more breakage, thanks to Ron
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1665 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This commit is contained in:
Ronald G. Minnich
parent
03acab694b
commit
4b93394872
|
|
@ -1,127 +1,3 @@
|
||||||
uses HAVE_MP_TABLE
|
|
||||||
uses HAVE_PIRQ_TABLE
|
|
||||||
uses USE_FALLBACK_IMAGE
|
|
||||||
uses HAVE_FALLBACK_BOOT
|
|
||||||
uses HAVE_HARD_RESET
|
|
||||||
uses HARD_RESET_BUS
|
|
||||||
uses HARD_RESET_DEVICE
|
|
||||||
uses HARD_RESET_FUNCTION
|
|
||||||
uses IRQ_SLOT_COUNT
|
|
||||||
uses HAVE_OPTION_TABLE
|
|
||||||
uses CONFIG_MAX_CPUS
|
|
||||||
uses CONFIG_IOAPIC
|
|
||||||
uses CONFIG_SMP
|
|
||||||
uses FALLBACK_SIZE
|
|
||||||
uses ROM_SIZE
|
|
||||||
uses ROM_SECTION_SIZE
|
|
||||||
uses ROM_IMAGE_SIZE
|
|
||||||
uses ROM_SECTION_SIZE
|
|
||||||
uses ROM_SECTION_OFFSET
|
|
||||||
uses CONFIG_ROM_STREAM
|
|
||||||
uses CONFIG_ROM_STREAM_START
|
|
||||||
uses PAYLOAD_SIZE
|
|
||||||
uses _ROMBASE
|
|
||||||
uses XIP_ROM_SIZE
|
|
||||||
uses XIP_ROM_BASE
|
|
||||||
uses STACK_SIZE
|
|
||||||
uses HEAP_SIZE
|
|
||||||
uses USE_OPTION_TABLE
|
|
||||||
uses LB_CKS_RANGE_START
|
|
||||||
uses LB_CKS_RANGE_END
|
|
||||||
uses LB_CKS_LOC
|
|
||||||
uses MAINBOARD_PART_NUMBER
|
|
||||||
uses MAINBOARD_VENDOR
|
|
||||||
uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
|
|
||||||
uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
|
|
||||||
|
|
||||||
|
|
||||||
## ROM_SIZE is the size of boot ROM that this board will use.
|
|
||||||
default ROM_SIZE=524288
|
|
||||||
|
|
||||||
###
|
|
||||||
### Build options
|
|
||||||
###
|
|
||||||
|
|
||||||
##
|
|
||||||
## Build code for the fallback boot
|
|
||||||
##
|
|
||||||
default HAVE_FALLBACK_BOOT=1
|
|
||||||
|
|
||||||
##
|
|
||||||
## Build code to reset the motherboard from linuxBIOS
|
|
||||||
##
|
|
||||||
default HAVE_HARD_RESET=1
|
|
||||||
|
|
||||||
default HARD_RESET_BUS=1
|
|
||||||
default HARD_RESET_DEVICE=4
|
|
||||||
default HARD_RESET_FUNCTION=0
|
|
||||||
|
|
||||||
##
|
|
||||||
## Build code to export a programmable irq routing table
|
|
||||||
##
|
|
||||||
default HAVE_PIRQ_TABLE=1
|
|
||||||
default IRQ_SLOT_COUNT=9
|
|
||||||
|
|
||||||
##
|
|
||||||
## Build code to export an x86 MP table
|
|
||||||
## Useful for specifying IRQ routing values
|
|
||||||
##
|
|
||||||
default HAVE_MP_TABLE=1
|
|
||||||
|
|
||||||
##
|
|
||||||
## Build code to export a CMOS option table
|
|
||||||
##
|
|
||||||
default HAVE_OPTION_TABLE=1
|
|
||||||
|
|
||||||
##
|
|
||||||
## Move the default LinuxBIOS cmos range off of AMD RTC registers
|
|
||||||
##
|
|
||||||
default LB_CKS_RANGE_START=49
|
|
||||||
default LB_CKS_RANGE_END=122
|
|
||||||
default LB_CKS_LOC=123
|
|
||||||
|
|
||||||
##
|
|
||||||
## Build code for SMP support
|
|
||||||
## Only worry about 2 micro processors
|
|
||||||
##
|
|
||||||
default CONFIG_SMP=1
|
|
||||||
default CONFIG_MAX_CPUS=2
|
|
||||||
|
|
||||||
##
|
|
||||||
## Build code to setup a generic IOAPIC
|
|
||||||
##
|
|
||||||
default CONFIG_IOAPIC=1
|
|
||||||
|
|
||||||
##
|
|
||||||
## Clean up the motherboard id strings
|
|
||||||
##
|
|
||||||
default MAINBOARD_PART_NUMBER="HDAMA"
|
|
||||||
default MAINBOARD_VENDOR="ARIMA"
|
|
||||||
default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x161f
|
|
||||||
default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x3016
|
|
||||||
|
|
||||||
###
|
|
||||||
### LinuxBIOS layout values
|
|
||||||
###
|
|
||||||
|
|
||||||
## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy.
