n"); +static void per_cpu_smm_trigger(void) +{ + /* Relocate the SMM handler. */ + smm_relocate(); - if (mp_init(cpu_bus, &mp_params)) { + /* After SMM relocation a 2nd microcode load is required. */ + intel_microcode_load_unlocked(microcode_patch); +} + +static void post_mp_init(void) +{ + /* Now that all APs have been relocated as well as the BSP let SMIs + * start flowing. */ + southbridge_smm_enable_smi(); + + /* Lock down the SMRAM space. */ + smm_lock(); +} + +static const struct mp_ops mp_ops = { + .pre_mp_init = pre_mp_init, + .get_cpu_count = get_cpu_count, + .get_smm_info = smm_info, + .get_microcode_info = get_microcode_info, + .adjust_cpu_apic_entry = adjust_apic_id, + .pre_mp_smm_init = smm_initialize, + .per_cpu_smm_trigger = per_cpu_smm_trigger, + .relocation_handler = smm_relocation_handler, + .post_mp_init = post_mp_init, +}; + +void bsp_init_and_start_aps(struct bus *cpu_bus) +{ + if (mp_init_with_smm(cpu_bus, &mp_ops)) { printk(BIOS_ERR, "MP initialization failure.\n"); } - - /* Restore the default SMM region. */ - restore_default_smm_area(smm_save_area); } static struct device_operations cpu_dev_ops = { diff --git a/src/cpu/intel/haswell/smmrelocate.c b/src/cpu/intel/haswell/smmrelocate.c index 99a972e409..5c50ad1c93 100644 --- a/src/cpu/intel/haswell/smmrelocate.c +++ b/src/cpu/intel/haswell/smmrelocate.c @@ -91,9 +91,9 @@ static inline void write_uncore_emrr(struct smm_relocation_params *relo_params) wrmsr(UNCORE_EMRRphysMask_MSR, relo_params->uncore_emrr_mask); } -static void update_save_state(int cpu, - struct smm_relocation_params *relo_params, - const struct smm_runtime *runtime) +static void update_save_state(int cpu, uintptr_t curr_smbase, + uintptr_t staggered_smbase, + struct smm_relocation_params *relo_params) { u32 smbase; u32 iedbase; @@ -101,7 +101,7 @@ static void update_save_state(int cpu, /* The relocated handler runs with all CPUs concurrently. Therefore * stagger the entry points adjusting SMBASE downwards by save state * size * CPU num. */ - smbase = relo_params->smram_base - cpu * runtime->save_state_size; + smbase = staggered_smbase; iedbase = relo_params->ied_base; printk(BIOS_DEBUG, "New SMBASE=0x%08x IEDBASE=0x%08x\n", @@ -132,8 +132,8 @@ static void update_save_state(int cpu, } else { em64t101_smm_state_save_area_t *save_state; - save_state = (void *)(runtime->smbase + SMM_DEFAULT_SIZE - - runtime->save_state_size); + save_state = (void *)(curr_smbase + SMM_DEFAULT_SIZE - + sizeof(*save_state)); save_state->smbase = smbase; save_state->iedbase = iedbase; @@ -161,24 +161,11 @@ static int bsp_setup_msr_save_state(struct smm_relocation_params *relo_params) /* The relocation work is actually performed in SMM context, but the code * resides in the ramstage module. This occurs by trampolining from the default * SMRAM entry point to here. */ -static void asmlinkage cpu_smm_do_relocation(void *arg) +void smm_relocation_handler(int cpu, uintptr_t curr_smbase, + uintptr_t staggered_smbase) { msr_t mtrr_cap; - struct smm_relocation_params *relo_params; - const struct smm_module_params *p; - const struct smm_runtime *runtime; - int cpu; - - p = arg; - runtime = p->runtime; - relo_params = p->arg; - cpu = p->cpu; - - if (cpu >= CONFIG_MAX_CPUS) { - printk(BIOS_CRIT, - "Invalid CPU number assigned in SMM stub: %d\n", cpu); - return; - } + struct smm_relocation_params *relo_params = &smm_reloc_params; printk(BIOS_DEBUG, "In relocation handler: cpu %d\n", cpu); @@ -207,7 +194,7 @@ static void asmlinkage cpu_smm_do_relocation(void *arg) } /* Make appropriate changes to the save state map. */ - update_save_state(cpu, relo_params, runtime); + update_save_state(cpu, curr_smbase, staggered_smbase, relo_params); /* Write EMRR and SMRR MSRs based on indicated support. */ mtrr_cap = rdmsr(MTRR_CAP_MSR); @@ -290,49 +277,6 @@ static void fill_in_relocation_params(struct device *dev, params->uncore_emrr_mask.hi = (1 << (39 - 32)) - 1; } -static void adjust_apic_id_map(struct smm_loader_params *smm_params) -{ - struct smm_runtime *runtime; - int i; - - /* Adjust the APIC id map if HT is disabled. */ - if (!ht_disabled) - return; - - runtime = smm_params->runtime; - - /* The APIC ids increment by 