diff --git a/src/cpu/amd/Kconfig b/src/cpu/amd/Kconfig index c98ec848bd..8286b2a85b 100644 --- a/src/cpu/amd/Kconfig +++ b/src/cpu/amd/Kconfig @@ -15,7 +15,5 @@ source src/cpu/amd/model_10xxx/Kconfig source src/cpu/amd/geode_gx2/Kconfig source src/cpu/amd/geode_lx/Kconfig -source src/cpu/amd/sc520/Kconfig - source src/cpu/amd/agesa/Kconfig source src/cpu/amd/pi/Kconfig diff --git a/src/cpu/amd/Makefile.inc b/src/cpu/amd/Makefile.inc index 3f39c94fc8..a73e25ff19 100644 --- a/src/cpu/amd/Makefile.inc +++ b/src/cpu/amd/Makefile.inc @@ -10,7 +10,6 @@ subdirs-$(CONFIG_CPU_AMD_SOCKET_ASB2) += socket_ASB2 subdirs-$(CONFIG_CPU_AMD_SOCKET_C32_NON_AGESA) += socket_C32 subdirs-$(CONFIG_CPU_AMD_GEODE_GX2) += geode_gx2 subdirs-$(CONFIG_CPU_AMD_GEODE_LX) += geode_lx -subdirs-$(CONFIG_CPU_AMD_SC520) += sc520 subdirs-$(CONFIG_CPU_AMD_SOCKET_S1G1) += socket_S1G1 subdirs-$(CONFIG_CPU_AMD_AGESA) += agesa diff --git a/src/cpu/amd/sc520/Kconfig b/src/cpu/amd/sc520/Kconfig deleted file mode 100644 index 7696b5cdcd..0000000000 --- a/src/cpu/amd/sc520/Kconfig +++ /dev/null @@ -1,5 +0,0 @@ -config CPU_AMD_SC520 - bool - select ARCH_BOOTBLOCK_X86_32 - select ARCH_ROMSTAGE_X86_32 - select ARCH_RAMSTAGE_X86_32 diff --git a/src/cpu/amd/sc520/Makefile.inc b/src/cpu/amd/sc520/Makefile.inc deleted file mode 100644 index 03f9e0f9bf..0000000000 --- a/src/cpu/amd/sc520/Makefile.inc +++ /dev/null @@ -1 +0,0 @@ -ramstage-y += sc520.c diff --git a/src/cpu/amd/sc520/raminit.c b/src/cpu/amd/sc520/raminit.c deleted file mode 100644 index f3f7071140..0000000000 --- a/src/cpu/amd/sc520/raminit.c +++ /dev/null @@ -1,643 +0,0 @@ -/* this setupcpu function comes from: */ -/*==============================================================================*/ -/* FILE : start16.asm*/ -/**/ -/* DESC : A 16 bit mode assembly language startup program, intended for*/ -/* use with on Aspen SC520 platforms.*/ -/**/ -/* 11/16/2000 Added support for the NetSC520*/ -/* 12/28/2000 Modified to boot linux image*/ -/**/ -/* =============================================================================*/ -/* */ -/* Copyright 2000 Advanced Micro Devices, Inc. */ -/* */ -/* This software is the property of Advanced Micro Devices, Inc (AMD) which */ -/* specifically grants the user the right to modify, use and distribute this */ -/* software provided this COPYRIGHT NOTICE is not removed or altered. All */ -/* other rights are reserved by AMD. */ -/* */ -/* THE MATERIALS ARE PROVIDED "AS IS" WITHOUT ANY EXPRESS OR IMPLIED WARRANTY */ -/* OF ANY KIND INCLUDING WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT OF */ -/* THIRD-PARTY INTELLECTUAL PROPERTY, OR FITNESS FOR ANY PARTICULAR PURPOSE.*/ -/* IN NO EVENT SHALL AMD OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER*/ -/* (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS*/ -/* INTERRUPTION, LOSS OF INFORMATION) ARISING OUT OF THE USE OF OR INABILITY*/ -/* TO USE THE MATERIALS, EVEN IF AMD HAS BEEN ADVISED OF THE POSSIBILITY OF*/ -/* SUCH DAMAGES. BECAUSE SOME JURSIDICTIONS PROHIBIT THE EXCLUSION OR*/ -/* LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE*/ -/* LIMITATION MAY NOT APPLY TO YOU.*/ -/**/ -/* AMD does not assume any responsibility for any errors that may appear in*/ -/* the Materials nor any responsibility to support or update the Materials.*/ -/* AMD retains the right to make changes to its test specifications at any*/ -/* time, without notice.*/ -/**/ -/* So that all may benefit from your experience, please report any problems */ -/* or suggestions about this software back to AMD. Please include your name, */ -/* company, telephone number, AMD product requiring support and question or */ -/* problem encountered. */ -/* */ -/* Advanced Micro Devices, Inc. Worldwide support and contact */ -/* Embedded Processor Division information available at: */ -/* Systems Engineering epd.support@amd.com*/ -/* 5204 E. Ben White Blvd. -or-*/ -/* Austin, TX 78741 http://www.amd.com/html/support/techsup.html*/ -/* ============================================================================*/ - - -#define OUTC(addr, val) *(unsigned char *)(addr) = (val) - -/* sadly, romcc can't quite handle what we want, so we do this ugly thing */ -#define drcctl (( volatile unsigned char *)0xfffef010) -#define drcmctl (( volatile unsigned char *)0xfffef012) -#define drccfg (( volatile unsigned char *)0xfffef014) - -#define drcbendadr (( volatile unsigned long *)0xfffef018) -#define eccctl (( volatile unsigned char *)0xfffef020) -#define dbctl (( volatile unsigned char *)0xfffef040) - -void setupsc520(void) -{ - volatile unsigned char *cp; - volatile unsigned short *sp; - volatile unsigned long *edi; - - /* do this to see if MMCR will start acting right. we suspect - * you have to do SOMETHING to get things going. I'm really - * starting to hate this processor. - */ - - /* no, that did not help. I wonder what will? - * outl(0x800df0cb, 0xfffc); - */ - - /* well, this is special! You have to do SHORT writes to the - * locations, even though they are CHAR in size and CHAR aligned - * and technically, a SHORT write will result in -- yoo ha! -- - * over writing the next location! Thanks to the u-boot guys - * for a reference code I can use. with these short pointers, - * it now reliably comes up after power cycle with printk. Ah yi - * yi. - */ - - /* turn off the write buffer*/ - /* per the note above, make this a short? Let's try it. */ - sp = (unsigned short *)0xfffef040; - *sp = 0; - - /* as per the book: */ - /* PAR register setup */ - /* set up the PAR registers as they are on the MSM586SEG */ - /* moved to romstage.c by Stepan, Ron says: */ - /* NOTE: move this to mainboard.c ASAP */ - setup_pars(); - - /* CPCSF register */ - sp = (unsigned short *)0xfffefc24; - *sp = 0xfe; - - /* ADDDECTL */ - sp = (unsigned short *)0xfffefc80; - *sp = 0x10; - - /* byte writes in AMD assembly */ - /* we do short anyway, since u-boot does ... */ - /*set the GP CS offset*/ - sp = (unsigned short *)0xfffefc08; - *sp = 0x00001; - /*set the GP CS width*/ - sp = (unsigned short *)0xfffefc09; - *sp = 0x00003; - - /* short writes in AMD assembly */ - /*set the GP CS width*/ - sp = (unsigned short *)0xfffefc0a; - *sp = 0x00001; - /*set the RD pulse width*/ - sp = (unsigned short *)0xfffefc0b; - *sp = 0x00003; - /*set the GP RD offset */ - sp = (unsigned short *)0xfffefc0c; - *sp = 0x00001; - /*set the GP WR pulse width*/ - sp = (unsigned short *)0xfffefc0d; - *sp = 0x00003; - /*set the GP WR offset*/ - sp = (unsigned short *)0xfffefc0e; - *sp = 0x00001; - - - /* set up the GP IO pins*/ - /*set the GPIO directionreg*/ - sp = (unsigned short *)0xfffefc2c; - *sp = 0x00000; - /*set the GPIO directionreg*/ - sp = (unsigned short *)0xfffefc2a; - *sp = 0x00000; - /*set the GPIO pin function 31-16 reg*/ - sp = (unsigned short *)0xfffefc22; - *sp = 0x0FFFF; - /*set the GPIO pin function 15-0 reg*/ - sp = (unsigned short *)0xfffefc20; - *sp = 0x0FFFF; - - - /* the 0x80 led should now be working*/ - post_code(0xaa); -#if 0 - /* wtf are 680 leds ... *//* <-- WTF is this comment? */ - par = (unsigned long *) 0xfffef0c4; - *par = 0x28000680; - /* well? */ - post_code(0x55); -#endif - - /* set the uart baud rate clocks to the normal 1.8432 MHz.*/ - /* enable interrupts here? Why not? */ - cp = (unsigned char *)0xfffefcc0; - *cp = 4 | 3; /* uart 1 clock source */ - cp = (unsigned char *)0xfffefcc4; - *cp = 4; /* uart 2 clock source */ - -#if 0 -/*; set the interrupt mapping registers.*/ - cp = (unsigned char *)0x0fffefd20; - *cp = 0x01; - - cp = (unsigned char *)0x0fffefd28; - *cp = 0x0c; - - cp = (unsigned char *)0x0fffefd29; - *cp = 0x0b; - - cp = (unsigned char *)0x0fffefd30; - *cp = 0x07; - - cp = (unsigned char *)0x0fffefd43; - *cp = 0x03; - - cp = (unsigned char *)0x0fffefd51; - *cp = 0x02; -#endif - -/* Stepan says: This needs to go to the msm586seg code */ -/* "enumerate" the PCI. Mainly set the interrupt bits on the PCnetFast. */ - outl(0x08000683c, 0xcf8); - outl(0xc, 0xcfc); /* set the interrupt line */ - - - /* Set the SC520 PCI host bridge to target mode to - * allow external bus mastering events - */ - /* index the status command register on device 0*/ - outl(0x080000004, 0x0cf8); - outl(0x2, 0xcfc); /*set the memory access enable bit*/ - OUTC(0x0fffef072, 1); /* enable req bits in SYSARBMENB */ -} - - -/* - * - * - */ - - - -#define CACHELINESZ 0x00000010 /* size of our cache line (read buffer)*/ - -#define COL11_ADR *(unsigned int *)0x0e001e00 /* 11 col addrs*/ -#define COL10_ADR *(unsigned int *)0x0e000e00 /* 10 col addrs*/ -#define COL09_ADR *(unsigned int *)0x0e000600 /* 9 col addrs*/ -#define COL08_ADR *(unsigned int *)0x0e000200 /* 8 col addrs*/ - -#define ROW14_ADR *(unsigned int *)0x0f000000 /* 14 row addrs*/ -#define ROW13_ADR *(unsigned int *)0x07000000 /* 13 row addrs*/ -#define ROW12_ADR *(unsigned int *)0x03000000 /* 12 row addrs*/ -#define ROW11_ADR *(unsigned int *)0x01000000 /* 11 row addrs/also bank switch*/ -#define ROW10_ADR *(unsigned int *)0x00000000 /* 10 row addrs/also bank switch*/ - -#define COL11_DATA 0x0b0b0b0b /* 11 col addrs*/ -#define COL10_DATA 0x0a0a0a0a /* 10 col data*/ -#define COL09_DATA 0x09090909 /* 9 col data*/ -#define COL08_DATA 0x08080808 /* 8 col data*/ - -#define ROW14_DATA 0x3f3f3f3f /* 14 row data (MASK)*/ -#define ROW13_DATA 0x1f1f1f1f /* 13 row data (MASK)*/ -#define ROW12_DATA 0x0f0f0f0f /* 12 row data (MASK)*/ -#define ROW11_DATA 0x07070707 /* 11 row data/also bank switch (MASK)*/ -#define ROW10_DATA 0xaaaaaaaa /* 10 row data/also bank switch (MASK)*/ - -void -dummy_write(void){ - volatile unsigned short *ptr = (volatile unsigned short *)CACHELINESZ; - *ptr = 0; -} - -#include "drivers/pc80/udelay_io.c" - -static void dumpram(void){ - print_err("ctl "); print_err_hex8(*drcctl); print_err("\n"); - print_err("mctl "); print_err_hex8(*drcmctl); print_err("\n"); - print_err("cfg "); print_err_hex8(*drccfg); print_err("\n"); - - print_err("bendadr0 "); print_err_hex8(*drcbendadr); print_err("\n"); - print_err("bendadr1 "); print_err_hex8(*drcbendadr); print_err("\n"); - print_err("bendadr2 "); print_err_hex8(*drcbendadr); print_err("\n"); - print_err("bendadr3"); print_err_hex8(*drcbendadr); print_err("\n"); -} - -/* there is a lot of silliness in the amd code, and it is - * causing romcc real headaches, so we're going to be be a little - * less silly. - * so, the order of ops is: - * for i in 3 to 0 - * see if bank is there. - * if we can write a word, and read it back, to hell with paranoia - * the bank is there. So write the magic byte, read it back, and - * use that to get size, etc. Try to keep things very simple, - * so people can actually follow the damned code. - */ - -/* cache is assumed to be disabled */ -int sizemem(void) -{ - - int rows,banks, cols, i, bank; - unsigned char al; - volatile unsigned long *lp = (volatile unsigned long *) CACHELINESZ; - unsigned long l; - /* initialize dram controller registers */ - /* disable write buffer/read-ahead buffer */ - *dbctl = 0; - /* no ecc interrupts of any kind. */ - *eccctl = 0; - /* Set SDRAM timing for slowest speed. */ - *drcmctl = 0x1e; - - /* setup dram register for all banks - * with max cols and max banks - * this is the oldest trick in the book. You are going to set up for max rows - * and cols, then do a write, then see if the data is wrapped to low memory. - * you can actually tell by which data gets to which low memory, - * exactly how many rows and cols you have. - */ - *drccfg=0xbbbb; - - /* setup loop to do 4 external banks starting with bank 3 */ - *drcbendadr=0x0ff000000; - /* for now, set it up for one loop of bank 0. Just to get it to go at all. */ - *drcbendadr=0x0ff; - - /* issue a NOP to all DRAMs */ - /* Setup DRAM control register with Disable refresh, - * disable write buffer Test Mode and NOP command select - */ - *drcctl=0x01; - - /* dummy write for NOP to take effect */ - dummy_write(); - print_err("NOP\n"); - /* 100? 