From 4c3ab7376ebb2e3e18919f1ab663d317dfec9b9c Mon Sep 17 00:00:00 2001 From: Martin Roth Date: Mon, 8 Jul 2013 16:23:54 -0600 Subject: [PATCH] cpu: Fix spelling Change-Id: I69c46648de0689e9bed84c7726906024ad65e769 Signed-off-by: Martin Roth Reviewed-on: http://review.coreboot.org/3729 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer --- src/cpu/amd/car/post_cache_as_ram.c | 4 ++-- src/cpu/amd/dualcore/amd_sibling.c | 4 ++-- src/cpu/amd/geode_gx2/cpubug.c | 6 +++--- src/cpu/amd/geode_gx2/cpureginit.c | 4 ++-- src/cpu/amd/geode_lx/cpubug.c | 2 +- src/cpu/amd/model_10xxx/defaults.h | 2 +- src/cpu/amd/model_10xxx/fidvid.c | 6 +++--- src/cpu/amd/model_10xxx/init_cpus.c | 2 +- src/cpu/amd/model_fxx/fidvid.c | 4 ++-- src/cpu/amd/model_fxx/model_fxx_init.c | 2 +- src/cpu/amd/model_fxx/powernow_acpi.c | 6 +++--- src/cpu/amd/mtrr/amd_mtrr.c | 4 ++-- src/cpu/amd/quadcore/amd_sibling.c | 4 ++-- src/cpu/intel/haswell/haswell.h | 2 +- src/cpu/intel/haswell/haswell_init.c | 10 +++++----- src/cpu/intel/haswell/mp_init.c | 8 ++++---- src/cpu/intel/haswell/smmrelocate.c | 2 +- src/cpu/intel/model_2065x/model_2065x_init.c | 4 ++-- src/cpu/intel/model_206ax/model_206ax_init.c | 4 ++-- src/cpu/intel/slot_1/l2_cache.c | 6 +++--- src/cpu/samsung/exynos5250/clk.h | 4 ++-- src/cpu/samsung/exynos5250/clock.c | 8 ++++---- src/cpu/samsung/exynos5250/cpu.c | 2 +- src/cpu/samsung/exynos5250/dmc.h | 2 +- src/cpu/samsung/exynos5250/dmc_common.c | 6 +++--- src/cpu/samsung/exynos5250/dmc_init_ddr3.c | 6 +++--- src/cpu/samsung/exynos5250/dp-core.h | 8 ++++---- src/cpu/samsung/exynos5250/dp-reg.c | 4 ++-- src/cpu/samsung/exynos5250/fimd.h | 4 ++-- src/cpu/samsung/exynos5250/pinmux.c | 2 +- src/cpu/samsung/exynos5250/setup.h | 4 ++-- src/cpu/samsung/exynos5250/spi.c | 4 ++-- src/cpu/samsung/exynos5250/tmu.c | 4 ++-- src/cpu/samsung/exynos5250/tmu.h | 2 +- src/cpu/samsung/exynos5250/uart.c | 4 ++-- src/cpu/ti/am335x/uart.c | 2 +- src/cpu/ti/am335x/uart.h | 4 ++-- src/cpu/via/nano/update_ucode.c | 4 ++-- src/cpu/via/nano/update_ucode.h | 4 ++-- src/cpu/x86/car.c | 2 +- src/cpu/x86/lapic/lapic_cpu_init.c | 2 +- src/cpu/x86/mtrr/earlymtrr.c | 4 ++-- src/cpu/x86/mtrr/mtrr.c | 18 +++++++++--------- src/cpu/x86/smm/smm_module_loader.c | 14 +++++++------- 44 files changed, 102 insertions(+), 102 deletions(-) diff --git a/src/cpu/amd/car/post_cache_as_ram.c b/src/cpu/amd/car/post_cache_as_ram.c index 68e7c09ad3..18c278e41a 100644 --- a/src/cpu/amd/car/post_cache_as_ram.c +++ b/src/cpu/amd/car/post_cache_as_ram.c @@ -88,7 +88,7 @@ static void post_cache_as_ram(void) #endif #if 1 { - /* Check value of esp to verify if we have enough rom for stack in Cache as RAM */ + /* Check value of esp to verify if we have enough room for stack in Cache as RAM */ unsigned v_esp; __asm__ volatile ( "movl %%esp, %0\n\t" @@ -123,7 +123,7 @@ static void post_cache_as_ram(void) /* set new esp */ /* before CONFIG_RAMBASE */ "subl %0, %%esp\n\t" ::"a"( (CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE)- (CONFIG_RAMTOP) ) - /* discard all registers (eax is used for %0), so gcc redo everything + /* discard all registers (eax is used for %0), so gcc redoes everything after the stack is moved */ : "cc", "memory", "%ebx", "%ecx", "%edx", "%esi", "%edi", "%ebp" ); diff --git a/src/cpu/amd/dualcore/amd_sibling.c b/src/cpu/amd/dualcore/amd_sibling.c index 13b9e378f3..b3df0a36e7 100644 --- a/src/cpu/amd/dualcore/amd_sibling.c +++ b/src/cpu/amd/dualcore/amd_sibling.c @@ -91,10 +91,10 @@ unsigned get_apicid_base(unsigned ioapic_num) } #endif - //contruct apicid_base + //Construct apicid_base if((!disable_siblings) && (siblings>0) ) { - /* for 8 way dual core, we will used up apicid 16:16, actualy 16 is not allowed by current kernel + /* for 8 way dual core, we will used up apicid 16:16, actually 16 is not allowed by current kernel and the kernel will try to get one that is small than 16 to make io apic work. I don't know when the kernel can support 256 apic id. (APIC_EXT_ID is enabled) */ diff --git a/src/cpu/amd/geode_gx2/cpubug.c b/src/cpu/amd/geode_gx2/cpubug.c index 54d7e0e8d2..eddc92408e 100644 --- a/src/cpu/amd/geode_gx2/cpubug.c +++ b/src/cpu/amd/geode_gx2/cpubug.c @@ -163,7 +163,7 @@ static void eng2900(void) * clocks when CPU is snooped. Because setting XSTATE to 0 * overrides any other XSTATE action, the code will always * stall for 4 GeodeLink clocks after a snoop request goes - * away even if it occured a clock or two later than a + * away even if it occurred a clock or two later than a * different snoop; the stall signal will never 'glitch high' * for only one or two CPU clocks with this code. */ @@ -201,7 +201,7 @@ static void eng2900(void) msr.lo = 0x30000; wrmsr(MSR_GLCP + 0x0073, msr); - /* Writing action number 5: STALL_CPU_PIPE when exitting idle + /* Writing action number 5: STALL_CPU_PIPE when exiting idle state or not in idle state */ msr.hi = 0; msr.lo = 0x00430000; @@ -293,7 +293,7 @@ static void bug118339(void) * * PBZ 3659: * The MC reordered transactions incorrectly and breaks coherency. - * Disable reording and take a potential performance hit. + * Disable reordering and take a potential performance hit. * This is safe to do here and not in MC init since there is nothing * to maintain coherency with and the cache is not enabled yet. */ diff --git a/src/cpu/amd/geode_gx2/cpureginit.c b/src/cpu/amd/geode_gx2/cpureginit.c index 