diff --git a/src/Kconfig b/src/Kconfig index b9539d1a1e..76e77f8401 100644 --- a/src/Kconfig +++ b/src/Kconfig @@ -159,6 +159,15 @@ config MMCONF_SUPPORT source src/console/Kconfig +# This should default to N and be set by SuperI/O drivers that have an UART +config HAVE_UART_IO_MAPPED + bool + default y + +config HAVE_UART_MEMORY_MAPPED + bool + default n + config HAVE_ACPI_RESUME bool default n diff --git a/src/arch/x86/boot/coreboot_table.c b/src/arch/x86/boot/coreboot_table.c index 634cefd439..db3a8a9b5f 100644 --- a/src/arch/x86/boot/coreboot_table.c +++ b/src/arch/x86/boot/coreboot_table.c @@ -135,6 +135,9 @@ static void lb_console(struct lb_header *header) #if CONFIG_CONSOLE_SERIAL8250 add_console(header, LB_TAG_CONSOLE_SERIAL8250); #endif +#if CONFIG_CONSOLE_SERIAL8250MEM + add_console(header, LB_TAG_CONSOLE_SERIAL8250MEM); +#endif #if CONFIG_CONSOLE_LOGBUF add_console(header, LB_TAG_CONSOLE_LOGBUF); #endif diff --git a/src/arch/x86/lib/romstage_console.c b/src/arch/x86/lib/romstage_console.c index e8a926356e..a5f2e2b074 100644 --- a/src/arch/x86/lib/romstage_console.c +++ b/src/arch/x86/lib/romstage_console.c @@ -19,7 +19,7 @@ #include #include -#if CONFIG_CONSOLE_SERIAL8250 +#if CONFIG_CONSOLE_SERIAL8250 || CONFIG_CONSOLE_SERIAL8250MEM #include #endif #if CONFIG_USBDEBUG @@ -34,6 +34,9 @@ static void console_tx_byte(unsigned char byte) if (byte == '\n') console_tx_byte('\r'); +#if CONFIG_CONSOLE_SERIAL8250MEM + uart8250_mem_tx_byte(CONFIG_OXFORD_OXPCIE_BASE_ADDRESS + 0x1000, byte); +#endif #if CONFIG_CONSOLE_SERIAL8250 uart8250_tx_byte(CONFIG_TTYS0_BASE, byte); #endif diff --git a/src/console/Kconfig b/src/console/Kconfig index 972276b675..02244d7ded 100644 --- a/src/console/Kconfig +++ b/src/console/Kconfig @@ -2,9 +2,16 @@ menu "Console" # TODO: Rename to SERIAL_CONSOLE once Kconfig transition is complete. config CONSOLE_SERIAL8250 bool "Serial port console output" + depends on HAVE_UART_IO_MAPPED default y help - Send coreboot debug output to a serial port console. + Send coreboot debug output to an I/O mapped serial port console. + +config CONSOLE_SERIAL8250MEM + bool "Serial port console output (memory mapped)" + depends on HAVE_UART_MEMORY_MAPPED + help + Send coreboot debug output to a memory mapped serial port console. choice prompt "Serial port" @@ -43,7 +50,7 @@ config TTYS0_BASE choice prompt "Baud rate" default CONSOLE_SERIAL_115200 - depends on CONSOLE_SERIAL8250 + depends on CONSOLE_SERIAL8250 || CONSOLE_SERIAL8250MEM config CONSOLE_SERIAL_115200 bool "115200" @@ -82,7 +89,7 @@ config TTYS0_BAUD config TTYS0_LCS int default 3 - depends on CONSOLE_SERIAL8250 + depends on CONSOLE_SERIAL8250 || CONSOLE_SERIAL8250MEM # Use "select HAVE_USBDEBUG" on southbridges which have Debug Port code. config HAVE_USBDEBUG diff --git a/src/console/Makefile.inc b/src/console/Makefile.inc index 2b6437898c..4a30918c75 100644 --- a/src/console/Makefile.inc +++ b/src/console/Makefile.inc @@ -14,6 +14,7 @@ romstage-y += post.c romstage-y += die.c driver-$(CONFIG_CONSOLE_SERIAL8250) += uart8250_console.c +driver-$(CONFIG_CONSOLE_SERIAL8250MEM) += uart8250mem_console.c driver-$(CONFIG_USBDEBUG) += usbdebug_console.c driver-$(CONFIG_CONSOLE_LOGBUF) += logbuf_console.c driver-$(CONFIG_CONSOLE_NE2K) += ne2k_console.c diff --git a/src/console/console.c