|
|
||||||
default ROM_IMAGE_SIZE = 65536
|
|
||||||
|
|
||||||
##
|
|
||||||
## Use a small 8K stack
|
|
||||||
##
|
|
||||||
default STACK_SIZE=0x2000
|
|
||||||
|
|
||||||
##
|
|
||||||
## Use a small 32K heap
|
|
||||||
##
|
|
||||||
default HEAP_SIZE=0x8000
|
|
||||||
|
|
||||||
##
|
|
||||||
## Only use the option table in a normal image
|
|
||||||
##
|
|
||||||
default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE
|
|
||||||
|
|
||||||
##
|
##
|
||||||
## Compute the location and size of where this firmware image
|
## Compute the location and size of where this firmware image
|
||||||
## (linuxBIOS plus bootloader) will live in the boot rom chip.
|
## (linuxBIOS plus bootloader) will live in the boot rom chip.
|
||||||
|
|
@ -157,203 +33,72 @@ default _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE )
|
||||||
default XIP_ROM_SIZE=65536
|
default XIP_ROM_SIZE=65536
|
||||||
default XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE )
|
default XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE )
|
||||||
|
|
||||||
##
|
# sample config for arima/hdama
|
||||||
## Set all of the defaults for an x86 architecture
|
chip northbridge/amd/amdk8
|
||||||
##
|
print "HI MOM!\n"
|
||||||
|
device pnp cf8.0 on # cf8 config
|
||||||
arch i386 end
|
print "HI MOM!\n"
|
||||||
|
device pci 18.0 on # northbridge
|
||||||
##
|
print "HI MOM!\n"
|
||||||
## Build the objects we have code for in this directory.
|
# devices on link 0, link 0 == LDT 0
|
||||||
##
|
chip southbridge/amd/amd8131
|
||||||
|
print "SOUTH\n"
|
||||||
driver mainboard.o
|
# the on/off keyword is mandatory
|
||||||
if HAVE_MP_TABLE object mptable.o end
|
device pci 0.0 on end
|
||||||
if HAVE_PIRQ_TABLE object irq_tables.o end
|
print "SOUTH2\n"
|
||||||
|
device pci 0.1 on end
|
||||||
##
|
print "SOUTH3\n"
|
||||||
## Romcc output
|
device pci 1.0 on end
|
||||||
##
|
print "SOUTH4\n"
|
||||||
makerule ./failover.E
|
device pci 1.1 on end
|
||||||
depends "$(MAINBOARD)/failover.c"
|
|
||||||
action "$(CPP) -I$(TOP)/src $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/failover.c > ./failover.E"
|
|
||||||
end
|
|
||||||
|
|
||||||
makerule ./failover.inc
|
|
||||||
depends "./failover.E ./romcc"
|
|
||||||
action "./romcc -O -o failover.inc --label-prefix=failover ./failover.E"
|
|
||||||
end
|
|
||||||
|
|
||||||
makerule ./auto.E
|
|
||||||
depends "$(MAINBOARD)/auto.c option_table.h "
|
|
||||||
action "$(CPP) -I$(TOP)/src -I. $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/auto.c > ./auto.E"
|
|
||||||
end
|
|
||||||
makerule ./auto.inc
|
|
||||||
depends "./auto.E ./romcc"
|
|
||||||
action "./romcc -mcpu=k8 -O2 ./auto.E > auto.inc"
