diff --git a/src/vendorcode/intel/fsp/fsp2_0/apollolake/FspUpd.h b/src/vendorcode/intel/fsp/fsp2_0/apollolake/FspUpd.h index a7114ce39e..5f4cb66dd0 100644 --- a/src/vendorcode/intel/fsp/fsp2_0/apollolake/FspUpd.h +++ b/src/vendorcode/intel/fsp/fsp2_0/apollolake/FspUpd.h @@ -35,7 +35,7 @@ are permitted provided that the following conditions are met: #include -#pragma pack(push, 1) +#pragma pack(1) #define FSPT_UPD_SIGNATURE 0x545F4450554C5041 /* 'APLUPD_T' */ @@ -43,6 +43,6 @@ are permitted provided that the following conditions are met: #define FSPS_UPD_SIGNATURE 0x535F4450554C5041 /* 'APLUPD_S' */ -#pragma pack(pop) +#pragma pack() #endif diff --git a/src/vendorcode/intel/fsp/fsp2_0/apollolake/FspmUpd.h b/src/vendorcode/intel/fsp/fsp2_0/apollolake/FspmUpd.h index d2d2461fc4..d0620f5c0d 100644 --- a/src/vendorcode/intel/fsp/fsp2_0/apollolake/FspmUpd.h +++ b/src/vendorcode/intel/fsp/fsp2_0/apollolake/FspmUpd.h @@ -35,7 +35,7 @@ are permitted provided that the following conditions are met: #include -#pragma pack(push, 1) +#pragma pack(1) #define MAX_CHANNELS_NUM 4 @@ -202,21 +202,7 @@ typedef struct { **/ UINT8 ScramblerSupport; -/** Offset 0x0053 - ChannelHashMask - ChannelHashMask and SliceHashMask allow for the channel hashing algorithm to be - modified. These inputs are not used for configurations where an optimized ChannelHashMask - has been provided by the PnP validation teams. 0x00(Default). -**/ - UINT16 ChannelHashMask; - -/** Offset 0x0055 - SliceHashMask - ChannelHashMask and SliceHashMask allow for the channel hashing algorithm to be - modified. These inputs are not used for configurations where an optimized ChannelHashMask - has been provided by the PnP validation teams. 0x00(Default). -**/ - UINT16 SliceHashMask; - -/** Offset 0x0057 - InterleavedMode +/** Offset 0x0053 - InterleavedMode This field is ignored if one of the PnP channel configurations is used. If the memory configuration is different, then the field is used directly to populate. 0x00:Disable(Default), 0x02:Enable. @@ -224,6 +210,20 @@ typedef struct { **/ UINT8 InterleavedMode; +/** Offset 0x0054 - ChannelHashMask + ChannelHashMask and SliceHashMask allow for the channel hashing algorithm to be + modified. These inputs are not used for configurations where an optimized ChannelHashMask + has been provided by the PnP validation teams. 0x00(Default). +**/ + UINT16 ChannelHashMask; + +/** Offset 0x0056 - SliceHashMask + ChannelHashMask and SliceHashMask allow for the channel hashing algorithm to be + modified. These inputs are not used for configurations where an optimized ChannelHashMask + has been provided by the PnP validation teams. 0x00(Default). +**/ + UINT16 SliceHashMask; + /** Offset 0x0058 - ChannelsSlicesEnable ChannelSlicesEnable field is not used at all on BXTP. The Channel Slice Configuration is calculated internally based on the enabled channel configuration. 0x00:Disable(Default), @@ -265,20 +265,20 @@ typedef struct { **/ UINT16 LowMemoryMaxValue; -/** Offset 0x0060 - DisableFastBoot - 00:Disabled; Use saved training data (if valid) after first boot(Default), 01:Enabled; - Full re-train of memory on every boot. - $EN_DIS -**/ - UINT8 DisableFastBoot; - -/** Offset 0x0061 - HighMemoryMaxValue +/** Offset 0x0060 - HighMemoryMaxValue High Memory Max Value: This value is used to restrict the amount of memory above 4GB and the calculations based on it. Value is in MB. Example encodings are: 0x0400:1GB, 0x0800:2GB, 0x1000:4GB, 0x2000:8GB. 0x00(Default). **/ UINT16 HighMemoryMaxValue; +/** Offset 0x0062 - DisableFastBoot + 00:Disabled; Use saved training data (if valid) after first boot(Default), 01:Enabled; + Full re-train of memory on every boot. + $EN_DIS +**/ + UINT8 DisableFastBoot; + /** Offset 0x0063 - DIMM0SPDAddress DIMM0 SPD Address (NOTE: Only for DDR3L only. Please put 0 for MemoryDown. 0xA0(Default). **/ @@ -586,7 +586,12 @@ typedef struct { **/ UINT8 RmtCheckRun; -/** Offset 0x0086 - Ch0_Bit_swizzling +/** Offset 0x0086 - RmtMarginCheckScaleHighThreshold + Percentage used to determine the margin tolerances over the failing margin. +**/ + UINT16 RmtMarginCheckScaleHighThreshold; + +/** Offset 0x0088 - Ch0_Bit_swizzling Channel 0 PHY to DUnit DQ mapping (only used if not 1-1 mapping)Range: 0-32. Frequently asked questions: Q: The DQS (strobes) need to go with the corresponding byte lanes on the DDR module. Are the DQS being swapped around as well? Ans: Yes, DQ strobes @@ -612,26 +617,21 @@ typedef struct { **/ UINT8 Ch0_Bit_swizzling[32]; -/** Offset 0x00A6 - Ch1_Bit_swizzling +/** Offset 0x00A8 - Ch1_Bit_swizzling Channel 1 PHY to DUnit DQ mapping (only used if not 1-1 mapping)Range: 0-32. **/ UINT8 Ch1_Bit_swizzling[32]; -/** Offset 0x00C6 - Ch2_Bit_swizzling +/** Offset 0x00C8 - Ch2_Bit_swizzling Channel 2 PHY to DUnit DQ mapping (only used if not 1-1 mapping)Range: 0-32. **/ UINT8 Ch2_Bit_swizzling[32]; -/** Offset 0x00E6 - Ch3_Bit_swizzling +/** Offset 0x00E8 - Ch3_Bit_swizzling Channel 3 PHY to DUnit DQ mapping (only used if not 1-1 mapping)Range: 0-32. **/ UINT8 Ch3_Bit_swizzling[32]; -/** Offset 0x0106 - RmtMarginCheckScaleHighThreshold - Percentage used to determine the margin tolerances over the failing margin. -**/ - UINT16 RmtMarginCheckScaleHighThreshold; - /** Offset 0x0108 - MsgLevelMask 32 bits used to mask out debug messages. Masking out bit 0 mask all other messages. **/ @@ -639,64 +639,64 @@ typedef struct { /** Offset 0x010C **/ - UINT32 UnusedUpdSpace0; + UINT8 UnusedUpdSpace0[4]; -/** Offset 0x0110 - PreMem GPIO Table Entry Number. Currently maximum entry number is 4 - Number of Entries in PreMem GPIO Table. 