mb/google/dedede/var/taranza: Copy devicetree and GPIO from var/dibbi
copy from dibbi since taranza base on dibbi,this is only for first initial configuration, will update the more setting afterward. BUG=b:277664211 BRANCH=dedede TEST=build Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com> Change-Id: Ia319f65897c0fea2f0558c20a5bc36bb6fbaea96 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74934 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
This commit is contained in:
Sheng-Liang Pan
Eric Lai
parent
cbbdaf4524
commit
465fbbe93e
|
|
@ -205,6 +205,9 @@ config BOARD_GOOGLE_SHOTZO
|
|||
config BOARD_GOOGLE_TARANZA
|
||||
bool "-> Taranza"
|
||||
select BOARD_GOOGLE_BASEBOARD_DEDEDE_CR50
|
||||
select RT8168_GEN_ACPI_POWER_RESOURCE
|
||||
select RT8168_GET_MAC_FROM_VPD
|
||||
select RT8168_SET_LED_MODE
|
||||
|
||||
config BOARD_GOOGLE_BOXY
|
||||
bool "-> Boxy"
|
||||
|
|
|
|||
|
|
@ -0,0 +1,3 @@
|
|||
## SPDX-License-Identifier: GPL-2.0-or-later
|
||||
|
||||
ramstage-y += gpio.c
|
||||
|
|
@ -0,0 +1,93 @@
|
|||
/* SPDX-License-Identifier: GPL-2.0-or-later */
|
||||
|
||||
#include <baseboard/gpio.h>
|
||||
#include <baseboard/variants.h>
|
||||
|
||||
/* Pad configuration in ramstage */
|
||||
static const struct pad_config gpio_table[] = {
|
||||
/* A11 : TOUCH_RPT_EN */
|
||||
PAD_NC(GPP_A11, NONE),
|
||||
/* A12 : USB_OC1_N */
|
||||
PAD_CFG_NF(GPP_A12, NONE, DEEP, NF1),
|
||||
/* A13 : USB_OC2_N */
|
||||
PAD_CFG_NF(GPP_A13, NONE, DEEP, NF1),
|
||||
/* A14 : USB_OC3_N */
|
||||
PAD_CFG_NF(GPP_A14, NONE, DEEP, NF1),
|
||||
/* A18 : USB_OC0_N */
|
||||
PAD_CFG_NF(GPP_A18, NONE, DEEP, NF1),
|
||||
|
||||
/* B9 : LAN_CLKREQ_ODL */
|
||||
PAD_CFG_NF(GPP_B9, NONE, DEEP, NF1),
|
||||
|
||||
/* D2 : PWM_PP3300_BUZZER */
|
||||
PAD_CFG_GPO(GPP_D2, 1, DEEP),
|
||||
/* D4 : LAN_PE_ISOLATE_ODL_R */
|
||||
PAD_CFG_GPO(GPP_D4, 1, DEEP),
|
||||
/* D5 : TOUCH_RESET_L */
|
||||
PAD_NC(GPP_D5, NONE),
|
||||
/* D6 : EN_PP3300_TOUCH_S0 */
|
||||
PAD_NC(GPP_D6, NONE),
|
||||
/* D17 : LAN_PERST_L */
|
||||
PAD_CFG_GPO(GPP_D17, 1, PLTRST),
|
||||
/* D19 : WWAN_WLAN_COEX1 */
|
||||
PAD_NC(GPP_D19, NONE),
|
||||
/* D20 : WWAN_WLAN_COEX2 */
|
||||
PAD_NC(GPP_D20, NONE),
|
||||
|
||||
/* E13 : GPP_E13/DDI0_DDC_SCL */
|
||||
PAD_CFG_NF(GPP_E13, NONE, DEEP, NF1),
|
||||
/* E14 : GPP_E14/DDI0_DDC_SDA */
|
||||
PAD_CFG_NF(GPP_E14, NONE, DEEP, NF1),
|
||||
/* E15 : GPP_E15/DDI1_DDC_SCL */
|
||||
PAD_CFG_NF(GPP_E15, NONE, DEEP, NF1),
|
||||
/* E16 : GPP_E16/DDI1_DDC_SDA */
|
||||
PAD_CFG_NF(GPP_E16, NONE, DEEP, NF1),
|