b/src/console/console.c index 9ec0e259a9..a73616e948 100644 --- a/src/console/console.c +++ b/src/console/console.c @@ -22,7 +22,7 @@ #include #include -#if CONFIG_CONSOLE_SERIAL8250 +#if CONFIG_CONSOLE_SERIAL8250 || CONFIG_CONSOLE_SERIAL8250MEM #include #endif @@ -106,6 +106,9 @@ void console_init(void) #if CONFIG_CONSOLE_SERIAL8250 uart_init(); #endif +#if CONFIG_DRIVERS_OXFORD_OXPCIE && CONFIG_CONSOLE_SERIAL8250MEM + oxford_init(); +#endif #if CONFIG_CONSOLE_NE2K ne2k_init(CONFIG_CONSOLE_NE2K_IO_PORT); #endif diff --git a/src/console/uart8250mem_console.c b/src/console/uart8250mem_console.c new file mode 100644 index 0000000000..a6968ddc4b --- /dev/null +++ b/src/console/uart8250mem_console.c @@ -0,0 +1,60 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2003 Eric Biederman + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include + +static u32 uart_bar = 0; + +static void uartmem_init(void) +{ + uart_bar = uart_mem_init(); +} + +static void uartmem_tx_byte(unsigned char data) +{ + if (!uart_bar) + return; + + uart8250_mem_tx_byte(uart_bar, data); +} + +static unsigned char uartmem_rx_byte(void) +{ + if (!uart_bar) + return 0; + + return uart8250_mem_rx_byte(uart_bar); +} + +static int uartmem_tst_byte(void) +{ + if (!uart_bar) + return 0; + + return uart8250_mem_can_rx_byte(uart_bar); +} + +static const struct console_driver uart8250mem_console __console = { + .init = uartmem_init, + .tx_byte = uartmem_tx_byte, + .rx_byte = uartmem_rx_byte, + .tst_byte = uartmem_tst_byte, +}; diff --git a/src/cpu/x86/smm/smiutil.c b/src/cpu/x86/smm/smiutil.c index cf951f4518..d9057d813a 100644 --- a/src/cpu/x86/smm/smiutil.c +++ b/src/cpu/x86/smm/smiutil.c @@ -26,7 +26,7 @@ #include #include -#if CONFIG_CONSOLE_SERIAL8250 +#if CONFIG_CONSOLE_SERIAL8250 || CONFIG_CONSOLE_SERIAL8250MEM #include #endif #if CONFIG_USBDEBUG @@ -36,6 +36,10 @@ #include #endif +#if CONFIG_CONSOLE_SERIAL8250MEM +static u32 serial8250mem_base_address = 0; +#endif + void console_tx_flush(void) { // the tx_byte functions take care of the flush. @@ -47,6 +51,10 @@ void console_tx_byte(unsigned char byte) if (byte == '\n') console_tx_byte('\r'); +#if CONFIG_CONSOLE_SERIAL8250MEM + if (serial8250mem_base_address) + uart8250_mem_tx_byte(serial8250mem_base_address, byte); +#endif #if CONFIG_CONSOLE_SERIAL8250 uart8250_tx_byte(CONFIG_TTYS0_BASE, byte); #endif @@ -65,6 +73,9 @@ void console_init(void) #if CONFIG_CONSOLE_SERIAL8250 uart_init(); #endif +#if CONFIG_CONSOLE_SERIAL8250MEM + serial8250mem_base_address = uart_mem_init(); +#endif #else console_loglevel = 1; #endif diff --git a/src/drivers/Kconfig b/src/drivers/Kconfig index f0bb966cf7..98f2079eea 100644 --- a/src/drivers/Kconfig +++ b/src/drivers/Kconfig @@ -22,6 +22,7 @@ source src/drivers/dec/Kconfig source src/drivers/emulation/Kconfig source src/drivers/generic/Kconfig source src/drivers/i2c/Kconfig +source src/drivers/oxford/Kconfig source src/drivers/sil/Kconfig source src/drivers/trident/Kconfig diff --git a/src/drivers/Makefile.inc b/src/drivers/Makefile.inc index 232f122c85..ae7a0989df 100644 --- a/src/drivers/Makefile.inc +++ b/src/drivers/Makefile.inc @@ -22,6 +22,7 @@ subdirs-y += dec subdirs-y += emulation subdirs-y += generic subdirs-y += i2c +subdirs-y += oxford subdirs-y += sil subdirs-y += trident diff --git a/src/drivers/oxford/Kconfig b/src/drivers/oxford/Kconfig new file mode 100644 index 0000000000..cd7c27ced0 --- /dev/null +++ b/src/drivers/oxford/Kconfig @@ -0,0 +1 @@ +source src/drivers/oxford/oxpcie/Kconfig diff --git a/src/drivers/oxford/Makefile.inc b/src/drivers/oxford/Makefile.inc new file mode 100644 index 0000000000..732face171 --- /dev/null +++ b/src/drivers/oxford/Makefile.inc @@ -0,0 +1 @@ +subdirs-$(CONFIG_DRIVERS_OXFORD_OXPCIE) += oxpcie diff --git a/src/drivers/oxford/oxpcie/Kconfig b/src/drivers/oxford/oxpcie/Kconfig new file mode 100644 index 0000000000..899a1533b7 --- /dev/null +++ b/src/drivers/oxford/oxpcie/Kconfig @@ -0,0 +1,68 @@ +config DRIVERS_OXFORD_OXPCIE + bool "Oxford OXPCIe952" + default n + select HAVE_UART_MEMORY_MAPPED + help + Support for Oxford OXPCIe952 serial port PCIe cards. + Currently only devices with the vendor ID 0x1415 and device ID + 0xc158 will work. + NOTE: Right now you have to set the base address of your OXPCIe952 + card to exactly the value that the device allocator would set them + later on, or serial console functionality will stop as soon as the + resource allocator assigns a new base address to the device. + +config OXFORD_OXPCIE_BRIDGE_BUS + hex "OXPCIe's PCIe bridge bus number" + default 0x0 + depends on DRIVERS_OXFORD_OXPCIE + help + While coreboot is executing code from ROM, the coreboot resource + allocator has not been running yet. Hence PCI devices living behind + a bridge are not yet visible to the system. In order to use an + OXPCIe952 based PCIe card, coreboot has to set up the PCIe bridge + that controls the OXPCIe952 controller first. + +config OXFORD_OXPCIE_BRIDGE_DEVICE + hex "OXPCIe's PCIe bridge device number" + default 0x1c + depends on DRIVERS_OXFORD_OXPCIE + help + While coreboot is executing code from ROM, the coreboot resource + allocator has not been running yet. Hence PCI devices living behind + a bridge are not yet visible to the system. In order to use an + OXPCIe952 based PCIe card, coreboot has to set up the PCIe bridge + that controls the OXPCIe952 controller first. + +config OXFORD_OXPCIE_BRIDGE_FUNCTION + hex "OXPCIe's PCIe bridge function number" + default 0x2 + depends on DRIVERS_OXFORD_OXPCIE + help + While coreboot is executing code from ROM, the coreboot resource + allocator has not been running yet. Hence PCI devices living behind + a bridge are not yet visible to the system. In order to use an + OXPCIe952 based PCIe card, coreboot has to set up the PCIe bridge + that controls the OXPCIe952 controller first. + +config OXFORD_OXPCIE_BRIDGE_SUBORDINATE + hex "OXPCIe's PCIe bridge subordinate bus" + default 0x3 + depends on DRIVERS_OXFORD_OXPCIE + help + While coreboot is executing code from ROM, the coreboot resource + allocator has not been running yet. Hence PCI devices living behind + a bridge are not yet visible to the system. In order to use an + OXPCIe952 based PCIe card, coreboot has to set up the PCIe bridge + that controls the OXPCIe952 controller first. + +config OXFORD_OXPCIE_BASE_ADDRESS + hex "Base address for rom stage console" + default 0xe0400000 + depends on DRIVERS_OXFORD_OXPCIE + help + While coreboot is executing code from ROM, the coreboot resource + allocator has not been running yet. Hence PCI devices living behind + a bridge are