0fc852d531..e0ecd62722 100644 --- a/src/cpu/amd/geode_gx2/cpureginit.c +++ b/src/cpu/amd/geode_gx2/cpureginit.c @@ -15,7 +15,7 @@ void cpuRegInit (void) /* Set up GLCP to grab BTM data. */ msrnum = GLCP_DBGOUT; /* GLCP_DBGOUT MSR */ msr.hi = 0x0; - msr.lo = 0x08; /* reset value (SCOPE_SEL = 0) causes FIFO toshift out, */ + msr.lo = 0x08; /* reset value (SCOPE_SEL = 0) causes FIFO to shift out, */ wrmsr(msrnum, msr); /* exchange it to anything else to prevent this */ /* Turn off debug clock */ @@ -119,7 +119,7 @@ void cpuRegInit (void) wrmsr(msrnum, msr); } -/* FPU impercise exceptions bit */ +/* FPU imprecise exceptions bit */ { msrnum = CPU_FPU_MSR_MODE; msr = rdmsr(msrnum); diff --git a/src/cpu/amd/geode_lx/cpubug.c b/src/cpu/amd/geode_lx/cpubug.c index 4110454566..ebadec7f7a 100644 --- a/src/cpu/amd/geode_lx/cpubug.c +++ b/src/cpu/amd/geode_lx/cpubug.c @@ -67,7 +67,7 @@ static void pcideadlock(void) /***/ /** PBZ 3659:*/ /** The MC reordered transactions incorrectly and breaks coherency.*/ -/** Disable reording and take a potential performance hit.*/ +/** Disable reordering and take a potential performance hit.*/ /** This is safe to do here and not in MC init since there is nothing*/ /** to maintain coherency with and the cache is not enabled yet.*/ /***/ diff --git a/src/cpu/amd/model_10xxx/defaults.h b/src/cpu/amd/model_10xxx/defaults.h index f7b8b2f9e1..3d33dda029 100644 --- a/src/cpu/amd/model_10xxx/defaults.h +++ b/src/cpu/amd/model_10xxx/defaults.h @@ -54,7 +54,7 @@ static const struct { { DC_CFG, AMD_DR_Bx, AMD_PTYPE_SVR, 0x00000000, 0x00000000, - 0x00000000, 0x00000C00 }, /* Errata 326 */ + 0x00000000, 0x00000C00 }, /* Erratum 326 */ { NB_CFG, AMD_FAM10_ALL, AMD_PTYPE_DC | AMD_PTYPE_MC, 0x00000000, 1 << 22, diff --git a/src/cpu/amd/model_10xxx/fidvid.c b/src/cpu/amd/model_10xxx/fidvid.c index ebe44dd76a..4297c90460 100644 --- a/src/cpu/amd/model_10xxx/fidvid.c +++ b/src/cpu/amd/model_10xxx/fidvid.c @@ -68,7 +68,7 @@ Fam10 Bios and Kernel Development Guide #31116, rev 3.48, April 22, 2010 9.- TODO Requires information on current delivery capability (depends on mainboard and maybe power supply ?). One might use a config - option with the maximum number of Ampers that the board can deliver to CPU. + option with the maximum number of Amperes that the board can deliver to CPU. 10.- [Multiprocessor] TODO 2.4.2.12 [Uniprocessor] FIXME ? We call setPStateMaxVal() in init_fidvid_stage2, @@ -79,7 +79,7 @@ Fam10 Bios and Kernel Development Guide #31116, rev 3.48, April 22, 2010 11.- finalPstateChange() from init_fidvid_Stage2 (BKDG says just "may", anyway) 12.- generate ACPI for p-states. FIXME - Needs more assesment. There's some kind of fixed support that + Needs more assessment. There's some kind of fixed support that does not seem to depend on CPU revision or actual MSRC001_00[68:64] as BKDG apparently requires. http://www.coreboot.org/ACPI#CPU_Power_Management @@ -935,7 +935,7 @@ static void fixPsNbVidAfterWR(u32 newNbVid, u8 NbVidUpdatedAll,u8 pviMode) static void finalPstateChange(void) { - /* Enble P0 on all cores for best performance. + /* Enable P0 on all cores for best performance. * Linux can slow them down later if need be. * It is safe since they will be in C1 halt * most of the time anyway. diff --git a/src/cpu/amd/model_10xxx/init_cpus.c b/src/cpu/amd/model_10xxx/init_cpus.c index 3d5ddcfb35..eb047b8db2 100644 --- a/src/cpu/amd/model_10xxx/init_cpus.c +++ b/src/cpu/amd/model_10xxx/init_cpus.c @@ -424,7 +424,7 @@ static void start_node(u8 node) /** * static void setup_remote_node(u32 node) * - * Copy the BSP Adress Map to each AP. + * Copy the BSP Address Map to each AP. */ static void setup_remote_node(u8 node) { diff --git a/src/cpu/amd/model_fxx/fidvid.c b/src/cpu/amd/model_fxx/fidvid.c index 06ff636659..e68611bca8 100644 --- a/src/cpu/amd/model_fxx/fidvid.c +++ b/src/cpu/amd/model_fxx/fidvid.c @@ -496,7 +496,7 @@ static void init_fidvid_bsp_stage2(unsigned ap_apicid, void *gp) continue; if ((readback & 0xff) == 2) { timeout = 0; - break; /* target ap is stage 2, it's FID has beed set */ + break; /* target ap is stage 2, its FID has been set */ } } @@ -603,7 +603,7 @@ static void init_fidvid_bsp(unsigned bsp_apicid) /* For all APs ( We know the APIC ID of all AP even the APIC ID is lifted) * send signal to the AP it could change it's fid/vid */ - /* remote read singnal from AP that AP is done */ + /* remote read signal from AP that AP is done */ fv.common_fidvid &= 0xffff00; diff --git a/src/cpu/amd/model_fxx/model_fxx_init.c b/src/cpu/amd/model_fxx/model_fxx_init.c index a18b982bdb..42c6f95119 100644 --- a/src/cpu/amd/model_fxx/model_fxx_init.c +++ b/src/cpu/amd/model_fxx/model_fxx_init.c @@ -509,7 +509,7 @@ static void model_fxx_init(device_t dev) id = get_node_core_id(read_nb_cfg_54()); // pre e0 nb_cfg_54 can not be set - /* Is this a bad location? In particular can another node prefecth + /* Is this a bad location? In particular can another node prefetch * data from this node before we have initialized it? */ if (id.coreid == 0) diff --git a/src/cpu/amd/model_fxx/powernow_acpi.c b/src/cpu/amd/model_fxx/powernow_acpi.c index 820d4262e6..af1e24b094 100644 --- a/src/cpu/amd/model_fxx/powernow_acpi.c +++ b/src/cpu/amd/model_fxx/powernow_acpi.c @@ -75,7 +75,7 @@ static int write_pstates_for_core(u8 pstate_num, u16 *pstate_feq, u8 *pstate_vid #if CONFIG_K8_REV_F_SUPPORT /* -* Details about