||||
|
||||
/* G0 : SD_CMD */
|
||||
PAD_NC(GPP_G0, NONE),
|
||||
/* G1 : SD_DATA0 */
|
||||
PAD_NC(GPP_G1, NONE),
|
||||
/* G2 : SD_DATA1 */
|
||||
PAD_NC(GPP_G2, NONE),
|
||||
/* G3 : SD_DATA2 */
|
||||
PAD_NC(GPP_G3, NONE),
|
||||
/* G4 : SD_DATA3 */
|
||||
PAD_NC(GPP_G4, NONE),
|
||||
/* G5 : SD_CD_ODL */
|
||||
PAD_NC(GPP_G5, NONE),
|
||||
/* G6 : SD_CLK */
|
||||
PAD_NC(GPP_G6, NONE),
|
||||
/* G7 : SD_SDIO_WP */
|
||||
PAD_NC(GPP_G7, NONE),
|
||||
|
||||
/* H4 : AP_I2C_TS_SDA */
|
||||
PAD_NC(GPP_H4, NONE),
|
||||
/* H5 : AP_I2C_TS_SCL */
|
||||
PAD_NC(GPP_H5, NONE),
|
||||
/* H6 : AP_I2C_CAM_SDA */
|
||||
PAD_NC(GPP_H6, NONE),
|
||||
/* H7 : AP_I2C_CAM_SCL */
|
||||
PAD_NC(GPP_H7, NONE),
|
||||
/* H15 : I2S_SPK_BCLK */
|
||||
PAD_NC(GPP_H15, NONE),
|
||||
|
||||
/* R6 : I2S_SPK_LRCK */
|
||||
PAD_NC(GPP_R6, NONE),
|
||||
/* R7 : I2S_SPK_AUDIO */
|
||||
PAD_NC(GPP_R7, NONE),
|
||||
|
||||
/* S2 : DMIC1_CLK */
|
||||
PAD_NC(GPP_S2, NONE),
|
||||
/* S3 : DMIC1_DATA */
|
||||
PAD_NC(GPP_S3, NONE),
|
||||
/* S6 : DMIC0_CLK */
|
||||
PAD_NC(GPP_S6, NONE),
|
||||
/* S7 : DMIC0_DATA */
|
||||
PAD_NC(GPP_S7, NONE),
|
||||
};
|
||||
|
||||
const struct pad_config *variant_override_gpio_table(size_t *num)
|
||||
{
|
||||
*num = ARRAY_SIZE(gpio_table);
|
||||
return gpio_table;
|
||||
}
|
||||
|
|
@ -8,10 +8,6 @@ chip soc/intel/jasperlake
|
|||
#| | required to set up a BAR |
|
||||
#| | for TPM communication |
|
||||
#| | before memory is up |
|
||||
#| I2C0 | Trackpad |
|
||||
#| I2C1 | Digitizer |
|
||||
#| I2C2 | Touchscreen |
|
||||
#| I2C3 | Camera |
|
||||
#| I2C4 | Audio |
|
||||
#+-------------------+---------------------------+
|
||||
register "common_soc_config" = "{
|
||||
|
|
@ -19,24 +15,245 @@ chip soc/intel/jasperlake
|
|||
.speed_mhz = 1,
|
||||
.early_init = 1,
|
||||
},
|
||||
.i2c[0] = {
|
||||
.speed = I2C_SPEED_FAST,
|
||||
},
|
||||
.i2c[1] = {
|
||||
.speed = I2C_SPEED_FAST,
|
||||
},
|
||||
.i2c[2] = {
|
||||
.speed = I2C_SPEED_FAST,
|
||||
},
|
||||
.i2c[3] = {
|
||||
.speed = I2C_SPEED_FAST,
|
||||
},
|
||||
.i2c[4] = {
|
||||
.speed_config[0] = {
|
||||
.speed = I2C_SPEED_FAST,
|
||||
.scl_lcnt = 190,
|
||||
.scl_hcnt = 100,
|
||||
.sda_hold = 40,
|
||||
}
|
||||
},
|
||||
}"
|
||||
|
||||
# Enable Root Port 3 (index 2) for LAN
|
||||
# External PCIe port 7 is mapped to PCIe Root Port 3
|
||||
register "PcieRpEnable[2]" = "1"
|
||||
register "PcieClkSrcUsage[4]" = "2"
|
||||
|
||||
# Enable Root Port 7 (index 6) for WLAN
|
||||
# External PCIe port 3 is mapped to PCIe Root Port 7
|
||||
