From 4fcf57b7821bfc1d8f724605a26762d24d678402 Mon Sep 17 00:00:00 2001 From: Peichao Wang Date: Tue, 20 Aug 2019 07:53:23 +0800 Subject: [PATCH] mb/google/kahlee/treeya: Enable Synaptics touchpad and Synaptics touchscreen BUG=b:139699619 TEST=emerge-grunt coreboot chromeos-bootimage flash bios image to DUT and make sure the touchpad and touchscreen can work Signed-off-by: Peichao.Wang Change-Id: I002badd49e678e1c32c802352923ca51efb45cef Reviewed-on: https://review.coreboot.org/c/coreboot/+/35000 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth --- .../kahlee/variants/treeya/devicetree.cb | 23 +++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/src/mainboard/google/kahlee/variants/treeya/devicetree.cb b/src/mainboard/google/kahlee/variants/treeya/devicetree.cb index d73c47c6b8..eb76e945d7 100644 --- a/src/mainboard/google/kahlee/variants/treeya/devicetree.cb +++ b/src/mainboard/google/kahlee/variants/treeya/devicetree.cb @@ -138,10 +138,33 @@ chip soc/amd/stoneyridge register "desc" = ""ELAN Touchpad"" register "irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPIO_5)" register "wake" = "7" + register "probed" = "1" device i2c 15 on end end + chip drivers/i2c/hid + register "generic.hid" = ""PNP0C50"" + register "generic.desc" = ""Synaptics Touchpad"" + register "generic.irq_gpio" = "ACPI_GPIO_IRQ_EDGE_LOW(GPIO_5)" + register "generic.wake" = "7" + register "generic.probed" = "1" + register "hid_desc_reg_offset" = "0x20" + device i2c 0x2c on end + end end device mmio 0xfedc5000 on + chip drivers/i2c/hid + register "generic.hid" = ""SYTS7817"" + register "generic.desc" = ""Synaptics Touchscreen"" + register "generic.irq_gpio" = "ACPI_GPIO_IRQ_EDGE_LOW(GPIO_11)" + register "generic.probed" = "1" + register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_85)" + register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_76)" + register "generic.reset_delay_ms" = "45" + register "generic.has_power_resource" = "1" + register "generic.disable_gpio_export_in_crs" = "1" + register "hid_desc_reg_offset" = "0x20" + device i2c 20 on end + end chip drivers/i2c/generic register "hid" = ""RAYD0001"" register "desc" = ""Raydium Touchscreen""