not yet visible to the system. In order to use an + OXPCIe952 based PCIe card, coreboot has to set up a temporary address + for the OXPCIe952 controller. + diff --git a/src/drivers/oxford/oxpcie/Makefile.inc b/src/drivers/oxford/oxpcie/Makefile.inc new file mode 100644 index 0000000000..7d3a26f509 --- /dev/null +++ b/src/drivers/oxford/oxpcie/Makefile.inc @@ -0,0 +1,3 @@ +driver-$(CONFIG_DRIVERS_OXFORD_OXPCIE) += oxpcie.c + +romstage-$(CONFIG_DRIVERS_OXFORD_OXPCIE) += oxpcie_early.c diff --git a/src/drivers/oxford/oxpcie/oxpcie.c b/src/drivers/oxford/oxpcie/oxpcie.c new file mode 100644 index 0000000000..94c5b64e66 --- /dev/null +++ b/src/drivers/oxford/oxpcie/oxpcie.c @@ -0,0 +1,56 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Google Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include +#include +#include +#include + +static void oxford_oxpcie_enable(device_t dev) +{ + printk(BIOS_DEBUG, "Initializing Oxford OXPCIe952\n"); + + struct resource *res = find_resource(dev, 0x10); + if (!res) { + printk(BIOS_WARNING, "OXPCIe952: No UART resource found.\n"); + return; + } + + printk(BIOS_DEBUG, "OXPCIe952: Class=%x Revision ID=%x\n", + (read32(res->base) >> 8), (read32(res->base) & 0xff)); + printk(BIOS_DEBUG, "OXPCIe952: %d UARTs detected.\n", + (read32(res->base + 4) & 3)); +} + +static struct device_operations oxford_oxpcie_ops = { + .read_resources = pci_dev_read_resources, + .set_resources = pci_dev_set_resources, + .enable_resources = pci_dev_enable_resources, + .init = oxford_oxpcie_enable, + .scan_bus = 0, +}; + +static const struct pci_driver oxford_oxpcie_driver __pci_driver = { + .ops = &oxford_oxpcie_ops, + .vendor = 0x1415, + .device = 0xc158, +}; diff --git a/src/drivers/oxford/oxpcie/oxpcie_early.c b/src/drivers/oxford/oxpcie/oxpcie_early.c new file mode 100644 index 0000000000..235c52c654 --- /dev/null +++ b/src/drivers/oxford/oxpcie/oxpcie_early.c @@ -0,0 +1,89 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Google Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include +#include + +#define PCIE_BRIDGE \ + PCI_DEV(CONFIG_OXFORD_OXPCIE_BRIDGE_BUS, \ + CONFIG_OXFORD_OXPCIE_BRIDGE_DEVICE, \ + CONFIG_OXFORD_OXPCIE_BRIDGE_FUNCTION) + +#define OXPCIE_DEVICE \ + PCI_DEV(CONFIG_OXFORD_OXPCIE_BRIDGE_SUBORDINATE, 0, 0) + +void oxford_init(void) +{ + u16 reg16; + + /* First we reset the secondary bus */ + reg16 = pci_read_config16(PCIE_BRIDGE, PCI_BRIDGE_CONTROL); + reg16 |= (1 << 6); /* SRESET */ + pci_write_config16(PCIE_BRIDGE, PCI_BRIDGE_CONTROL, reg16); + + /* Assume we don't have to wait here forever */ + + /* Read back and clear reset bit. */ + reg16 = pci_read_config16(PCIE_BRIDGE, PCI_BRIDGE_CONTROL); + reg16 &= ~(1 << 6); /* SRESET */ + pci_write_config16(PCIE_BRIDGE, PCI_BRIDGE_CONTROL, reg16); + + /* Set up subordinate bus number */ + pci_write_config8(PCIE_BRIDGE, PCI_SECONDARY_BUS, 0x00); + pci_write_config8(PCIE_BRIDGE, PCI_SUBORDINATE_BUS, 0x00); + pci_write_config8(PCIE_BRIDGE, PCI_SECONDARY_BUS, + CONFIG_OXFORD_OXPCIE_BRIDGE_SUBORDINATE); + pci_write_config8(PCIE_BRIDGE, PCI_SUBORDINATE_BUS, + CONFIG_OXFORD_OXPCIE_BRIDGE_SUBORDINATE); + + /* Memory window for the OXPCIe952 card */ + // XXX is the calculation of base and limit corect? + pci_write_config32(PCIE_BRIDGE, PCI_MEMORY_BASE, + ((CONFIG_OXFORD_OXPCIE_BASE_ADDRESS & 0xffff0000) | + ((CONFIG_OXFORD_OXPCIE_BASE_ADDRESS >> 16) & 0xff00))); + + /* Enable memory access through bridge */ + reg16 = pci_read_config16(PCIE_BRIDGE, PCI_COMMAND); + reg16 |= PCI_COMMAND_MEMORY; + pci_write_config16(PCIE_BRIDGE, PCI_COMMAND, reg16); + + // FIXME Add a timeout or this will hang forever if + // no device is in the slot. + u32 id = 0; + while ((id == 0) || (id == 0xffffffff)) + id = pci_read_config32(OXPCIE_DEVICE, PCI_VENDOR_ID); + + /* Setup base address on device */ + pci_write_config32(OXPCIE_DEVICE, PCI_BASE_ADDRESS_0, + CONFIG_OXFORD_OXPCIE_BASE_ADDRESS); + + /* Enable memory on device */ + reg16 = pci_read_config16(OXPCIE_DEVICE, PCI_COMMAND); + reg16 |= PCI_COMMAND_MEMORY; + pci_write_config16(OXPCIE_DEVICE, PCI_COMMAND, reg16); + + /* Now the UART initialization */ + u32 uart0_base = CONFIG_OXFORD_OXPCIE_BASE_ADDRESS + 0x1000; + + uart8250_mem_init(uart0_base, (4000000 / CONFIG_TTYS0_BAUD)); +} + diff --git a/src/include/boot/coreboot_tables.h b/src/include/boot/coreboot_tables.h index c783dc8cdb..983b03f602 100644 --- a/src/include/boot/coreboot_tables.h +++ b/src/include/boot/coreboot_tables.h @@ -163,6 +163,7 @@ struct lb_console { #define LB_TAG_CONSOLE_LOGBUF 3 #define LB_TAG_CONSOLE_SROM 4 // OBSOLETE #define LB_TAG_CONSOLE_EHCI 5 +#define LB_TAG_CONSOLE_SERIAL8250MEM 6 #define LB_TAG_FORWARD 0x0011 struct lb_forward { diff --git a/src/include/uart8250.h b/src/include/uart8250.h index 217558a8d5..bbf2d8c8a9 100644 --- a/src/include/uart8250.h +++ b/src/include/uart8250.h @@ -124,6 +124,7 @@ #define UART_MSR_DCTS 0x01 /* Delta CTS */ #define UART_SCR 0x07 +#define UART_SPR 0x07 #ifndef __ROMCC__ @@ -136,6 +137,17 @@ void uart8250_tx_byte(unsigned base_port, unsigned char data); */ void uart8250_init(unsigned base_port, unsigned divisor); void uart_init(void); + +/* and the same for memory mapped uarts */ +unsigned char uart8250_mem_rx_byte(unsigned base_port); +int uart8250_mem_can_rx_byte(unsigned base_port); +void uart8250_mem_tx_byte(unsigned base_port, unsigned char data); +void uart8250_mem_init(unsigned base_port, unsigned divisor); +u32 uart_mem_init(void); + +/* and special init for OXPCIe based cards */ +void oxford_init(void); + #endif #endif /* UART8250_H */ diff --git a/src/lib/Makefile.inc b/src/lib/Makefile.inc index 2d7936bbda..38171615ac 100644 --- a/src/lib/Makefile.inc +++ b/src/lib/Makefile.inc @@ -9,6 +9,7 @@ romstage-y += lzma.c romstage-$(CONFIG_CACHE_AS_RAM) += ramtest.c romstage-$(CONFIG_HAVE_ACPI_RESUME) += cbmem.c romstage-$(CONFIG_CONSOLE_SERIAL8250) += uart8250.c +romstage-$(CONFIG_CONSOLE_SERIAL8250MEM) += uart8250mem.c romstage-$(CONFIG_CONSOLE_NE2K) += ne2k.c romstage-$(CONFIG_CONSOLE_NE2K) += compute_ip_checksum.c romstage-$(CONFIG_USBDEBUG) += usbdebug.c @@ -29,6 +30,7 @@ ramstage-y += gcc.c ramstage-y += clog2.c ramstage-y += cbmem.c ramstage-$(CONFIG_CONSOLE_SERIAL8250) += uart8250.c +ramstage-$(CONFIG_CONSOLE_SERIAL8250MEM) += uart8250mem.c ramstage-$(CONFIG_USBDEBUG) += usbdebug.c ramstage-$(CONFIG_BOOTSPLASH) += jpeg.c @@ -36,5 +38,6 @@ driver-$(CONFIG_CONSOLE_NE2K) += ne2k.c smm-y += memcpy.c smm-$(CONFIG_CONSOLE_SERIAL8250) += uart8250.c +smm-$(CONFIG_CONSOLE_SERIAL8250MEM) += uart8250mem.c $(obj)/lib/version.ramstage.o : $(obj)/build.h diff --git