diff --git a/Documentation/mainboard/asrock/h77pro4-m.md b/Documentation/mainboard/asrock/h77pro4-m.md new file mode 100644 index 0000000000..45c603d7a3 --- /dev/null +++ b/Documentation/mainboard/asrock/h77pro4-m.md @@ -0,0 +1,174 @@ +# ASRock H77 Pro4-M + +The ASRock H77 Pro4-M is a microATX-sized desktop board for Intel Sandy +Bridge and Ivy Bridge CPUs. + +## Technology + +```eval_rst ++------------------+--------------------------------------------------+ +| Northbridge | :doc:`../../northbridge/intel/sandybridge/index` | ++------------------+--------------------------------------------------+ +| Southbridge | Intel H77 (bd82x6x) | ++------------------+--------------------------------------------------+ +| CPU socket | LGA 1155 | ++------------------+--------------------------------------------------+ +| RAM | 4 x DDR3-1600 | ++------------------+--------------------------------------------------+ +| Super I/O | Nuvoton NCT6776 | ++------------------+--------------------------------------------------+ +| Audio | Realtek ALC892 | ++------------------+--------------------------------------------------+ +| Network | Realtek RTL8111E | ++------------------+--------------------------------------------------+ +| Serial | Internal header (RS-232) | ++------------------+--------------------------------------------------+ +``` + +## Status + +Tests were done with SeaBIOS 1.14.0 and slackware64-live from 2019-07-12 +(linux-4.19.50). + +### Working + +- Sandy Bridge and Ivy Bridge CPUs (tested: i5-2500, Pentium G2120) +- Native RAM initialization with four DIMMs +- PS/2 combined port (mouse or keyboard) +- Integrated GPU by libgfxinit on all monitor ports (DVI-D, HDMI, D-Sub) +- PCIe graphics in the PEG slot +- All three additional PCIe slots +- All rear and internal USB2 ports +- All rear and internal USB3 ports +- All six SATA ports from the PCH (two 6 Gb/s, four 3 Gb/s) +- All two SATA ports from the ASM1061 PCIe-to-SATA bridge (6 Gb/s) +- Rear eSATA connector (multiplexed with one ASM1061 port) +- Gigabit Ethernet +- Console output on the serial port +- SeaBIOS 1.14.0 and 1.15.0 to boot Windows 10 (needs VGA BIOS) and Linux via +extlinux +- Internal flashing with flashrom-1.2, see +[Internal Programming](#internal-programming) +- External flashing with flashrom-1.2 and a Raspberry Pi 1 +- S3 suspend/resume from either Linux or Windows 10 +- Poweroff + +### Not working + +- Booting from the two SATA ports provided by the ASM1061 +- Automatic fan control with the NCT6776D Super I/O + +### Untested + +- EHCI debug +- S/PDIF audio +- Other audio jacks than the green one, and the front panel header +- Parallel port +- Infrared/CIR +- Wakeup from anything but the power button + +## Flashing coreboot + +```eval_rst ++---------------------+------------+ +| Type | Value | ++=====================+============+ +| Socketed flash | yes | ++---------------------+------------+ +| Model | W25Q64.V | ++---------------------+------------+ +| Size | 8 MiB | ++---------------------+------------+ +| Package | DIP-8 | ++---------------------+------------+ +| Write protection | no | ++---------------------+------------+ +| Dual BIOS feature | no | ++---------------------+------------+ +| Internal flashing | yes | ++---------------------+------------+ +``` + +The flash is divided into the following regions, as obtained with +`ifdtool -f rom.layout backup.rom`: +``` +00000000:00000fff fd +00200000:007fffff bios +00001000:001fffff me +``` + +### Internal programming + +The main SPI flash can be accessed using flashrom. By default, only +the BIOS region of the flash is writable. If you wish to change any +other region (Management Engine or flash descriptor), then an external +programmer is required. + +The following command may be used to flash coreboot: + +``` +$ sudo flashrom --noverify-all --ifd -i bios -p internal -w coreboot.rom +``` + +The use of `--noverify-all` is required since the Management Engine +region is not readable even by the host. + +```eval_rst +In addition to the information here, please see the +:doc:`../../flash_tutorial/index`. +``` + +## Hardware monitoring and fan control + +There are two fan headers for the CPU cooler, CPU_FAN1 and CPU_FAN2. They share +a single fan tachometer input on the Super I/O while some dedicated logic +selects which one is allowed to reach it. Two GPIO pins on the Super I/O are +used to control that logic. The firmware has to set them; coreboot selects +CPU_FAN1 by default, but the user can change that setting if it was built with +CONFIG_USE_OPTION_TABLE: + +``` +$ sudo nvramtool -e cpu_fan_header +[..] +$ sudo nvramtool -w cpu_fan_header=CPU_FAN2 +$ sudo nvramtool -w cpu_fan_header=None +$ sudo nvramtool -w cpu_fan_header=Both +``` + +The setting will take effect after a reboot. Selecting and connecting both fan +headers is possible but the Super I/O will report wrong fan speeds. + +Currently there is no automatic, OS-independent fan control, but a software +like `fancontrol` from the lm-sensors package can be used instead. + +## Serial port header + +Serial port 1, provided by the Super I/O, is exposed on a pin header. The +RS-232 signals are assigned to the header so that its pin numbers map directly +to the pin numbers of a DE-9 connector. If your serial port doesn't seem to +work, check if your bracket expects a different assignment. Also don't try to +connect it directly to a device that operates at TTL levels - it would need a +level converter like a MAX232. + +Here is a top view of the serial port header found on this board: + + +---+---+ + N/C | | 9 | RI -> pin 9 + +---+---+ + Pin 8 <- CTS | 8 | 7 | RTS -> pin 7 + +---+---+ + Pin 6 <- DSR | 6 | 5 | GND -> pin 5 + +---+---+ + Pin 4 <- DTR | 4 | 3 | TxD -> pin 3 + +---+---+ + Pin 2 <- RxD | 2 | 1 | DCD -> pin 1 + +---+---+ + +## eSATA + +The eSATA port on the rear I/O panel and the internal connector SATA3_A1 share +the same controller port on the ASM1061. Attaching an eSATA drive causes a +multiplexer chip to disconnect the internal port from the SATA controller and +connect the eSATA port instead. This can be seen on GP23 of the Super I/O +GPIOs: it is '0' when something is connected to the eSATA port and '1' +otherwise. diff --git a/Documentation/mainboard/index.md b/Documentation/mainboard/index.md index 0d5ec5f542..fc602de1a9 100644 --- a/Documentation/mainboard/index.md +++ b/Documentation/mainboard/index.md @@ -11,6 +11,7 @@ This section contains documentation about coreboot on specific mainboards. ## ASRock +- [H77 