register "PcieRpEnable[6]" = "1"
|
||||
register "PcieClkSrcUsage[3]" = "6"
|
||||
|
||||
# Disable PCIe Root Port 8
|
||||
register "PcieRpEnable[7]" = "0"
|
||||
|
||||
# Audio related configurations
|
||||
register "PchHdaAudioLinkDmicEnable[0]" = "0"
|
||||
register "PchHdaAudioLinkDmicEnable[1]" = "0"
|
||||
|
||||
# Disable SD card
|
||||
register "sdcard_cd_gpio" = "0"
|
||||
register "SdCardPowerEnableActiveHigh" = "0"
|
||||
|
||||
# Disable eDP on port A
|
||||
register "DdiPortAConfig" = "0"
|
||||
|
||||
# Enable HPD and DDC for DDI port A
|
||||
register "DdiPortAHpd" = "1"
|
||||
register "DdiPortADdc" = "1"
|
||||
|
||||
# USB Port Configuration
|
||||
register "usb2_ports[0]" = "{
|
||||
.enable = 1,
|
||||
.ocpin = OC_SKIP,
|
||||
.tx_bias = USB2_BIAS_0MV,
|
||||
.tx_emp_enable = USB2_PRE_EMP_ON,
|
||||
.pre_emp_bias = USB2_BIAS_11P25MV,
|
||||
.pre_emp_bit = USB2_HALF_BIT_PRE_EMP,
|
||||
}" # Type-C Port 0
|
||||
register "usb2_ports[1]" = "{
|
||||
.enable = 1,
|
||||
.ocpin = OC1,
|
||||
.tx_bias = USB2_BIAS_0MV,
|
||||
.tx_emp_enable = USB2_PRE_EMP_ON,
|
||||
.pre_emp_bias = USB2_BIAS_11P25MV,
|
||||
.pre_emp_bit = USB2_HALF_BIT_PRE_EMP,
|
||||
}" # Type-A Port A0
|
||||
register "usb2_ports[2]" = "{
|
||||
.enable = 1,
|
||||
.ocpin = OC2,
|
||||
.tx_bias = USB2_BIAS_0MV,
|
||||
.tx_emp_enable = USB2_PRE_EMP_ON,
|
||||
.pre_emp_bias = USB2_BIAS_11P25MV,
|
||||
.pre_emp_bit = USB2_HALF_BIT_PRE_EMP,
|
||||
}" # Type-A Port A1
|
||||
register "usb2_ports[3]" = "{
|
||||
.enable = 1,
|
||||
.ocpin = OC3,
|
||||
.tx_bias = USB2_BIAS_0MV,
|
||||
.tx_emp_enable = USB2_PRE_EMP_ON,
|
||||
.pre_emp_bias = USB2_BIAS_11P25MV,
|
||||
.pre_emp_bit = USB2_HALF_BIT_PRE_EMP,
|
||||
}" # Type-A Port A2
|
||||
register "usb2_ports[4]" = "{
|
||||
.enable = 1,
|
||||
.ocpin = OC0,
|
||||
.tx_bias = USB2_BIAS_0MV,
|
||||
.tx_emp_enable = USB2_PRE_EMP_ON,
|
||||
.pre_emp_bias = USB2_BIAS_11P25MV,
|
||||
.pre_emp_bit = USB2_HALF_BIT_PRE_EMP,
|
||||
}" # Type-A Port A3
|
||||
register "usb2_ports[5]" = "USB2_PORT_MID(OC_SKIP)" # PL2303
|
||||
|
||||
register "usb3_ports[1]" = "USB3_PORT_EMPTY" # No USB3/2 Type-C Port C1
|
||||
register "usb3_ports[4]" = "USB3_PORT_DEFAULT(OC_SKIP)" # USB3/1 Type-A Port A2
|
||||
register "usb3_ports[5]" = "USB3_PORT_DEFAULT(OC_SKIP)" # USB3/1 Type-A Port A3
|
||||
|
||||
device domain 0 on
|
||||
device pci 15.0 on end
|
||||
device pci 04.0 on
|
||||
chip drivers/intel/dptf
|
||||
## Passive Policy
|
||||
register "policies.passive" = "{
|
||||
[0] = DPTF_PASSIVE(CPU, CPU, 90, 10000),