|
|
||||||
end
|
|
||||||
|
|
||||||
##
|
|
||||||
## Build our 16 bit and 32 bit linuxBIOS entry code
|
|
||||||
##
|
|
||||||
mainboardinit cpu/x86/16bit/entry16.inc
|
|
||||||
mainboardinit cpu/x86/32bit/entry32.inc
|
|
||||||
ldscript /cpu/x86/16bit/entry16.lds
|
|
||||||
ldscript /cpu/x86/32bit/entry32.lds
|
|
||||||
|
|
||||||
##
|
|
||||||
## Build our reset vector (This is where linuxBIOS is entered)
|
|
||||||
##
|
|
||||||
if USE_FALLBACK_IMAGE
|
|
||||||
mainboardinit cpu/x86/16bit/reset16.inc
|
|
||||||
ldscript /cpu/x86/16bit/reset16.lds
|
|
||||||
else
|
|
||||||
mainboardinit cpu/x86/32bit/reset32.inc
|
|
||||||
ldscript /cpu/x86/32bit/reset32.lds
|
|
||||||
end
|
|
||||||
|
|
||||||
### Should this be in the northbridge code?
|
|
||||||
mainboardinit arch/i386/lib/cpu_reset.inc
|
|
||||||
|
|
||||||
##
|
|
||||||
## Include an id string (For safe flashing)
|
|
||||||
##
|
|
||||||
mainboardinit arch/i386/lib/id.inc
|
|
||||||
ldscript /arch/i386/lib/id.lds
|
|
||||||
|
|
||||||
###
|
|
||||||
### This is the early phase of linuxBIOS startup
|
|
||||||
### Things are delicate and we test to see if we should
|
|
||||||
### failover to another image.
|
|
||||||
###
|
|
||||||
if USE_FALLBACK_IMAGE
|
|
||||||
ldscript /arch/i386/lib/failover.lds
|
|
||||||
mainboardinit ./failover.inc
|
|
||||||
end
|
|
||||||
|
|
||||||
###
|
|
||||||
### O.k. We aren't just an intermediary anymore!
|
|
||||||
###
|
|
||||||
|
|
||||||
##
|
|
||||||
## Setup RAM
|
|
||||||
##
|
|
||||||
mainboardinit cpu/x86/fpu/enable_fpu.inc
|
|
||||||
mainboardinit cpu/x86/mmx/enable_mmx.inc
|
|
||||||
mainboardinit cpu/x86/sse/enable_sse.inc
|
|
||||||
mainboardinit ./auto.inc
|
|
||||||
mainboardinit cpu/x86/sse/disable_sse.inc
|
|
||||||
mainboardinit cpu/x86/mmx/disable_mmx.inc
|
|
||||||
|
|
||||||
##
|
|
||||||
## Include the secondary Configuration files
|
|
||||||
##
|
|
||||||
dir /pc80
|
|
||||||
config chip.h
|
|
||||||
|
|
||||||
northbridge amd/amdk8 "mc0"
|
|
||||||
pnp cf8.0
|
|
||||||
northbridge amd/amdk8 "mc1" link 0
|
|
||||||
pci 0:19.0
|
|
||||||
pci 0:19.0
|
|
||||||
pci 0:19.0
|
|
||||||
pci 0:19.1
|
|
||||||
pci 0:19.2
|
|
||||||
pci 0:19.3
|
|
||||||
end
|
end
|
||||||
pci 1:18.0
|
chip southbridge/amd/amd8111
|
||||||
southbridge amd/amd8131 "amd8131" link 1
|
print "NEXT SOUTH\n"
|
||||||
pci 0:0.0
|
# this "device pci 0.0" is the parent the next one
|
||||||
pci 0:0.1
|
# PCI bridge
|
||||||
pci 0:1.0
|
device pci 0.0 on
|
||||||
pci 0:1.1
|
# this "device pci 0.0" is a child of the
|
||||||
|
# previous one
|
||||||
|
# devices behind the bridge
|
||||||
|
device pci 0.0 on end
|
||||||
|
device pci 0.1 on end
|
||||||
|
device pci 0.2 on end
|
||||||
|
# the device statement can span across multiple
|
||||||
|
# lines too
|
||||||
|
device pci 1.0
|
||||||
|
off
|
||||||
end
|
end
|
||||||
southbridge amd/amd8111 "amd8111" link 1
|
end
|
||||||
pci 0:0.0
|
device pci 1.0 on
|
||||||
pci 0:1.0 on
|
chip superio/NSC/pc87360
|
||||||
superio NSC/pc87360 link 1
|
device pnp 2e.3 on
|
||||||
pnp 2e.0 off # Floppy
|
|
||||||
io 0x60 = 0x3f0
|
|
||||||
irq 0x70 = 6
|
|
||||||
drq 0x74 = 2
|
|
||||||
pnp 2e.1 off # Parallel Port
|
|
||||||
io 0x60 = 0x378
|
|
||||||
irq 0x70 = 7
|
|
||||||
pnp 2e.2 off # Com 2
|
|
||||||
io 0x60 = 0x2f8
|
|
||||||
irq 0x70 = 3
|
|
||||||
pnp 2e.3 on # Com 1
|
|
||||||
io 0x60 = 0x3f8
|
io 0x60 = 0x3f8
|
||||||
irq 0x70 = 4
|
irq 0x70 = 4
|
||||||
pnp 2e.4 off # SWC
|
|
||||||
pnp 2e.5 off # Mouse
|
|
||||||
pnp 2e.6 on # Keyboard
|
|
||||||
io 0x60 = 0x60
|
|
||||||
io 0x62 = 0x64
|
|
||||||
irq 0x70 = 1
|
|
||||||
pnp 2e.7 off # GPIO
|
|
||||||
pnp 2e.8 off # ACB
|
|
||||||
pnp 2e.9 off # FSCM
|
|
||||||
pnp 2e.a off # WDT
|
|
||||||
end
|
end
|
||||||
pci 0:1.1 on
|
|
||||||
pci 0:1.2 on
|
|
||||||
pci 0:1.3 on # ACPI/SMBUS
|
|
||||||
chip drivers/generic/generic link 4
|
|
||||||
#phillips pca9545 smbus mux
|
|
||||||
i2c 70
|
|
||||||
# analog_devices adm1026
|
|
||||||
chip drivers/generic/generic link 0
|
|
||||||
i2c 2c
|
|
||||||
end
|
end
|
||||||
i2c 70
|
|
||||||
i2c 70
|
|
||||||
i2c 70
|
|
||||||
end
|
end
|
||||||
chip drivers/generic/generic link 4 #dimm 0-0-0
|
device pci 1.1 on end
|
||||||
i2c 50
|
device pci 1.2 off end
|
||||||
|
device pci 1.3 off end
|
||||||
|
device pci 1.5 on end
|
||||||
|
device pci 1.6 on end
|
||||||
end
|
end
|
||||||
chip drivers/generic/generic link 4 #dimm 0-0-1
|
end # device pci 18.0
|
||||||
i2c 51