0(Default). -**/ - UINT8 PreMemGpioTableEntryNum; - -/** Offset 0x0111 - PreMem GPIO Pin Number for each table +/** Offset 0x0110 - PreMem GPIO Pin Number for each table Number of Pins in each PreMem GPIO Table. 0(Default). **/ UINT8 PreMemGpioTablePinNum[4]; -/** Offset 0x0115 - PreMem GPIO Table Pointer +/** Offset 0x0114 - PreMem GPIO Table Pointer Pointer to Array of pointers to PreMem GPIO Table. 0x00000000(Default). **/ UINT32 PreMemGpioTablePtr; +/** Offset 0x0118 - PreMem GPIO Table Entry Number. Currently maximum entry number is 4 + Number of Entries in PreMem GPIO Table. 0(Default). +**/ + UINT8 PreMemGpioTableEntryNum; + /** Offset 0x0119 - Enhance the port 8xh decoding Enable/Disable Enhance the port 8xh decoding. 0:Disable, 1:Enable(Default). $EN_DIS **/ UINT8 EnhancePort8xhDecoding; -/** Offset 0x011A - OEM File Loading Address - Determine the memory base address to load a specified file from CSE file system - after memory is available. -**/ - UINT32 OemLoadingBase; - -/** Offset 0x011E - OEM File Name to Load - Specify a file name to load from CSE file system after memory is available. Empty - indicates no file needs to be loaded. -**/ - UINT8 OemFileName[16]; - -/** Offset 0x012E - SPD Data Write +/** Offset 0x011A - SPD Data Write Enable/Disable SPD data write on the SMBUS. 0x00:Disable(Default), 0x01:Enable. $EN_DIS **/ UINT8 SpdWriteEnable; -/** Offset 0x012F - MRC Training Data Saving +/** Offset 0x011B - MRC Training Data Saving Enable/Disable MRC training data saving in FSP. 0x00:Disable(Default), 0x01:Enable. $EN_DIS **/ UINT8 MrcDataSaving; -/** Offset 0x0130 - eMMC Trace Length +/** Offset 0x011C - OEM File Loading Address + Determine the memory base address to load a specified file from CSE file system + after memory is available. +**/ + UINT32 OemLoadingBase; + +/** Offset 0x0120 - OEM File Name to Load + Specify a file name to load from CSE file system after memory is available. Empty + indicates no file needs to be loaded. +**/ + UINT8 OemFileName[16]; + +/** Offset 0x0130 +**/ + VOID* MrcBootDataPtr; + +/** Offset 0x0134 - eMMC Trace Length Select eMMC trace length to load OEM file from when loading OEM file name is specified. 0x0:Long(Default), 0x1:Short. 0x0:Long, 0x1:Short **/ UINT8 eMMCTraceLen; -/** Offset 0x0131 -**/ - VOID* MrcBootDataPtr; - /** Offset 0x0135 - Skip CSE RBP to support zero sized IBB Enable/Disable skip CSE RBP for bootloader which loads IBB without assistance of CSE. 0x00:Disable(Default), 0x01:Enable. @@ -796,33 +796,41 @@ typedef struct { Enable FSP to trigger reset instead of returning reset request. 0x00: Return the Return Status from FSP if a reset is required. (default); 0x01: Perform Reset inside FSP instead of returning from the API. - 0x0:Disabled, 0x1:Enabled + 0x0:Disabled, 0x1:Eabled **/ UINT8 EnableResetSystem; /** Offset 0x014C - Enable HECI2 in S3 resume path Enable HECI2 in S3 resume path. 0x00: Skip HECI2 initialization in S3 resume. ; 0x01: Enable HECI2 in S3 resume path.(Default) - 0x0:Disabled, 0x1:Enabled + 0x0:Disabled, 0x1:Eabled **/ UINT8 EnableS3Heci2; /** Offset 0x014D **/ - UINT8 ReservedFspmUpd[3]; + UINT8 UnusedUpdSpace1[3]; + +/** Offset 0x0150 +**/ + VOID* VariableNvsBufferPtr; + +/** Offset 0x0154 +**/ + UINT8 ReservedFspmUpd[12]; } FSP_M_CONFIG; /** Fsp M Test Configuration **/ typedef struct { -/** Offset 0x0150 +/** Offset 0x0160 **/ UINT32 Signature; -/** Offset 0x0154 +/** Offset 0x0164 **/ - UINT8 ReservedFspmTestUpd[28]; + UINT8 ReservedFspmTestUpd[12]; } FSP_M_TEST_CONFIG; /** Fsp M Restricted Configuration @@ -835,7 +843,7 @@ typedef struct { /** Offset 0x0174 **/ - UINT8 ReservedFspmRestrictedUpd[138]; + UINT8 ReservedFspmRestrictedUpd[124]; } FSP_M_RESTRICTED_CONFIG; /** Fsp M UPD Configuration @@ -854,7 +862,7 @@ typedef struct { **/ FSP_M_CONFIG FspmConfig; -/** Offset 0x0150 +/** Offset 0x0160 **/ FSP_M_TEST_CONFIG FspmTestConfig; @@ -862,11 +870,15 @@ typedef struct { **/ FSP_M_RESTRICTED_CONFIG FspmRestrictedConfig; +/** Offset 0x01F0 +**/ + UINT8 UnusedUpdSpace2[14]; + /** Offset 0x01FE **/ UINT16 UpdTerminator; } FSPM_UPD; -#pragma pack(pop) +#pragma pack() #endif diff --git a/src/vendorcode/intel/fsp/fsp2_0/apollolake/FspsUpd.h b/src/vendorcode/intel/fsp/fsp2_0/apollolake/FspsUpd.h index 311980774b..8a4fe1a393 100644 --- a/src/vendorcode/intel/fsp/fsp2_0/apollolake/FspsUpd.h +++ b/src/vendorcode/intel/fsp/fsp2_0/apollolake/FspsUpd.h @@ -35,7 +35,7 @@ are permitted provided that the following conditions are met: #include -#pragma pack(push, 1) +#pragma pack(1) /** Fsp S Configuration @@ -118,74 +118,76 @@ typedef struct { **/ UINT8 PkgCStateLimit; -/** Offset 0x002D -**/ - UINT8 UnusedUpdSpace0; - -/** Offset 0x002E - C-State auto-demotion +/** Offset 0x002D - C-State auto-demotion C-State Auto Demotion. 