amd/gardenia: Correct SPD AGESA callout

Gardenia makes no special considerations for a board_id regarding
SPD access and addressing.  Remove this from the source and use
the standard AGESA call.

Make SPD address changes to devicetree.cb.  Note that Gardenia is
designed to be a two channel, single DIMM/channel system (some SKUs
with two DIMMs on the second channel).  However, this port is for
the Stoney processor which is a single channel.  As a result, the
second DIMM slot is not usable.  A future improvement could involve
a port using a different processor, with unique devicetree files
for each.

Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Original-Reviewed-by: Marc Jones <marcj303@gmail.com>
(cherry picked from commit 77511f98f819dfe08c3ed16ebc11e1b328bdca15)

Change-Id: Id00c2be83340ceeec043ec86e96779e6bf46ae7b
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/17219
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
This commit is contained in:
Marshall Dawson 2016-10-08 09:53:58 -06:00 committed by Martin Roth
parent 91135fef22
commit 4bbea90417
2 changed files with 5 additions and 48 deletions

View File

@ -1,7 +1,7 @@
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2015 Advanced Micro Devices, Inc.
* Copyright (C) 2015-2016 Advanced Micro Devices, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@ -35,14 +35,13 @@
#include <boardid.h>
static AGESA_STATUS Fch_Oem_config(UINT32 Func, UINT32 FchData, VOID *ConfigPtr);
static AGESA_STATUS board_ReadSpd(UINT32 Func, UINTN Data, VOID *ConfigPtr);
const BIOS_CALLOUT_STRUCT BiosCallouts[] =
{
{AGESA_ALLOCATE_BUFFER, agesa_AllocateBuffer },
{AGESA_DEALLOCATE_BUFFER, agesa_DeallocateBuffer },
{AGESA_LOCATE_BUFFER, agesa_LocateBuffer },
{AGESA_READ_SPD, board_ReadSpd },
{AGESA_READ_SPD, agesa_ReadSpd },
{AGESA_DO_RESET, agesa_Reset },
{AGESA_READ_SPD_RECOVERY, agesa_NoopUnsupported },
{AGESA_RUNFUNC_ONAP, agesa_RunFuncOnAp },
@ -104,43 +103,6 @@ AGESA_STATUS Fch_Oem_config(UINT32 Func, UINT32 FchData, VOID *ConfigPtr)
return AGESA_SUCCESS;
}
static AGESA_STATUS board_ReadSpd(UINT32 Func, UINTN Data, VOID *ConfigPtr)
{
#ifdef __PRE_RAM__
int spdAddress;
AGESA_READ_SPD_PARAMS *info = ConfigPtr;
ROMSTAGE_CONST struct device *dev = dev_find_slot(0, PCI_DEVFN(0x18, 2));
ROMSTAGE_CONST struct northbridge_amd_pi_00670F00_config *config = dev->chip_info;
UINT8 spdAddrLookup_rev_F [2][2][4]= {
{ {0xA0, 0xA2}, {0xA4, 0xAC}, }, /* socket 0 - Channel 0 & 1 - 8-bit SPD addresses */
{ {0x00, 0x00}, {0x00, 0x00}, }, /* socket 1 - Channel 0 & 1 - 8-bit SPD addresses */
};
if ((dev == 0) || (config == 0))
return AGESA_ERROR;
if (info->SocketId >= ARRAY_SIZE(config->spdAddrLookup))
return AGESA_ERROR;
if (info->MemChannelId >= ARRAY_SIZE(config->spdAddrLookup[0]))
return AGESA_ERROR;
if (info->DimmId >= ARRAY_SIZE(config->spdAddrLookup[0][0]))
return AGESA_ERROR;
if (board_id() == 'F')
spdAddress = spdAddrLookup_rev_F
[info->SocketId] [info->MemChannelId] [info->DimmId];
else
spdAddress = config->spdAddrLookup
[info->SocketId] [info->MemChannelId] [info->DimmId];
if (spdAddress == 0)
return AGESA_ERROR;
int err = hudson_readSpd(spdAddress, (void *) info->Buffer, 128);
if (err)
return AGESA_ERROR;
#endif
return AGESA_SUCCESS;
}
#ifdef __PRE_RAM__
const PSO_ENTRY DDR4PlatformMemoryConfiguration[] = {
@ -157,8 +119,6 @@ const PSO_ENTRY DDR4PlatformMemoryConfiguration[] = {
void OemPostParams(AMD_POST_PARAMS *PostParams)
{
if (board_id() == 'F') {
PostParams->MemConfig.PlatformMemoryConfiguration = (PSO_ENTRY *)DDR4PlatformMemoryConfiguration;
}
}
#endif

View File

@ -1,7 +1,7 @@
#
# This file is part of the coreboot project.
#
# Copyright (C) 2015 Advanced Micro Devices, Inc.
# Copyright (C) 2015-2016 Advanced Micro Devices, Inc.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
@ -42,10 +42,7 @@ chip northbridge/amd/pi/00670F00/root_complex
device pci 11.0 on end # SATA
device pci 12.0 on end # EHCI
device pci 14.0 on # SM
chip drivers/generic/generic #dimm 0-0-0
device i2c 50 on end
end
chip drivers/generic/generic #dimm 0-0-1
chip drivers/generic/generic # dimm 0-0-0
device i2c 51 on end
end
end # SM