this algorithm , refert to BDKG 10.5.1 +* Details about this algorithm , refer to BDKG 10.5.1 * Two parts are included, the another is the DSDT reconstruction process */ @@ -202,7 +202,7 @@ static int pstates_algorithm(u32 pcontrol_blk, u8 plen, u8 onlyBSP) goto write_pstates; } - /* Get the multipier of the fid frequency */ + /* Get the multiplier of the fid frequency */ /* * Fid multiplier is always 100 revF and revG. */ @@ -316,7 +316,7 @@ static int pstates_algorithm(u32 pcontrol_blk, u8 plen, u8 onlyBSP) Pstate_num++; } - /* Constuct P[Min] State */ + /* Construct P[Min] State */ if (Max_fid == 0x2A && Max_vid != 0x0) { Pstate_fid[Pstate_num] = 0x2; Pstate_feq[Pstate_num] = diff --git a/src/cpu/amd/mtrr/amd_mtrr.c b/src/cpu/amd/mtrr/amd_mtrr.c index 2f3e6e340f..033ec53d3a 100644 --- a/src/cpu/amd/mtrr/amd_mtrr.c +++ b/src/cpu/amd/mtrr/amd_mtrr.c @@ -128,10 +128,10 @@ void amd_setup_mtrrs(void) } /* Now that I have mapped what is memory and what is not - * Setup the mtrrs so we can cache the memory. + * Set up the mtrrs so we can cache the memory. */ - // Rev. F K8 supports has SYSCFG_MSR_TOM2WB and dont need + // Rev. F K8 supports has SYSCFG_MSR_TOM2WB and doesn't need // variable MTRR to span memory above 4GB // Lower revisions K8 need variable MTRR over 4GB x86_setup_var_mtrrs(address_bits, has_tom2wb ? 0 : 1); diff --git a/src/cpu/amd/quadcore/amd_sibling.c b/src/cpu/amd/quadcore/amd_sibling.c index e0d173dd79..d653a85d5a 100644 --- a/src/cpu/amd/quadcore/amd_sibling.c +++ b/src/cpu/amd/quadcore/amd_sibling.c @@ -95,10 +95,10 @@ u32 get_apicid_base(u32 ioapic_num) nb_cfg_54 = read_nb_cfg_54(); - //contruct apicid_base + //Construct apicid_base if((!disable_siblings) && (siblings>0) ) { - /* for 8 way dual core, we will used up apicid 16:16, actualy + /* for 8 way dual core, we will used up apicid 16:16, actually 16 is not allowed by current kernel and the kernel will try to get one that is small than 16 to make io apic work. I don't know when the kernel can support 256 apic id. diff --git a/src/cpu/intel/haswell/haswell.h b/src/cpu/intel/haswell/haswell.h index 4a739a9e30..ac082b86eb 100644 --- a/src/cpu/intel/haswell/haswell.h +++ b/src/cpu/intel/haswell/haswell.h @@ -169,7 +169,7 @@ void smm_initiate_relocation(void); void smm_initiate_relocation_parallel(void); struct bus; void bsp_init_and_start_aps(struct bus *cpu_bus); -/* Returns 0 on succes. < 0 on failure. */ +/* Returns 0 on success. < 0 on failure. */ int setup_ap_init(struct bus *cpu_bus, int *max_cpus, const void *microcode_patch); /* Returns 0 on success, < 0 on failure. */ diff --git a/src/cpu/intel/haswell/haswell_init.c b/src/cpu/intel/haswell/haswell_init.c index 056b289bb2..85f6afd031 100644 --- a/src/cpu/intel/haswell/haswell_init.c +++ b/src/cpu/intel/haswell/haswell_init.c @@ -39,7 +39,7 @@ #include "chip.h" /* - * List of suported C-states in this processor + * List of supported C-states in this processor * * Latencies are typical worst-case package exit time in uS * taken from the SandyBridge BIOS specification. @@ -324,7 +324,7 @@ static void configure_thermal_target(void) return; conf = lapic->chip_info; - /* Set TCC activaiton offset if supported */ + /* Set TCC activation offset if supported */ msr = rdmsr(MSR_PLATFORM_INFO); if ((msr.lo & (1 << 30)) && conf->tcc_offset) { msr = rdmsr(MSR_TEMPERATURE_TARGET); @@ -508,8 +508,8 @@ void bsp_init_and_start_aps(struct bus *cpu_bus) int num_aps; const void *microcode_patch; - /* Perform any necesarry BSP initialization before APs are brought up. - * This call alos allows the BSP to prepare for any secondary effects + /* Perform any necessary BSP initialization before APs are brought up. + * This call also allows the BSP to prepare for any secondary effects * from calling cpu_initialize() such as smm_init(). */ bsp_init_before_ap_bringup(cpu_bus); @@ -529,7 +529,7 @@ void bsp_init_and_start_aps(struct bus *cpu_bus) } if (smm_initialize()) { - printk(BIOS_CRIT, "SMM Initialiazation failed...\n"); + printk(BIOS_CRIT, "SMM Initialization failed...\n"); return; } diff --git a/src/cpu/intel/haswell/mp_init.c b/src/cpu/intel/haswell/mp_init.c index 1358418557..51130a56a3 100644 --- a/src/cpu/intel/haswell/mp_init.c +++ b/src/cpu/intel/haswell/mp_init.c @@ -78,7 +78,7 @@ static device_t cpu_devs[CONFIG_MAX_CPUS]; static atomic_t num_aps; /* Number of APs that have relocated their SMM handler. */ static atomic_t num_aps_relocated_smm; -/* Barrier to stop APs from performing SMM relcoation. */ +/* Barrier to stop APs from performing SMM relocation. */ static int smm_relocation_barrier_begin __attribute__ ((aligned (64))); /* Determine if hyperthreading is disabled. */ int ht_disabled; @@ -145,7 +145,7 @@ void release_aps_for_smm_relocation(int do_parallel) /* The mtrr code sets up ROM caching on the BSP, but not the others. However, * the boot loader payload disables this. In order for Linux not to complain - * ensure the caching is disabled for tha APs before going to sleep. */ + * ensure the caching is disabled for the APs before going to sleep. */ static void cleanup_rom_caching(void) { x86_mtrr_disable_rom_caching(); @@ -178,7 +178,7 @@ static void asmlinkage ap_init(unsigned int cpu, void *microcode_ptr) ap_initiate_smm_relocation(); - /* Indicate that SMM relocation has occured on this thread. */ + /* Indicate that SMM relocation has occurred on this thread. */ atomic_inc(&num_aps_relocated_smm); /* After SMM relocation a 2nd microcode load is required. */ @@ -401,7 +401,7 @@ static int allocate_cpu_devices(struct bus *cpu_bus, int *total_hw_threads) /* Allocate the new cpu device structure */ new = alloc_find_dev(cpu_bus, &cpu_path); if (new == NULL) { - printk(BIOS_CRIT, "Could not allocte cpu device\n"); + printk(BIOS_CRIT, "Could not allocate cpu device\n"); max_cpus--; } cpu_devs[i] = new; diff --git a/src/cpu/intel/haswell/smmrelocate.c b/src/cpu/intel/haswell/smmrelocate.c index 4fe6489be2..3f4f45ab4f 100644 --- a/src/cpu/intel/haswell/smmrelocate.c +++ b/src/cpu/intel/haswell/smmrelocate.c @@ -348,7 +348,7 @@ static void setup_ied_area(struct smm_relocation_params *params) memset(ied_base + (1 << 20), 0, (32 << 10)); /* According to the BWG MP init section 2MiB of memory at IEDBASE + - * 2MiB should be zeroed as well. However, I suspect what is inteneded + * 2MiB should be zeroed as well. However, I suspect what is intended * is to clear the memory covered by EMRR. TODO(adurbin): figure out if * this is really required. */ //memset(ied_base + (2 << 20), 0, (2 << 20)); } diff --git a/src/cpu/intel/model_2065x/model_2065x_init.c b/src/cpu/intel/model_2065x/model_2065x_init.c index ab4db59e6d..4c88e4412f 100644 --- a/src/cpu/intel/model_2065x/model_2065x_init.c +++ b/src/cpu/intel/model_2065x/model_2065x_init.c @@ -39,7 +39,7 @@ #include "chip.h" /* - * List of suported C-states in this processor + * List of supported C-states in this processor * * Latencies are typical worst-case package exit time in uS * taken from the SandyBridge BIOS specification. @@ -249,7 +249,7 @@ static void configure_thermal_target(void) return; conf = lapic->chip_info; - /* Set TCC activaiton offset if supported */ + /* Set TCC activation offset if supported */ msr = rdmsr(MSR_PLATFORM_INFO); if ((msr.lo & (1 << 30)) && conf->tcc_offset) { msr = rdmsr(MSR_TEMPERATURE_TARGET); diff --git a/src/cpu/intel/model_206ax/model_206ax_init.c b/src/cpu/intel/model_206ax/model_206ax_init.c index fa974e53cd..60288010da 100644 --- a/src/cpu/intel/model_206ax/model_206ax_init.c +++ b/src/cpu/intel/model_206ax/model_206ax_init.c @@ -39,7 +39,7 @@ #include "chip.h" /* - * List of suported C-states in this processor + * List of supported C-states in this processor * * Latencies are typical worst-case package exit time in uS * taken from the SandyBridge BIOS specification. @@ -374,7 +374,7 @@ static void configure_thermal_target(void) return; conf = lapic->chip_info; - /* Set TCC activaiton offset if supported */ + /* Set TCC activation offset if supported */ msr = rdmsr(MSR_PLATFORM_INFO); if ((msr.lo & (1 << 30)) && conf->tcc_offset) { msr = rdmsr(MSR_TEMPERATURE_TARGET); diff --git a/src/cpu/intel/slot_1/l2_cache.c b/src/cpu/intel/slot_1/l2_cache.c index eca0c89e3b..a974d24c3d 100644 --- a/src/cpu/intel/slot_1/l2_cache.c +++ b/src/cpu/intel/slot_1/l2_cache.c @@ -34,7 +34,7 @@ */ /* This code is ported from coreboot v1. - * The L2 cache initalization sequence here only apply to SECC/SECC2 P6 family + * The L2 cache initialization sequence here only apply to SECC/SECC2 P6 family * CPUs with Klamath (63x), Deschutes (65x) and Katmai (67x) cores. * It is not required for Coppermine (68x) and Tualatin (6bx) cores. * It is currently not known if Celerons with Mendocino (66x) core require the @@ -295,7 +295,7 @@ int write_l2(u32 address, u32 data) // data1 = ffffffff // data2 = 000000dc // address = 00aaaaaa - // Final address signalled: + // Final address signaled: // 000fffff fff000c0 000dcaaa aaa00000 data1 = data & 0xff; data1 = data1 << 21; @@ -343,7 +343,7 @@ int test_l2_address_alias(u32 address1, u32 address2, /* Calculates the L2 cache size. * - * Reference: Intel(R) 64 and IA-32 Architectures Software Developer’s Manual + * Reference: Intel(R) 64 and IA-32 Architectures Software Developer�s Manual * Volume 3B: System Programming Guide, Part 2, Intel pub. 253669, pg. B-172. * */ diff --git a/src/cpu/samsung/exynos5250/clk.h b/src/cpu/samsung/exynos5250/clk.h index ba8d960ca4..565cf2b255 100644 --- a/src/cpu/samsung/exynos5250/clk.h +++ b/src/cpu/samsung/exynos5250/clk.h @@ -72,7 +72,7 @@ unsigned long clock_get_periph_rate(enum periph_id peripheral); #define MCT_HZ 24000000 /* - * Set mshci controller instances clock drivder + * Set mshci controller instances clock divider * * @param enum periph_id instance of the mshci controller * @@ -521,7 +521,7 @@ struct exynos5_mct_regs { }; #define EXYNOS5_EPLLCON0_LOCKED_SHIFT 29 /* EPLL Locked bit position*/ -#define EPLL_SRC_CLOCK 24000000 /*24 MHz Cristal Input */ +#define EPLL_SRC_CLOCK 24000000 /*24 MHz Crystal Input */ #define TIMEOUT_EPLL_LOCK 1000 #define AUDIO_0_RATIO_MASK 0x0f diff --git a/src/cpu/samsung/exynos5250/clock.c b/src/cpu/samsung/exynos5250/clock.c index 78f0bd434d..390fae30f6 100644 --- a/src/cpu/samsung/exynos5250/clock.c +++ b/src/cpu/samsung/exynos5250/clock.c @@ -160,7 +160,7 @@ static struct clk_bit_info clk_bit_info[PERIPH_ID_COUNT] = { {24, 1, 20, -1}, /* PERIPH_ID_SATA */ }; -/* Epll Clock division values to achive different frequency output */ +/* Epll Clock division values to achieve different frequency output */ static struct st_epll_con_val epll_div[] = { { 192000000, 0, 48, 3, 1, 0 }, { 180000000, 0, 45, 3, 1, 0 }, @@ -405,7 +405,7 @@ void clock_ll_set_pre_ratio(enum periph_id periph_id, unsigned divisor) u32 *reg; /* - * For