0:Disable(Default) C1 and C3 Auto-demotion, 1:Enable C3/C6/C7 Auto-demotion to C1, 2:Enable C6/C7 Auto-demotion to C3, 3:Enable C6/C7 Auto-demotion to C1 and C3. **/ UINT8 CStateAutoDemotion; -/** Offset 0x002F - C-State un-demotion +/** Offset 0x002E - C-State un-demotion C-State un-demotion. 0:Disable(Default) C1 and C3 Un-demotion, 1:Enable C1 Un-demotion, 2:Enable C3 Un-demotion, 3:Enable C1 and C3 Un-demotion. **/ UINT8 CStateUnDemotion; -/** Offset 0x0030 - Max Core C-State +/** Offset 0x002F - Max Core C-State Max Core C-State. 0:Unlimited, 1:C1, 2:C3, 3:C6, 4:C7, 5:C8, 6:C9, 7:C10, 8:CCx(Default). **/ UINT8 MaxCoreCState; -/** Offset 0x0031 - Package C-State Demotion +/** Offset 0x0030 - Package C-State Demotion Enable or Disable Package Cstate Demotion. 0:Disable(Default), 1:Enable. $EN_DIS **/ UINT8 PkgCStateDemotion; -/** Offset 0x0032 - Package C-State Un-demotion +/** Offset 0x0031 - Package C-State Un-demotion Enable or Disable Package Cstate UnDemotion. 0:Disable(Default), 1:Enable. $EN_DIS **/ UINT8 PkgCStateUnDemotion; -/** Offset 0x0033 - Turbo Mode +/** Offset 0x0032 - Turbo Mode Enable or Disable long duration Turbo Mode. 0:Disable, 1:Enable(Default). $EN_DIS **/ UINT8 TurboMode; -/** Offset 0x0034 - SC HDA Verb Table Entry Number +/** Offset 0x0033 - SC HDA Verb Table Entry Number Number of Entries in Verb Table. 0(Default). **/ UINT8 HdaVerbTableEntryNum; -/** Offset 0x0035 - SC HDA Verb Table Pointer +/** Offset 0x0034 - SC HDA Verb Table Pointer Pointer to Array of pointers to Verb Table. 0x00000000(Default). **/ UINT32 HdaVerbTablePtr; -/** Offset 0x0039 - Enable/Disable P2SB device hidden. +/** Offset 0x0038 - Enable/Disable P2SB device hidden. Enable/Disable P2SB device hidden. 0:Disable(Default), 1:Enable. $EN_DIS **/ UINT8 P2sbUnhide; -/** Offset 0x003A - IPU Enable/Disable +/** Offset 0x0039 - IPU Enable/Disable Enable/Disable IPU Device. 0:Disable, 1:Enable(Default). $EN_DIS **/ UINT8 IpuEn; -/** Offset 0x003B - IMGU ACPI mode selection +/** Offset 0x003A - IMGU ACPI mode selection 0:Auto, 1:IGFX Child device(Default), 2:ACPI device. 0:Disable, 1:IGFX Child device, 2:ACPI device **/ UINT8 IpuAcpiMode; +/** Offset 0x003B - Enable ForceWake + Enable/disable ForceWake Models. 0:Disable(Default), 1:Enable. + $EN_DIS +**/ + UINT8 ForceWake; + /** Offset 0x003C - GttMmAdr GttMmAdr structure for initialization. 0xBF000000(Default). **/ @@ -196,358 +198,345 @@ typedef struct { **/ UINT32 GmAdr; -/** Offset 0x0044 - Enable ForceWake - Enable/disable ForceWake Models. 0:Disable(Default), 1:Enable. - $EN_DIS -**/ - UINT8 ForceWake; - -/** Offset 0x0045 - Enable PavpLock +/** Offset 0x0044 - Enable PavpLock Enable/disable PavpLock. 0:Disable(Default), 1:Enable. $EN_DIS **/ UINT8 PavpLock; -/** Offset 0x0046 - Enable GraphicsFreqModify +/** Offset 0x0045 - Enable GraphicsFreqModify Enable/disable GraphicsFreqModify. 0:Disable(Default), 1:Enable. $EN_DIS **/ UINT8 GraphicsFreqModify; -/** Offset 0x0047 - Enable GraphicsFreqReq +/** Offset 0x0046 - Enable GraphicsFreqReq Enable/disable GraphicsFreqReq. 0:Disable(Default), 1:Enable. $EN_DIS **/ UINT8 GraphicsFreqReq; -/** Offset 0x0048 - Enable GraphicsVideoFreq +/** Offset 0x0047 - Enable GraphicsVideoFreq Enable/disable GraphicsVideoFreq. 0:Disable(Default), 1:Enable. $EN_DIS **/ UINT8 GraphicsVideoFreq; -/** Offset 0x0049 - Enable PmLock +/** Offset 0x0048 - Enable PmLock Enable/disable PmLock. 0:Disable(Default), 1:Enable. $EN_DIS **/ UINT8 PmLock; -/** Offset 0x004A - Enable DopClockGating +/** Offset 0x0049 - Enable DopClockGating Enable/disable DopClockGating. 0:Disable(Default), 1:Enable. $EN_DIS **/ UINT8 DopClockGating; -/** Offset 0x004B - Enable UnsolicitedAttackOverride +/** Offset 0x004A - Enable UnsolicitedAttackOverride Enable/disable UnsolicitedAttackOverride. 0:Disable(Default), 1:Enable. $EN_DIS **/ UINT8 UnsolicitedAttackOverride; -/** Offset 0x004C - Enable WOPCMSupport +/** Offset 0x004B - Enable WOPCMSupport Enable/disable WOPCMSupport. 0:Disable(Default), 1:Enable. $EN_DIS **/ UINT8 WOPCMSupport; -/** Offset 0x004D - Enable WOPCMSize +/** Offset 0x004C - Enable WOPCMSize Enable/disable WOPCMSize. 0:Disable(Default), 1:Enable. $EN_DIS **/ UINT8 WOPCMSize; -/** Offset 0x004E - Enable PowerGating +/** Offset 0x004D - Enable PowerGating Enable/disable PowerGating. 0:Disable(Default), 1:Enable. $EN_DIS **/ UINT8 PowerGating; -/** Offset 0x004F - Enable UnitLevelClockGating +/** Offset 0x004E - Enable UnitLevelClockGating Enable/disable UnitLevelClockGating. 0:Disable(Default), 1:Enable. $EN_DIS **/ UINT8 UnitLevelClockGating; -/** Offset 0x0050 - Enable FastBoot +/** Offset 0x004F - Enable FastBoot Enable/disable FastBoot. 0:Disable(Default), 1:Enable. $EN_DIS **/ UINT8 FastBoot; -/** Offset 0x0051 - Enable DynSR +/** Offset 0x0050 - Enable DynSR Enable/disable DynSR. 0:Disable(Default), 1:Enable. $EN_DIS **/ UINT8 DynSR; -/** Offset 0x0052 - Enable SaIpuEnable +/** Offset 0x0051 - Enable SaIpuEnable Enable/disable SaIpuEnable. 0:Disable(Default), 1:Enable. $EN_DIS **/ UINT8 SaIpuEnable; -/** Offset 0x0053 - BMP Logo Data Size - BMP logo data buffer size. 0x00000000(Default). -**/ - UINT32 LogoSize; - -/** Offset 0x0057 - BMP Logo Data Pointer - BMP logo data pointer to a BMP format buffer. 