sc7280: Refactor QUP driver
Enable common qup driver in sc7280 BUG=b:182963902 TEST=Validated on qualcomm sc7280 development board Signed-off-by: Rajesh Patil <rajpat@codeaurora.org> Change-Id: I0e9049557ff63898037210e72333e1739ab62413 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55960 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
This commit is contained in:
Rajesh Patil
Shelley Chen
parent
16612c4835
commit
4f96b064f2
|
|
@ -6,6 +6,9 @@ all-y += ../common/clock.c
|
|||
all-y += clock.c
|
||||
all-y += ../common/spi.c
|
||||
all-$(CONFIG_SC7280_QSPI) += ../common/qspi.c
|
||||
all-y += ../common/qupv3_config.c
|
||||
all-y += qcom_qup_se.c
|
||||
all-y += ../common/qup_se_handler.c
|
||||
|
||||
################################################################################
|
||||
bootblock-y += bootblock.c
|
||||
|
|
@ -63,4 +66,28 @@ $(DCB_CBFS)-type := raw
|
|||
$(DCB_CBFS)-compression := $(CBFS_COMPRESS_FLAG)
|
||||
cbfs-files-y += $(DCB_CBFS)
|
||||
|
||||
################################################################################
|
||||
UART_FW_FILE := $(SC7280_BLOB)/qup_fw/uart_fw.bin
|
||||
UART_FW_CBFS := $(CONFIG_CBFS_PREFIX)/uart_fw
|
||||
$(UART_FW_CBFS)-file := $(UART_FW_FILE)
|
||||
$(UART_FW_CBFS)-type := raw
|
||||
$(UART_FW_CBFS)-compression := none
|
||||
cbfs-files-y += $(UART_FW_CBFS)
|
||||
|
||||
################################################################################
|
||||
SPI_FW_FILE := $(SC7280_BLOB)/qup_fw/spi_fw.bin
|
||||
SPI_FW_CBFS := $(CONFIG_CBFS_PREFIX)/spi_fw
|
||||
$(SPI_FW_CBFS)-file := $(SPI_FW_FILE)
|
||||
$(SPI_FW_CBFS)-type := raw
|
||||
$(SPI_FW_CBFS)-compression := none
|
||||
cbfs-files-y += $(SPI_FW_CBFS)
|
||||
|
||||
################################################################################
|
||||
I2C_FW_FILE := $(SC7280_BLOB)/qup_fw/i2c_fw.bin
|
||||
I2C_FW_CBFS := $(CONFIG_CBFS_PREFIX)/i2c_fw
|
||||
$(I2C_FW_CBFS)-file := $(I2C_FW_FILE)
|
||||
$(I2C_FW_CBFS)-type := raw
|
||||
$(I2C_FW_CBFS)-compression := none
|
||||
cbfs-files-y += $(I2C_FW_CBFS)
|
||||
|
||||
endif
|
||||
|
|
|
|||
|
|
@ -3,9 +3,11 @@
|
|||
#include <bootblock_common.h>
|
||||
#include <soc/clock.h>
|
||||
#include <soc/qspi_common.h>
|
||||
#include <soc/qupv3_config_common.h>
|
||||
|
||||
void bootblock_soc_init(void)
|
||||
{
|
||||
clock_init();
|
||||
quadspi_init(37500 * KHz);
|
||||
qupv3_fw_init();
|
||||
}
|
||||
|
|
|
|||
|
|
@ -28,4 +28,31 @@
|
|||
#define SDC1_TLMM_CFG_ADDR 0x0F1B3000
|
||||
#define SDC2_TLMM_CFG_ADDR 0x0F1B4000
|
||||
|
||||
/*
|
||||
* QUP SERIAL ENGINE BASE ADDRESSES
|
||||
*/
|
||||
/* QUPV3_0 */
|
||||
#define QUP_SERIAL0_BASE 0x00980000
|
||||
#define QUP_SERIAL1_BASE 0x00984000
|
||||
#define QUP_SERIAL2_BASE 0x00988000
|
||||
#define QUP_SERIAL3_BASE 0x0098C000
|
||||
#define QUP_SERIAL4_BASE 0x00990000
|
||||