Pro4-M](asrock/h77pro4-m.md) - [H81M-HDS](asrock/h81m-hds.md) - [H110M-DVS](asrock/h110m-dvs.md) diff --git a/src/mainboard/asrock/h77pro4-m/Kconfig b/src/mainboard/asrock/h77pro4-m/Kconfig new file mode 100644 index 0000000000..50bf86c9db --- /dev/null +++ b/src/mainboard/asrock/h77pro4-m/Kconfig @@ -0,0 +1,27 @@ +# SPDX-License-Identifier: GPL-2.0-or-later + +if BOARD_ASROCK_H77PRO4_M + +config BOARD_SPECIFIC_OPTIONS + def_bool y + select BOARD_ROMSIZE_KB_8192 + select DRIVERS_ASMEDIA_ASPM_BLACKLIST + select HAVE_ACPI_RESUME + select HAVE_ACPI_TABLES + select HAVE_CMOS_DEFAULT + select HAVE_OPTION_TABLE + select INTEL_GMA_HAVE_VBT + select MAINBOARD_HAS_LIBGFXINIT + select NORTHBRIDGE_INTEL_SANDYBRIDGE + select SERIRQ_CONTINUOUS_MODE + select SOUTHBRIDGE_INTEL_C216 + select SUPERIO_NUVOTON_NCT6776 + select USE_NATIVE_RAMINIT + +config MAINBOARD_DIR + default "asrock/h77pro4-m" + +config MAINBOARD_PART_NUMBER + default "H77 Pro4-M" + +endif diff --git a/src/mainboard/asrock/h77pro4-m/Kconfig.name b/src/mainboard/asrock/h77pro4-m/Kconfig.name new file mode 100644 index 0000000000..03873b96f0 --- /dev/null +++ b/src/mainboard/asrock/h77pro4-m/Kconfig.name @@ -0,0 +1,2 @@ +config BOARD_ASROCK_H77PRO4_M + bool "H77 Pro4-M" diff --git a/src/mainboard/asrock/h77pro4-m/Makefile.inc b/src/mainboard/asrock/h77pro4-m/Makefile.inc new file mode 100644 index 0000000000..a0d1155a9a --- /dev/null +++ b/src/mainboard/asrock/h77pro4-m/Makefile.inc @@ -0,0 +1,7 @@ +# SPDX-License-Identifier: GPL-2.0-only + +bootblock-y += early_init.c +bootblock-y += gpio.c +romstage-y += early_init.c +romstage-y += gpio.c +ramstage-$(CONFIG_MAINBOARD_USE_LIBGFXINIT) += gma-mainboard.ads diff --git a/src/mainboard/asrock/h77pro4-m/acpi/ec.asl b/src/mainboard/asrock/h77pro4-m/acpi/ec.asl new file mode 100644 index 0000000000..e69de29bb2 diff --git a/src/mainboard/asrock/h77pro4-m/acpi/platform.asl b/src/mainboard/asrock/h77pro4-m/acpi/platform.asl new file mode 100644 index 0000000000..146be6592e --- /dev/null +++ b/src/mainboard/asrock/h77pro4-m/acpi/platform.asl @@ -0,0 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ + +Method(_WAK, 1) +{ + Return(Package() {0, 0}) +} + +Method(_PTS, 1) +{ +} diff --git a/src/mainboard/asrock/h77pro4-m/acpi/superio.asl b/src/mainboard/asrock/h77pro4-m/acpi/superio.asl new file mode 100644 index 0000000000..55b1db5b11 --- /dev/null +++ b/src/mainboard/asrock/h77pro4-m/acpi/superio.asl @@ -0,0 +1,3 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include diff --git a/src/mainboard/asrock/h77pro4-m/board_info.txt b/src/mainboard/asrock/h77pro4-m/board_info.txt new file mode 100644 index 0000000000..5f86088de5 --- /dev/null +++ b/src/mainboard/asrock/h77pro4-m/board_info.txt @@ -0,0 +1,7 @@ +Category: desktop +Board URL: https://www.asrock.com/mb/Intel/H77%20Pro4-M/ +ROM package: DIP-8 +ROM protocol: SPI +ROM socketed: y +Flashrom support: y +Release year: 2012 diff --git a/src/mainboard/asrock/h77pro4-m/cmos.default b/src/mainboard/asrock/h77pro4-m/cmos.default new file mode 100644 index 0000000000..23386fb6d3 --- /dev/null +++ b/src/mainboard/asrock/h77pro4-m/cmos.default @@ -0,0 +1,7 @@ +boot_option=Fallback +debug_level=Debug +nmi=Disable +power_on_after_fail=Disable +sata_mode=AHCI +gfx_uma_size=64M +cpu_fan_tach_src=CPU_FAN1 diff --git a/src/mainboard/asrock/h77pro4-m/cmos.layout b/src/mainboard/asrock/h77pro4-m/cmos.layout new file mode 100644 index 0000000000..ac88ee9621 --- /dev/null +++ b/src/mainboard/asrock/h77pro4-m/cmos.layout @@ -0,0 +1,96 @@ +## SPDX-License-Identifier: GPL-2.0-only + +# ----------------------------------------------------------------- +entries + +# ----------------------------------------------------------------- +0 120 r 0 reserved_memory + +# ----------------------------------------------------------------- +# RTC_BOOT_BYTE (coreboot hardcoded) +384 1 e 2 boot_option +388 4 h 0 reboot_counter + +# ----------------------------------------------------------------- +# coreboot config options: console +395 4 e 3 debug_level + +# coreboot config options: southbridge +408 1 e 1 nmi + +409 2 e 4 power_on_after_fail +411 2 e 5 sata_mode + +# coreboot config options: northbridge +416 5 e 6 gfx_uma_size + +# coreboot config options: mainboard-specific +421 2 e 7 cpu_fan_tach_src + +# coreboot config options: check sums +984 16 h 0 check_sum + +# ----------------------------------------------------------------- + +enumerations +#ID value text + +# Generic on/off enum +1 0 Disable +1 1 Enable + +# boot_option +2 0 Fallback +2 1 Normal + +# debug_level +3 0 Emergency +3 1 Alert +3 2 Critical +3 3 Error +3 4 Warning +3 5 Notice +3 6 Info +3 7 Debug +3 8 Spew + +# power_on_after_fail +4 0 Disable +4 1 Enable +4 2 Keep + +# sata_mode +5 0 AHCI +5 1 Compatible +5 2 Legacy + +# gfx_uma_size (Intel IGP Video RAM size) +6 0 32M +6 1 64M +6 2 96M +6 3 128M +6 4 160M +6 5 192M +6 6 224M +6 7 256M +6 8 288M +6 9 320M +6 10 352M +6 11 384M +6 12 416M +6 13 448M +6 14 480M +6 15 512M +6 16 1024M + +# cpu_fan_header (select which header provides the tachometer +# signal to the Super I/O on its CPUFANIN input) +7 0 None +7 1 CPU_FAN1 +7 2 CPU_FAN2 +7 3 Both + +# ----------------------------------------------------------------- +checksums + +checksum 392 423 984 diff --git a/src/mainboard/asrock/h77pro4-m/data.vbt b/src/mainboard/asrock/h77pro4-m/data.vbt new file mode 100644 index 0000000000..52a8268f33 Binary files /dev/null and b/src/mainboard/asrock/h77pro4-m/data.vbt differ diff --git a/src/mainboard/asrock/h77pro4-m/devicetree.cb b/src/mainboard/asrock/h77pro4-m/devicetree.cb new file mode 100644 index 0000000000..86468c1e54 --- /dev/null +++ b/src/mainboard/asrock/h77pro4-m/devicetree.cb @@ -0,0 +1,140 @@ +# SPDX-License-Identifier: GPL-2.0-or-later + +chip northbridge/intel/sandybridge + device cpu_cluster 0 on + chip cpu/intel/model_206ax + register "acpi_c1" = "1" + register "acpi_c2" = "3" + register "acpi_c3" = "5" + device lapic 0 on end + device lapic 0xacac off end + end + end + device domain 0 on + device pci 00.0 on # Host bridge + subsystemid 0x1849 0x0100 + end + device pci 01.0 on end # PEG - slot "PCIE1" + device pci 02.0 on # iGPU + subsystemid 0x1849 0x0102 + end + chip southbridge/intel/bd82x6x # Intel Series 7 Panther Point PCH + register "gen1_dec" = "0x000c0291" + register "gen2_dec" = "0x000c0241" + register "gen3_dec" = "0x000c0251" + register "sata_interface_speed_support" = "0x3" + register "sata_port_map" = "0x3f" + register "spi_lvscc" = "0x2005" + register "spi_uvscc" = "0x2005" + register "superspeed_capable_ports" = "0x0000000f" + register "xhci_overcurrent_mapping" = "0x00000c03" + register "xhci_switchable_ports" = "0x0000000f" + device pci 14.0 on # USB 3.0 Controller + subsystemid 0x1849 0x1e31 + end + device pci 16.0 on # Management Engine Interface 1 + subsystemid 0x1849 0x1e3a + end + device pci 16.1 off end # Management Engine Interface 2 + device pci 16.2 off end # Management Engine IDE-R + device pci 16.3 off end # Management Engine KT + device pci 19.0 off end # Intel Gigabit Ethernet + device pci 1a.0 on # USB2 EHCI #2 + subsystemid 0x1849 0x1e2d + end + device pci 1b.0 on # High Definition Audio + subsystemid 0x1849 0x8892 + end + device pci 1c.0 on # PCIe Port #1 - slot "PCIE4", 4 lanes + subsystemid 0x1849 0x1e10 + end + device pci 1c.1 off end # PCIe Port #2 + device pci 1c.2 off end # PCIe Port #3 + device pci 1c.3 off end # PCIe Port #4 + device pci 1c.4 on # PCIe Port #5 - slot "PCIE2", 1 lane + subsystemid 0x1849 0x1e18 + end + device pci 1c.5 on # PCIe Port #6 - RTL8111E GbE + subsystemid 0x1849 0x1e1a + end + device pci 1c.6 on # PCIe Port #7 - slot "PCIE3", 1 lane + subsystemid 0x1849 0x1e16 + end + device pci 1c.7 on # PCIe Port #8 - ASM1061 SATA Controller + subsystemid 0x1849 0x1e1e + end + device pci 1d.0 on # USB2 EHCI #1 + subsystemid 0x1849 0x1e26 + end + device pci 1e.0 off end # PCI bridge + device pci 1f.0 on # LPC bridge + subsystemid 0x1849 0x1e4a + chip superio/nuvoton/nct6776 + device pnp 2e.0 off end # Floppy + device pnp 2e.1 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 5 + drq 0x74 = 3 + end + device pnp 2e.2 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 off end # COM2, IR + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.6 off end # CIR + device pnp 2e.7 off end # GPIO8 + device pnp 2e.107 off end # GPIO9 + device pnp 2e.8 off end # WDT1 + device pnp 2e.108 off end # GPIO0 + device pnp 2e.208 off end # GPIOA + device pnp 2e.308 on # GPIO base + io 0x60 = 0x0 + irq 0xf0 = 0x3e # + GPIO1 direction + irq 0xf1 = 0xde # + GPIO1 value + end + device pnp 2e.109 on end # GPIO1 + device pnp 2e.209 on # GPIO2 + irq 0xe0 = 0xff # + GPIO2 direction + irq 0xe1 = 0x0c # + GPIO2 value + end + device pnp 2e.309 on # GPIO3 + irq 0xe4 = 0xf7 # + GPIO3 direction + irq 0xe5 = 0x08 # + GPIO3 value + end + device pnp 2e.409 off end # GPIO4 + device pnp 2e.509 off end # GPIO5 + device pnp 2e.609 off end # GPIO6 + device pnp 2e.709 on end # GPIO7 + device pnp 2e.a on # ACPI + irq 0xe4 = 0x10 # + enable 3VSBSW# + irq 0xf0 = 0x20 # + pin 70 = 3VSBSW + end + device pnp 2e.b on # HWM, front panel LED + irq 0x30 = 0xe1 # + Fan RPM sense pins + io 0x60 = 0x0290 # + HWM base address + end + device pnp 2e.d off end # VID + device pnp 2e.e off end # CIR WAKE-UP + device pnp 2e.f off end # GPIO Push-Pull or Open-drain + device pnp 2e.14 off end # SVID + device pnp 2e.16 off end # Deep Sleep + device pnp 2e.17 off end # GPIOA + end + end + device pci 1f.2 on # SATA (AHCI) + subsystemid 0x1849 0x1e02 + end + device pci 1f.3 on # SMBus + subsystemid 0x1849 0x1e22 + end + device pci 1f.5 off end # SATA (Legacy) + device pci 1f.6 off end # Thermal + end + end +end diff --git a/src/mainboard/asrock/h77pro4-m/dsdt.asl b/src/mainboard/asrock/h77pro4-m/dsdt.asl new file mode 100644 index 