200? */ - udelay(100); - print_err("after udelay\n"); - - /* issue all banks precharge */ - *drcctl=0x02; - print_err("set *drcctl to 2 \n"); - dummy_write(); - print_err("PRE\n"); - - /* issue 2 auto refreshes to all banks */ - *drcctl=0x04; - dummy_write(); - print_err("AUTO1\n"); - dummy_write(); - print_err("AUTO2\n"); - - /* issue LOAD MODE REGISTER command */ - *drcctl=0x03; - dummy_write(); - print_err("LOAD MODE REG\n"); - - *drcctl=0x04; - for (i=0; i<8; i++) /* refresh 8 times */{ - dummy_write(); - print_err("dummy write\n"); - } - print_err("8 dummy writes\n"); - - /* set control register to NORMAL mode */ - *drcctl=0x00; - print_err("normal\n"); - - print_err("HI done normal\n"); - - print_err("sizemem\n"); - for(bank = 3; bank >= 0; bank--) { - print_err("Try to assign to l\n"); - *lp = 0xdeadbeef; - print_err("assigned l ... \n"); - if (*lp != 0xdeadbeef) { - print_err(" no memory at bank "); - // print_err_hex8(bank); - // print_err(" value "); print_err_hex32(*lp); - print_err("\n"); - // continue; - } - *drcctl = 2; - dummy_write(); - *drccfg = *drccfg >> 4; - l = *drcbendadr; - l >>= 8; - *drcbendadr = l; - print_err("loop around\n"); - *drcctl = 0; - dummy_write(); - } -#if 0 - /* enable last bank and setup ending address - * register for max ram in last bank - */ - *drcbendadr=0x0ff000000; - - -// dumpram(); - - /* issue a NOP to all DRAMs */ - /* Setup DRAM control register with Disable refresh, - * disable write buffer Test Mode and NOP command select - */ - *drcctl=0x01; - - /* dummy write for NOP to take effect */ - dummy_write(); - print_err("NOP\n"); - /* 100? 200? */ - //udelay(100); - print_err("after udelay\n"); - - /* issue all banks precharge */ - *drcctl=0x02; - print_err("set *drcctl to 2 \n"); - dummy_write(); - print_err("PRE\n"); - - /* issue 2 auto refreshes to all banks */ - *drcctl=0x04; - dummy_write(); - print_err("AUTO1\n"); - dummy_write(); - print_err("AUTO2\n"); - - /* issue LOAD MODE REGISTER command */ - *drcctl=0x03; - dummy_write(); - print_err("LOAD MODE REG\n"); - - *drcctl=0x04; - for (i=0; i<8; i++) /* refresh 8 times */{ - dummy_write(); - print_err("dummy write\n"); - } - print_err("8 dummy writes\n"); - - /* set control register to NORMAL mode */ - *drcctl=0x00; - print_err("normal\n"); - - print_err("HI done normal\n"); - bank = 3; - - - /* this is really ugly, it is right from assembly code. - * we need to clean it up later - */ - -start: - /* write col 11 wrap adr */ - COL11_ADR=COL11_DATA; - if(COL11_ADR!=COL11_DATA) - goto bad_ram; - -print_err("11\n"); - /* write col 10 wrap adr */ - COL10_ADR=COL10_DATA; - if(COL10_ADR!=COL10_DATA) - goto bad_ram; -print_err("10\n"); - - /* write col 9 wrap adr */ - COL09_ADR=COL09_DATA; - if(COL09_ADR!=COL09_DATA) - goto bad_ram; -print_err("9\n"); - - /* write col 8 wrap adr */ - COL08_ADR=COL08_DATA; - if(COL08_ADR!=COL08_DATA) - goto bad_ram; -print_err("8\n"); - - /* write row 14 wrap adr */ - ROW14_ADR=ROW14_DATA; - if(ROW14_ADR!=ROW14_DATA) - goto bad_ram; -print_err("14\n"); - - /* write row 13 wrap adr */ - ROW13_ADR=ROW13_DATA; - if(ROW13_ADR!=ROW13_DATA) - goto bad_ram; -print_err("13\n"); - - /* write row 12 wrap adr */ - ROW12_ADR=ROW12_DATA; - if(ROW12_ADR!=ROW12_DATA) - goto bad_ram; -print_err("12\n"); - - /* write row 11 wrap adr */ - ROW11_ADR=ROW11_DATA; - if(ROW11_ADR!=ROW11_DATA) - goto bad_ram; -print_err("11\n"); - - /* write row 10 wrap adr */ - ROW10_ADR=ROW10_DATA; - if(ROW10_ADR!=ROW10_DATA) - goto bad_ram; -print_err("10\n"); - -/* - * read data @ row 12 wrap adr to determine # banks, - * and read data @ row 14 wrap adr to determine # rows. - * if data @ row 12 wrap adr is not AA, 11 or 12 we have bad RAM. - * if data @ row 12 wrap == AA, we only have 2 banks, NOT 4 - * if data @ row 12 wrap == 11 or 12, we have 4 banks - */ - - banks=2; - if (ROW12_ADR != ROW10_DATA) { - banks=4; -print_err("4b\n"); - if(ROW12_ADR != ROW11_DATA) { - if(ROW12_ADR != ROW12_DATA) - goto bad_ram; - } - } - - /* validate row mask */ - rows=ROW14_ADR; - if (rowsROW14_DATA) - goto bad_ram; - /* verify all 4 bytes of dword same */ -/* - if(rows&0xffff!=(rows>>16)&0xffff) - goto bad_ram; - if(rows&0xff!=(rows>>8)&0xff) - goto bad_ram; -*/ - /* now just get one of them */ - rows &= 0xff; - print_err("rows"); print_err_hex32(rows); print_err("\n"); - /* validate column data */ - cols=COL11_ADR; - if(colsCOL11_DATA) - goto bad_ram; - /* verify all 4 bytes of dword same */ -/* - if(cols&0xffff!=(cols>>16)&0xffff) - goto bad_ram; - if(cols&0xff!=(cols>>8)&0xff) - goto bad_ram; -*/ - print_err("cols"); print_err_hex32(cols); print_err("\n"); - cols -= COL08_DATA; - - /* cols now is in the range of 0 1 2 3 ... - */ - i = cols&3; - // i = cols + rows; - - /* wacky end addr calculation */ -/* - al = 3; - al -= (i & 0xff);k - */ - - /* what a fookin' mess this is */ - if(banks==4) - i+=8; /* <-- i holds merged value */ - /* i now has the col width in bits 0-1 and the bank count (2 or 4) - * in bit 3. - * this is the format for the drccfg register - */ - - /* fix ending addr mask*/ - /*FIXME*/ - /* let's just go with this to start ... see if we can get ANYWHERE */ - /* need to get end addr. Need to do it with the bank in mind. */ -/* - al = 3; - al -= i&3; - *drcbendaddr = rows >> al; - print_err("computed ending_adr = "); print_err_hex8(ending_adr); - print_err("\n"); - -*/ -bad_reinit: - /* issue all banks recharge */ - *drcctl=0x02; - dummy_write(); - - /* update ending address register */ -// *drcbendadr = ending_adr; - - /* update config register */ - *drccfg &= ~(0xff << bank*4); - if (ending_adr) - *drccfg = ((banks == 4 ? 8 : 0) | cols & 3)<< (bank*4); -// dumpram(); - /* skip the rest for now */ - // bank = 0; - // *drccfg=*drccfg&YYY|ZZZZ; - - if(bank!=0) { - bank--; -// drcbendaddr--; - *drcbendaddr = 0xff000000; - //*(&*drcbendadr+XXYYXX)=0xff; - goto start; - } - - /* set control register to NORMAL mode */ - *drcctl=0x18; - dummy_write(); - return bank; - -bad_ram: - print_info("bad ram!\n"); - /* you are here because the read-after-write failed, - * in most cases because: no ram in that bank! - * set badbank to 1 and go to reinit - */ - ending_adr = 0; - goto bad_reinit; - while(1) - print_err("DONE NEXTBANK\n"); -#endif -} - -/* note: based on AMD code*/ -/* This code is known to work on the digital logic board and on the technologic - * systems ts5300 - */ -int staticmem(void) -{ - volatile unsigned long *zero = (unsigned long *) CACHELINESZ; - - /* set up 0x18 .. **/ - *drcbendadr = 0x88; - *drcmctl = 0x1e; - *drccfg = 0x9; - /* nop mode */ - *drcctl = 0x1; - /* do the dummy write */ - *zero = 0; - - /* precharge */ - *drcctl = 2; - *zero = 0; - - /* two autorefreshes */ - *drcctl = 4; - *zero = 0; - print_debug("one zero out on refresh\n"); - *zero = 0; - print_debug("two zero out on refresh\n"); - - /* load mode register */ - *drcctl = 3; - *zero = 0; - print_debug("DONE the load mode reg\n"); - - /* normal mode */ - *drcctl = 0x0; - *zero = 0; - print_debug("DONE one last write and then turn on refresh etc\n"); - *drcctl = 0x18; - *zero = 0; - print_debug("DONE the normal\n"); - *zero = 0xdeadbeef; - if (*zero != 0xdeadbeef) - print_debug("NO LUCK\n"); - else - print_debug("did a store and load ...