0x00000000(Default). -**/ - UINT32 LogoPtr; - -/** Offset 0x005B - Graphics Configuration Data Pointer - Graphics configuration data used for initialization. 0x00000000(Default). -**/ - UINT32 GraphicsConfigPtr; - -/** Offset 0x005F - GT PM Support +/** Offset 0x0052 - GT PM Support Enable/Disable GT power management support. 0:Disable, 1:Enable(Default). $EN_DIS **/ UINT8 PmSupport; -/** Offset 0x0060 - RC6(Render Standby) +/** Offset 0x0053 - RC6(Render Standby) Enable/Disable render standby support. 0:Disable, 1:Enable(Default). $EN_DIS **/ UINT8 EnableRenderStandby; -/** Offset 0x0061 - PAVP Enable +/** Offset 0x0054 - BMP Logo Data Size + BMP logo data buffer size. 0x00000000(Default). +**/ + UINT32 LogoSize; + +/** Offset 0x0058 - BMP Logo Data Pointer + BMP logo data pointer to a BMP format buffer. 0x00000000(Default). +**/ + UINT32 LogoPtr; + +/** Offset 0x005C - Graphics Configuration Data Pointer + Graphics configuration data used for initialization. 0x00000000(Default). +**/ + UINT32 GraphicsConfigPtr; + +/** Offset 0x0060 - PAVP Enable Enable/Disable Protected Audio Visual Path (PAVP). 0:Disable, 1:Enable(Default). $EN_DIS **/ UINT8 PavpEnable; -/** Offset 0x0062 - PAVP PR3 +/** Offset 0x0061 - PAVP PR3 Enable/Disable PAVP PR3 0:Disable, 1:Enable(Default). $EN_DIS **/ UINT8 PavpPr3; -/** Offset 0x0063 - CdClock Frequency selection +/** Offset 0x0062 - CdClock Frequency selection 0:144MHz, 1:288MHz, 2:384MHz, 3:576MHz, 4:624MHz(Default). 0: 144 MHz, 1: 288 MHz, 2: 384 MHz, 3: 576 MHz, 4: 624 MHz **/ UINT8 CdClock; -/** Offset 0x0064 - Enable/Disable PeiGraphicsPeimInit +/** Offset 0x0063 - Enable/Disable PeiGraphicsPeimInit Enable/Disable PeiGraphicsPeimInit 0:Disable, 1:Enable(Default). $EN_DIS **/ UINT8 PeiGraphicsPeimInit; -/** Offset 0x0065 - Write Protection Support +/** Offset 0x0064 - Write Protection Support Enable/disable Write Protection. 0:Disable, 1:Enable(Default). **/ UINT8 WriteProtectionEnable[5]; -/** Offset 0x006A - Read Protection Support +/** Offset 0x0069 - Read Protection Support Enable/disable Read Protection. 0:Disable, 1:Enable(Default). **/ UINT8 ReadProtectionEnable[5]; -/** Offset 0x006F - Protected Range Limitation +/** Offset 0x006E - Protected Range Limitation The address of the upper limit of protection, 0x0FFFh(Default). **/ UINT16 ProtectedRangeLimit[5]; -/** Offset 0x0079 - Protected Range Base +/** Offset 0x0078 - Protected Range Base The base address of the upper limit of protection. 0x0000(Default). **/ UINT16 ProtectedRangeBase[5]; -/** Offset 0x0083 - Enable SC Gaussian Mixture Models +/** Offset 0x0082 - Enable SC Gaussian Mixture Models Enable/disable SC Gaussian Mixture Models. 0:Disable, 1:Enable(Default). $EN_DIS **/ UINT8 Gmm; -/** Offset 0x0084 - GMM Clock Gating - PGCB Clock Trunk +/** Offset 0x0083 - GMM Clock Gating - PGCB Clock Trunk Enable/disable PGCB Clock Trunk. 0:Disable, 1:Enable(Default). $EN_DIS **/ UINT8 ClkGatingPgcbClkTrunk; -/** Offset 0x0085 - GMM Clock Gating - Sideband +/** Offset 0x0084 - GMM Clock Gating - Sideband Enable/disable Sideband. 0:Disable, 1:Enable(Default). $EN_DIS **/ UINT8 ClkGatingSb; -/** Offset 0x0086 - GMM Clock Gating - Sideband +/** Offset 0x0085 - GMM Clock Gating - Sideband Enable/disable Sideband. 0:Disable, 1:Enable(Default). $EN_DIS **/ UINT8 ClkGatingSbClkTrunk; -/** Offset 0x0087 - GMM Clock Gating - Sideband Clock Partition +/** Offset 0x0086 - GMM Clock Gating - Sideband Clock Partition Enable/disable Sideband Clock Partition. 0:Disable, 1:Enable(Default). $EN_DIS **/ UINT8 ClkGatingSbClkPartition; -/** Offset 0x0088 - GMM Clock Gating - Core +/** Offset 0x0087 - GMM Clock Gating - Core Enable/disable Core. 0:Disable, 1:Enable(Default). $EN_DIS **/ UINT8 ClkGatingCore; -/** Offset 0x0089 - GMM Clock Gating - DMA +/** Offset 0x0088 - GMM Clock Gating - DMA Enable/disable DMA. 0:Disable, 1:Enable(Default). $EN_DIS **/ UINT8 ClkGatingDma; -/** Offset 0x008A - GMM Clock Gating - Register Access +/** Offset 0x0089 - GMM Clock Gating - Register Access Enable/disable Register Access. 0:Disable, 1:Enable(Default). $EN_DIS **/ UINT8 ClkGatingRegAccess; -/** Offset 0x008B - GMM Clock Gating - Host +/** Offset 0x008A - GMM Clock Gating - Host Enable/disable Host. 0:Disable, 1:Enable(Default). $EN_DIS **/ UINT8 ClkGatingHost; -/** Offset 0x008C - GMM Clock Gating - Partition +/** Offset 0x008B - GMM Clock Gating - Partition Enable/disable Partition. 0:Disable, 1:Enable(Default). $EN_DIS **/ UINT8 ClkGatingPartition; -/** Offset 0x008D - Clock Gating - Trunk +/** Offset 0x008C - Clock Gating - Trunk Enable/disable Trunk. 0:Disable, 1:Enable(Default). $EN_DIS **/ UINT8 ClkGatingTrunk; -/** Offset 0x008E - HD Audio Support +/** Offset 0x008D - HD Audio Support Enable/disable HDA Audio Feature. 0:Disable, 1:Enable(Default). $EN_DIS **/ UINT8 HdaEnable; -/** Offset 0x008F - HD Audio DSP Support +/** Offset 0x008E - HD Audio DSP Support Enable/disable HDA Audio DSP Feature. 