0000000000..33cd0e5d0b --- /dev/null +++ b/src/mainboard/asrock/h77pro4-m/dsdt.asl @@ -0,0 +1,26 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include +DefinitionBlock( + "dsdt.aml", + "DSDT", + ACPI_DSDT_REV_2, + OEM_ID, + ACPI_TABLE_CREATOR, + 0x20141018 +) +{ + #include + #include "acpi/platform.asl" + #include + #include + + #include + #include + + Device (\_SB.PCI0) + { + #include + #include + } +} diff --git a/src/mainboard/asrock/h77pro4-m/early_init.c b/src/mainboard/asrock/h77pro4-m/early_init.c new file mode 100644 index 0000000000..48024cba5c --- /dev/null +++ b/src/mainboard/asrock/h77pro4-m/early_init.c @@ -0,0 +1,97 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include + +#include +#include +#include +#include +#include +#include +#include +#include + +#define GLOBAL_DEV PNP_DEV(0x2e, 0) +#define SERIAL_DEV PNP_DEV(0x2e, NCT6776_SP1) +#define GPIO6789_DEV PNP_DEV(0x2e, NCT6776_GPIO6789_V) + +/* As defined in cmos.layout */ +enum cpu_fan_tach_src { + CPU_FAN_HEADER_NONE, + CPU_FAN_HEADER_1, + CPU_FAN_HEADER_2, + CPU_FAN_HEADER_BOTH +}; + +const struct southbridge_usb_port mainboard_usb_ports[] = { + { 1, 0, 0 }, + { 1, 0, 0 }, + { 1, 1, 1 }, + { 1, 1, 1 }, + { 1, 1, 2 }, + { 1, 1, 2 }, + { 1, 0, 3 }, + { 1, 0, 3 }, + { 1, 0, 4 }, + { 1, 0, 4 }, + { 1, 0, 6 }, + { 1, 1, 5 }, + { 1, 1, 5 }, + { 1, 0, 6 }, +}; + +/* + * The tachometer signal that goes to CPUFANIN of the Super I/O is set via + * GPIOs. + * + * When GP77 (register E1h[7]) is '0', CPU_FAN1 is connected. + * When GP76 (register E1h[6]) is '0', CPU_FAN2 is connected. + * When both are '0' and both fans are connected, wrong readings will + * be reported. + */ +static u8 get_cpufanin_gpio_config(void) +{ + switch (get_uint_option("cpu_fan_tach_src", CPU_FAN_HEADER_1)) { + case CPU_FAN_HEADER_NONE: + return 0xff; + case CPU_FAN_HEADER_1: + default: + return 0x7f; + case CPU_FAN_HEADER_2: + return 0xbf; + case CPU_FAN_HEADER_BOTH: + return 0x3f; + } +}; + +void bootblock_mainboard_early_init(void) +{ + nuvoton_pnp_enter_conf_state(GLOBAL_DEV); + + /* Configure Super I/O pins */ + pnp_write_config(GLOBAL_DEV, 0x1b, 0x68); + pnp_write_config(GLOBAL_DEV, 0x1c, 0x80); + pnp_write_config(GLOBAL_DEV, 0x24, 0x5c); + pnp_write_config(GLOBAL_DEV, 0x27, 0xc0); + pnp_write_config(GLOBAL_DEV, 0x2a, 0x62); + pnp_write_config(GLOBAL_DEV, 0x2b, 0x08); + pnp_write_config(GLOBAL_DEV, 0x2c, 0x80); + + /* GP77 and GP76 are outputs. They set the tachometer input on CPUFANIN. */ + pnp_set_logical_device(GPIO6789_DEV); + pnp_write_config(GPIO6789_DEV, 0xe0, 0x3f); + pnp_write_config(GPIO6789_DEV, 0xe1, get_cpufanin_gpio_config()); + + nuvoton_pnp_exit_conf_state(GLOBAL_DEV); + + /* Enable UART */ + nuvoton_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); +} + +void mainboard_get_spd(spd_raw_data *spd, bool id_only) +{ + read_spd(&spd[0], 0x50, id_only); + read_spd(&spd[1], 0x51, id_only); + read_spd(&spd[2], 0x52, id_only); + read_spd(&spd[3], 0x53, id_only); +} diff --git a/src/mainboard/asrock/h77pro4-m/gma-mainboard.ads b/src/mainboard/asrock/h77pro4-m/gma-mainboard.ads new file mode 100644 index 0000000000..b05255dea2 --- /dev/null +++ b/src/mainboard/asrock/h77pro4-m/gma-mainboard.ads @@ -0,0 +1,17 @@ +-- SPDX-License-Identifier: GPL-2.0-or-later + +with