|
||||
[1] = DPTF_PASSIVE(CPU, TEMP_SENSOR_0, 80, 60000),
|
||||
[2] = DPTF_PASSIVE(CPU, TEMP_SENSOR_1, 75, 15000),
|
||||
[3] = DPTF_PASSIVE(CPU, TEMP_SENSOR_2, 55, 15000)
|
||||
}"
|
||||
|
||||
## Critical Policy
|
||||
register "policies.critical" = "{
|
||||
[0] = DPTF_CRITICAL(CPU, 105, SHUTDOWN),
|
||||
[1] = DPTF_CRITICAL(TEMP_SENSOR_0, 90, SHUTDOWN),
|
||||
[2] = DPTF_CRITICAL(TEMP_SENSOR_1, 80, SHUTDOWN),
|
||||
[3] = DPTF_CRITICAL(TEMP_SENSOR_2, 80, SHUTDOWN)
|
||||
}"
|
||||
|
||||
register "controls.power_limits" = "{
|
||||
.pl1 = {
|
||||
.min_power = 3000,
|
||||
.max_power = 6000,
|
||||
.time_window_min = 1 * MSECS_PER_SEC,
|
||||
.time_window_max = 1 * MSECS_PER_SEC,
|
||||
.granularity = 100,
|
||||
},
|
||||
.pl2 = {
|
||||
.min_power = 20000,
|
||||
.max_power = 20000,
|
||||
.time_window_min = 1 * MSECS_PER_SEC,
|
||||
.time_window_max = 1 * MSECS_PER_SEC,
|
||||
.granularity = 1000,
|
||||
}
|
||||
}"
|
||||
|
||||
register "options.tsr[0].desc" = ""Memory""
|
||||
register "options.tsr[1].desc" = ""Power""
|
||||
register "options.tsr[2].desc" = ""Chassis""
|
||||
|
||||
## Charger Performance Control (Control, mA)
|
||||
register "controls.charger_perf" = "{
|
||||
[0] = { 255, 3000 },
|
||||
[1] = { 24, 1500 },
|
||||
[2] = { 16, 1000 },
|
||||
[3] = { 8, 500 }
|
||||
}"
|
||||
|
||||
device generic 0 on end
|
||||
end
|
||||
end # SA Thermal device
|
||||
device pci 14.0 on
|
||||
chip drivers/usb/acpi
|
||||
# TODO (b/264960828) verify PLD values
|
||||
device usb 0.0 on
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB2 Type-C Port C0""
|
||||
register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
|
||||
register "group" = "ACPI_PLD_GROUP(1, 1)"
|
||||
device usb 2.0 on end
|
||||
end
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB2 Type-A Port A0""
|
||||
register "type" = "UPC_TYPE_A"
|
||||
register "group" = "ACPI_PLD_GROUP(1, 2)"
|
||||
device usb 2.1 on end
|
||||
end
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB2 Type-A Port A1""
|
||||
register "type" = "UPC_TYPE_A"
|
||||
register "group" = "ACPI_PLD_GROUP(1, 3)"
|
||||
device usb 2.2 on end
|
||||
end
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB2 Type-A Port A2""
|
||||
register "type" = "UPC_TYPE_A"
|
||||
register "group" = "ACPI_PLD_GROUP(1, 4)"
|
||||
device usb 2.3 on end
|
||||
end
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB2 Type-A Port A3""
|
||||
register "type" = "UPC_TYPE_A"
|
||||
register "group" = "ACPI_PLD_GROUP(1, 5)"
|
||||
device usb 2.4 on end
|