\n"); - //print_err_hex32(*zero); - // print_err(" zero is now "); print_err_hex32(*zero); print_err("\n"); -} diff --git a/src/cpu/amd/sc520/sc520.c b/src/cpu/amd/sc520/sc520.c deleted file mode 100644 index 05215447c0..0000000000 --- a/src/cpu/amd/sc520/sc520.c +++ /dev/null @@ -1,200 +0,0 @@ -/* - * This file needs a major cleanup. Too much #if 0 code - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/* - * set up basic things ... - * PAR should NOT go here, as it might change with the mainboard. - */ -static void cpu_init(device_t dev) -{ - unsigned long *l = (unsigned long *) 0xfffef088; - int i; - for(i = 0; i < 16; i++, l++) - printk(BIOS_ERR, "Par%d: 0x%lx\n", i, *l); - - printk(BIOS_SPEW, "SC520 random fixup ...\n"); -} - - -/* Ollie says: make a northbridge/amd/sc520. Ron sez: - * there is no real northbridge, keep it here in cpu. - * Ron wins, he's writing the code. - */ -static void sc520_enable_resources(struct device *dev) { - unsigned char command; - - printk(BIOS_SPEW, "%s\n", __func__); - command = pci_read_config8(dev, PCI_COMMAND); - printk(BIOS_SPEW, "========>%s, command 0x%x\n", __func__, command); - command |= PCI_COMMAND_MEMORY | PCI_COMMAND_PARITY | PCI_COMMAND_SERR; - printk(BIOS_SPEW, "========>%s, command 0x%x\n", __func__, command); - pci_write_config8(dev, PCI_COMMAND, command); - command = pci_read_config8(dev, PCI_COMMAND); - printk(BIOS_SPEW, "========>%s, command 0x%x\n", __func__, command); -} - -static void sc520_read_resources(device_t dev) -{ - struct resource* res; - - pci_dev_read_resources(dev); - - res = new_resource(dev, 1); - res->base = 0x0UL; - res->size = 0x400UL; - res->limit = 0xffffUL; - res->flags = IORESOURCE_IO | IORESOURCE_ASSIGNED | IORESOURCE_FIXED; - - res = new_resource(dev, 3); /* IOAPIC */ - res->base = IO_APIC_ADDR; - res->size = 0x00001000; - res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED | IORESOURCE_FIXED; -} - - -static struct device_operations cpu_operations = { - .read_resources = sc520_read_resources, - .set_resources = pci_dev_set_resources, - .enable_resources = sc520_enable_resources, - .init = cpu_init, - .enable = 0, - .ops_pci = 0, -}; - -static const struct pci_driver cpu_driver __pci_driver = { - .ops = &cpu_operations, - .vendor = PCI_VENDOR_ID_AMD, - .device = 0x3000 -}; - -static void pci_domain_set_resources(device_t dev) -{ - device_t mc_dev; - uint32_t pci_tolm; - printk(BIOS_SPEW, "%s\n", __func__); - pci_tolm = find_pci_tolm(dev->link_list); - mc_dev = dev->link_list->children; - if (mc_dev) { - unsigned long tomk, tolmk; - // unsigned char rambits; - // int i; - int idx; -#if 0 - for(rambits = 0, i = 0; i < ARRAY_SIZE(ramregs); i++) { - unsigned char reg; - reg = pci_read_config8(mc_dev, ramregs[i]); - /* these are ENDING addresses, not sizes. - * if there is memory in this slot, then reg will be > rambits. - * So we just take the max, that gives us total. - * We take the highest one to cover for once and future coreboot - * bugs. We warn about bugs. - */ - if (reg > rambits) - rambits = reg; - if (reg < rambits) - printk(BIOS_ERR, "ERROR! register 0x%x is not set!\n", - ramregs[i]); - } - printk(BIOS_DEBUG, "I would set ram size to 0x%x Kbytes\n", (rambits)*8*1024); - tomk = rambits*8*1024; -#endif - tomk = 32 * 1024; - /* Compute the top of Low memory */ - tolmk = pci_tolm >> 10; - if (tolmk >= tomk) { - /* The PCI hole does does not overlap the memory. - */ - tolmk = tomk; - } - /* Report the memory regions */ - idx = 10; - ram_resource(dev, idx++, 0, tolmk); - } - assign_resources(dev->link_list); -} - -#if 0 -void sc520_enable_resources(device_t dev) { - - printk(BIOS_SPEW, "%s\n", __func__); - printk(BIOS_SPEW, "THIS IS FOR THE SC520 =============================\n"); - -/* - command = pci_read_config8(dev, PCI_COMMAND); - printk(BIOS_SPEW, "%s, command 0x%x\n", __func__, command); - command |= PCI_COMMAND_MEMORY; - printk(BIOS_SPEW, "%s, command 0x%x\n", __func__, command); - pci_write_config8(dev, PCI_COMMAND, command); - command = pci_read_config8(dev, PCI_COMMAND); - printk(BIOS_SPEW, "%s, command 0x%x\n", __func__, command); - */ - enable_childrens_resources(dev); - printk(BIOS_SPEW, "%s\n", __func__); -} -#endif - -static struct device_operations pci_domain_ops = { - .read_resources = pci_domain_read_resources, - .set_resources = pci_domain_set_resources, - /* - * If enable_resources is set to the generic enable_resources - * function the whole thing will hang in an endless loop on - * the ts5300. If this is really needed on another platform, - * something is conceptually wrong. - */ - .enable_resources = 0, //enable_resources, - .init = 0, - .scan_bus = pci_domain_scan_bus, - .ops_pci_bus = pci_bus_default_ops, -}; - -#if 0 -static void cpu_bus_init(device_t dev) -{ - printk(BIOS_SPEW, "cpu_bus_init\n"); -} - -static struct device_operations cpu_bus_ops = { - .read_resources = DEVICE_NOOP, - .set_resources = DEVICE_NOOP, - .enable_resources = DEVICE_NOOP, - .init = cpu_bus_init, - .scan_bus = 0, -}; -#endif - -static void enable_dev(struct device *dev) -{ - printk(BIOS_SPEW, "%s\n", __func__); - /* Set the operations if it is a special bus type */ - if (dev->path.type == DEVICE_PATH_DOMAIN) { - dev->ops = &pci_domain_ops; - } -#if 0 - /* This is never hit as none of the sc520 boards have - * an APIC cluster defined - */ - else if (dev->path.type == DEVICE_PATH_CPU_CLUSTER) { - dev->ops = &cpu_bus_ops; - } -#endif -} - - -struct chip_operations cpu_amd_sc520_ops = { - CHIP_NAME("AMD Elan SC520 CPU") - .enable_dev = enable_dev, -}; diff --git a/src/mainboard/Kconfig b/src/mainboard/Kconfig index 6ba6b718b1..610bfbb510 100644 --- a/src/mainboard/Kconfig +++ b/src/mainboard/Kconfig @@ -120,8 +120,6 @@ config VENDOR_SUPERMICRO bool "Supermicro" config VENDOR_TECHNEXION bool "Technexion" -config VENDOR_TECHNOLOGIC - bool "Technologic" config VENDOR_TI bool "TI" config VENDOR_THOMSON @@ -197,7 +195,6 @@ source "src/mainboard/soyo/Kconfig" source "src/mainboard/sunw/Kconfig" source "src/mainboard/supermicro/Kconfig" source "src/mainboard/technexion/Kconfig" -source "src/mainboard/technologic/Kconfig" source "src/mainboard/thomson/Kconfig" source "src/mainboard/ti/Kconfig" source "src/mainboard/traverse/Kconfig" diff --git a/src/mainboard/digitallogic/Kconfig b/src/mainboard/digitallogic/Kconfig index 9f490b0dc2..8aff47cd47 100644 --- a/src/mainboard/digitallogic/Kconfig +++ b/src/mainboard/digitallogic/Kconfig @@ -5,15 +5,12 @@ choice config BOARD_DIGITALLOGIC_ADL855PC bool "smartModule855" -config BOARD_DIGITALLOGIC_MSM586SEG - bool "MSM586SEG" config BOARD_DIGITALLOGIC_MSM800SEV bool "MSM800SEV" endchoice source "src/mainboard/digitallogic/adl855pc/Kconfig" -source "src/mainboard/digitallogic/msm586seg/Kconfig" source "src/mainboard/digitallogic/msm800sev/Kconfig" config MAINBOARD_VENDOR diff --git a/src/mainboard/digitallogic/msm586seg/Kconfig b/src/mainboard/digitallogic/msm586seg/Kconfig deleted file mode 100644 index 4cd6f11430..0000000000 --- a/src/mainboard/digitallogic/msm586seg/Kconfig +++ /dev/null @@ -1,23 +0,0 @@ -if BOARD_DIGITALLOGIC_MSM586SEG - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_SC520 - select HAVE_PIRQ_TABLE - select HAVE_OPTION_TABLE - select BOARD_ROMSIZE_KB_512 - select ROMCC - -config MAINBOARD_DIR - string - default digitallogic/msm586seg - -config MAINBOARD_PART_NUMBER - string - default "MSM586SEG" - -config IRQ_SLOT_COUNT - int - default 2 - -endif # BOARD_DIGITALLOGIC_MSM586SEG diff --git a/src/mainboard/digitallogic/msm586seg/board_info.txt b/src/mainboard/digitallogic/msm586seg/board_info.txt deleted file mode 100644 index 90fda6d555..0000000000 --- a/src/mainboard/digitallogic/msm586seg/board_info.txt +++ /dev/null @@ -1,2 +0,0 @@ -Category: half -Board URL: http://www.digitallogic.ch/english/products/datasheets/ms_pc104_detail.asp?id=MSM586SEG diff --git a/src/mainboard/digitallogic/msm586seg/cmos.layout b/src/mainboard/digitallogic/msm586seg/cmos.layout deleted file mode 100644 index 9050c3db7a..0000000000 --- a/src/mainboard/digitallogic/msm586seg/cmos.layout +++ /dev/null @@ -1,72 +0,0 @@ -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -#96 288 r 0 temporary_filler -0 384 r 0 reserved_memory -384 1 e 4 boot_option -385 1 e 4 last_boot -386 1 e 1 ECC_memory -388 4 r 0 reboot_bits -392 3 e 5 baud_rate -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -416 4 e 7 boot_first -420 4 e 7 boot_second -424 4 e 7 boot_third -428 4 h 0 boot_index -432 8 h 0 boot_countdown -1008 16 h 0 check_sum - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Network -7 1 HDD -7 2 Floppy -7 8 Fallback_Network -7 9 Fallback_HDD -7 10 Fallback_Floppy -#7 3 ROM - -checksums - -checksum 392 1007 1008 diff --git a/src/mainboard/digitallogic/msm586seg/devicetree.cb b/src/mainboard/digitallogic/msm586seg/devicetree.cb deleted file mode 100644 index e43ebff946..0000000000 --- a/src/mainboard/digitallogic/msm586seg/devicetree.cb +++ /dev/null @@ -1,7 +0,0 @@ -chip cpu/amd/sc520 - device domain 0 on - device pci 0.0 on end - device pci 12.0 on end # enet - device pci 14.0 on end # 69000 - end -end diff --git a/src/mainboard/digitallogic/msm586seg/irq_tables.c b/src/mainboard/digitallogic/msm586seg/irq_tables.c deleted file mode 100644 index 15dcddde12..0000000000 --- a/src/mainboard/digitallogic/msm586seg/irq_tables.c +++ /dev/null @@ -1,31 +0,0 @@ -/* This file was generated by getpir.c, do not modify! - (but if you do, please run checkpir on it to verify) - * Contains the IRQ Routing Table dumped directly from your memory, which BIOS sets up - * - * Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM -*/ - -#include - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32+16*CONFIG_IRQ_SLOT_COUNT, /* there can be total CONFIG_IRQ_SLOT_COUNT devices on the bus */ - 0x00, /* Where the interrupt router lies (bus) */ - (0x00<<3)|0x0, /* Where the interrupt router lies (dev) */ - 0, /* IRQs devoted exclusively to PCI usage */ - 0x8086, /* Vendor */ - 0x122e, /* Device */ - 0, /* Miniport data */ - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0x50, /* u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ - { - /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - {0x00,(0x12<<3)|0x0, {{0x30, 0x8000}, {0x00, 0x0}, {0x00, 0x0}, {0x00, 0x00}}, 0x0, 0x0}, - {0x00,(0x14<<3)|0x0, {{0x30, 0x8000}, {0x31, 0x0}, {0x32, 0x0}, {0x33, 0x00}}, 0x0, 0x0}, - } -}; -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/digitallogic/msm586seg/mainboard.c b/src/mainboard/digitallogic/msm586seg/mainboard.c deleted file mode 100644 index 0310176cb3..0000000000 --- a/src/mainboard/digitallogic/msm586seg/mainboard.c +++ /dev/null @@ -1,133 +0,0 @@ -#include -#include -#include -#include -#include -#include - - -static void irqdump(void) -{ - volatile unsigned char *irq; - void *mmcr; - int i; - int irqlist[] = {0xd00, 0xd02, 0xd03, 0xd04, 0xd08, 0xd0a, - 0xd14, 0xd18, 0xd1a, 0xd1b, 0xd1c, - 0xd20, 0xd21, 0xd22, 0xd28, 0xd29, - 0xd30, 0xd31, 0xd32, 0xd33, - 0xd40, 0xd41, 0xd42, 0xd43,0xd44, 0xd45, 0xd46, - 0xd50, 0xd51, 0xd52, 0xd53,0xd54, 0xd55, 0xd56, 0xd57,0xd58, 0xd59, 0xd5a, - -1}; - mmcr = (void *) 0xfffef000; - - printk(BIOS_ERR, "mmcr is %p\n", mmcr); - for(i = 0; irqlist[i] >= 0; i++) { - irq = mmcr + irqlist[i]; - printk(BIOS_ERR, "0x%x register @%p is 0x%x\n", irqlist[i], irq, *irq); - } - -} - -/* TODO: finish up mmcr struct in sc520.h, and; - - set ADDDECTL (now done in raminit.c in cpu/amd/sc520 -*/ -static void mainboard_enable(struct device *dev) -{ - //volatile struct mmcrpic *pic = MMCRPIC; - volatile struct mmcr *mmcr = MMCRDEFAULT; - - /* msm586seg has this register set to a weird value. - * follow the board, not the manual! - */ - - /* currently, nothing in the device to use, so ignore it. */ - printk(BIOS_ERR, "digital logic msm586 seg ENTER %s\n", __func__); - - - /* from fuctory bios */ - /* NOTE: the following interrupt settings made interrupts work - * for hard drive, and serial, but not for ethernet - */ - /* just do what they say and nobody gets hurt. */ - mmcr->pic.pcicr = 0 ; // M_GINT_MODE | M_S1_MODE | M_S2_MODE; - /* all ints to level */ - mmcr->pic.mpicmode = 0; - mmcr->pic.sl1picmode = 0; - mmcr->pic.sl2picmode = 