now we only handle a very small subset of peipherals here. + * For now we only handle a very small subset of peripherals here. * Others will need to (and do) mangle the clock registers * themselves, At some point it is hoped that this function can work * from a table or calculated register offset / mask. For now this @@ -636,7 +636,7 @@ int clock_epll_set_rate(unsigned long rate) epll_con |= epll_div[i].s_div << EPLL_CON0_SDIV_SHIFT; /* - * Required period ( in cycles) to genarate a stable clock output. + * Required period ( in cycles) to generate a stable clock output. * The maximum clock time can be up to 3000 * PDIV cycles of PLLs * frequency input (as per spec) */ @@ -675,7 +675,7 @@ int clock_set_i2s_clk_prescaler(unsigned int src_frq, unsigned int dst_frq) unsigned int div ; if ((dst_frq == 0) || (src_frq == 0)) { - printk(BIOS_DEBUG, "%s: Invalid requency input for prescaler\n", __func__); + printk(BIOS_DEBUG, "%s: Invalid frequency input for prescaler\n", __func__); printk(BIOS_DEBUG, "src frq = %d des frq = %d ", src_frq, dst_frq); return -1; } diff --git a/src/cpu/samsung/exynos5250/cpu.c b/src/cpu/samsung/exynos5250/cpu.c index 96e7dc361a..61f937b378 100644 --- a/src/cpu/samsung/exynos5250/cpu.c +++ b/src/cpu/samsung/exynos5250/cpu.c @@ -107,7 +107,7 @@ static void exynos_displayport_init(device_t dev) * * Note: We may want to do something clever to ensure the framebuffer * region is aligned such that we don't change dcache policy for other - * stuff inadvertantly. + * stuff inadvertently. */ uint32_t lower = ALIGN_DOWN(lcdbase, MiB); uint32_t upper = ALIGN_UP(lcdbase + fb_size, MiB); diff --git a/src/cpu/samsung/exynos5250/dmc.h b/src/cpu/samsung/exynos5250/dmc.h index d676aa7463..acd0abbcf1 100644 --- a/src/cpu/samsung/exynos5250/dmc.h +++ b/src/cpu/samsung/exynos5250/dmc.h @@ -328,7 +328,7 @@ struct mem_timings { uint8_t chips_per_channel; /* number of chips per channel */ uint8_t chips_to_configure; /* number of chips to configure */ uint8_t send_zq_init; /* 1 to send this command */ - unsigned int impedance; /* drive strength impedeance */ + unsigned int impedance; /* drive strength impedance */ uint8_t gate_leveling_enable; /* check gate leveling is enabled */ }; diff --git a/src/cpu/samsung/exynos5250/dmc_common.c b/src/cpu/samsung/exynos5250/dmc_common.c index 55388ac162..b506853df8 100644 --- a/src/cpu/samsung/exynos5250/dmc_common.c +++ b/src/cpu/samsung/exynos5250/dmc_common.c @@ -64,7 +64,7 @@ int dmc_config_zq(struct mem_timings *mem, val &= ~ZQ_MANUAL_STR; /* - * Since we are manaully calibrating the ZQ values, + * Since we are manually calibrating the ZQ values, * we are looping for the ZQ_init to complete. */ i = ZQ_INIT_TIMEOUT; @@ -97,12 +97,12 @@ void update_reset_dll(struct exynos5_dmc *dmc, enum ddr_mode mode) writel(val, &dmc->phycontrol0); } - /* Update DLL Information: Force DLL Resyncronization */ + /* Update DLL Information: Force DLL Resynchronization */ val = readl(&dmc->phycontrol0); val |= FP_RSYNC; writel(val, &dmc->phycontrol0); - /* Reset Force DLL Resyncronization */ + /* Reset Force DLL Resynchronization */ val = readl(&dmc->phycontrol0); val &= ~FP_RSYNC; writel(val, &dmc->phycontrol0); diff --git a/src/cpu/samsung/exynos5250/dmc_init_ddr3.c b/src/cpu/samsung/exynos5250/dmc_init_ddr3.c index cb5c61389f..554f4c2dc4 100644 --- a/src/cpu/samsung/exynos5250/dmc_init_ddr3.c +++ b/src/cpu/samsung/exynos5250/dmc_init_ddr3.c @@ -139,9 +139,9 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size, writel(mem->concontrol | (mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT), &dmc->concontrol); - /* Memory Channel Inteleaving Size */ + /* Memory Channel Interleaving Size */ printk(BIOS_SPEW, "ddr3_mem_ctrl_init: " - "Memory Channel Inteleaving Size\n"); + "Memory Channel Interleaving Size\n"); writel(mem->iv_size, &dmc->ivcontrol); /* Set DMC MEMCONTROL register */ @@ -161,7 +161,7 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size, /* Power Down mode Configuration */ printk(BIOS_SPEW, "ddr3_mem_ctrl_init: " - "Power Down mode Configuraation\n"); + "Power Down mode Configuration\n"); writel(mem->dpwrdn_cyc << PWRDNCONFIG_DPWRDN_CYC_SHIFT | mem->dsref_cyc << PWRDNCONFIG_DSREF_CYC_SHIFT, &dmc->pwrdnconfig); diff --git a/src/cpu/samsung/exynos5250/dp-core.h b/src/cpu/samsung/exynos5250/dp-core.h index 73f4638599..ab7e7e4b32 100644 --- a/src/cpu/samsung/exynos5250/dp-core.h +++ b/src/cpu/samsung/exynos5250/dp-core.h @@ -29,7 +29,7 @@ #define MAX_CR_LOOP 5 #define MAX_EQ_LOOP 4 -/* Link tare type */ +/* Link rate type */ enum link_rate { LINK_RATE_1_62GBPS = 0x06, LINK_RATE_2_70GBPS = 0x0a @@ -126,7 +126,7 @@ struct s5p_dp_device { */ void s5p_dp_reset(struct s5p_dp_device *dp); /* - * Initialize DP to recieve video stream + * Initialize DP to receive video stream * * param dp pointer to main s5p-dp structure */ @@ -214,8 +214,8 @@ int s5p_dp_is_slave_video_stream_clock_on(struct s5p_dp_device *dp); * * param dp pointer to main s5p-dp structure * param type clock_recovery_m_value_type - * param m_value to caluculate m_vid value - * param n_value to caluculate n_vid value + * param m_value to calculate m_vid value + * param n_value to calculate n_vid value */ void s5p_dp_set_video_cr_mn(struct s5p_dp_device *dp, enum clock_recovery_m_value_type type, diff --git a/src/cpu/samsung/exynos5250/dp-reg.c b/src/cpu/samsung/exynos5250/dp-reg.c index