0:Disable, 1:Enable(Default). $EN_DIS **/ UINT8 DspEnable; -/** Offset 0x0090 - Azalia wake-on-ring +/** Offset 0x008F - Azalia wake-on-ring Enable/disable Azalia wake-on-ring. 0:Disable(Default), 1:Enable. $EN_DIS **/ UINT8 Pme; -/** Offset 0x0091 - HD-Audio I/O Buffer Ownership +/** Offset 0x0090 - HD-Audio I/O Buffer Ownership Set HD-Audio I/O Buffer Ownership. 0:HD-Audio link owns all the I/O buffers(Default) 0:HD-Audio link owns all the I/O buffers, 1:HD-Audio link owns 4 I/O buffers and I2S port owns 4 I/O buffers, 3:I2S port owns all the I/O buffers **/ UINT8 HdAudioIoBufferOwnership; -/** Offset 0x0092 - HD-Audio I/O Buffer Voltage +/** Offset 0x0091 - HD-Audio I/O Buffer Voltage HD-Audio I/O Buffer Voltage Mode Selectiton . 0:3.3V(Default), 1:1.8V. 0: 3.3V, 1: 1.8V **/ UINT8 HdAudioIoBufferVoltage; -/** Offset 0x0093 - HD-Audio Virtual Channel Type +/** Offset 0x0092 - HD-Audio Virtual Channel Type HD-Audio Virtual Channel Type Selectiton. 0:VC0(Default), 1:VC1. 0: VC0, 1: VC1 **/ UINT8 HdAudioVcType; -/** Offset 0x0094 - HD-Audio Link Frequency +/** Offset 0x0093 - HD-Audio Link Frequency HD-Audio Virtual Channel Type Selectiton. 0:6MHz(Default), 1:12MHz, 2:24MHz, 3:48MHz, 4:96MHz, 5:Invalid. 0: 6MHz, 1: 12MHz, 2: 24MHz, 3: 48MHz, 4: 96MHz, 5: Invalid **/ UINT8 HdAudioLinkFrequency; -/** Offset 0x0095 - HD-Audio iDisp-Link Frequency +/** Offset 0x0094 - HD-Audio iDisp-Link Frequency HD-Audio iDisp-Link Frequency Selectiton. 0:6MHz(Default), 1:12MHz, 2:24MHz, 3:48MHz, 4:96MHz, 5:Invalid. 0: 6MHz, 1: 12MHz, 2: 24MHz, 3: 48MHz, 4: 96MHz, 5: Invalid **/ UINT8 HdAudioIDispLinkFrequency; -/** Offset 0x0096 - HD-Audio iDisp-Link T-Mode +/** Offset 0x0095 - HD-Audio iDisp-Link T-Mode HD-Audio iDisp-Link T-Mode Selectiton. 0:2T(Default), 1:1T. 0: 2T, 1: 1T **/ UINT8 HdAudioIDispLinkTmode; -/** Offset 0x0097 - HD-Audio Disp DMIC +/** Offset 0x0096 - HD-Audio Disp DMIC HD-Audio Disp DMIC Selectiton. 0:Disable, 1:2ch array(Default), 2:4ch array. 0: Disable, 1: 2ch array, 2: 4ch array **/ UINT8 DspEndpointDmic; -/** Offset 0x0098 - HD-Audio Bluetooth +/** Offset 0x0097 - HD-Audio Bluetooth Enable/Disable HD-Audio bluetooth. 0:Disable, 1:Enable(Default). $EN_DIS **/ UINT8 DspEndpointBluetooth; -/** Offset 0x0099 - HD-Audio I2S SHK +/** Offset 0x0098 - HD-Audio I2S SHK Enable/Disable HD-Audio I2S SHK. 0:Disable(Default), 1:Enable. $EN_DIS **/ UINT8 DspEndpointI2sSkp; -/** Offset 0x009A - HD-Audio I2S HP +/** Offset 0x0099 - HD-Audio I2S HP Enable/Disable HD-Audio I2S HP. 0:Disable(Default), 1:Enable. $EN_DIS **/ UINT8 DspEndpointI2sHp; -/** Offset 0x009B - HD-Audio Controller Power Gating +/** Offset 0x009A - HD-Audio Controller Power Gating Enable/Disable HD-Audio Controller Power Gating. This option is deprecated. $EN_DIS **/ UINT8 AudioCtlPwrGate; -/** Offset 0x009C - HD-Audio ADSP Power Gating +/** Offset 0x009B - HD-Audio ADSP Power Gating Enable/Disable HD-Audio ADSP Power Gating. This option is deprecated. $EN_DIS **/ UINT8 AudioDspPwrGate; -/** Offset 0x009D - HD-Audio CSME Memory Transfers +/** Offset 0x009C - HD-Audio CSME Memory Transfers Enable/Disable HD-Audio CSME Memory Transfers. 0:VC0(Default), 1:VC2. 0: VC0, 1: VC2 **/ UINT8 Mmt; -/** Offset 0x009E - HD-Audio Host Memory Transfers +/** Offset 0x009D - HD-Audio Host Memory Transfers Enable/Disable HD-Audio Host Memory Transfers. 0:VC0(Default), 1:VC2. 0: VC0, 1: VC2 **/ UINT8 Hmt; -/** Offset 0x009F - HD-Audio BIOS Configuration Lock Down - Enable/Disable HD-Audio BIOS Configuration Lock Down. 0:Disable(Default), 1:Enable. - This option is deprecated - $EN_DIS -**/ - UINT8 BiosCfgLockDown; - -/** Offset 0x00A0 - HD-Audio Power Gating +/** Offset 0x009E - HD-Audio Power Gating Enable/Disable HD-Audio BIOS Configuration Lock Down. 0:Disable(Default), 1:Enable. $EN_DIS **/ UINT8 HDAudioPwrGate; -/** Offset 0x00A1 - HD-Audio Clock Gatingn +/** Offset 0x009F - HD-Audio Clock Gatingn Enable/Disable HD-Audio Clock Gating. 0:Disable(Default), 1:Enable. $EN_DIS **/ UINT8 HDAudioClkGate; -/** Offset 0x00A2 - Bitmask of DSP Feature +/** Offset 0x00A0 - Bitmask of DSP Feature Set Bitmask of HD-Audio DSP Feature. 0x00000000(Default). [BIT0] - WoV, [BIT1] - BT Sideband, [BIT2] - Codec VAD, [BIT5] - BT Intel HFP, [BIT6] - BT Intel A2DP, [BIT7] - DSP based speech pre-processing disabled, [BIT8] - 0: @@ -555,7 +544,7 @@ typedef struct { **/ UINT32 DspFeatureMask; -/** Offset 0x00A6 - Bitmask of supported DSP Post-Processing Modules +/** Offset 0x00A4 - Bitmask of supported DSP Post-Processing Modules Set HD-Audio Bitmask of supported DSP Post-Processing Modules. 0x00000000(Default). [BIT0] - WoV, [BIT1] - BT Sideband, [BIT2] - Codec VAD, [BIT5] - BT Intel HFP, [BIT6] - BT Intel A2DP, [BIT7] - DSP based speech pre-processing disabled, [BIT8] - 0: @@ -563,505 +552,524 @@ typedef struct { **/ UINT32 DspPpModuleMask; -/** Offset 0x00AA - Enable High Precision Timer +/** Offset 0x00A8 - HD-Audio BIOS Configuration Lock Down + Enable/Disable HD-Audio BIOS Configuration Lock Down. 0:Disable(Default), 1:Enable. + This option is deprecated + $EN_DIS +**/ + UINT8 BiosCfgLockDown; + +/** Offset 0x00A9 - Enable High Precision Timer Enable/Disable Hpet. 0:Disable, 1:Enable(Default). $EN_DIS **/ UINT8 Hpet; -/** Offset 0x00AB - Hpet Valid BDF Value +/** Offset 0x00AA - Hpet Valid BDF Value Enable/Disable Hpet Valid BDF Value. 