|
device pci 18.0 on
|
||||||
|
# some non-existence devices on link 1
|
||||||
end
|
end
|
||||||
chip drivers/generic/generic link 4 #dimm 0-1-0
|
device pci 18.0 on
|
||||||
i2c 52
|
# some non-existence devices on link 2
|
||||||
end
|
end
|
||||||
chip drivers/generic/generic link 4 #dimm 0-1-1
|
device pci 18.1
|
||||||
i2c 53
|
# empty
|
||||||
end
|
end
|
||||||
chip drivers/generic/generic link 4 #dimm 1-0-0
|
device pci 18.2
|
||||||
i2c 54
|
# empty
|
||||||
end
|
end
|
||||||
chip drivers/generic/generic link 4 #dimm 1-0-1
|
device pci 18.3
|
||||||
i2c 55
|
# empty
|
||||||
end
|
end
|
||||||
chip drivers/generic/generic link 4 #dimm 1-1-0
|
end # device pnp
|
||||||
i2c 56
|
|
||||||
end
|
|
||||||
chip drivers/generic/generic link 4 #dimm 1-1-1
|
|
||||||
i2c 57
|
|
||||||
end
|
|
||||||
pci 0:1.5 off
|
|
||||||
pci 0:1.6 off
|
|
||||||
pci 1:0.0 on
|
|
||||||
pci 1:0.1 on
|
|
||||||
pci 1:0.2 on
|
|
||||||
pci 1:1.0 off
|
|
||||||
end
|
|
||||||
pci 1:18.0
|
|
||||||
pci 1:18.0
|
|
||||||
pci 1:18.1
|
|
||||||
pci 1:18.2
|
|
||||||
pci 1:18.3
|
|
||||||
end
|
|
||||||
|
|
||||||
|
|
||||||
cpu amd/socket_940 "cpu0" link 1
|
|
||||||
apic 0
|
|
||||||
end
|
|
||||||
|
|
||||||
cpu amd/socket_940 "cpu1" link 1
|
|
||||||
apic 1
|
|
||||||
end
|
end
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -0,0 +1,124 @@
|
||||||
|
uses HAVE_MP_TABLE
|
||||||
|
uses HAVE_PIRQ_TABLE
|
||||||
|
uses USE_FALLBACK_IMAGE
|
||||||
|
uses HAVE_FALLBACK_BOOT
|
||||||
|
uses HAVE_HARD_RESET
|
||||||
|
uses HARD_RESET_BUS
|
||||||
|
uses HARD_RESET_DEVICE
|
||||||
|
uses HARD_RESET_FUNCTION
|
||||||
|
uses IRQ_SLOT_COUNT
|
||||||
|
uses HAVE_OPTION_TABLE
|
||||||
|
uses CONFIG_MAX_CPUS
|
||||||
|
uses CONFIG_IOAPIC
|
||||||
|
uses CONFIG_SMP
|
||||||
|
uses FALLBACK_SIZE
|
||||||
|
uses ROM_SIZE
|
||||||
|
uses ROM_SECTION_SIZE
|
||||||
|
uses ROM_IMAGE_SIZE
|
||||||
|
uses ROM_SECTION_SIZE
|
||||||
|
uses ROM_SECTION_OFFSET
|
||||||
|
uses CONFIG_ROM_STREAM
|
||||||
|
uses CONFIG_ROM_STREAM_START
|
||||||
|
uses PAYLOAD_SIZE
|
||||||
|
uses _ROMBASE
|
||||||
|
uses XIP_ROM_SIZE
|
||||||
|
uses XIP_ROM_BASE
|
||||||
|
uses STACK_SIZE
|
||||||
|
uses HEAP_SIZE
|
||||||
|
uses USE_OPTION_TABLE
|
||||||
|
uses LB_CKS_RANGE_START
|
||||||
|
uses LB_CKS_RANGE_END
|
||||||
|
uses LB_CKS_LOC
|
||||||
|
uses MAINBOARD_PART_NUMBER
|
||||||
|
uses MAINBOARD_VENDOR
|
||||||
|
uses MAINBOARD
|
||||||
|
uses LINUXBIOS_EXTRA_VERSION
|
||||||
|
uses _RAMBASE
|
||||||
|
|
||||||
|
|
||||||
|
## ROM_SIZE is the size of boot ROM that this board will use.
|
||||||
|
default ROM_SIZE=524288
|
||||||
|
|
||||||
|
###
|
||||||
|
### Build options
|
||||||
|
###
|
||||||
|
|
||||||
|
##
|
||||||
|
## Build code for the fallback boot
|
||||||
|
##
|
||||||
|
default HAVE_FALLBACK_BOOT=1
|
||||||
|
|
||||||
|
##
|
||||||
|
## Build code to reset the motherboard from linuxBIOS
|
||||||
|
##
|
||||||
|
default HAVE_HARD_RESET=1
|
||||||
|
|
||||||
|
default HARD_RESET_BUS=1
|
||||||
|
default HARD_RESET_DEVICE=4
|
||||||
|
default HARD_RESET_FUNCTION=0
|
||||||
|
|
||||||
|
##
|
||||||
|
## Build code to export a programmable irq routing table
|
||||||
|
##
|
||||||
|
default HAVE_PIRQ_TABLE=1
|
||||||
|
default IRQ_SLOT_COUNT=9
|
||||||
|
|
||||||
|
##
|
||||||
|
## Build code to export an x86 MP table
|
||||||
|
## Useful for specifying IRQ routing values
|
||||||
|
##
|
||||||
|
default HAVE_MP_TABLE=1
|
||||||
|
|
||||||
|
##
|
||||||
|
## Build code to export a CMOS option table
|
||||||
|
##
|
||||||
|
default HAVE_OPTION_TABLE=1
|
||||||
|
|
||||||
|
##
|
||||||
|
## Move the default LinuxBIOS cmos range off of AMD RTC registers
|
||||||
|
##
|
||||||
|
default LB_CKS_RANGE_START=49
|
||||||
|
default LB_CKS_RANGE_END=122
|
||||||
|
default LB_CKS_LOC=123
|
||||||
|
|
||||||
|
##
|
||||||
|
## Build code for SMP support
|
||||||
|
## Only worry about 2 micro processors
|
||||||
|
##
|
||||||
|
default CONFIG_SMP=1
|
||||||
|
default CONFIG_MAX_CPUS=2
|
||||||
|
|
||||||
|
##
|
||||||
|
## Build code to setup a generic IOAPIC
|
||||||
|
##
|
||||||
|
default CONFIG_IOAPIC=1
|
||||||
|
|
||||||
|
##
|
||||||
|
## Clean up the motherboard id strings
|
||||||
|
##
|
||||||
|
default MAINBOARD_PART_NUMBER="HDAMA"
|
||||||
|
default MAINBOARD_VENDOR="ARIMA"
|
||||||
|
|
||||||
|
###
|
||||||
|
### LinuxBIOS layout values
|
||||||
|
###
|
||||||
|
|
||||||
|
## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy.