2 when HT is disabled. */ - for (i = 0; i < CONFIG_MAX_CPUS; i++) - runtime->apic_id_to_cpu[i] = runtime->apic_id_to_cpu[i] * 2; -} - -static int install_relocation_handler(int num_cpus, - struct smm_relocation_params *relo_params) -{ - /* The default SMM entry can happen in parallel or serially. If the - * default SMM entry is done in parallel the BSP has already setup - * the saving state to each CPU's MSRs. At least one save state size - * is required for the initial SMM entry for the BSP to determine if - * parallel SMM relocation is even feasible. Set the stack size to - * the save state size, and call into the do_relocation handler. */ - int save_state_size = sizeof(em64t101_smm_state_save_area_t); - struct smm_loader_params smm_params = { - .per_cpu_stack_size = save_state_size, - .num_concurrent_stacks = num_cpus, - .per_cpu_save_state_size = save_state_size, - .num_concurrent_save_states = 1, - .handler = (smm_handler_t)&cpu_smm_do_relocation, - .handler_arg = (void *)relo_params, - }; - - if (smm_setup_relocation_handler(&smm_params)) - return -1; - - adjust_apic_id_map(&smm_params); - - return 0; -} - static void setup_ied_area(struct smm_relocation_params *params) { char *ied_base; @@ -357,88 +301,43 @@ static void setup_ied_area(struct smm_relocation_params *params) //memset(ied_base + (2 << 20), 0, (2 << 20)); } -static int install_permanent_handler(int num_cpus, - struct smm_relocation_params *relo_params) +void smm_info(uintptr_t *perm_smbase, size_t *perm_smsize, + size_t *smm_save_state_size) { - /* There are num_cpus concurrent stacks and num_cpus concurrent save - * state areas. Lastly, set the stack size to the save state size. */ - int save_state_size = sizeof(em64t101_smm_state_save_area_t); - struct smm_loader_params smm_params = { - .per_cpu_stack_size = save_state_size, - .num_concurrent_stacks = num_cpus, - .per_cpu_save_state_size = save_state_size, - .num_concurrent_save_states = num_cpus, - }; - - printk(BIOS_DEBUG, "Installing SMM handler to 0x%08x\n", - relo_params->smram_base); - if (smm_load_module((void *)relo_params->smram_base, - relo_params->smram_size, &smm_params)) - return -1; - - adjust_apic_id_map(&smm_params); - - return 0; -} - -static int cpu_smm_setup(void) -{ - struct device *dev; - int num_cpus; - msr_t msr; + device_t dev = dev_find_slot(0, PCI_DEVFN(0, 0)); printk(BIOS_DEBUG, "Setting up SMI for CPU\n"); - dev = dev_find_slot(0, PCI_DEVFN(0, 0)); - fill_in_relocation_params(dev, &smm_reloc_params); setup_ied_area(&smm_reloc_params); - msr = rdmsr(CORE_THREAD_COUNT_MSR); - num_cpus = msr.lo & 0xffff; - if (num_cpus > CONFIG_MAX_CPUS) { - printk(BIOS_CRIT, - "Error: Hardware CPUs (%d) > MAX_CPUS (%d)\n", - num_cpus, CONFIG_MAX_CPUS); - } - - if (install_relocation_handler(num_cpus, &smm_reloc_params)) { - printk(BIOS_CRIT, "SMM Relocation handler install failed.\n"); - return -1; - } - - if (install_permanent_handler(num_cpus, &smm_reloc_params)) { - printk(BIOS_CRIT, "SMM Permanent handler install failed.\n"); - return -1; - } - - /* Ensure the SMM handlers hit DRAM before performing first SMI. */ - /* TODO(adurbin): Is this really needed? */ - wbinvd(); - - return 0; + *perm_smbase = smm_reloc_params.smram_base; + *perm_smsize = smm_reloc_params.smram_size; + *smm_save_state_size = sizeof(em64t101_smm_state_save_area_t); } -int smm_initialize(void) +void smm_initialize(void) { - /* Return early if CPU SMM setup failed. */ - if (cpu_smm_setup()) - return -1; - /* Clear the SMM state in the southbridge. */ southbridge_smm_clear_state(); - /* Run the relocation handler. */ + /* + * Run the relocation handler for on the BSP to check and set up + * parallel SMM relocation. + */ smm_initiate_relocation(); if (smm_reloc_params.smm_save_state_in_msrs) { printk(BIOS_DEBUG, "Doing parallel SMM relocation.\n"); } - - return 0; } +/* The default SMM entry can happen in parallel or serially. If the + * default SMM entry is done in parallel the BSP has already setup + * the saving state to each CPU's MSRs. At least one save state size + * is required for the initial SMM entry for the BSP to determine if + * parallel SMM relocation is even feasible. */ void smm_relocate(void) { /*