0x80; - - mmcr->pic.intpinpol = 0; - - mmcr->pic.pit0map = 1; - mmcr->pic.uart1map = 0xc; - mmcr->pic.uart2map = 0xb; - mmcr->pic.rtcmap = 3; - mmcr->pic.ferrmap = 8; - mmcr->pic.gp0imap = 6; - mmcr->pic.gp1imap = 2; - mmcr->pic.gp2imap = 7; - mmcr->pic.gp6imap = 0x15; - mmcr->pic.gp7imap = 0x16; - mmcr->pic.gp10imap = 0x9; - mmcr->pic.gp9imap = 0x4; - - irqdump(); - printk(BIOS_ERR, "uart 1 ctl is 0x%x\n", *(unsigned char *) 0xfffefcc0); - - printk(BIOS_ERR, "0xc20 ctl is 0x%x\n", *(unsigned short *) 0xfffefc20); - printk(BIOS_ERR, "0xc22 0x%x\n", *(unsigned short *) 0xfffefc22); - - /* The following block has NOT proven sufficient to get - * the VGA hardware to talk to us - */ - /* let's set some mmcr stuff per the BIOS settings */ - mmcr->dbctl.dbctl = 0x10; - mmcr->sysarb.ctl = 6; - mmcr->sysarb.menb = 0xf; - mmcr->sysarb.prictl = 0xc0000f0f; - /* this is bios setting, depends on sysarb above */ - mmcr->hostbridge.ctl = 0x108; - printk(BIOS_ERR, "digital logic msm586 seg EXIT %s\n", __func__); - - /* pio */ - mmcr->pio.data31_16 = 0xffbf; - - /* pci stuff */ - mmcr->pic.pciintamap = 0xa; - - /* END block where vga hardware still will not talk to us */ - /* all we get from VGA I/O addresses are ffff etc. - */ - mmcr->sysmap.adddecctl = 0x10; - - /* VGA now talks to us, so this adddecctl was the trick. - * still no interrupts from enet. - * Let's try fixing the piodata stuff, as there may be - * some wire there not documented. - */ - mmcr->pio.data31_16 = 0xffbf; - /* also, our sl?picmode needs to match fuctory bios */ - mmcr->pic.sl1picmode = 0x80; - mmcr->pic.sl2picmode = 0x0; - /* and, finally, they do set gp5imap and we don't. - */ - mmcr->pic.gp5imap = 0xd; - /* remaining problem: almost certainly, the irq table is bogus - * NO SHOCK as it came from fuctory bios. - * but let's try these 4 changes for now and see what shakes. - */ - /* still not interrupts. */ - /* their IRQ table is wrong. Just hardwire it */ - { - unsigned char pciints[4] = {15, 15, 15, 15}; - pci_assign_irqs(0, 12, pciints); - } - /* the assigned failed but we just noticed -- there is no - * dma mapping, and selftest on e100 requires that dma work - */ - /* follow fuctory here */ - mmcr->dmacontrol.extchanmapa = 0x3210; -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/digitallogic/msm586seg/romstage.c b/src/mainboard/digitallogic/msm586seg/romstage.c deleted file mode 100644 index 2cc0ab5864..0000000000 --- a/src/mainboard/digitallogic/msm586seg/romstage.c +++ /dev/null @@ -1,239 +0,0 @@ -#include -#include -#include -#include -#include -#include -#include "cpu/x86/bist.h" - -void setup_pars(void) -{ - volatile unsigned long *par; - /* as per the book: */ - /* PAR register setup */ - /* set up the PAR registers as they are on the MSM586SEG */ - par = (unsigned long *) 0xfffef088; - - /* NOTE: move this to mainboard.c ASAP */ - *par++ = 0x607c00a0; /*PAR0: PCI:Base 0xa0000; size 0x1f000:*/ - *par++ = 0x480400d8; /*PAR1: GP BUS MEM:CS2:Base 0xd8, size 0x4:*/ - *par++ = 0x340100ea; /*PAR2: GP BUS IO:CS5:Base 0xea, size 0x1:*/ - *par++ = 0x380701f0; /*PAR3: GP BUS IO:CS6:Base 0x1f0, size 0x7:*/ - *par++ = 0x3c0003f6; /*PAR4: GP BUS IO:CS7:Base 0x3f6, size 0x0:*/ - *par++ = 0x35ff0400; /*PAR5: GP BUS IO:CS5:Base 0x400, size 0xff:*/ - *par++ = 0x35ff0600; /*PAR6: GP BUS IO:CS5:Base 0x600, size 0xff:*/ - *par++ = 0x35ff0800; /*PAR7: GP BUS IO:CS5:Base 0x800, size 0xff:*/ - *par++ = 0x35ff0a00; /*PAR8: GP BUS IO:CS5:Base 0xa00, size 0xff:*/ - *par++ = 0x35ff0e00; /*PAR9: GP BUS IO:CS5:Base 0xe00, size 0xff:*/ - *par++ = 0x34fb0104; /*PAR10: GP BUS IO:CS5:Base 0x104, size 0xfb:*/ - *par++ = 0x35af0200; /*PAR11: GP BUS IO:CS5:Base 0x200, size 0xaf:*/ - *par++ = 0x341f03e0; /*PAR12: GP BUS IO:CS5:Base 0x3e0, size 0x1f:*/ - *par++ = 0xe41c00c0; /*PAR13: SDRAM:code:cache:nowrite:Base 0xc0000, size 0x7000:*/ - *par++ = 0x545c00c8; /*PAR14: GP BUS MEM:CS5:Base 0xc8, size 0x5c:*/ - *par++ = 0x8a020200; /*PAR15: BOOTCS:code:nocache:write:Base 0x2000000, size 0x80000:*/ -} - -#include "cpu/amd/sc520/raminit.c" - -struct mem_controller { - int i; -}; - -static int spd_read_byte(unsigned device, unsigned address) { } - -static inline void dumpmem(void){ - int i, j; - unsigned char *l; - unsigned char c; - - for(i = 0x4000; i < 0x5000; i += 16) { - print_err_hex32(i); print_err(":"); - for(j = 0; j < 16; j++) { - l = (unsigned char *)i + j; - c = *l; - print_err_hex8(c); - print_err(" "); - } - print_err("\n"); - } -} - -static inline void irqinit(void){ - volatile unsigned char *cp; -#if 0 -/* these values taken from the msm board itself. - * and they cause the board to not even come out of calibrating_delay_loop - * if you can believe it. Our problem right now is no IDE or serial interrupts - * So we'll try to put interrupts in, one at a time. IDE first. - */ - cp = (volatile unsigned char *) 0xfffefd00; - *cp = 0x11; - cp = (volatile unsigned char *) 0xfffefd02; - *cp = 0x02; - cp = (volatile unsigned char *) 0xfffefd03; - *cp = 0x00; - cp = (volatile unsigned char *) 0xfffefd04; - *cp = 0xf7; - cp = (volatile unsigned char *) 0xfffefd08; - *cp = 0xf7; - cp = (volatile unsigned char *) 0xfffefd0a; - *cp = 0x8b; - cp = (volatile unsigned char *) 0xfffefd10; - *cp = 0x18; - cp = (volatile unsigned char *) 0xfffefd14; - *cp = 0x09; - cp = (volatile unsigned char *) 0xfffefd18; - *cp = 0x88; - cp = (volatile unsigned char *) 0xfffefd1a; - *cp = 0x00; - cp = (volatile unsigned char *) 0xfffefd1b; - *cp = 0x00; - cp = (volatile unsigned char *) 0xfffefd1c; - *cp = 0x00; - cp = (volatile unsigned char *) 0xfffefd20; - *cp = 0x00; - cp = (volatile unsigned char *) 0xfffefd21; - *cp = 0x00; - cp = (volatile unsigned char *) 0xfffefd22; - *cp = 0x00; - cp = (volatile unsigned char *) 0xfffefd28; - *cp = 0x00; - cp = (volatile unsigned char *) 0xfffefd29; - *cp = 0x00; - cp = (volatile unsigned char *) 0xfffefd30; - *cp = 0x00; - cp = (volatile unsigned char *) 0xfffefd31; - *cp = 0x00; - cp = (volatile unsigned char *) 0xfffefd32; - *cp = 0x00; - cp = (volatile unsigned char *) 0xfffefd33; - *cp = 0x00; - cp = (volatile unsigned char *) 0xfffefd40; - *cp = 0x10; - cp = (volatile unsigned char *) 0xfffefd41; - *cp = 0x00; - cp = (volatile unsigned char *) 0xfffefd42; - *cp = 0x00; - cp = (volatile unsigned char *) 