mb/amd/majolica: Add FCH IRQ routing

I left most everything as NC since we don't expose the values to the
OS yet.

Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I7c3195ef27091f1bc61892c475ffe09137b63083
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50511
Reviewed-by: Mathew King <mathewk@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This commit is contained in:
Raul E Rangel 2021-02-10 16:49:04 -07:00 committed by Martin Roth
parent a6529e789f
commit 48c99db6d6
1 changed files with 104 additions and 0 deletions

View File

@ -0,0 +1,104 @@
/* SPDX-License-Identifier: GPL-2.0-only */
#include <amdblocks/amd_pci_util.h>
#include <commonlib/helpers.h>
#include <console/console.h>
#include <device/device.h>
#include <soc/acpi.h>
#include <string.h>
#include <types.h>
/*
* These arrays set up the FCH PCI_INTR registers 0xC00/0xC01.
* This table is responsible for physically routing the PIC and
* IOAPIC IRQs to the different PCI devices on the system. It
* is read and written via registers 0xC00/0xC01 as an
* Index/Data pair. These values are chipset and mainboard
* dependent and should be updated accordingly.
*/
static uint8_t fch_pic_routing[0x80];
static uint8_t fch_apic_routing[0x80];
_Static_assert(sizeof(fch_pic_routing) == sizeof(fch_apic_routing),
"PIC and APIC FCH interrupt tables must be the same size");
/*
* This controls the device -> IRQ routing.
*
* Hardcoded IRQs:
* 0: timer < soc/amd/common/acpi/lpc.asl
* 1: i8042 - Keyboard
* 2: cascade
* 8: rtc0 <- soc/amd/common/acpi/lpc.asl
* 9: acpi <- soc/amd/common/acpi/lpc.asl
*/
static const struct fch_irq_routing {
uint8_t intr_index;
uint8_t pic_irq_num;
uint8_t apic_irq_num;
} majolica_fch[] = {
{ PIRQ_A, PIRQ_NC, PIRQ_NC },
{ PIRQ_B, PIRQ_NC, PIRQ_NC },
{ PIRQ_C, PIRQ_NC, PIRQ_NC },
{ PIRQ_D, PIRQ_NC, PIRQ_NC },
{ PIRQ_E, PIRQ_NC, PIRQ_NC },
{ PIRQ_F, PIRQ_NC, PIRQ_NC },
{ PIRQ_G, PIRQ_NC, PIRQ_NC },
{ PIRQ_H, PIRQ_NC, PIRQ_NC },
{ PIRQ_SCI, PIRQ_NC, PIRQ_NC },
{ PIRQ_SD, PIRQ_NC, PIRQ_NC },
{ PIRQ_SDIO, PIRQ_NC, PIRQ_NC },
{ PIRQ_SATA, PIRQ_NC, PIRQ_NC },
{ PIRQ_EMMC, PIRQ_NC, PIRQ_NC },
{ PIRQ_GPIO, PIRQ_NC, PIRQ_NC },
{ PIRQ_I2C2, PIRQ_NC, PIRQ_NC },
{ PIRQ_I2C3, PIRQ_NC, PIRQ_NC },
{ PIRQ_UART0, 4, 4 },
{ PIRQ_UART1, 3, 3 },
/* The MISC registers are not interrupt numbers */
{ PIRQ_MISC, 0xfa, 0x00 },
{ PIRQ_MISC0, 0x91, 0x00 },
{ PIRQ_HPET_L, 0x00, 0x00 },
{ PIRQ_HPET_H, 0x00, 0x00 },
};
static void init_tables(void)
{
const struct fch_irq_routing *entry;
int i;
memset(fch_pic_routing, PIRQ_NC, sizeof(fch_pic_routing));
memset(fch_apic_routing, PIRQ_NC, sizeof(fch_apic_routing));
for (i = 0; i < ARRAY_SIZE(majolica_fch); i++) {
entry = majolica_fch + i;
fch_pic_routing[entry->intr_index] = entry->pic_irq_num;
fch_apic_routing[entry->intr_index] = entry->apic_irq_num;
}
}
static void pirq_setup(void)
{
init_tables();
intr_data_ptr = fch_apic_routing;
picr_data_ptr = fch_pic_routing;
}
static void mainboard_init(void *chip_info)
{
}
static void majolica_enable(struct device *dev)
{
printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable.\n");
/* Initialize the PIRQ data structures for consumption */
pirq_setup();
}
struct chip_operations mainboard_ops = {
.init = mainboard_init,
.enable_dev = majolica_enable,
};