|
||||||
|
default ROM_IMAGE_SIZE = 65536
|
||||||
|
|
||||||
|
##
|
||||||
|
## Use a small 8K stack
|
||||||
|
##
|
||||||
|
default STACK_SIZE=0x2000
|
||||||
|
|
||||||
|
##
|
||||||
|
## Use a small 16K heap
|
||||||
|
##
|
||||||
|
default HEAP_SIZE=0x4000
|
||||||
|
|
||||||
|
##
|
||||||
|
## Only use the option table in a normal image
|
||||||
|
##
|
||||||
|
default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE
|
||||||
|
default _RAMBASE=0x00004000
|
||||||
|
end
|
||||||
|
|
@ -2,97 +2,15 @@
|
||||||
# the Arima HDAMA
|
# the Arima HDAMA
|
||||||
# This will make a target directory of ./hdama
|
# This will make a target directory of ./hdama
|
||||||
|
|
||||||
loadoptions
|
|
||||||
|
|
||||||
target hdama
|
target hdama
|
||||||
|
mainboard arima/hdama
|
||||||
|
|
||||||
uses ARCH
|
|
||||||
uses CONFIG_COMPRESS
|
|
||||||
uses CONFIG_IOAPIC
|
|
||||||
uses CONFIG_ROM_STREAM
|
|
||||||
uses CONFIG_ROM_STREAM_START
|
|
||||||
uses CONFIG_UDELAY_TSC
|
|
||||||
uses CPU_FIXUP
|
|
||||||
uses FALLBACK_SIZE
|
|
||||||
uses HAVE_FALLBACK_BOOT
|
|
||||||
uses HAVE_MP_TABLE
|
|
||||||
uses HAVE_PIRQ_TABLE
|
|
||||||
uses HAVE_HARD_RESET
|
|
||||||
uses i586
|
|
||||||
uses i686
|
|
||||||
uses INTEL_PPRO_MTRR
|
|
||||||
uses HEAP_SIZE
|
|
||||||
uses IRQ_SLOT_COUNT
|
|
||||||
uses k7
|
|
||||||
uses k8
|
|
||||||
uses MAINBOARD_PART_NUMBER
|
|
||||||
uses MAINBOARD_VENDOR
|
|
||||||
uses CONFIG_SMP
|
|
||||||
uses CONFIG_MAX_CPUS
|
|
||||||
uses MEMORY_HOLE
|
|
||||||
uses PAYLOAD_SIZE
|
|
||||||
uses _RAMBASE
|
|
||||||
uses _ROMBASE
|
|
||||||
uses ROM_IMAGE_SIZE
|
|
||||||
uses ROM_SECTION_OFFSET
|
|
||||||
uses ROM_SECTION_SIZE
|
|
||||||
uses ROM_SIZE
|
|
||||||
uses STACK_SIZE
|
|
||||||
uses USE_FALLBACK_IMAGE
|
|
||||||
uses USE_OPTION_TABLE
|
|
||||||
uses HAVE_OPTION_TABLE
|
|
||||||
uses MAXIMUM_CONSOLE_LOGLEVEL
|
|
||||||
uses DEFAULT_CONSOLE_LOGLEVEL
|
|
||||||
uses CONFIG_CONSOLE_SERIAL8250
|
|
||||||
uses MAINBOARD
|
|
||||||
uses CONFIG_CHIP_CONFIGURE
|
|
||||||
uses XIP_ROM_SIZE
|
|
||||||
uses XIP_ROM_BASE
|
|
||||||
uses LINUXBIOS_EXTRA_VERSION
|
|
||||||
|
|
||||||
option CONFIG_CHIP_CONFIGURE=1
|
|
||||||
|
|
||||||
option MAXIMUM_CONSOLE_LOGLEVEL=8
|
|
||||||
option DEFAULT_CONSOLE_LOGLEVEL=8
|
|
||||||
option CONFIG_CONSOLE_SERIAL8250=1
|
|
||||||
|
|
||||||
option CPU_FIXUP=1
|
|
||||||
option CONFIG_UDELAY_TSC=0
|
|
||||||
option i686=1
|
|
||||||
option i586=1
|
|
||||||
option INTEL_PPRO_MTRR=1
|
|
||||||
option k7=1
|
|
||||||
option k8=1
|
|
||||||
|
|
||||||
option ROM_SIZE=524288
|
|
||||||
|
|
||||||
|
|
||||||
option HAVE_OPTION_TABLE=1
|
|
||||||
option CONFIG_ROM_STREAM=1
|
|
||||||
option HAVE_FALLBACK_BOOT=1
|
|
||||||
|
|
||||||
###
|
|
||||||
### Compute the location and size of where this firmware image
|
|
||||||
### (linuxBIOS plus bootloader) will live in the boot rom chip.
|
|
||||||
###
|
|
||||||
option FALLBACK_SIZE=131072
|
|
||||||
|
|
||||||
## LinuxBIOS C code runs at this location in RAM
|
|
||||||
option _RAMBASE=0x00004000
|
|
||||||
|
|
||||||
#
|
|
||||||
###
|
|
||||||
### Compute the start location and size size of
|
|
||||||
### The linuxBIOS bootloader.
|
|
||||||
###
|
|
||||||
|
|
||||||
#
|
|
||||||
# Arima hdama
|
# Arima hdama
|
||||||
romimage "normal"
|
romimage "normal"
|
||||||
option USE_FALLBACK_IMAGE=0
|
option USE_FALLBACK_IMAGE=0
|
||||||
option ROM_IMAGE_SIZE=0x10000
|
option ROM_IMAGE_SIZE=0x10000
|
||||||
option LINUXBIOS_EXTRA_VERSION=".0Normal"
|
option LINUXBIOS_EXTRA_VERSION=".0Normal"
|
||||||
mainboard arima/hdama
|
|
||||||
payload /usr/share/etherboot/5.2.1eb1-lnxi-lb/tg3--ide_disk.zelf
|
payload /usr/share/etherboot/5.2.1eb1-lnxi-lb/tg3--ide_disk.zelf
|
||||||
end
|
end
|
||||||
|
|
||||||
|
|
@ -100,7 +18,6 @@ romimage "fallback"
|
||||||
option USE_FALLBACK_IMAGE=1
|
option USE_FALLBACK_IMAGE=1
|
||||||
option ROM_IMAGE_SIZE=0x10000
|
option ROM_IMAGE_SIZE=0x10000
|
||||||
option LINUXBIOS_EXTRA_VERSION=".0Fallback"
|
option LINUXBIOS_EXTRA_VERSION=".0Fallback"
|
||||||
mainboard arima/hdama
|
|
||||||
payload /usr/share/etherboot/5.2.1eb1-lnxi-lb/tg3--ide_disk.zelf
|
payload /usr/share/etherboot/5.2.1eb1-lnxi-lb/tg3--ide_disk.zelf
|
||||||
# use this to test a build if you don't have the etherboot
|
# use this to test a build if you don't have the etherboot
|
||||||
# payload /etc/hosts
|
# payload /etc/hosts
|
||||||
|
|
|
||||||
|
|
@ -12,6 +12,7 @@ errors = 0
|
||||||