eb53356449..ac4208d159 100644 --- a/src/cpu/samsung/exynos5250/dp-reg.c +++ b/src/cpu/samsung/exynos5250/dp-reg.c @@ -91,7 +91,7 @@ void s5p_dp_reset(struct s5p_dp_device *dp) /* Set interrupt pin assertion polarity as high */ writel(INT_POL0 | INT_POL1, &base->int_ctl); - /* Clear pending regisers */ + /* Clear pending registers */ writel(0xff, &base->common_int_sta_1); writel(0x4f, &base->common_int_sta_2); writel(0xe0, &base->common_int_sta_3); @@ -156,7 +156,7 @@ void s5p_dp_init_aux(struct s5p_dp_device *dp) u32 reg; struct exynos5_dp *base = dp->base; - /* Clear inerrupts related to AUX channel */ + /* Clear interrupts related to AUX channel */ reg = RPLY_RECEIV | AUX_ERR; writel(reg, &base->dp_int_sta); diff --git a/src/cpu/samsung/exynos5250/fimd.h b/src/cpu/samsung/exynos5250/fimd.h index 71d1785568..f3dea37a1b 100644 --- a/src/cpu/samsung/exynos5250/fimd.h +++ b/src/cpu/samsung/exynos5250/fimd.h @@ -86,11 +86,11 @@ struct exynos5_fimd_panel { unsigned int upper_margin; /* Vertical Backporch */ unsigned int lower_margin; /* Vertical frontporch */ unsigned int vsync; /* Vertical Sync Pulse Width */ - unsigned int left_margin; /* Horizantal Backporch */ + unsigned int left_margin; /* Horizontal Backporch */ unsigned int right_margin; /* Horizontal Frontporch */ unsigned int hsync; /* Horizontal Sync Pulse Width */ unsigned int xres; /* X Resolution */ - unsigned int yres; /* Y Resopultion */ + unsigned int yres; /* Y Resolution */ }; /* LCDIF Register Map */ diff --git a/src/cpu/samsung/exynos5250/pinmux.c b/src/cpu/samsung/exynos5250/pinmux.c index 1c72353aa1..ab1b25ec3b 100644 --- a/src/cpu/samsung/exynos5250/pinmux.c +++ b/src/cpu/samsung/exynos5250/pinmux.c @@ -94,7 +94,7 @@ void exynos_pinmux_sdmmc2(void) void exynos_pinmux_sdmmc3(void) { /* - * TODO: Need to add defintions for GPC4 before + * TODO: Need to add definitions for GPC4 before * enabling this. */ printk(BIOS_DEBUG, "SDMMC3 not supported yet"); diff --git a/src/cpu/samsung/exynos5250/setup.h b/src/cpu/samsung/exynos5250/setup.h index 942a3f1ab5..9f10786ada 100644 --- a/src/cpu/samsung/exynos5250/setup.h +++ b/src/cpu/samsung/exynos5250/setup.h @@ -661,7 +661,7 @@ struct exynos5_phy_control; #define MEM_TERM_EN (1 << 31) /* Termination enable for memory */ #define PHY_TERM_EN (1 << 30) /* Termination enable for PHY */ #define DMC_CTRL_SHGATE (1 << 29) /* Duration of DQS gating signal */ -#define FP_RSYNC (1 << 3) /* Force DLL resyncronization */ +#define FP_RSYNC (1 << 3) /* Force DLL resynchronization */ /* Driver strength for CK, CKE, CS & CA */ #define IMP_OUTPUT_DRV_40_OHM 0x5 @@ -676,7 +676,7 @@ struct exynos5_phy_control; struct mem_timings; -/* Errors that we can encourter in low-level setup */ +/* Errors that we can encounter in low-level setup */ enum { SETUP_ERR_OK, SETUP_ERR_RDLV_COMPLETE_TIMEOUT = -1, diff --git a/src/cpu/samsung/exynos5250/spi.c b/src/cpu/samsung/exynos5250/spi.c index 642ae23bb6..1c365dc5ca 100644 --- a/src/cpu/samsung/exynos5250/spi.c +++ b/src/cpu/samsung/exynos5250/spi.c @@ -42,7 +42,7 @@ static void exynos_spi_rx_tx(struct exynos_spi *regs, int todo, unsigned int *rxp = (unsigned int *)(dinp + (i * (32 * 1024))); unsigned int out_bytes, in_bytes; - // TODO In currrent implementation, every read/write must be aligned to + // TODO In current implementation, every read/write must be aligned to // 4 bytes, otherwise you may get timeout or other unexpected results. ASSERT(todo % 4 == 0); @@ -90,7 +90,7 @@ int exynos_spi_open(struct exynos_spi *regs) SPI_MODE_CH_WIDTH_WORD | SPI_MODE_BUS_WIDTH_WORD); clrbits_le32(®s->ch_cfg, SPI_CH_CPOL_L); /* CPOL: active high */ - /* clear rx and tx channel if set priveously */ + /* clear rx and tx channel if set previously */ clrbits_le32(®s->ch_cfg, SPI_RX_CH_ON | SPI_TX_CH_ON); setbits_le32(®s->swap_cfg, diff --git a/src/cpu/samsung/exynos5250/tmu.c b/src/cpu/samsung/exynos5250/tmu.c index 5a871fd2ba..1b5e9c2b64 100644 --- a/src/cpu/samsung/exynos5250/tmu.c +++ b/src/cpu/samsung/exynos5250/tmu.c @@ -69,8 +69,8 @@ struct tmu_info exynos5250_tmu_info = { /* * After reading temperature code from register, compensating - * its value and calculating celsius temperatue, - * get current temperatue. + * its value and calculating celsius temperature, + * get current temperature. * * @return current temperature of the chip as sensed by TMU */ diff --git a/src/cpu/samsung/exynos5250/tmu.h b/src/cpu/samsung/exynos5250/tmu.h index 03eacd2595..bda4bd7dd8 100644 --- a/src/cpu/samsung/exynos5250/tmu.h +++ b/src/cpu/samsung/exynos5250/tmu.h @@ -65,7 +65,7 @@ enum tmu_status_t { TMU_STATUS_TRIPPED, }; -/* Tmeperature threshold values for various thermal events */ +/* Temperature threshold values for various thermal events */ struct temperature_params { /* minimum value in temperature code range */ unsigned int min_val; diff --git a/src/cpu/samsung/exynos5250/uart.c b/src/cpu/samsung/exynos5250/uart.c index 41dc709c97..dbf7202d35 100644 --- a/src/cpu/samsung/exynos5250/uart.c +++ b/src/cpu/samsung/exynos5250/uart.c @@ -37,7 +37,7 @@ static uint32_t base_port = CONFIG_CONSOLE_SERIAL_UART_ADDRESS; * The coefficient, used to calculate the baudrate on S5P UARTs is * calculated as * C = UBRDIV * 16 + number_of_set_bits_in_UDIVSLOT - * however, section 31.6.11 of the datasheet doesn't recomment using 1 for 1, + * however, section 31.6.11 of the datasheet doesn't recommend using 1 for 1, * 