0:Disable(Default), 1:Enable. $EN_DIS **/ UINT8 HpetBdfValid; -/** Offset 0x00AC - Bus Number of Hpet +/** Offset 0x00AB - Bus Number of Hpet Completer ID of Bus Number of Hpet. Default = 0xFA(Default). **/ UINT8 HpetBusNumber; -/** Offset 0x00AD - Device Number of Hpet +/** Offset 0x00AC - Device Number of Hpet Completer ID of Device Number of Hpet. 0x1F(Default). **/ UINT8 HpetDeviceNumber; -/** Offset 0x00AE - Function Number of Hpet +/** Offset 0x00AD - Function Number of Hpet Completer ID of Function Number of Hpet. 0x00(Default). **/ UINT8 HpetFunctionNumber; -/** Offset 0x00AF -**/ - UINT32 UnusedUpdSpace1; - -/** Offset 0x00B3 - IoApic Valid BDF Value +/** Offset 0x00AE - IoApic Valid BDF Value Enable/Disable IoApic Valid BDF Value. 0:Disable(Default), 1:Enable. $EN_DIS **/ UINT8 IoApicBdfValid; -/** Offset 0x00B4 - Bus Number of IoApic +/** Offset 0x00AF - Bus Number of IoApic Completer ID of Bus Number of IoApic. 0xFA(Default). **/ UINT8 IoApicBusNumber; -/** Offset 0x00B5 - Device Number of IoApic +/** Offset 0x00B0 - Device Number of IoApic Completer ID of Device Number of IoApic. 0x0F(Default). **/ UINT8 IoApicDeviceNumber; -/** Offset 0x00B6 - Function Number of IoApic +/** Offset 0x00B1 - Function Number of IoApic Completer ID of Function Number of IoApic. 0x00(Default). **/ UINT8 IoApicFunctionNumber; -/** Offset 0x00B7 - IOAPIC Entry 24-119 +/** Offset 0x00B2 - IOAPIC Entry 24-119 Enable/Disable IOAPIC Entry 24-119. 0:Disable, 1:Enable(Default). $EN_DIS **/ UINT8 IoApicEntry24_119; -/** Offset 0x00B8 - IO APIC ID +/** Offset 0x00B3 - IO APIC ID This member determines IOAPIC ID. 0x01(Default). **/ UINT8 IoApicId; -/** Offset 0x00B9 - IoApic Range +/** Offset 0x00B4 - IoApic Range Define address bits 19:12 for the IOxAPIC range. 0x00(Default). **/ UINT8 IoApicRangeSelect; -/** Offset 0x00BA - ISH Controller +/** Offset 0x00B5 - ISH Controller Enable/Disable ISH Controller. 0:Disable, 1:Enable(Default). $EN_DIS **/ UINT8 IshEnable; -/** Offset 0x00BB - BIOS Interface Lock Down +/** Offset 0x00B6 - BIOS Interface Lock Down Enable/Disable BIOS Interface Lock Down bit to prevent writes to the Backup Control Register. 0:Disable, 1:Enable(Default). $EN_DIS **/ UINT8 BiosInterface; -/** Offset 0x00BC - Bios LockDown Enable +/** Offset 0x00B7 - Bios LockDown Enable Enable the BIOS Lock Enable (BLE) feature and set EISS bit. 0:Disable(Default), 1:Enable. $EN_DIS **/ UINT8 BiosLock; -/** Offset 0x00BD - SPI EISS Status +/** Offset 0x00B8 - SPI EISS Status Enable/Disable InSMM.STS (EISS) in SPI. 0:Disable, 1:Enable(Default). $EN_DIS **/ UINT8 SpiEiss; -/** Offset 0x00BE - BiosLock SWSMI Number +/** Offset 0x00B9 - BiosLock SWSMI Number This member describes the SwSmi value for Bios Lock. 0xA9(Default). **/ UINT8 BiosLockSwSmiNumber; -/** Offset 0x00BF - LPSS IOSF PMCTL S0ix Enable +/** Offset 0x00BA - LPSS IOSF PMCTL S0ix Enable Enable/Disable LPSS IOSF Bridge PMCTL Register S0ix Bits. 0:Disable(Default), 1:Enable. $EN_DIS **/ UINT8 LPSS_S0ixEnable; -/** Offset 0x00C0 - LPSS I2C Clock Gating Configuration +/** Offset 0x00BB +**/ + UINT8 UnusedUpdSpace0[1]; + +/** Offset 0x00BC - LPSS I2C Clock Gating Configuration Enable/Disable LPSS I2C Clock Gating. 0:Disable, 1:Enable(Default). **/ UINT8 I2cClkGateCfg[8]; -/** Offset 0x00C8 - PSS HSUART Clock Gating Configuration +/** Offset 0x00C4 - PSS HSUART Clock Gating Configuration Enable/Disable LPSS HSUART Clock Gating. 0:Disable, 1:Enable(Default). **/ UINT8 HsuartClkGateCfg[4]; -/** Offset 0x00CC - LPSS SPI Clock Gating Configuration +/** Offset 0x00C8 - LPSS SPI Clock Gating Configuration Enable/Disable LPSS SPI Clock Gating. 0:Disable, 1:Enable(Default). **/ UINT8 SpiClkGateCfg[3]; -/** Offset 0x00CF - I2C Device 0 +/** Offset 0x00CB - I2C Device 0 Enable/Disable I2C Device 0. 0:Disabled, 1:PCI Mode(Default), 2:ACPI Mode. 0: Disabled, 1: PCI Mode, 2: ACPI Mode **/ UINT8 I2c0Enable; -/** Offset 0x00D0 - I2C Device 1 +/** Offset 0x00CC - I2C Device 1 Enable/Disable I2C Device 1. 0:Disabled, 1:PCI Mode(Default), 2:ACPI Mode. 0: Disabled, 1: PCI Mode, 2: ACPI Mode **/ UINT8 I2c1Enable; -/** Offset 0x00D1 - I2C Device 2 +/** Offset 0x00CD - I2C Device 2 Enable/Disable I2C Device 2. 0:Disabled, 1:PCI Mode(Default), 2:ACPI Mode. 0: Disabled, 1: PCI Mode, 2: ACPI Mode **/ UINT8 I2c2Enable; -/** Offset 0x00D2 - I2C Device 3 +/** Offset 0x00CE - I2C Device 3 Enable/Disable I2C Device 3. 0:Disabled, 1:PCI Mode(Default), 2:ACPI Mode. 0: Disabled, 1: PCI Mode, 2: ACPI Mode **/ UINT8 I2c3Enable; -/** Offset 0x00D3 - I2C Device 4 +/** Offset 0x00CF - I2C Device 4 Enable/Disable I2C Device 4. 0:Disabled, 1:PCI Mode(Default), 2:ACPI Mode. 0: Disabled, 1: PCI Mode, 2: ACPI Mode **/ UINT8 I2c4Enable; -/** Offset 0x00D4 - I2C Device 5 +/** Offset 0x00D0 - I2C Device 5 Enable/Disable I2C Device 5. 0:Disabled, 1:PCI Mode(Default), 2:ACPI Mode. 0: Disabled, 1: PCI Mode, 2: ACPI Mode **/ UINT8 I2c5Enable; -/** Offset 0x00D5 - I2C Device 6 +/** Offset 0x00D1 - I2C Device 6 Enable/Disable I2C Device 6. 0:Disabled, 1:PCI Mode(Default), 2:ACPI Mode. 0: Disabled, 1: PCI Mode, 2: ACPI Mode **/ UINT8 I2c6Enable; -/** Offset 0x00D6 - I2C Device 7 +/** Offset 0x00D2 - I2C Device 7 Enable/Disable I2C Device 7. 