target_dir = ''
|
target_dir = ''
|
||||||
target_name = ''
|
target_name = ''
|
||||||
treetop = ''
|
treetop = ''
|
||||||
|
full_mainboard_path = ''
|
||||||
global_options = {}
|
global_options = {}
|
||||||
global_options_by_order = []
|
global_options_by_order = []
|
||||||
global_option_values = {}
|
global_option_values = {}
|
||||||
|
|
@ -841,6 +842,7 @@ def newoptionvalue(name, image):
|
||||||
|
|
||||||
def getoptionvalue(name, op, image):
|
def getoptionvalue(name, op, image):
|
||||||
global global_option_values
|
global global_option_values
|
||||||
|
#print "getoptionvalue name %s op %s image %s\n" % (name, op,image)
|
||||||
if (op == 0):
|
if (op == 0):
|
||||||
fatal("Option %s undefined (missing use command?)" % name)
|
fatal("Option %s undefined (missing use command?)" % name)
|
||||||
if (image):
|
if (image):
|
||||||
|
|
@ -856,12 +858,16 @@ def getoption(name, image):
|
||||||
|
|
||||||
global global_uses_options, alloptions, curimage
|
global global_uses_options, alloptions, curimage
|
||||||
|
|
||||||
|
#print "getoption: name %s image %s alloptions %s curimage %s\n\n" % (name, image, alloptions, curimage)
|
||||||
curpart = partstack.tos()
|
curpart = partstack.tos()
|
||||||
if (alloptions):
|
if (alloptions):
|
||||||
|
#print "ALLOPTIONS\n"
|
||||||
o = getdict(global_options, name)
|
o = getdict(global_options, name)
|
||||||
elif (curpart):
|
elif (curpart):
|
||||||
|
#print "CURPART\n"
|
||||||
o = getdict(curpart.uses_options, name)
|
o = getdict(curpart.uses_options, name)
|
||||||
else:
|
else:
|
||||||
|
#print "GLOBAL_USES_OPTIONS\n"
|
||||||
o = getdict(global_uses_options, name)
|
o = getdict(global_uses_options, name)
|
||||||
v = getoptionvalue(name, o, image)
|
v = getoptionvalue(name, o, image)
|
||||||
if (v == 0):
|
if (v == 0):
|
||||||
|
|
@ -1057,12 +1063,12 @@ def validdef(name, defval):
|
||||||
if ((defval & 4) != 4):
|
if ((defval & 4) != 4):
|
||||||
fatal("Must specify comment for option %s" % name)
|
fatal("Must specify comment for option %s" % name)
|
||||||
|
|
||||||
def loadoptions():
|
def loadoptions(path, file, rule):
|
||||||
file = os.path.join('src', 'config', 'Options.lb')
|
file = os.path.join('src', path, file)
|
||||||
optionsfile = os.path.join(treetop, file)
|
optionsfile = os.path.join(treetop, file)
|
||||||
fp = safe_open(optionsfile, 'r')
|
fp = safe_open(optionsfile, 'r')
|
||||||
loc.push(file)
|
loc.push(file)
|
||||||
if (not parse('options', fp.read())):
|
if (not parse(rule, fp.read())):
|
||||||
fatal("Could not parse file")
|
fatal("Could not parse file")
|
||||||
loc.pop()
|
loc.pop()
|
||||||
|
|
||||||
|
|
@ -1112,7 +1118,7 @@ def payload(path):
|
||||||
|
|
||||||
def startromimage(name):
|
def startromimage(name):
|
||||||
global romimages, curimage, target_dir, target_name
|
global romimages, curimage, target_dir, target_name
|
||||||
print "Configuring ROMIMAGE %s" % name
|
print "Configuring ROMIMAGE %s Curimage %s" % (name, curimage)
|
||||||
o = getdict(romimages, name)
|
o = getdict(romimages, name)
|
||||||
if (o):
|
if (o):
|
||||||
fatal("romimage %s previously defined" % name)
|
fatal("romimage %s previously defined" % name)
|
||||||
|
|
@ -1124,19 +1130,29 @@ def startromimage(name):
|
||||||
|
|
||||||
def endromimage():
|
def endromimage():
|
||||||
global curimage
|
global curimage
|
||||||
|
mainboard()
|
||||||
print "End ROMIMAGE"
|
print "End ROMIMAGE"
|
||||||
curimage = 0
|
curimage = 0
|
||||||
#curpart = 0
|
#curpart = 0
|
||||||
|
|
||||||
def mainboard(path):
|
def mainboardsetup(path):
|
||||||
full_path = os.path.join(treetop, 'src', 'mainboard', path)
|
global full_mainboard_path
|
||||||
|
mainboard_path = os.path.join('mainboard', path)
|
||||||
|
loadoptions(mainboard_path, 'Options.lb', 'mainboardvariables')
|
||||||
|
full_mainboard_path = os.path.join(treetop, 'src', 'mainboard', path)
|
||||||
vendor = re.sub("/.*", "", path)
|
vendor = re.sub("/.*", "", path)
|
||||||
part_number = re.sub("[^/]*/", "", path)
|
part_number = re.sub("[^/]*/", "", path)
|
||||||
setdefault('MAINBOARD', full_path, 0)
|
setdefault('MAINBOARD', full_mainboard_path, 0)
|
||||||
setdefault('MAINBOARD_VENDOR', vendor, 0)
|
setdefault('MAINBOARD_VENDOR', vendor, 0)
|
||||||
setdefault('MAINBOARD_PART_NUMBER', part_number, 0)
|
setdefault('MAINBOARD_PART_NUMBER', part_number, 0)
|
||||||
dodir('/config', 'Config.lb')
|
|
||||||
part('mainboard', path, 'Config.lb', 0, 0)
|
def mainboard():
