soc/intel/cannonlake: Use EBDA area to store cbmem_top address

This patch uses BIOS EBDA area to store relevent details
like cbmem top during romstage after MRC init is done.
Also provide provision to use the same EBDA data across
various stages without reexecuting memory map algorithm.

BRANCH=none
BUG=b:63974384
TEST=Ensures HW based memmap algorithm is executing once in romstage
and store required data into EBDA for other stage to avoid redundant
calculation and get cbmem_top start from EBDA area.

Change-Id: I763ad8181396ea8d8c0d5cf088264791ba62dceb
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/21985
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This commit is contained in:
Subrata Banik 2017-10-12 17:59:02 +05:30 committed by Aaron Durbin
parent d2cadc39f3
commit 47569cf3a9
5 changed files with 77 additions and 50 deletions

View File

@ -46,6 +46,7 @@ config CPU_SPECIFIC_OPTIONS
select SOC_INTEL_COMMON_BLOCK_CPU
select SOC_INTEL_COMMON_BLOCK_CPU_MPINIT
select SOC_INTEL_COMMON_BLOCK_CSE
select SOC_INTEL_COMMON_BLOCK_EBDA
select SOC_INTEL_COMMON_BLOCK_FAST_SPI
select SOC_INTEL_COMMON_BLOCK_GPIO
select SOC_INTEL_COMMON_BLOCK_GSPI

View File

@ -196,6 +196,4 @@ void pch_early_init(void)
enable_rtc_upper_bank();
heci_init(HECI1_BASE_ADDRESS);
clear_cbmem_top();
}

View File

@ -27,6 +27,4 @@ void pch_early_init(void);
void pch_early_iorange_init(void);
void report_platform_info(void);
void clear_cbmem_top(void);
#endif

View File

@ -0,0 +1,24 @@
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2017 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef SOC_EBDA_H
#define SOC_EBDA_H
struct ebda_config {
uint32_t signature; /* 0x00 - EBDA signature */
uint32_t tolum_base; /* 0x04 - coreboot memory start */
};
#endif

View File

@ -13,6 +13,8 @@
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <arch/ebda.h>
#include <arch/io.h>
#include <cbmem.h>
#include <chip.h>
@ -20,8 +22,8 @@
#include <device/device.h>
#include <device/pci.h>
#include <fsp/util.h>
#include <intelblocks/ebda.h>
#include <intelblocks/systemagent.h>
#include <soc/bootblock.h>
#include <soc/pci_devs.h>
#include <soc/smm.h>
#include <soc/systemagent.h>
@ -81,20 +83,6 @@ int smm_subregion(int sub, void **start, size_t *size)
return 0;
}
static void *top_of_ram_register(void)
{
int num;
int offset;
num = (read32((uintptr_t *)HPET_BASE_ADDRESS) >> 8) & 0x1f;
offset = 0x100 + (0x20 * num) + 0x08;
return (void *)(uintptr_t)(HPET_BASE_ADDRESS + offset);
}
void clear_cbmem_top(void)
{
write32(top_of_ram_register(), 0);
}
static bool is_ptt_enable(void)
{
if ((read32((void *)PTT_TXT_BASE_ADDRESS) & PTT_PRESENT) ==
@ -268,18 +256,20 @@ static uintptr_t calculate_dram_base(size_t *reserved_mem_size)
return dram_base;
}
void cbmem_top_init(void)
/* Fill up memory layout information */
void fill_soc_memmap_ebda(struct ebda_config *cfg)
{
uintptr_t top;
size_t chipset_mem_size;
top = calculate_dram_base(&chipset_mem_size);
write32(top_of_ram_register(), top);
cfg->tolum_base = calculate_dram_base(&chipset_mem_size);
}
void *cbmem_top(void)
void cbmem_top_init(void)
{
/* Fill up EBDA area */
fill_ebda_area();
}
/*
* +-------------------------+ Top of RAM (aligned)
* | System Management Mode |
@ -307,5 +297,21 @@ void *cbmem_top(void)
* | |
* +-------------------------+
*/
return (void *)(uintptr_t)read32(top_of_ram_register());
void *cbmem_top(void)
{
struct ebda_config ebda_cfg;
struct ebda_config *cfg = &ebda_cfg;
/*
* Check if Tseg has been initialized, we will use this as a flag
* to check if the MRC is done, and only then continue to read the
* PRMMR_BASE MSR. The system hangs if PRMRR_BASE MSR is read before
* PRMRR_MASK MSR lock bit is set.
*/
if (sa_get_tseg_base() == 0)
return NULL;
retrieve_ebda_object(cfg);
return (void *)(uintptr_t)cfg->tolum_base;
}