0:Disabled, 1:PCI Mode(Default), 2:ACPI Mode. 0: Disabled, 1: PCI Mode, 2: ACPI Mode **/ UINT8 I2c7Enable; -/** Offset 0x00D7 - UART Device 0 +/** Offset 0x00D3 - UART Device 0 Enable/Disable UART Device 0. 0:Disabled, 1:PCI Mode(Default), 2:ACPI Mode. 0: Disabled, 1: PCI Mode, 2: ACPI Mode **/ UINT8 Hsuart0Enable; -/** Offset 0x00D8 - UART Device 1 +/** Offset 0x00D4 - UART Device 1 Enable/Disable UART Device 1. 0:Disabled, 1:PCI Mode(Default), 2:ACPI Mode. 0: Disabled, 1: PCI Mode, 2: ACPI Mode **/ UINT8 Hsuart1Enable; -/** Offset 0x00D9 - UART Device 2 +/** Offset 0x00D5 - UART Device 2 Enable/Disable UART Device 2. 0:Disabled, 1:PCI Mode(Default), 2:ACPI Mode. 0: Disabled, 1: PCI Mode, 2: ACPI Mode **/ UINT8 Hsuart2Enable; -/** Offset 0x00DA - UART Device 3 +/** Offset 0x00D6 - UART Device 3 Enable/Disable UART Device 3. 0:Disabled, 1:PCI Mode(Default), 2:ACPI Mode. 0: Disabled, 1: PCI Mode, 2: ACPI Mode **/ UINT8 Hsuart3Enable; -/** Offset 0x00DB - SPI UART Device 0 +/** Offset 0x00D7 - SPI UART Device 0 Enable/Disable SPI Device 0. 0:Disabled, 1:PCI Mode(Default), 2:ACPI Mode. 0: Disabled, 1: PCI Mode, 2: ACPI Mode **/ UINT8 Spi0Enable; -/** Offset 0x00DC - SPI UART Device 1 +/** Offset 0x00D8 - SPI UART Device 1 Enable/Disable SPI Device 1. 0:Disabled, 1:PCI Mode(Default), 2:ACPI Mode. 0: Disabled, 1: PCI Mode, 2: ACPI Mode **/ UINT8 Spi1Enable; -/** Offset 0x00DD - SPI UART Device 2 +/** Offset 0x00D9 - SPI UART Device 2 Enable/Disable SPI Device 2. 0:Disabled, 1:PCI Mode(Default), 2:ACPI Mode. 0: Disabled, 1: PCI Mode, 2: ACPI Mode **/ UINT8 Spi2Enable; -/** Offset 0x00DE - UART Debug Base Address - UART Debug Base Address. 0x00000000(Default). -**/ - UINT32 Uart2KernelDebugBaseAddress; - -/** Offset 0x00E2 - OS Debug Feature +/** Offset 0x00DA - OS Debug Feature Enable/Disable OS Debug Feature. 0:Disable(Default), 1: Enable. $EN_DIS **/ UINT8 OsDbgEnable; -/** Offset 0x00E3 - DCI Feature +/** Offset 0x00DB - DCI Feature Enable/Disable DCI Feature. 0:Disable(Default), 1: Enable. $EN_DIS **/ UINT8 DciEn; -/** Offset 0x00E4 - Enable PCIE Clock Gating +/** Offset 0x00DC - UART Debug Base Address + UART Debug Base Address. 0x00000000(Default). +**/ + UINT32 Uart2KernelDebugBaseAddress; + +/** Offset 0x00E0 - Enable PCIE Clock Gating Enable/disable PCIE Clock Gating. 0:Enable, 1:Disable(Default). 0:Enable, 1:Disable **/ UINT8 PcieClockGatingDisabled; -/** Offset 0x00E5 - Enable PCIE Root Port 8xh Decode +/** Offset 0x00E1 - Enable PCIE Root Port 8xh Decode Enable/disable PCIE Root Port 8xh Decode. 0:Disable, 1:Enable(Default). $EN_DIS **/ UINT8 PcieRootPort8xhDecode; -/** Offset 0x00E6 - PCIE 8xh Decode Port Index +/** Offset 0x00E2 - PCIE 8xh Decode Port Index PCIE 8xh Decode Port Index. 0x00(Default). **/ UINT8 Pcie8xhDecodePortIndex; -/** Offset 0x00E7 - Enable PCIE Root Port Peer Memory Write +/** Offset 0x00E3 - Enable PCIE Root Port Peer Memory Write Enable/disable PCIE root port peer memory write. 0:Disable(Default), 1:Enable. $EN_DIS **/ UINT8 PcieRootPortPeerMemoryWriteEnable; -/** Offset 0x00E8 - PCIE SWSMI Number +/** Offset 0x00E4 - PCIE SWSMI Number This member describes the SwSmi value for override PCIe ASPM table. 0xAA(Default). **/ UINT8 PcieAspmSwSmiNumber; -/** Offset 0x00E9 - PCI Express Root Port +/** Offset 0x00E5 +**/ + UINT8 UnusedUpdSpace1[1]; + +/** Offset 0x00E6 - PCI Express Root Port Control the PCI Express Root Port . 0:Disable, 1:Enable(Default). **/ UINT8 PcieRootPortEn[6]; -/** Offset 0x00EF - Hide PCIE Root Port Configuration Space +/** Offset 0x00EC - Hide PCIE Root Port Configuration Space Enable/disable Hide PCIE Root Port Configuration Space. 0:Disable(Default), 1:Enable. **/ UINT8 PcieRpHide[6]; -/** Offset 0x00F5 - PCIE Root Port Slot Implement +/** Offset 0x00F2 - PCIE Root Port Slot Implement Enable/disable PCIE Root Port Slot Implement. 0:Disable, 1:Enable(Default). **/ UINT8 PcieRpSlotImplemented[6]; -/** Offset 0x00FB - Hot Plug +/** Offset 0x00F8 - Hot Plug PCI Express Hot Plug Enable/Disable. 0:Disable, 1:Enable(Default). **/ UINT8 PcieRpHotPlug[6]; -/** Offset 0x0101 - PCIE PM SCI +/** Offset 0x00FE - PCIE PM SCI Enable/Disable PCI Express PME SCI. 0:Disable(Default), 1:Enable. **/ UINT8 PcieRpPmSci[6]; -/** Offset 0x0107 - PCIE Root Port Extended Sync +/** Offset 0x0104 - PCIE Root Port Extended Sync Enable/Disable PCIE Root Port Extended Sync. 0:Disable, 1:Enable(Default). **/ UINT8 PcieRpExtSync[6]; -/** Offset 0x010D - Transmitter Half Swing +/** Offset 0x010A - Transmitter Half Swing Transmitter Half Swing Enable/Disable. 0:Disable, 1:Enable(Default). **/ UINT8 PcieRpTransmitterHalfSwing[6]; -/** Offset 0x0113 - ACS +/** Offset 0x0110 - ACS Enable/Disable Access Control Services Extended Capability. 0:Disable, 1:Enable(Default). **/ UINT8 PcieRpAcsEnabled[6]; -/** Offset 0x0119 - Clock Request Support +/** Offset 0x0116 - Clock Request Support Enable/Disable CLKREQ# Support. 0:Disable, 1:Enable(Default). **/ UINT8 PcieRpClkReqSupported[6]; -/** Offset 0x011F - Configure CLKREQ Number +/** Offset 0x011C - Configure CLKREQ Number Configure Root Port CLKREQ Number if CLKREQ is supported. Default=0x04, 0x05, 0x00, 0x01, 0x02, 0x03. **/ UINT8 PcieRpClkReqNumber[6]; -/** Offset 0x0125 - CLKREQ# Detection +/** Offset 0x0122 - CLKREQ# Detection Enable/Disable CLKREQ# Detection Probe. 