3 for 2, ... (2^n - 1) for n, instead, they suggest using these constants: */ static const int udivslot[] = { @@ -129,7 +129,7 @@ static int exynos5_uart_err_check(int op) /* * Read a single byte from the serial port. Returns 1 on success, 0 - * otherwise. When the function is succesfull, the character read is + * otherwise. When the function is successful, the character read is * written into its argument c. */ static unsigned char exynos5_uart_rx_byte(void) diff --git a/src/cpu/ti/am335x/uart.c b/src/cpu/ti/am335x/uart.c index 395ed866d9..bd2ff44044 100644 --- a/src/cpu/ti/am335x/uart.c +++ b/src/cpu/ti/am335x/uart.c @@ -147,7 +147,7 @@ static void am335x_uart_init_dev(void) /* * Read a single byte from the serial port. Returns 1 on success, 0 - * otherwise. When the function is succesfull, the character read is + * otherwise. When the function is successful, the character read is * written into its argument c. */ static unsigned char am335x_uart_rx_byte(void) diff --git a/src/cpu/ti/am335x/uart.h b/src/cpu/ti/am335x/uart.h index 56d4c51230..645cd43743 100644 --- a/src/cpu/ti/am335x/uart.h +++ b/src/cpu/ti/am335x/uart.h @@ -130,7 +130,7 @@ struct am335x_uart { uint8_t rsvd_0x36[2]; uint16_t blr; /* BOF control */ uint8_t rsvd_0x3a[2]; - uint16_t acreg; /* auxilliary control */ + uint16_t acreg; /* auxiliary control */ uint8_t rsvd_0x3e[2]; /* 0x40 */ @@ -139,7 +139,7 @@ struct am335x_uart { uint16_t ssr; /* supplementary status */ uint8_t rsvd_0x46[2]; - uint16_t eblr; /* BOF length (operatoinal mode only) */ + uint16_t eblr; /* BOF length (operational mode only) */ uint8_t rsvd_0x4a[6]; /* 0x50 */ diff --git a/src/cpu/via/nano/update_ucode.c b/src/cpu/via/nano/update_ucode.c index d5757f87a7..7471928641 100644 --- a/src/cpu/via/nano/update_ucode.c +++ b/src/cpu/via/nano/update_ucode.c @@ -37,7 +37,7 @@ static ucode_update_status nano_apply_ucode(const nano_ucode_header *ucode) msr.hi = 0; wrmsr(MSR_IA32_BIOS_UPDT_TRIG, msr); - /* Let's see if we updated succesfully */ + /* Let's see if we updated successfully */ msr = rdmsr(MSR_UCODE_UPDATE_STATUS); return msr.lo & 0x07; @@ -80,7 +80,7 @@ static void nano_print_ucode_status(ucode_update_status stat) switch(stat) { case UCODE_UPDATE_SUCCESS: - printk(BIOS_INFO, "Microcode update succesful.\n"); + printk(BIOS_INFO, "Microcode update successful.\n"); break; case UCODE_UPDATE_FAIL: printk(BIOS_ALERT, "Microcode update failed, bad environment." diff --git a/src/cpu/via/nano/update_ucode.h b/src/cpu/via/nano/update_ucode.h index 6a22d183a7..ae58fb228d 100644 --- a/src/cpu/via/nano/update_ucode.h +++ b/src/cpu/via/nano/update_ucode.h @@ -56,11 +56,11 @@ typedef struct { u32 applicable_fms; /* Fam/model/stepping to which ucode applies */ u32 checksum; /* Two's complement checksum of ucode+header */ u32 loader_revision; /* Revision of hardware ucode update loader*/ - u32 rfu_1; /* Reservod for future use */ + u32 rfu_1; /* Reserved for future use */ u32 payload_size; /* Size of the ucode payload only */ u32 total_size; /* Size of the ucode, including header */ char name[8]; /* ASCII string of ucode filename */ - u32 rfu_2; /* Reservod for future use */ + u32 rfu_2; /* Reserved for future use */ /* First double-word of the ucode payload * Its address represents the beginning of the ucode update we need to * send to the CPU */ diff --git a/src/cpu/x86/car.c b/src/cpu/x86/car.c index 88f280796b..87fa98b488 100644 --- a/src/cpu/x86/car.c +++ b/src/cpu/x86/car.c @@ -33,7 +33,7 @@ extern char _car_data_end[]; /* * The car_migrated global variable determines if the cache-as-ram space has - * been migrated to real RAM. It does this by asumming the following things: + * been migrated to real RAM. It does this by assuming the following things: * 1. cache-as-ram space is zero'd out once it is set up. * 2. Either the cache-as-ram space is memory-backed after getting torn down * or the space returns 0xff's for each byte read. diff --git a/src/cpu/x86/lapic/lapic_cpu_init.c b/src/cpu/x86/lapic/lapic_cpu_init.c index fbc8aa4e45..a3bab4658a 100644 --- a/src/cpu/x86/lapic/lapic_cpu_init.c +++ b/src/cpu/x86/lapic/lapic_cpu_init.c @@ -40,7 +40,7 @@ * will return 0, meaning no CPU. * * We actually handling that case by noting which cpus startup - * and not telling anyone about the ones that dont. + * and not telling anyone about the ones that don't. */ /* Start-UP IPI vector must be 4kB aligned and below 1MB. */ diff --git a/src/cpu/x86/mtrr/earlymtrr.c b/src/cpu/x86/mtrr/earlymtrr.c index 55dbd2f4a4..f16da279c6 100644 --- a/src/cpu/x86/mtrr/earlymtrr.c +++ b/src/cpu/x86/mtrr/earlymtrr.c @@ -32,7 +32,7 @@ static void cache_ramstage(void) const int addr_det = 0; /* the fixed and variable MTTRs are power-up with random values, - * clear them to MTRR_TYPE_UNCACHEABLE for safty. + * clear them to MTRR_TYPE_UNCACHEABLE for safety. */ static void do_early_mtrr_init(const unsigned long *mtrr_msrs) { @@ -43,7 +43,7 @@ static void do_early_mtrr_init(const unsigned long *mtrr_msrs) msr_t msr; const unsigned long *msr_addr; - /* Inialize all of the relevant msrs to 0 */ + /* Initialize all of the relevant msrs to 0 */ msr.lo = 0; msr.hi = 0; unsigned long msr_nr; diff --git a/src/cpu/x86/mtrr/mtrr.c b/src/cpu/x86/mtrr/mtrr.c index b69787bf4a..8f1c35ec6e 100644 --- a/src/cpu/x86/mtrr/mtrr.c +++ b/src/cpu/x86/mtrr/mtrr.c @@ -94,7 +94,7 @@ static inline unsigned int fms(unsigned int