#define QUP_SERIAL5_BASE 0x00994000
|
||||
#define QUP_SERIAL6_BASE 0x00998000
|
||||
#define QUP_SERIAL7_BASE 0x0099C000
|
||||
#define QUP_WRAP0_BASE 0x009C0000
|
||||
#define QUP_0_GSI_BASE 0x00904000
|
||||
|
||||
/* QUPV3_1 */
|
||||
#define QUP_SERIAL8_BASE 0x00A80000
|
||||
#define QUP_SERIAL9_BASE 0x00A84000
|
||||
#define QUP_SERIAL10_BASE 0x00A88000
|
||||
#define QUP_SERIAL11_BASE 0x00A8C000
|
||||
#define QUP_SERIAL12_BASE 0x00A90000
|
||||
#define QUP_SERIAL13_BASE 0x00A94000
|
||||
#define QUP_SERIAL14_BASE 0x00A98000
|
||||
#define QUP_SERIAL15_BASE 0x00A9C000
|
||||
#define QUP_WRAP1_BASE 0x00AC0000
|
||||
#define QUP_1_GSI_BASE 0x00A04000
|
||||
|
||||
#endif /* __SOC_QUALCOMM_SC7280_ADDRESS_MAP_H__ */
|
||||
|
|
|
|||
|
|
@ -0,0 +1,43 @@
|
|||
/* SPDX-License-Identifier: GPL-2.0-only */
|
||||
|
||||
#ifndef __SOC_QCOM_QUP_SE_H__
|
||||
#define __SOC_QCOM_QUP_SE_H__
|
||||
|
||||
#include <console/console.h>
|
||||
#include <device/mmio.h>
|
||||
#include <gpio.h>
|
||||
#include <soc/addressmap.h>
|
||||
#include <timer.h>
|
||||
#include <types.h>
|
||||
|
||||
enum qup_se {
|
||||
QUPV3_0_SE0,
|
||||
QUPV3_0_SE1,
|
||||
QUPV3_0_SE2,
|
||||
QUPV3_0_SE3,
|
||||
QUPV3_0_SE4,
|
||||
QUPV3_0_SE5,
|
||||
QUPV3_0_SE6,
|
||||
QUPV3_0_SE7,
|
||||
QUPV3_1_SE0,
|
||||
QUPV3_1_SE1,
|
||||
QUPV3_1_SE2,
|
||||
QUPV3_1_SE3,
|
||||
QUPV3_1_SE4,
|
||||
QUPV3_1_SE5,
|
||||
QUPV3_1_SE6,
|
||||
QUPV3_1_SE7,
|
||||
QUPV3_SE_MAX,
|
||||
};
|
||||
|
||||
struct qup {
|
||||
struct qup_regs *regs;
|
||||
gpio_t pin[4];
|
||||
u8 func[4];
|
||||
};
|
||||
|
||||
extern struct qup qup[QUPV3_SE_MAX];
|
||||
|
||||
#define MAX_OFFSET_CFG_REG 0x000001c4
|
||||
|
||||
#endif /* __SOC_QCOM_QUP_SE_H__ */
|
||||
|
|
@ -0,0 +1,86 @@
|
|||
/* SPDX-License-Identifier: GPL-2.0-only */
|
||||
|
||||
#include <soc/qcom_qup_se.h>
|
||||
|
||||
struct qup qup[QUPV3_SE_MAX] = {
|
||||
[QUPV3_0_SE0] = { .regs = (void *)QUP_SERIAL0_BASE,
|
||||
.pin = { GPIO(0), GPIO(1), GPIO(2), GPIO(3) },
|
||||
.func = { GPIO0_FUNC_QUP0_L0, GPIO1_FUNC_QUP0_L1,
|
||||
GPIO2_FUNC_QUP0_L2, GPIO3_FUNC_QUP0_L3 }
|
||||
},
|
||||
[QUPV3_0_SE1] = { .regs = (void *)QUP_SERIAL1_BASE,
|
||||
.pin = { GPIO(4), GPIO(5), GPIO(6), GPIO(7) },
|
||||
.func = { GPIO4_FUNC_QUP0_L0, GPIO5_FUNC_QUP0_L1,
|
||||
GPIO6_FUNC_QUP0_L2, GPIO7_FUNC_QUP0_L3 }
|
||||
},
|
||||
[QUPV3_0_SE2] = { .regs = (void *)QUP_SERIAL2_BASE,
|
||||
.pin = { GPIO(8), GPIO(9), GPIO(10), GPIO(11) },
|
||||
.func = { GPIO8_FUNC_QUP0_L0, GPIO9_FUNC_QUP0_L1,
|
||||
GPIO10_FUNC_QUP0_L2, GPIO11_FUNC_QUP0_L3 }
|
||||
},
|
||||
[QUPV3_0_SE3] = { .regs = (void *)QUP_SERIAL3_BASE,
|
||||
.pin = { GPIO(12), GPIO(13), GPIO(14), GPIO(15) },
|
||||
.func = { GPIO12_FUNC_QUP0_L0, GPIO13_FUNC_QUP0_L1,
|
||||
GPIO14_FUNC_QUP0_L2, GPIO15_FUNC_QUP0_L3 }
|
||||
},
|
||||
[QUPV3_0_SE4] = { .regs = (void *)QUP_SERIAL4_BASE,