||||
end
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB3 Type-C Port C0""
|
||||
register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
|
||||
register "group" = "ACPI_PLD_GROUP(1, 1)"
|
||||
device usb 3.0 on end
|
||||
end
|
||||
chip drivers/usb/acpi
|
||||
device usb 3.1 off end
|
||||
end
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB3 Type-A Port A0""
|
||||
register "type" = "UPC_TYPE_USB3_A"
|
||||
register "group" = "ACPI_PLD_GROUP(1, 2)"
|
||||
device usb 3.2 on end
|
||||
end
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB3 Type-A Port A1""
|
||||
register "type" = "UPC_TYPE_USB3_A"
|
||||
register "group" = "ACPI_PLD_GROUP(1, 3)"
|
||||
device usb 3.3 on end
|
||||
end
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB3 Type-A Port A2""
|
||||
register "type" = "UPC_TYPE_USB3_A"
|
||||
register "group" = "ACPI_PLD_GROUP(1, 4)"
|
||||
device usb 3.4 on end
|
||||
end
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB3 Type-A Port A3""
|
||||
register "type" = "UPC_TYPE_USB3_A"
|
||||
register "group" = "ACPI_PLD_GROUP(1, 5)"
|
||||
device usb 3.5 on end
|
||||
end
|
||||
end
|
||||
end
|
||||
end # USB xHCI
|
||||
device pci 15.0 off end # I2C 0
|
||||
device pci 15.1 off end # I2C 1
|
||||
device pci 15.2 off end # I2C 2
|
||||
device pci 15.3 off end # I2C 3
|
||||
device pci 19.0 on
|
||||
chip drivers/i2c/generic
|
||||
register "hid" = ""RTL5682""
|
||||
register "name" = ""RT58""
|
||||
register "desc" = ""Realtek RT5682""
|
||||
register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_D16)"
|
||||
register "property_count" = "1"
|
||||
register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER"
|
||||
register "property_list[0].name" = ""realtek,jd-src""
|
||||
register "property_list[0].integer" = "1"
|
||||
device i2c 1a on end
|
||||
end
|
||||
end # I2C 4
|
||||
device pci 1c.2 on
|
||||
chip drivers/net
|
||||
register "customized_leds" = "0x05af"
|
||||
register "wake" = "GPE0_DW0_03" # GPP_B3
|
||||
register "stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D4)"
|
||||
register "device_index" = "0"
|
||||
device pci 00.0 on end
|
||||
end
|
||||
end # PCI Express Root Port 3 - RTL8111H LAN
|
||||
device pci 1c.6 on
|
||||
chip drivers/wifi/generic
|
||||
register "wake" = "GPE0_DW2_03"
|
||||
device pci 00.0 on end
|
||||
end
|
||||
end # PCI Express Root Port 7 - WLAN
|
||||
device pci 1c.7 off end # PCI Express Root Port 8
|
||||
device pci 1f.3 on end # Intel HDA
|
||||
end
|
||||
end
|
||||
|
|
|
|||
Loading…
Reference in New Issue