a/src/lib/uart8250mem.c b/src/lib/uart8250mem.c new file mode 100644 index 0000000000..918308ecdf --- /dev/null +++ b/src/lib/uart8250mem.c @@ -0,0 +1,139 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2003 Eric Biederman + * Copyright (C) 2006-2010 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#if CONFIG_USE_OPTION_TABLE +#include "option_table.h" +#endif +#if !defined(__SMM__) && !defined(__PRE_RAM__) +#include +#endif + +/* Should support 8250, 16450, 16550, 16550A type UARTs */ + +static inline int uart8250_mem_can_tx_byte(unsigned base_port) +{ + return read8(base_port + UART_LSR) & UART_MSR_DSR; +} + +static inline void uart8250_mem_wait_to_tx_byte(unsigned base_port) +{ + while(!uart8250_mem_can_tx_byte(base_port)) + ; +} + +static inline void uart8250_mem_wait_until_sent(unsigned base_port) +{ + while(!(read8(base_port + UART_LSR) & UART_LSR_TEMT)) + ; +} + +void uart8250_mem_tx_byte(unsigned base_port, unsigned char data) +{ + uart8250_mem_wait_to_tx_byte(base_port); + write8(base_port + UART_TBR, data); + /* Make certain the data clears the FIFOs */ + uart8250_mem_wait_until_sent(base_port); +} + +int uart8250_mem_can_rx_byte(unsigned base_port) +{ + return read8(base_port + UART_LSR) & UART_LSR_DR; +} + +unsigned char uart8250_mem_rx_byte(unsigned base_port) +{ + while(!uart8250_mem_can_rx_byte(base_port)) + ; + return read8(base_port + UART_RBR); +} + +void uart8250_mem_init(unsigned base_port, unsigned divisor) +{ + /* Disable interrupts */ + write8(base_port + UART_IER, 0x0); + /* Enable FIFOs */ + write8(base_port + UART_FCR, UART_FCR_FIFO_EN); + + /* Assert DTR and RTS so the other end is happy */ + write8(base_port + UART_MCR, UART_MCR_DTR | UART_MCR_RTS); + + /* DLAB on */ + write8(base_port + UART_LCR, UART_LCR_DLAB | CONFIG_TTYS0_LCS); + + /* Set Baud Rate Divisor. 12 ==> 115200 Baud */ + write8(base_port + UART_DLL, divisor & 0xFF); + write8(base_port + UART_DLM, (divisor >> 8) & 0xFF); + + /* Set to 3 for 8N1 */ + write8(base_port + UART_LCR, CONFIG_TTYS0_LCS); +} + +u32 uart_mem_init(void) +{ + unsigned uart_baud = CONFIG_TTYS0_BAUD; + u32 uart_bar = 0; + unsigned div; + + /* find out the correct baud rate */ +#if !defined(__SMM__) && CONFIG_USE_OPTION_TABLE + static const unsigned baud[8] = { 115200, 57600, 38400, 19200, 9600, 4800, 2400, 1200 }; + unsigned b_index = 0; +#if defined(__PRE_RAM__) + b_index = read_option(CMOS_VSTART_baud_rate, CMOS_VLEN_baud_rate, 0); + b_index &= 7; + uart_baud = baud[b_index]; +#else + if (get_option(&b_index, "baud_rate") == 0) { + uart_baud = baud[b_index]; + } +#endif +#endif + + /* Now find the UART base address and calculate the divisor */ +#if CONFIG_DRIVERS_OXFORD_OXPCIE + +#if defined(MORE_TESTING) && !defined(__SMM__) && !defined(__PRE_RAM__) + device_t dev = dev_find_device(0x1415, 0xc158, NULL); + + if (dev) { + struct resource *res = find_resource(dev, 0x10); + + if (res) { + uart_bar = res->base + 0x1000; // for 1st UART + // uart_bar = res->base + 0x2000; // for 2nd UART + } + } + + if (!uart_bar) +#endif + uart_bar = CONFIG_OXFORD_OXPCIE_BASE_ADDRESS + 0x1000; // 1st UART + // uart_bar = CONFIG_OXFORD_OXPCIE_BASE_ADDRESS + 0x2000; // 2nd UART + + div = 4000000 / uart_baud; +#endif + + if (uart_bar) + uart8250_mem_init(uart_bar, div); + + return uart_bar; +}