soc/amd/stoneyridge: Replace public magic numbers

Some "magic" numbers became public available registers/bits after the code
was originally written. Find all magic numbers, and if available in a public
BKDG than replace them with literals.

BUG=b:117648026
TEST=Build and boot grunt.

Change-Id: I96ac59fd92c4a5e27c3836f77bf6633e9b0c4990
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/c/29198
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This commit is contained in:
Patrick Georgi 2018-10-23 14:35:37 +02:00
parent 37d5f004ab
commit 4fbefc5282
4 changed files with 16 additions and 5 deletions

View File

@ -31,6 +31,7 @@
#include <soc/acpi.h> #include <soc/acpi.h>
#include <soc/pci_devs.h> #include <soc/pci_devs.h>
#include <soc/southbridge.h> #include <soc/southbridge.h>
#include <soc/northbridge.h>
#include <soc/nvs.h> #include <soc/nvs.h>
#include <soc/gpio.h> #include <soc/gpio.h>
@ -237,11 +238,10 @@ void acpi_create_fadt(acpi_fadt_t *fadt, acpi_facs_t *facs, void *dsdt)
void generate_cpu_entries(struct device *device) void generate_cpu_entries(struct device *device)
{ {
int cores, cpu; int cores, cpu;
struct device *cdb_dev;
/* Stoney Ridge is single node, just report # of cores */ /* Stoney Ridge is single node, just report # of cores */
cdb_dev = dev_find_slot(0, NB_DEVFN); cores = pci_read_config32(SOC_NB_DEV, NB_CAPABILITIES2) & CMP_CAP_MASK;
cores = (pci_read_config32(cdb_dev, 0x84) & 0xff) + 1; cores++; /* number of cores is CmpCap+1 */
printk(BIOS_DEBUG, "ACPI \\_PR report %d core(s)\n", cores); printk(BIOS_DEBUG, "ACPI \\_PR report %d core(s)\n", cores);

View File

@ -62,9 +62,15 @@
# define MMIO_RE (1 << 0) # define MMIO_RE (1 << 0)
#define D18F1_MMIO_LIMIT0_LO 0x84 #define D18F1_MMIO_LIMIT0_LO 0x84
# define MMIO_NP (1 << 7) # define MMIO_NP (1 << 7)
#define D18F1_IO_BASE0_LO 0xc0
#define D18F1_IO_BASE1_LO 0xc8
#define D18F1_IO_BASE2_LO 0xd0
#define D18F1_IO_BASE3_LO 0xd8
#define D18F1_MMIO_BASE7_LO 0xb8
#define D18F1_MMIO_BASELIM0_HI 0x180 #define D18F1_MMIO_BASELIM0_HI 0x180
#define D18F1_MMIO_BASE8_LO 0x1a0 #define D18F1_MMIO_BASE8_LO 0x1a0
#define D18F1_MMIO_LIMIT8_LO 0x1a4 #define D18F1_MMIO_LIMIT8_LO 0x1a4
#define D18F1_MMIO_BASE11_LO 0x1b8
#define D18F1_MMIO_BASELIM8_HI 0x1c0 #define D18F1_MMIO_BASELIM8_HI 0x1c0
#define NB_MMIO_BASE_LO(reg) ((reg) * 2 * sizeof(uint32_t) + (((reg) < 8) \ #define NB_MMIO_BASE_LO(reg) ((reg) * 2 * sizeof(uint32_t) + (((reg) < 8) \
? D18F1_MMIO_BASE0_LO \ ? D18F1_MMIO_BASE0_LO \
@ -89,6 +95,10 @@
#define D18F1_VGAEN 0xf4 #define D18F1_VGAEN 0xf4
# define VGA_ADDR_ENABLE (1 << 0) # define VGA_ADDR_ENABLE (1 << 0)
/* D18F5 */
#define NB_CAPABILITIES2 0x84
#define CMP_CAP_MASK 0xff
enum { enum {
/* SMM handler area. */ /* SMM handler area. */
SMM_SUBREGION_HANDLER, SMM_SUBREGION_HANDLER,

View File

@ -304,6 +304,7 @@
#define LPC_WIDEIO2_GENERIC_PORT 0x90 #define LPC_WIDEIO2_GENERIC_PORT 0x90
#define SPIROM_BASE_ADDRESS_REGISTER 0xa0 #define SPIROM_BASE_ADDRESS_REGISTER 0xa0
#define SPI_BASE_RESERVED (BIT(4) | BIT(5))
#define ROUTE_TPM_2_SPI BIT(3) #define ROUTE_TPM_2_SPI BIT(3)
#define SPI_ABORT_ENABLE BIT(2) #define SPI_ABORT_ENABLE BIT(2)
#define SPI_ROM_ENABLE BIT(1) #define SPI_ROM_ENABLE BIT(1)

View File

@ -414,8 +414,8 @@ static uintptr_t sb_spibase(void)
/* Make sure the base address is predictable */ /* Make sure the base address is predictable */
base = pci_read_config32(SOC_LPC_DEV, SPIROM_BASE_ADDRESS_REGISTER); base = pci_read_config32(SOC_LPC_DEV, SPIROM_BASE_ADDRESS_REGISTER);
enables = base & 0xf; enables = base & SPI_PRESERVE_BITS;
base &= ~0x3f; base &= ~(SPI_PRESERVE_BITS | SPI_BASE_RESERVED);
if (!base) { if (!base) {
base = SPI_BASE_ADDRESS; base = SPI_BASE_ADDRESS;