|
||||||
|
# a mainboard is no longer really a part as such.
|
||||||
|
# so just do the config file for the mainboard
|
||||||
|
#part('mainboard', full_mainboard_path, 'Config.lb', 0, 0)
|
||||||
|
global full_mainboard_path
|
||||||
|
mainboard_path = os.path.join(full_mainboard_path)
|
||||||
|
loadoptions(mainboard_path, 'Config.lb', 'cfgfile')
|
||||||
curimage.setroot(partstack.tos())
|
curimage.setroot(partstack.tos())
|
||||||
partpop()
|
partpop()
|
||||||
|
|
||||||
|
|
@ -1177,6 +1193,16 @@ def cpudir(path):
|
||||||
dodir(srcdir, "Config.lb")
|
dodir(srcdir, "Config.lb")
|
||||||
cpu_type = path
|
cpu_type = path
|
||||||
|
|
||||||
|
def simplepart(type):
|
||||||
|
global curimage, dirstack, partstack
|
||||||
|
newpart = partobj(curimage, 0, partstack.tos(), type, \
|
||||||
|
'', 0, 0)
|
||||||
|
print "Configuring PART %s" % (type)
|
||||||
|
partstack.push(newpart)
|
||||||
|
print " new PART tos is now %s\n" %partstack.tos()
|
||||||
|
# just push TOS, so that we can pop later.
|
||||||
|
dirstack.push(dirstack.tos())
|
||||||
|
|
||||||
def part(type, path, file, name, link):
|
def part(type, path, file, name, link):
|
||||||
global curimage, dirstack, partstack
|
global curimage, dirstack, partstack
|
||||||
partdir = os.path.join(type, path)
|
partdir = os.path.join(type, path)
|
||||||
|
|
@ -1187,6 +1213,7 @@ def part(type, path, file, name, link):
|
||||||
type_name, name, link)
|
type_name, name, link)
|
||||||
print "Configuring PART %s, path %s" % (type, path)
|
print "Configuring PART %s, path %s" % (type, path)
|
||||||
partstack.push(newpart)
|
partstack.push(newpart)
|
||||||
|
print " new PART tos is now %s\n" %partstack.tos()
|
||||||
dirstack.push(fulldir)
|
dirstack.push(fulldir)
|
||||||
# special case for 'cpu' parts.
|
# special case for 'cpu' parts.
|
||||||
# we could add a new function too, but this is rather trivial.
|
# we could add a new function too, but this is rather trivial.
|
||||||
|
|
@ -1209,6 +1236,7 @@ def partpop():
|
||||||
notice("Option %s using default value %s" % (op, getformated(op, curpart.image)))
|
notice("Option %s using default value %s" % (op, getformated(op, curpart.image)))
|
||||||
partstack.pop()
|
partstack.pop()
|
||||||
dirstack.pop()
|
dirstack.pop()
|
||||||
|
print "partstack.pop, TOS is now %s\n" % partstack.tos()
|
||||||
|
|
||||||
def dodir(path, file):
|
def dodir(path, file):
|
||||||
"""dodir is like part but there is no new part"""
|
"""dodir is like part but there is no new part"""
|
||||||
|
|
@ -1334,6 +1362,7 @@ parser Config:
|
||||||
token DEFAULT: 'default'
|
token DEFAULT: 'default'
|
||||||
token DEFINE: 'define'
|
token DEFINE: 'define'
|
||||||
token DEPENDS: 'depends'
|
token DEPENDS: 'depends'
|
||||||
|
token DEVICE: 'device'
|
||||||
token DIR: 'dir'
|
token DIR: 'dir'
|
||||||
token DRIVER: 'driver'
|
token DRIVER: 'driver'
|
||||||
token DRQ: 'drq'
|
token DRQ: 'drq'
|
||||||
|
|
@ -1514,26 +1543,32 @@ parser Config:
|
||||||
{{ if (C): partstack.tos().end_resources() }}
|
{{ if (C): partstack.tos().end_resources() }}
|
||||||
|
|
||||||
|
|
||||||
rule pci<<C>>: PCI HEX_NUM {{ bus = int(HEX_NUM,16) }}
|
rule pci<<C>>: PCI {{ if (C): simplepart('pci') }}
|
||||||
':' HEX_NUM {{ slot = int(HEX_NUM,16) }}
|
|
||||||
|
HEX_NUM {{ slot = int(HEX_NUM,16) }}
|
||||||
'.' HEX_NUM {{ function = int(HEX_NUM, 16) }}
|
'.' HEX_NUM {{ function = int(HEX_NUM, 16) }}
|
||||||
enable
|
enable
|
||||||
{{ if (C): partstack.tos().addpcipath(enable, bus, slot, function) }}
|
{{ if (C): partstack.tos().addpcipath(enable, 0, slot, function) }}
|
||||||
resources<<C>>
|
resources<<C>>
|
||||||
|
partend<<C>>
|
||||||
|
|
||||||
rule pnp<<C>>: PNP HEX_NUM {{ port = int(HEX_NUM,16) }}
|
rule pnp<<C>>: PNP {{ if (C): simplepart('pnp') }}
|
||||||
|
HEX_NUM {{ port = int(HEX_NUM,16) }}
|
||||||
'.' HEX_NUM {{ device = int(HEX_NUM, 16) }}
|
'.' HEX_NUM {{ device = int(HEX_NUM, 16) }}
|
||||||
enable
|
enable
|
||||||
{{ if (C): partstack.tos().addpnppath(enable, port, device) }}
|
{{ if (C): partstack.tos().addpnppath(enable, port, device) }}
|
||||||
resources<<C>>
|