HW.GFX.GMA; +with HW.GFX.GMA.Display_Probing; + +use HW.GFX.GMA; +use HW.GFX.GMA.Display_Probing; + +private package GMA.Mainboard is + + ports : constant Port_List := + (HDMI1, -- DVI-D connector + HDMI3, -- HDMI connector + Analog, -- D-Sub connector + others => Disabled); + +end GMA.Mainboard; diff --git a/src/mainboard/asrock/h77pro4-m/gpio.c b/src/mainboard/asrock/h77pro4-m/gpio.c new file mode 100644 index 0000000000..84f4564fff --- /dev/null +++ b/src/mainboard/asrock/h77pro4-m/gpio.c @@ -0,0 +1,176 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include + +static const struct pch_gpio_set1 pch_gpio_set1_mode = { + .gpio0 = GPIO_MODE_GPIO, + .gpio1 = GPIO_MODE_GPIO, + .gpio2 = GPIO_MODE_NATIVE, + .gpio3 = GPIO_MODE_NATIVE, + .gpio4 = GPIO_MODE_NATIVE, + .gpio5 = GPIO_MODE_NATIVE, + .gpio6 = GPIO_MODE_GPIO, + .gpio7 = GPIO_MODE_GPIO, + .gpio8 = GPIO_MODE_GPIO, + .gpio9 = GPIO_MODE_NATIVE, + .gpio10 = GPIO_MODE_NATIVE, + .gpio11 = GPIO_MODE_NATIVE, + .gpio12 = GPIO_MODE_GPIO, + .gpio13 = GPIO_MODE_GPIO, + .gpio14 = GPIO_MODE_NATIVE, + .gpio15 = GPIO_MODE_GPIO, + .gpio16 = GPIO_MODE_GPIO, + .gpio17 = GPIO_MODE_GPIO, + .gpio18 = GPIO_MODE_NATIVE, + .gpio19 = GPIO_MODE_NATIVE, + .gpio20 = GPIO_MODE_NATIVE, + .gpio21 = GPIO_MODE_NATIVE, + .gpio22 = GPIO_MODE_NATIVE, + .gpio23 = GPIO_MODE_NATIVE, + .gpio24 = GPIO_MODE_GPIO, + .gpio25 = GPIO_MODE_NATIVE, + .gpio26 = GPIO_MODE_NATIVE, + .gpio27 = GPIO_MODE_GPIO, + .gpio28 = GPIO_MODE_GPIO, + .gpio29 = GPIO_MODE_GPIO, + .gpio30 = GPIO_MODE_NATIVE, + .gpio31 = GPIO_MODE_GPIO, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_direction = { + .gpio0 = GPIO_DIR_INPUT, + .gpio1 = GPIO_DIR_INPUT, + .gpio6 = GPIO_DIR_INPUT, + .gpio7 = GPIO_DIR_INPUT, + .gpio8 = GPIO_DIR_OUTPUT, + .gpio12 = GPIO_DIR_OUTPUT, + .gpio13 = GPIO_DIR_INPUT, + .gpio15 = GPIO_DIR_OUTPUT, + .gpio16 = GPIO_DIR_INPUT, + .gpio17 = GPIO_DIR_INPUT, + .gpio24 = GPIO_DIR_OUTPUT, + .gpio27 = GPIO_DIR_INPUT, + .gpio28 = GPIO_DIR_OUTPUT, + .gpio29 = GPIO_DIR_OUTPUT, + .gpio31 = GPIO_DIR_INPUT, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_level = { + .gpio8 = GPIO_LEVEL_HIGH, + .gpio12 = GPIO_LEVEL_HIGH, + .gpio15 = GPIO_LEVEL_LOW, + .gpio24 = GPIO_LEVEL_LOW, + .gpio28 = GPIO_LEVEL_LOW, + .gpio29 = GPIO_LEVEL_HIGH, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_reset = { +}; + +static const struct pch_gpio_set1 pch_gpio_set1_invert = { + .gpio13 = GPIO_INVERT, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_blink = { +}; + +static const struct pch_gpio_set2 pch_gpio_set2_mode = { + .gpio32 = GPIO_MODE_GPIO, + .gpio33 = GPIO_MODE_GPIO, + .gpio34 = GPIO_MODE_GPIO, + .gpio35 = GPIO_MODE_NATIVE, + .gpio36 = GPIO_MODE_NATIVE, + .gpio37 = GPIO_MODE_NATIVE, + .gpio38 = GPIO_MODE_NATIVE, + .gpio39 = GPIO_MODE_NATIVE, + .gpio40 = GPIO_MODE_NATIVE, + .gpio41 = GPIO_MODE_NATIVE, + .gpio42 = GPIO_MODE_NATIVE, + .gpio43 = GPIO_MODE_NATIVE, + .gpio44 = GPIO_MODE_NATIVE, + .gpio45 = GPIO_MODE_NATIVE, + .gpio46 = GPIO_MODE_NATIVE, + .gpio47 = GPIO_MODE_NATIVE, + .gpio48 = GPIO_MODE_NATIVE, + .gpio49 = GPIO_MODE_GPIO, + .gpio50 = GPIO_MODE_NATIVE, + .gpio51 = GPIO_MODE_NATIVE, + .gpio52 = GPIO_MODE_NATIVE, + .gpio53 = GPIO_MODE_NATIVE, + .gpio54 = GPIO_MODE_NATIVE, + .gpio55 = GPIO_MODE_NATIVE, + .gpio56 = GPIO_MODE_NATIVE, + .gpio57 = GPIO_MODE_GPIO, + .gpio58 = GPIO_MODE_NATIVE, + .gpio59 = GPIO_MODE_NATIVE, + .gpio60 = GPIO_MODE_NATIVE, + .gpio61 = GPIO_MODE_NATIVE, + .gpio62 = GPIO_MODE_NATIVE, + .gpio63 = GPIO_MODE_NATIVE, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_direction = { + .gpio32 = GPIO_DIR_OUTPUT, + .gpio33 = GPIO_DIR_OUTPUT, + .gpio34 = GPIO_DIR_INPUT, + .gpio49 = GPIO_DIR_INPUT, + .gpio57 = GPIO_DIR_INPUT, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_level = { + .gpio32 = GPIO_LEVEL_HIGH, + .gpio33 = GPIO_LEVEL_HIGH, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_reset = { +}; + +static const struct pch_gpio_set3 pch_gpio_set3_mode = { + .gpio64 = GPIO_MODE_NATIVE, + .gpio65 = GPIO_MODE_NATIVE, + .gpio66 = GPIO_MODE_NATIVE, + .gpio67 = GPIO_MODE_NATIVE, + .gpio68 = GPIO_MODE_GPIO, + .gpio69 = GPIO_MODE_GPIO, + .gpio70 = GPIO_MODE_NATIVE, + .gpio71 = GPIO_MODE_NATIVE, + .gpio72 = GPIO_MODE_GPIO, + .gpio73 = GPIO_MODE_NATIVE, + .gpio74 = GPIO_MODE_NATIVE, + .gpio75 = GPIO_MODE_NATIVE, +}; + +static const struct pch_gpio_set3 pch_gpio_set3_direction = { + .gpio68 = GPIO_DIR_INPUT, + .gpio69 = GPIO_DIR_INPUT, + .gpio72 = GPIO_DIR_INPUT, +}; + +static const struct pch_gpio_set3 pch_gpio_set3_level = { +}; + +static const struct pch_gpio_set3 pch_gpio_set3_reset = { +}; + +const struct pch_gpio_map mainboard_gpio_map = { + .set1 = { + .mode = &pch_gpio_set1_mode, + .direction = &pch_gpio_set1_direction, + .level = &pch_gpio_set1_level, + .blink = &pch_gpio_set1_blink, + .invert = &pch_gpio_set1_invert, + .reset = &pch_gpio_set1_reset, + }, + .set2 = { + .mode = &pch_gpio_set2_mode, + .direction = &pch_gpio_set2_direction, + .level = &pch_gpio_set2_level, + .reset = &pch_gpio_set2_reset, + }, + .set3 = { + .mode = &pch_gpio_set3_mode, + .direction = &pch_gpio_set3_direction, + .level = &pch_gpio_set3_level, + .reset = &pch_gpio_set3_reset, + }, +}; diff --git a/src/mainboard/asrock/h77pro4-m/hda_verb.c b/src/mainboard/asrock/h77pro4-m/hda_verb.c new file mode 100644 index 0000000000..51133e7c7c --- /dev/null +++ b/src/mainboard/asrock/h77pro4-m/hda_verb.c @@ -0,0 +1,36 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include + +const u32 cim_verb_data[] = { + 0x10ec0892, /* Codec Vendor / Device ID: Realtek ALC892 */ + 0x18498892, /* Subsystem ID */ + 15, /* Number of 4 dword sets */ + AZALIA_SUBVENDOR(0, 0x18498892), + AZALIA_PIN_CFG(0, 0x11, 0x411111f0), + AZALIA_PIN_CFG(0, 0x12, 0x411111f0), + AZALIA_PIN_CFG(0, 0x14, 0x01014010), + AZALIA_PIN_CFG(0, 0x15, 0x01011012), + AZALIA_PIN_CFG(0, 0x16, 0x01016011), + AZALIA_PIN_CFG(0, 0x17, 0x411111f0), + AZALIA_PIN_CFG(0, 0x18, 0x01a19840), + AZALIA_PIN_CFG(0, 0x19, 0x02a19950), + AZALIA_PIN_CFG(0, 0x1a, 0x0181304f), + AZALIA_PIN_CFG(0, 0x1b, 0x02214120), + AZALIA_PIN_CFG(0, 0x1c, 0x411111f0), + AZALIA_PIN_CFG(0, 0x1d, 0x4005e601), + AZALIA_PIN_CFG(0, 0x1e, 0x01452130), + AZALIA_PIN_CFG(0, 0x1f, 0x411111f0), + + 0x80862806, /* Codec Vendor / Device ID: Intel */ + 0x80860101, /* Subsystem ID */ + 4, /* Number of 4 dword sets */ + AZALIA_SUBVENDOR(3, 0x80860101), + AZALIA_PIN_CFG(3, 0x05, 0x18560010), + AZALIA_PIN_CFG(3, 0x06, 0x58560020), + AZALIA_PIN_CFG(3, 0x07, 0x18560030), +}; + +const u32 pc_beep_verbs[0] = {}; + +AZALIA_ARRAY_SIZES;