0xfffefd43; - *cp = 0x00; - cp = (volatile unsigned char *) 0xfffefd44; - *cp = 0x00; - cp = (volatile unsigned char *) 0xfffefd45; - *cp = 0x00; - cp = (volatile unsigned char *) 0xfffefd46; - *cp = 0x00; - cp = (volatile unsigned char *) 0xfffefd50; - *cp = 0x37; - cp = (volatile unsigned char *) 0xfffefd51; - *cp = 0x00; - cp = (volatile unsigned char *) 0xfffefd52; - *cp = 0x00; - cp = (volatile unsigned char *) 0xfffefd53; - *cp = 0x00; - cp = (volatile unsigned char *) 0xfffefd54; - *cp = 0x37; - cp = (volatile unsigned char *) 0xfffefd55; - *cp = 0x00; - cp = (volatile unsigned char *) 0xfffefd56; - *cp = 0x37; - cp = (volatile unsigned char *) 0xfffefd57; - *cp = 0x00; - cp = (volatile unsigned char *) 0xfffefd58; - *cp = 0xff; - cp = (volatile unsigned char *) 0xfffefd59; - *cp = 0xff; - cp = (volatile unsigned char *) 0xfffefd5a; - *cp = 0xff; -#endif -#if 0 - /* this fails too */ - /* IDE only ... */ - cp = (volatile unsigned char *) 0xfffefd56; - *cp = 0xe; -#endif -} - -#include -static void main(unsigned long bist) -{ - volatile int i; - for(i = 0; i < 100; i++) - ; - - setupsc520(); - irqinit(); - console_init(); - for(i = 0; i < 100; i++) - print_err("fill usart\n"); - // while(1) - print_err("HI THERE!\n"); - // sizemem(); - staticmem(); - -/* Void warranty when label is removed. */ -dummy_romcc_workaround_label: - do { } while (0); - - print_err("c60 is "); print_err_hex16(*(unsigned short *)0xfffefc60); - print_err("\n"); - - // while(1) - print_err("STATIC MEM DONE\n"); - post_code(0xee); - print_err("loop forever ...\n"); - -#if 0 - - /* clear memory 1meg */ - __asm__ volatile( - "1: \n\t" - "movl %0, %%fs:(%1)\n\t" - "addl $4,%1\n\t" - "subl $4,%2\n\t" - "jnz 1b\n\t" - : - : "a" (0), "D" (0), "c" (1024*1024) - ); - - -#endif - -#if 0 - dump_pci_devices(); -#endif -#if 0 - dump_pci_device(PCI_DEV(0, 0, 0)); -#endif - -#if 1 - { - volatile unsigned char *src = (unsigned char *) 0x2000000 + 0x60000; - volatile unsigned char *dst = (unsigned char *) 0x4000; - for(i = 0; i < 0x20000; i++) { - /* - print_err("Set dst "); print_err_hex32((unsigned long) dst); - print_err(" to "); print_err_hex32(*src); print_err("\n"); - */ - *dst = *src; - //print_err(" dst is now "); print_err_hex32(*dst); print_err("\n"); - dst++, src++; - post_code(i & 0xff); - } - } - dumpmem(); - post_code(0x00); - - print_err("loop forever\n"); - post_code(0xdd); - __asm__ volatile( - "movl %0, %%edi\n\t" - "jmp *%%edi\n\t" - : - : "a" (0x4000) - ); - - print_err("Oh dear, I'm afraid it didn't work...\n"); - - while(1); -#endif -} diff --git a/src/mainboard/technologic/Kconfig b/src/mainboard/technologic/Kconfig deleted file mode 100644 index 792dc5ed74..0000000000 --- a/src/mainboard/technologic/Kconfig +++ /dev/null @@ -1,17 +0,0 @@ -if VENDOR_TECHNOLOGIC - -choice - prompt "Mainboard model" - -config BOARD_TECHNOLOGIC_TS5300 - bool "TS-5300" - -endchoice - -source "src/mainboard/technologic/ts5300/Kconfig" - -config MAINBOARD_VENDOR - string - default "Technologic" - -endif # VENDOR_TECHNOLOGIC diff --git a/src/mainboard/technologic/ts5300/Kconfig b/src/mainboard/technologic/ts5300/Kconfig deleted file mode 100644 index 0006fd7903..0000000000 --- a/src/mainboard/technologic/ts5300/Kconfig +++ /dev/null @@ -1,23 +0,0 @@ -if BOARD_TECHNOLOGIC_TS5300 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_SC520 - select ROMCC - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select BOARD_ROMSIZE_KB_1024 - -config MAINBOARD_DIR - string - default technologic/ts5300 - -config MAINBOARD_PART_NUMBER - string - default "TS-5300" - -config IRQ_SLOT_COUNT - int - default 2 - -endif # BOARD_TECHNOLOGIC_TS5300 diff --git a/src/mainboard/technologic/ts5300/board_info.txt b/src/mainboard/technologic/ts5300/board_info.txt deleted file mode 100644 index ef8a731821..0000000000 --- a/src/mainboard/technologic/ts5300/board_info.txt +++ /dev/null @@ -1,2 +0,0 @@ -Category: half -Board URL: http://www.embeddedarm.com/epc/ts5300-spec-h.html diff --git a/src/mainboard/technologic/ts5300/cmos.layout b/src/mainboard/technologic/ts5300/cmos.layout deleted file mode 100644 index 9050c3db7a..0000000000 --- a/src/mainboard/technologic/ts5300/cmos.layout +++ /dev/null @@ -1,72 +0,0 @@ -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -#96 288 r 0 temporary_filler -0 384 r 0 reserved_memory -384 1 e 4 boot_option -385 1 e 4 last_boot -386 1 e 1 ECC_memory -388 4 r 0 reboot_bits -392 3 e 5 baud_rate -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -416 4 e 7 boot_first -420 4 e 7 boot_second -424 4 e 7 boot_third -428 4 h 0 boot_index -432 8 h 0 boot_countdown -1008 16 h 0 check_sum - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Network -7 1 HDD -7 2 Floppy -7 8 Fallback_Network -7 9 Fallback_HDD -7 10 Fallback_Floppy -#7 3 ROM - -checksums - -checksum 392 1007 1008 diff --git a/src/mainboard/technologic/ts5300/devicetree.cb b/src/mainboard/technologic/ts5300/devicetree.cb deleted file mode 100644 index 6c83e208ab..0000000000 --- a/src/mainboard/technologic/ts5300/devicetree.cb +++ /dev/null @@ -1,6 +0,0 @@ -chip cpu/amd/sc520 - device domain 0 on - device pci 0.0 on end - end - -end diff --git a/src/mainboard/technologic/ts5300/irq_tables.c b/src/mainboard/technologic/ts5300/irq_tables.c deleted file mode 100644 index 15dcddde12..0000000000 --- a/src/mainboard/technologic/ts5300/irq_tables.c +++ /dev/null @@ -1,31 +0,0 @@ -/* This file was generated by getpir.c, do not modify! - (but if you do, please run checkpir on it to verify) - * Contains the IRQ Routing Table dumped directly from your memory, which BIOS sets up - * - * Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM -*/ - -#include - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32+16*CONFIG_IRQ_SLOT_COUNT, /* there can be total CONFIG_IRQ_SLOT_COUNT devices on the bus */ - 0x00, /* Where the interrupt router lies (bus) */ - (0x00<<3)|0x0, /* Where the interrupt router lies (dev) */ - 0, /* IRQs devoted exclusively to PCI usage */ - 0x8086, /* Vendor */ - 0x122e, /* Device */ - 0, /* Miniport data */ - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0x50, /* u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ - { - /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - {0x00,(0x12<<3)|0x0, {{0x30, 0x8000}, {0x00, 