|
||||
.pin = { GPIO(16), GPIO(17), GPIO(18), GPIO(19) },
|
||||
.func = { GPIO16_FUNC_QUP0_L0, GPIO17_FUNC_QUP0_L1,
|
||||
GPIO18_FUNC_QUP0_L2, GPIO19_FUNC_QUP0_L3 }
|
||||
},
|
||||
[QUPV3_0_SE5] = { .regs = (void *)QUP_SERIAL5_BASE,
|
||||
.pin = { GPIO(20), GPIO(21), GPIO(22), GPIO(23) },
|
||||
.func = { GPIO20_FUNC_QUP0_L0, GPIO21_FUNC_QUP0_L1,
|
||||
GPIO22_FUNC_QUP0_L2, GPIO23_FUNC_QUP0_L3 }
|
||||
},
|
||||
[QUPV3_0_SE6] = { .regs = (void *)QUP_SERIAL6_BASE,
|
||||
.pin = { GPIO(24), GPIO(25), GPIO(26), GPIO(27) },
|
||||
.func = { GPIO24_FUNC_QUP0_L0, GPIO25_FUNC_QUP0_L1,
|
||||
GPIO26_FUNC_QUP0_L2, GPIO27_FUNC_QUP0_L3 }
|
||||
},
|
||||
[QUPV3_0_SE7] = { .regs = (void *)QUP_SERIAL7_BASE,
|
||||
.pin = { GPIO(28), GPIO(29), GPIO(30), GPIO(31) },
|
||||
.func = { GPIO28_FUNC_QUP0_L0, GPIO29_FUNC_QUP0_L1,
|
||||
GPIO30_FUNC_QUP0_L2, GPIO31_FUNC_QUP0_L3 }
|
||||
},
|
||||
[QUPV3_1_SE0] = { .regs = (void *)QUP_SERIAL8_BASE,
|
||||
.pin = { GPIO(32), GPIO(33), GPIO(34), GPIO(35) },
|
||||
.func = { GPIO32_FUNC_QUP1_L0, GPIO33_FUNC_QUP1_L1,
|
||||
GPIO34_FUNC_QUP1_L2, GPIO35_FUNC_QUP1_L3 }
|
||||
},
|
||||
[QUPV3_1_SE1] = { .regs = (void *)QUP_SERIAL9_BASE,
|
||||
.pin = { GPIO(36), GPIO(37), GPIO(38), GPIO(39) },
|
||||
.func = { GPIO36_FUNC_QUP1_L0, GPIO37_FUNC_QUP1_L1,
|
||||
GPIO38_FUNC_QUP1_L2, GPIO39_FUNC_QUP1_L3 }
|
||||
},
|
||||
[QUPV3_1_SE2] = { .regs = (void *)QUP_SERIAL10_BASE,
|
||||
.pin = { GPIO(40), GPIO(41), GPIO(42), GPIO(43) },
|
||||
.func = { GPIO40_FUNC_QUP1_L0, GPIO41_FUNC_QUP1_L1,
|
||||
GPIO42_FUNC_QUP1_L2, GPIO43_FUNC_QUP1_L3 }
|
||||
},
|
||||
[QUPV3_1_SE3] = { .regs = (void *)QUP_SERIAL11_BASE,
|
||||
.pin = { GPIO(44), GPIO(45), GPIO(46), GPIO(47) },
|
||||
.func = { GPIO44_FUNC_QUP1_L0, GPIO45_FUNC_QUP1_L1,
|
||||
GPIO46_FUNC_QUP1_L2, GPIO47_FUNC_QUP1_L3 }
|
||||
},
|
||||
[QUPV3_1_SE4] = { .regs = (void *)QUP_SERIAL12_BASE,
|
||||
.pin = { GPIO(48), GPIO(49), GPIO(50), GPIO(51) },
|
||||
.func = { GPIO48_FUNC_QUP1_L0, GPIO49_FUNC_QUP1_L1,
|
||||
GPIO50_FUNC_QUP1_L2, GPIO51_FUNC_QUP1_L3 }
|
||||
},
|
||||
[QUPV3_1_SE5] = { .regs = (void *)QUP_SERIAL13_BASE,
|
||||
.pin = { GPIO(52), GPIO(53), GPIO(54), GPIO(55) },
|
||||
.func = { GPIO52_FUNC_QUP1_L0, GPIO53_FUNC_QUP1_L1,
|
||||
GPIO54_FUNC_QUP1_L2, GPIO55_FUNC_QUP1_L3 }
|
||||
},
|
||||
[QUPV3_1_SE6] = { .regs = (void *)QUP_SERIAL14_BASE,
|
||||
.pin = { GPIO(56), GPIO(57), GPIO(58), GPIO(59) },
|
||||
.func = { GPIO56_FUNC_QUP1_L0, GPIO57_FUNC_QUP1_L1,
|
||||
GPIO58_FUNC_QUP1_L2, GPIO59_FUNC_QUP1_L3 }
|
||||
},
|
||||
[QUPV3_1_SE7] = { .regs = (void *)QUP_SERIAL15_BASE,
|
||||
.pin = { GPIO(60), GPIO(61), GPIO(62), GPIO(63) },
|
||||
.func = { GPIO60_FUNC_QUP1_L0, GPIO61_FUNC_QUP1_L1,
|
||||
GPIO62_FUNC_QUP1_L2, GPIO63_FUNC_QUP1_L3 }
|
||||
},
|
||||
};
|
||||
Loading…
Reference in New Issue