1.1.6 adaptions

git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1446 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This commit is contained in:
Stefan Reinauer 2004-03-19 12:32:09 +00:00
parent 1943d501b4
commit 4fac6cfef8
4 changed files with 87 additions and 101 deletions

View File

@ -23,6 +23,12 @@ uses XIP_ROM_BASE
uses STACK_SIZE
uses HEAP_SIZE
uses USE_OPTION_TABLE
uses LB_CKS_RANGE_START
uses LB_CKS_RANGE_END
uses LB_CKS_LOC
uses MAINBOARD_PART_NUMBER
uses MAINBOARD_VENDOR
## ROM_SIZE is the size of boot ROM that this board will use.
default ROM_SIZE=524288
@ -45,7 +51,7 @@ default HAVE_HARD_RESET=1
## Build code to export a programmable irq routing table
##
default HAVE_PIRQ_TABLE=1
default IRQ_SLOT_COUNT=7
default IRQ_SLOT_COUNT=9
##
## Build code to export an x86 MP table
@ -58,6 +64,13 @@ default HAVE_MP_TABLE=1
##
default HAVE_OPTION_TABLE=1
##
## Move the default LinuxBIOS cmos range off of AMD RTC registers
##
default LB_CKS_RANGE_START=49
default LB_CKS_RANGE_END=122
default LB_CKS_LOC=123
##
## Build code for SMP support
## Only worry about 2 micro processors
@ -73,8 +86,8 @@ default CONFIG_IOAPIC=1
##
## Clean up the motherboard id strings
##
#default MAINBOARD_PART_NUMBER="QUARTET"
#default MAINBOARD_VENDOR="AMD"
default MAINBOARD_PART_NUMBER="QUARTET"
default MAINBOARD_VENDOR="AMD"
###
### LinuxBIOS layout values
@ -163,12 +176,12 @@ makerule ./failover.inc
end
makerule ./auto.E
depends "$(MAINBOARD)/auto.c"
action "$(CPP) -I$(TOP)/src $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/auto.c > ./auto.E"
depends "$(MAINBOARD)/auto.c option_table.h"
action "$(CPP) -I$(TOP)/src -I. $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/auto.c > ./auto.E"
end
makerule ./auto.inc
depends "./auto.E ./romcc"
action "./romcc -mcpu=k8 -O ./auto.E > auto.inc"
action "./romcc -mcpu=k8 -O2 ./auto.E > auto.inc"
end
##
@ -176,6 +189,7 @@ end
##
mainboardinit cpu/i386/entry16.inc
mainboardinit cpu/i386/entry32.inc
mainboardinit cpu/i386/bist32.inc
ldscript /cpu/i386/entry16.lds
ldscript /cpu/i386/entry32.lds
@ -334,4 +348,5 @@ end
##
mainboardinit pc80/serial.inc
mainboardinit arch/i386/lib/console.inc
mainboardinit cpu/i386/bist32_fail.inc