0x0}, {0x00, 0x0}, {0x00, 0x00}}, 0x0, 0x0}, - {0x00,(0x14<<3)|0x0, {{0x30, 0x8000}, {0x31, 0x0}, {0x32, 0x0}, {0x33, 0x00}}, 0x0, 0x0}, - } -}; -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/technologic/ts5300/mainboard.c b/src/mainboard/technologic/ts5300/mainboard.c deleted file mode 100644 index 20b893ef71..0000000000 --- a/src/mainboard/technologic/ts5300/mainboard.c +++ /dev/null @@ -1,147 +0,0 @@ -#include -#include -#include -#include -#include -#include - - -#if 0 -static void irqdump(void) -{ - volatile unsigned char *irq; - void *mmcr; - - - int i; - int irqlist[] = {0xd00, 0xd02, 0xd03, 0xd04, 0xd08, 0xd0a, - 0xd14, 0xd18, 0xd1a, 0xd1b, 0xd1c, - 0xd20, 0xd21, 0xd22, 0xd28, 0xd29, - 0xd30, 0xd31, 0xd32, 0xd33, - 0xd40, 0xd41, 0xd42, 0xd43,0xd44, 0xd45, 0xd46, - 0xd50, 0xd51, 0xd52, 0xd53,0xd54, 0xd55, 0xd56, 0xd57,0xd58, 0xd59, 0xd5a, - -1}; - mmcr = (void *) 0xfffef000; - - printk(BIOS_ERR, "mmcr is %p\n", mmcr); - for(i = 0; irqlist[i] >= 0; i++) { - irq = mmcr + irqlist[i]; - printk(BIOS_ERR, "0x%x register @%p is 0x%x\n", irqlist[i], irq, *irq); - } - -} -#endif - -/* TODO: finish up mmcr struct in sc520.h, and; - - set ADDDECTL (now done in raminit.c in cpu/amd/sc520 -*/ -static void mainboard_enable(struct device *dev) -{ - volatile struct mmcr *mmcr = MMCRDEFAULT; - - /* currently, nothing in the device to use, so ignore it. */ - printk(BIOS_ERR, "Technologic Systems 5300 ENTER %s\n", __func__); - - /* from fuctory bios */ - /* NOTE: the following interrupt settings made interrupts work - * for hard drive, and serial, but not for ethernet - */ - - printk(BIOS_ERR, "Setting up PIC\n"); - /* just do what they say and nobody gets hurt. */ - mmcr->pic.pcicr = 0 ; - /* all ints to level */ - mmcr->pic.mpicmode = 0; - mmcr->pic.sl1picmode = 0; - mmcr->pic.sl2picmode = 0; - - mmcr->pic.intpinpol = 0x100; - - mmcr->pic.pit0map = 1; - mmcr->pic.uart1map = 0x0c; - mmcr->pic.uart2map = 0x0b; - mmcr->pic.rtcmap = 0x03; - mmcr->pic.ferrmap = 0x00; - mmcr->pic.intpinpol = 0x100; - - mmcr->pic.gp0imap = 0x00; - mmcr->pic.gp1imap = 0x02; - mmcr->pic.gp2imap = 0x07; - mmcr->pic.gp3imap = 0x05; - mmcr->pic.gp4imap = 0x06; - mmcr->pic.gp5imap = 0x0d; - mmcr->pic.gp6imap = 0x15; - mmcr->pic.gp7imap = 0x16; - mmcr->pic.gp8imap = 0x3; - mmcr->pic.gp9imap = 0x4; - mmcr->pic.gp10imap = 0x9; - - // irqdump(); - - printk(BIOS_ERR, "Setting up sysarb\n"); - mmcr->dbctl.dbctl = 0x01; - mmcr->sysarb.ctl = 0x00; - mmcr->sysarb.menb = 0x1f; - mmcr->sysarb.prictl = 0x40000f0f; - - /* this is bios setting, depends on sysarb above */ - mmcr->hostbridge.ctl = 0x0; - mmcr->hostbridge.tgtirqctl = 0x0; - mmcr->hostbridge.tgtirqsta = 0xf00; - mmcr->hostbridge.mstirqctl = 0x0; - mmcr->hostbridge.mstirqsta = 0x708; - - printk(BIOS_ERR, "Setting up pio\n"); - /* pio */ - mmcr->pio.pfs15_0 = 0xffff; - mmcr->pio.pfs31_16 = 0xffff; - mmcr->pio.cspfs = 0xfe; - mmcr->pio.clksel = 0x13; - mmcr->pio.dsctl = 0x200; - mmcr->pio.data15_0 = 0xde04; - mmcr->pio.data31_16 = 0xef9f; - - printk(BIOS_ERR, "Setting up sysmap\n"); - /* system memory map */ - mmcr->sysmap.adddecctl = 0x04; - mmcr->sysmap.wpvsta = 0x8006; - mmcr->sysmap.par[1] = 0x340f0070; - mmcr->sysmap.par[2] = 0x380701f0; - mmcr->sysmap.par[3] = 0x3c0103f6; - mmcr->sysmap.par[4] = 0x2c0f0300; - mmcr->sysmap.par[5] = 0x447c00a0; - mmcr->sysmap.par[6] = 0xe600000c; - mmcr->sysmap.par[7] = 0x300046e8; - mmcr->sysmap.par[8] = 0x500400d0; - mmcr->sysmap.par[9] = 0x281f0140; - mmcr->sysmap.par[13] = 0x8a07c940; - mmcr->sysmap.par[15] = 0xee00400e; - - printk(BIOS_ERR, "Setting up gpctl\n"); - mmcr->gpctl.gpcsrt = 0x01; - mmcr->gpctl.gpcspw = 0x09; - mmcr->gpctl.gpcsoff = 0x01; - mmcr->gpctl.gprdw = 0x07; - mmcr->gpctl.gprdoff = 0x02; - mmcr->gpctl.gpwrw = 0x07; - mmcr->gpctl.gpwroff = 0x02; - - //mmcr->reset.sysinfo = 0xdf; - //mmcr->reset.rescfg = 0x5; - /* their IRQ table is wrong. Just hardwire it */ - //{ - // char pciints[4] = {15, 15, 15, 15}; - // pci_assign_irqs(0, 12, pciints); - //} - /* the assigned failed but we just noticed -- there is no - * dma mapping, and selftest on e100 requires that dma work - */ - mmcr->dmacontrol.extchanmapa = 0xf210; - mmcr->dmacontrol.extchanmapb = 0xffff; - - printk(BIOS_ERR, "TS5300 EXIT %s\n", __func__); -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/technologic/ts5300/romstage.c b/src/mainboard/technologic/ts5300/romstage.c deleted file mode 100644 index 9cafc64f37..0000000000 --- a/src/mainboard/technologic/ts5300/romstage.c +++ /dev/null @@ -1,168 +0,0 @@ -/* - * TS5300 specific initialization code. - * written by Stefan Reinauer - * (c) 2006 coresystems GmbH - */ - -#include -#include -#include -#include -#include -#include -#include "cpu/x86/bist.h" - -#define TS5300_LED_OFF outb((inb(0x77)&0xfe), 0x77) -#define TS5300_LED_ON outb((inb(0x77)|1), 0x77) - -#define TS9500_LED_OFF outb((inb(0x19a)&0xfe), 0x19a) -#define TS9500_LED_ON outb((inb(0x19a)|1), 0x19a) - -/* PAR register setup */ -void setup_pars(void) -{ - volatile unsigned long *par; - par = (unsigned long *) 0xfffef088; - - /* NOTE: Ron says, move this to mainboard.c */ - *par++ = 0x00000000; - *par++ = 0x340f0070; - *par++ = 0x380701f0; - *par++ = 0x3c0103f6; - *par++ = 0x2c0f0300; - *par++ = 0x447c00a0; - *par++ = 0xe600000c; - *par++ = 0x300046e8; - *par++ = 0x500400d0; - *par++ = 0x281f0140; - *par++ = 0x00000000; - *par++ = 0x00000000; - *par++ = 0x00000000; - *par++ = 0x8a07c940; /* Flash setup */ - *par++ = 0x00000000; - *par++ = 0xee00400e; -} - -#include "cpu/amd/sc520/raminit.c" - -static void identify_ts9500(void) -{ - unsigned i, val; - - TS9500_LED_ON; - - print_err("TS-9500 add-on found:\n"); - val=inb(0x19b); - for (i=0; i<8; i++) { - print_err(" DIP"); - print_err_char(i+0x31); - print_err(": "); - if((val&(1< -static void main(unsigned long bist) -{ - volatile int i; - unsigned val; - - TS5300_LED_ON; - - // Let the hardware settle a bit. - for(i = 0; i < 100; i++) - ; - - setupsc520(); - console_init(); - - - print_err("Technologic Systems TS5300 - http://www.embeddedx86.com/\n"); - staticmem(); - -/* Void warranty when label is removed. */ -dummy_romcc_workaround_label: - do { } while (0); - - print_err("Memory initialized: 32MB\n"); - -#if 1 - identify_system(); -#endif - - TS5300_LED_OFF; -}