resources<<C>>
|
||||||
|
partend<<C>>
|
||||||
|
|
||||||
|
|
||||||
rule i2c<<C>>: I2C HEX_NUM {{ device = int(HEX_NUM, 16) }}
|
rule i2c<<C>>: I2C {{ if (C): simplepart('i2c') }}
|
||||||
|
HEX_NUM {{ device = int(HEX_NUM, 16) }}
|
||||||
enable
|
enable
|
||||||
{{ if (C): partstack.tos().addi2cpath(enable, device) }}
|
{{ if (C): partstack.tos().addi2cpath(enable, device) }}
|
||||||
resources<<C>>
|
resources<<C>>
|
||||||
|
|
||||||
rule apic<<C>>: APIC HEX_NUM {{ apic_id = int(HEX_NUM, 16) }}
|
rule apic<<C>>: APIC {{ if (C): simplepart('apic') }}
|
||||||
|
HEX_NUM {{ apic_id = int(HEX_NUM, 16) }}
|
||||||
enable
|
enable
|
||||||
{{ if (C): partstack.tos().addapicpath(enable, apic_id) }}
|
{{ if (C): partstack.tos().addapicpath(enable, apic_id) }}
|
||||||
resources<<C>>
|
resources<<C>>
|
||||||
|
|
@ -1558,6 +1593,8 @@ parser Config:
|
||||||
|
|
||||||
rule config<<C>>: CONFIG PATH {{ if (C): addconfig(PATH) }}
|
rule config<<C>>: CONFIG PATH {{ if (C): addconfig(PATH) }}
|
||||||
|
|
||||||
|
rule device<<C>>: DEVICE dev_path<<C>>
|
||||||
|
|
||||||
rule stmt<<C>>: arch<<C>> {{ return arch}}
|
rule stmt<<C>>: arch<<C>> {{ return arch}}
|
||||||
| addaction<<C>> {{ return addaction }}
|
| addaction<<C>> {{ return addaction }}
|
||||||
| config<<C>> {{ return config}}
|
| config<<C>> {{ return config}}
|
||||||
|
|
@ -1577,17 +1614,26 @@ parser Config:
|
||||||
| partdef<<C>> {{ return partdef }}
|
| partdef<<C>> {{ return partdef }}
|
||||||
| prtstmt<<C>> {{ return prtstmt }}
|
| prtstmt<<C>> {{ return prtstmt }}
|
||||||
| register<<C>> {{ return register }}
|
| register<<C>> {{ return register }}
|
||||||
| dev_path<<C>> {{ return dev_path }}
|
| device<<C>> {{ return device }}
|
||||||
|
|
||||||
# ENTRY for parsing Config.lb file
|
# ENTRY for parsing Config.lb file
|
||||||
rule cfgfile: (uses<<1>>)*
|
rule cfgfile: (uses<<1>>)*
|
||||||
(stmt<<1>>)*
|
(stmt<<1>>)*
|
||||||
EOF {{ return 1 }}
|
EOF {{ return 1 }}
|
||||||
|
|
||||||
|
rule cfgfile: (uses<<1>>)*
|
||||||
|
(stmt<<1>>)*
|
||||||
|
EOF {{ return 1 }}
|
||||||
|
|
||||||
rule usesid<<C>>: ID {{ if (C): usesoption(ID) }}
|
rule usesid<<C>>: ID {{ if (C): usesoption(ID) }}
|
||||||
|
|
||||||
rule uses<<C>>: USES (usesid<<C>>)+
|
rule uses<<C>>: USES (usesid<<C>>)+
|
||||||
|
|
||||||
|
rule mainboardvariables: (uses<<1>>)*
|
||||||
|
(default<<1>>)*
|
||||||
|
(option<<1>>)*
|
||||||
|
END {{ return 1}}
|
||||||
|
|
||||||
rule value: STR {{ return dequote(STR) }}
|
rule value: STR {{ return dequote(STR) }}
|
||||||
| expr {{ return expr }}
|
| expr {{ return expr }}
|
||||||
| DELEXPR {{ return DELEXPR }}
|
| DELEXPR {{ return DELEXPR }}
|
||||||
|
|
@ -1605,8 +1651,8 @@ parser Config:
|
||||||
|
|
||||||
rule payload<<C>>: PAYLOAD DIRPATH {{ if (C): payload(DIRPATH) }}
|
rule payload<<C>>: PAYLOAD DIRPATH {{ if (C): payload(DIRPATH) }}
|
||||||
|
|
||||||
rule mainboard<<C>>:
|
rule mainboard:
|
||||||
MAINBOARD PATH {{ if (C): mainboard(PATH) }}
|
MAINBOARD PATH {{ mainboardsetup(PATH) }}
|
||||||
|
|
||||||
rule romif<<C>>: IF ID {{ c = lookup(ID) }}
|
rule romif<<C>>: IF ID {{ c = lookup(ID) }}
|
||||||
(romstmt<<C and c>>)*
|
(romstmt<<C and c>>)*
|
||||||
|
|
@ -1615,7 +1661,6 @@ parser Config:
|
||||||
|
|
||||||
rule romstmt<<C>>: romif<<C>>
|
rule romstmt<<C>>: romif<<C>>
|
||||||
| option<<C>>
|
| option<<C>>
|
||||||
| mainboard<<C>>
|
|
||||||
| payload<<C>>
|
| payload<<C>>
|
||||||
|
|
||||||
rule romimage: ROMIMAGE STR {{ startromimage(dequote(STR)) }}
|
rule romimage: ROMIMAGE STR {{ startromimage(dequote(STR)) }}
|
||||||
|
|
@ -1633,9 +1678,9 @@ parser Config:
|
||||||
| opstmt<<1>>
|
| opstmt<<1>>
|
||||||
|
|
||||||
# ENTRY for parsing root part
|
# ENTRY for parsing root part
|
||||||
rule board: LOADOPTIONS {{ loadoptions() }}
|
rule board: {{ loadoptions("config", "Options.lb", "options") }}
|
||||||
TARGET DIRPATH {{ target(DIRPATH) }}
|
TARGET DIRPATH {{ target(DIRPATH) }}
|
||||||
(uses<<1>>)*
|
mainboard
|
||||||
(romstmts)*
|
(romstmts)*
|
||||||
EOF {{ return 1 }}
|
EOF {{ return 1 }}
|
||||||
|
|
||||||
|
|
|
||||||
Loading…
Reference in New Issue