View File

@ -4,14 +4,16 @@
#include <stdint.h>
#include <device/pci_def.h>
#include <cpu/p6/apic.h>
#include <arch/io.h>
#include <device/pnp.h>
#include <device/pnp_def.h>
#include <arch/romcc_io.h>
#include <arch/smp/lapic.h>
#include "option_table.h"
#include "pc80/mc146818rtc_early.c"
#include "pc80/serial.c"
#include "arch/i386/lib/console.c"
#include "ram/ramtest.c"
#include "northbridge/amd/amdk8/early_ht.c"
#include "northbridge/amd/amdk8/incoherent_ht.c"
#include "southbridge/amd/amd8111/amd8111_early_smbus.c"
#include "northbridge/amd/amdk8/raminit.h"
#include "cpu/k8/apic_timer.c"
@ -20,8 +22,25 @@
#include "northbridge/amd/amdk8/reset_test.c"
#include "debug.c"
#include "northbridge/amd/amdk8/cpu_rev.c"
#include "superio/NSC/pc87360/pc87360_early_serial.c"
#define SIO_BASE 0x2e
#define SERIAL_DEV PNP_DEV(0x2e, PC87360_SP1)
static void hard_reset(void)
{
set_bios_reset();
/* enable cf9 */
pci_write_config8(PCI_DEV(0, 0x04, 3), 0x41, 0xf1);
/* reset */
outb(0x0e, 0x0cf9);
}
static void soft_reset(void)
{
set_bios_reset();
pci_write_config8(PCI_DEV(0, 0x04, 0), 0x47, 1);
}
static void memreset_setup(void)
{
@ -134,59 +153,6 @@ static void coherent_ht_mainboard(unsigned cpus)
#include "resourcemap.c" /* quartet does not want the default */
static void enable_lapic(void)
{
msr_t msr;
msr = rdmsr(0x1b);
msr.hi &= 0xffffff00;
msr.lo &= 0x000007ff;
msr.lo |= APIC_DEFAULT_BASE | (1 << 11);
wrmsr(0x1b, msr);
}
static void stop_this_cpu(void)
{
unsigned apicid;
apicid = apic_read(APIC_ID) >> 24;
/* Send an APIC INIT to myself */
apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(apicid));
apic_write(APIC_ICR, APIC_INT_LEVELTRIG | APIC_INT_ASSERT | APIC_DM_INIT);
/* Wait for the ipi send to finish */
apic_wait_icr_idle();
/* Deassert the APIC INIT */
apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(apicid));
apic_write(APIC_ICR, APIC_INT_LEVELTRIG | APIC_DM_INIT);
/* Wait for the ipi send to finish */
apic_wait_icr_idle();
/* If I haven't halted spin forever */
for(;;) {
hlt();
}
}
#define PC87360_FDC 0x00
#define PC87360_PP 0x01
#define PC87360_SP2 0x02
#define PC87360_SP1 0x03
#define PC87360_SWC 0x04
#define PC87360_KBCM 0x05
#define PC87360_KBCK 0x06
#define PC87360_GPIO 0x07
#define PC87360_ACB 0x08
#define PC87360_FSCM 0x09
#define PC87360_WDT 0x0A
static void pc87360_enable_serial(void)
{
pnp_set_logical_device(SIO_BASE, PC87360_SP1);
pnp_set_enable(SIO_BASE, 1);
pnp_set_iobase0(SIO_BASE, 0x3f8);
}
#define RC0 ((1<<1)<<8)
#define RC1 ((1<<2)<<8)
#define RC2 ((1<<3)<<8)
@ -237,23 +203,31 @@ static void main(void)
.channel1 = { RC3|DIMM1, RC3|DIMM3, 0, 0 },
}
};
int needs_reset;
enable_lapic();
init_timer();
if (cpu_init_detected()) {
asm("jmp __cpu_reset");
}
enable_lapic();
init_timer();
distinguish_cpu_resets();
if (!boot_cpu()) {
// notify_bsp_ap_is_stopped();
stop_this_cpu();
}
pc87360_enable_serial();
pc87360_enable_serial(SERIAL_DEV, TTYS0_BASE);
uart_init();
console_init();
setup_quartet_resource_map();
setup_coherent_ht_domain();
enumerate_ht_chain(0);
distinguish_cpu_resets(0);
needs_reset = setup_coherent_ht_domain();
needs_reset |= ht_setup_chain(PCI_DEV(0, 0x18, 0), 0x80);
if (needs_reset) {
print_info("ht reset -");
soft_reset();
}
#if 0
print_pci_devices();
#endif
@ -270,33 +244,8 @@ static void main(void)
#if 0
dump_pci_device(PCI_DEV(0, 0x18, 2));
#endif
/* Check all of memory */
#if 0
msr_t msr;
msr = rdmsr(TOP_MEM);
print_debug("TOP_MEM: ");
print_debug_hex32(msr.hi);
print_debug_hex32(msr.lo);
print_debug("\r\n");
#endif
#if 0
ram_check(0x00000000, msr.lo);
#endif
#if 0
static const struct {
unsigned long lo, hi;
} check_addrs[] = {
/* Check 16MB of memory @ 0*/
{ 0x00000000, 0x01000000 },
#if 0
/* Check 16MB of memory @ 2GB */
{ 0x80000000, 0x81000000 },
#endif
};
int i;
for(i = 0; i < sizeof(check_addrs)/sizeof(check_addrs[0]); i++) {
ram_check(check_addrs[i].lo, check_addrs[i].hi);
}
/* Check the first 1M */
ram_check(0x00000000, 0x000100000);
#endif
}

View File

@ -29,6 +29,9 @@ entries
386 1 e 1 ECC_memory
388 4 r 0 reboot_bits
392 3 e 5 baud_rate
395 1 e 1 hw_scrubber
396 1 e 1 interleave_chip_selects
397 2 e 8 max_mem_clock
400 1 e 1 power_on_after_fail
412 4 e 6 debug_level
416 4 e 7 boot_first
@ -36,7 +39,14 @@ entries
424 4 e 7 boot_third
428 4 h 0 boot_index
432 8 h 0 boot_countdown
1008 16 h 0 check_sum
440 4 e 9 slow_cpu
444 1 e 1 nmi
728 256 h 0 user_data
984 16 h 0 check_sum
# Reserve the extended AMD configuration registers
1000 24 r 0 reserved_memory
enumerations
@ -66,9 +76,21 @@ enumerations
7 9 Fallback_HDD
7 10 Fallback_Floppy
#7 3 ROM
8 0 200Mhz
8 1 166Mhz
8 2 133Mhz
8 3 100Mhz
9 0 off
9 1 87.5%
9 2 75.0%
9 3 62.5%
9 4 50.0%
9 5 37.5%
9 6 25.0%
9 7 12.5%
checksums
checksum 392 1007 1008
checksum 392 983 984

View File

@ -14,7 +14,7 @@ static void main(void)
{
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
enumerate_ht_chain(0);
enumerate_ht_chain();
/* Setup the 8111 */
amd8111_enable_rom();