Fix issue with PCIe power management setup

The current early PM setup that attempts to configure dynamic clock
gating relies on PCIe functions to be enabled that may not be.
Instead of reading port 0 or 4 directly to determine the link width
use the register that refelects the soft strapping options as this
will always be available.

Also add a clear register assignment and break for port 0 in the
switch statement instead of falling through to port 4 as that could
end up setting the slot power limit based on port 4 values instead
of based on port 0.
register 0xE1=0x3f and all other root ports should have 0xE1=0x03.

When port 0 and 4 are disabled they will have 0xE1=0x3C before
being disabled by the pch enable handler.

LUMPY default:

  00:1c.0 PCI bridge: Intel Corporation Device 1c10 (rev b5)
  00:1c.3 PCI bridge: Intel Corporation Device 1c16 (rev b5)

  pci_read8 0 0x1c 0 0xe1
  0x3f

  pci_read8 0 0x1c 3 0xe1
  0x03

LUMPY with PCIe port coalesce enabled:
  00:1c.0 PCI bridge: Intel Corporation Device 1c10 (rev b5)
  00:1c.1 PCI bridge: Intel Corporation Device 1c16 (rev b5)

  pci_read8 0 0x1c 0 0xe1
  0x3f

  pci_read8 0 0x1c 1 0xe1
  0x03

Change-Id: I33a37b0ec0c8e570cf5d9dda2c06e0225fee135c
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/980
Tested-by: build bot (Jenkins)
This commit is contained in:
Duncan Laurie 2012-04-27 10:58:22 -07:00 committed by Stefan Reinauer
parent b9fe01c881
commit 4aca5d7e66
1 changed files with 31 additions and 13 deletions

View File

@ -25,17 +25,6 @@
#include <device/pci_ids.h>
#include "pch.h"
static u16 pcie_port_link_width(int port)
{
u16 link_width;
link_width = pci_read_config16(
dev_find_slot(0, PCI_DEVFN(0x1c, port)), 0x52);
link_width >>= 4;
link_width &= 0x3f;
return link_width;
}
static void pch_pcie_pm_early(struct device *dev)
{
u16 link_width_p0, link_width_p4;
@ -43,8 +32,35 @@ static void pch_pcie_pm_early(struct device *dev)
u32 reg32;
u8 reg8;
link_width_p0 = pcie_port_link_width(0);
link_width_p4 = pcie_port_link_width(4);
reg32 = RCBA32(RPC);
/* Port 0-3 link aggregation from PCIEPCS1[1:0] soft strap */
switch (reg32 & 3) {
case 3:
link_width_p0 = 4;
break;
case 1:
case 2:
link_width_p0 = 2;
break;
case 0:
default:
link_width_p0 = 1;
}
/* Port 4-7 link aggregation from PCIEPCS2[1:0] soft strap */
switch ((reg32 >> 2) & 3) {
case 3:
link_width_p4 = 4;
break;
case 1:
case 2:
link_width_p4 = 2;
break;
case 0:
default:
link_width_p4 = 1;
}
/* Enable dynamic clock gating where needed */
reg8 = pci_read_config8(dev, 0xe1);
@ -54,6 +70,8 @@ static void pch_pcie_pm_early(struct device *dev)
slot_power_limit = 40; /* 40W for x4 */
else if (link_width_p0 == 2)
slot_power_limit = 20; /* 20W for x2 */
reg8 |= 0x3f;
break;
case 4: /* Port 4 */
if (link_width_p4 == 4)
slot_power_limit = 40; /* 40W for x4 */