x) return r; } -/* fls: find least sigificant bit set */ +/* fls: find least significant bit set */ static inline unsigned int fls(unsigned int x) { int r; @@ -160,8 +160,8 @@ static struct memranges *get_physical_address_space(void) static struct memranges addr_space_storage; /* In order to handle some chipsets not being able to pre-determine - * uncacheable ranges, such as graphics memory, at resource inseration - * time remove unacheable regions from the cacheable ones. */ + * uncacheable ranges, such as graphics memory, at resource insertion + * time remove uncacheable regions from the cacheable ones. */ if (addr_space == NULL) { struct range_entry *r; unsigned long mask; @@ -216,7 +216,7 @@ static struct memranges *get_physical_address_space(void) } /* Fixed MTRR descriptor. This structure defines the step size and begin - * and end (exclusive) address covered by a set of fixe MTRR MSRs. + * and end (exclusive) address covered by a set of fixed MTRR MSRs. * It also describes the offset in byte intervals to store the calculated MTRR * type in an array. */ struct fixed_mtrr_desc { @@ -533,7 +533,7 @@ static void calc_var_mtrrs_with_hole(struct var_mtrr_state *var_state, struct range_entry *next; /* - * Determine MTRRs based on the following algoirthm for the given entry: + * Determine MTRRs based on the following algorithm for the given entry: * +------------------+ b2 = ALIGN_UP(end) * | 0 or more bytes | <-- hole is carved out between b1 and b2 * +------------------+ a2 = b1 = end @@ -571,7 +571,7 @@ static void calc_var_mtrrs_with_hole(struct var_mtrr_state *var_state, b1 = a2; - /* First check if a1 is >= 4GiB and the current etnry is the last + /* First check if a1 is >= 4GiB and the current entry is the last * entry. If so perform an optimization of covering a larger range * defined by the base address' alignment. */ if (a1 >= RANGE_4GB && next == NULL) { @@ -686,10 +686,10 @@ static int calc_var_mtrrs(struct memranges *addr_space, * 1. UC as default type with no holes at top of range. * 2. UC as default using holes at top of range. * 3. WB as default. - * The lowest count is then used as default after totalling all - * MTRRs. Note that the optimal algoirthm for UC default is marked in + * The lowest count is then used as default after totaling all + * MTRRs. Note that the optimal algorithm for UC default is marked in * the tag of each range regardless of final decision. UC takes - * precedence in the MTRR archiecture. Therefore, only holes can be + * precedence in the MTRR architecture. Therefore, only holes can be * used when the type of the region is MTRR_TYPE_WRBACK with * MTRR_TYPE_UNCACHEABLE as the default type. */ diff --git a/src/cpu/x86/smm/smm_module_loader.c b/src/cpu/x86/smm/smm_module_loader.c index 5eb4c5a0a2..478ae8c10a 100644 --- a/src/cpu/x86/smm/smm_module_loader.c +++ b/src/cpu/x86/smm/smm_module_loader.c @@ -24,16 +24,16 @@ #include /* - * Compoments that make up the SMRAM: + * Components that make up the SMRAM: * 1. Save state - the total save state memory used * 2. Stack - stacks for the CPUs in the SMM handler * 3. Stub - SMM stub code for calling into handler * 4. Handler - C-based SMM handler. * - * The compoents are assumed to consist of one consecutive region. + * The components are assumed to consist of one consecutive region. */ -/* These paramters are used by the SMM stub code. A pointer to the params +/* These parameters are used by the SMM stub code. A pointer to the params * is also passed to the C-base handler. */ struct smm_stub_params { u32 stack_size; @@ -80,7 +80,7 @@ static void smm_place_jmp_instructions(void *entry_start, int stride, int num, /* Each entry point has an IP value of 0x8000. The SMBASE for each * cpu is different so the effective address of the entry instruction - * is different. Therefore, the relative displacment for each entry + * is different. Therefore, the relative displacement for each entry * instruction needs to be updated to reflect the current effective * IP. Additionally, the IP result from the jmp instruction is * calculated using the next instruction's address so the size of @@ -140,7 +140,7 @@ static void smm_stub_place_staggered_entry_points(char *base, stub_entry_offset = rmodule_entry_offset(smm_stub); /* If there are staggered entry points or the stub is not located - * at the SMM entry point then jmp instructionss need to be placed. */ + * at the SMM entry point then jmp instructions need to be placed. */ if (params->num_concurrent_save_states > 1 || stub_entry_offset != 0) { int num_entries; @@ -297,7 +297,7 @@ int smm_setup_relocation_handler(struct smm_loader_params *params) return -1; /* Since the relocation handler always uses stack, adjust the number - * of conccurent stack users to be CONFIG_MAX_CPUS. */ + * of concurrent stack users to be CONFIG_MAX_CPUS. */ if (params->num_concurrent_stacks == 0) params->num_concurrent_stacks = CONFIG_MAX_CPUS; @@ -318,7 +318,7 @@ int smm_setup_relocation_handler(struct smm_loader_params *params) * * It should be noted that this algorithm will not work for * SMM_DEFAULT_SIZE SMRAM regions such as the A segment. This algorithm - * expectes a region large enough to encompass the handler and stacks + * expects a region large enough to encompass the handler and stacks * as well as the SMM_DEFAULT_SIZE. */ int smm_load_module(void *smram, int size, struct smm_loader_params *params)