0: Disable(Default), 1: Enable. **/ UINT8 PcieRpClkReqDetect[6]; -/** Offset 0x012B - Advanced Error Reporting +/** Offset 0x0128 - Advanced Error Reporting Enable/Disable Advanced Error Reporting. 0: Disable(Default), 1: Enable. **/ UINT8 AdvancedErrorReporting[6]; -/** Offset 0x0131 - PME Interrupt +/** Offset 0x012E - PME Interrupt Enable/Disable PME Interrupt. 0: Disable(Default), 1: Enable. **/ UINT8 PmeInterrupt[6]; -/** Offset 0x0137 - URR +/** Offset 0x0134 - URR PCI Express Unsupported Request Reporting Enable/Disable. 0:Disable(Default), 1:Enable. **/ UINT8 UnsupportedRequestReport[6]; -/** Offset 0x013D - FER +/** Offset 0x013A - FER PCI Express Device Fatal Error Reporting Enable/Disable. 0:Disable(Default), 1:Enable. **/ UINT8 FatalErrorReport[6]; -/** Offset 0x0143 - NFER +/** Offset 0x0140 - NFER PCI Express Device Non-Fatal Error Reporting Enable/Disable. 0:Disable(Default), 1:Enable. **/ UINT8 NoFatalErrorReport[6]; -/** Offset 0x0149 - CER +/** Offset 0x0146 - CER PCI Express Device Correctable Error Reporting Enable/Disable. 0:Disable(Default), 1:Enable. **/ UINT8 CorrectableErrorReport[6]; -/** Offset 0x014F - SEFE +/** Offset 0x014C - SEFE Root PCI Express System Error on Fatal Error Enable/Disable. 0:Disable(Default), 1:Enable. **/ UINT8 SystemErrorOnFatalError[6]; -/** Offset 0x0155 - SENFE +/** Offset 0x0152 - SENFE Root PCI Express System Error on Non-Fatal Error Enable/Disable. 0:Disable(Default), 1:Enable. **/ UINT8 SystemErrorOnNonFatalError[6]; -/** Offset 0x015B - SECE +/** Offset 0x0158 - SECE Root PCI Express System Error on Correctable Error Enable/Disable. 0:Disable(Default), 1:Enable. **/ UINT8 SystemErrorOnCorrectableError[6]; -/** Offset 0x0161 - PCIe Speed +/** Offset 0x015E - PCIe Speed Configure PCIe Speed. 0:Auto(Default), 1:Gen1, 2:Gen2, 3:Gen3. **/ UINT8 PcieRpSpeed[6]; -/** Offset 0x0167 - Physical Slot Number +/** Offset 0x0164 - Physical Slot Number Physical Slot Number for PCIE Root Port. Default=0x00, 0x01, 0x02, 0x03, 0x04, 0x05. **/ UINT8 PhysicalSlotNumber[6]; -/** Offset 0x016D - CTO +/** Offset 0x016A - CTO Enable/Disable PCI Express Completion Timer TO . 0:Disable(Default), 1:Enable. **/ UINT8 PcieRpCompletionTimeout[6]; -/** Offset 0x0173 - PTM Support +/** Offset 0x0170 - PTM Support Enable/Disable PTM Support. 0:Disable(Default), 1:Enable. **/ UINT8 PtmEnable[6]; -/** Offset 0x0179 - ASPM +/** Offset 0x0176 - ASPM PCI Express Active State Power Management settings. 0:Disable, 1:L0s, 2:L1, 3:L0sL1, 4:Auto(Default). **/ UINT8 PcieRpAspm[6]; -/** Offset 0x017F - L1 Substates +/** Offset 0x017C - L1 Substates PCI Express L1 Substates settings. 0:Disable, 1:L1.1, 2:L1.2, 3:L1.1 & L1.2(Default). **/ UINT8 PcieRpL1Substates[6]; -/** Offset 0x0185 - PCH PCIe LTR +/** Offset 0x0182 - PCH PCIe LTR PCH PCIE Latency Reporting Enable/Disable. 0:Disable, 1:Enable(Default). **/ UINT8 PcieRpLtrEnable[6]; -/** Offset 0x018B - PCIE LTR Lock +/** Offset 0x0188 - PCIE LTR Lock PCIE LTR Configuration Lock. 0:Disable(Default), 1:Enable. **/ UINT8 PcieRpLtrConfigLock[6]; -/** Offset 0x0191 - PME_B0_S5 Disable bit +/** Offset 0x018E - PME_B0_S5 Disable bit PME_B0_S5_DIS bit in the General PM Configuration B (GEN_PMCON_B) register. 0:Disable(Default), 1:Enable. $EN_DIS **/ UINT8 PmeB0S5Dis; -/** Offset 0x0192 - PCI Clock Run +/** Offset 0x018F - PCI Clock Run This member describes whether or not the PCI ClockRun feature of SC should be enabled. 0:Disable(Default), 1:Enable. $EN_DIS **/ UINT8 PciClockRun; -/** Offset 0x0193 - Enable/Disable Timer 8254 Clock Setting +/** Offset 0x0190 - Enable/Disable Timer 8254 Clock Setting Enable/Disable Timer 8254 Clock. 0:Disable(Default), 1:Enable. $EN_DIS **/ UINT8 Timer8254ClkSetting; -/** Offset 0x0194 - Chipset SATA +/** Offset 0x0191 - Chipset SATA Enables or Disables the Chipset SATA Controller. The Chipset SATA controller supports the 2 black internal SATA ports (up to 3Gb/s supported per port). 0:Disable, 1:Enable(Default). $EN_DIS **/ UINT8 EnableSata; -/** Offset 0x0195 - SATA Mode Selection +/** Offset 0x0192 - SATA Mode Selection Determines how SATA controller(s) operate. 0:AHCI(Default), 1:RAID. 0:AHCI, 1:RAID **/ UINT8 SataMode; -/** Offset 0x0196 - Aggressive LPM Support +/** Offset 0x0193 - Aggressive LPM Support Enable PCH to aggressively enter link power state. 0:Disable, 1:Enable(Default). $EN_DIS **/ UINT8 SataSalpSupport; -/** Offset 0x0197 - SATA Power Optimization +/** Offset 0x0194 - SATA Power Optimization Enable SATA Power Optimizer on SC side. 0:Disable(Default), 1:Enable. $EN_DIS **/ UINT8 SataPwrOptEnable; -/** Offset 0x0198 - eSATA Speed Limit +/** Offset 0x0195 - eSATA Speed Limit Enable/Disable eSATA Speed Limit. 0:Disable(Default), 1:Enable. $EN_DIS **/ UINT8 eSATASpeedLimit; -/** Offset 0x0199 - SATA Speed Limit +/** Offset 0x0196 - SATA Speed Limit SATA Speed Limit. 0h:ScSataSpeed(Default), 1h:1.5Gb/s(Gen 1), 2h:3Gb/s(Gen 2), 3h:6Gb/s(Gen 3). 0:Default, 1: 1.5 Gb/s (Gen 1), 2: 3 Gb/s(Gen 2), 3: 6 Gb/s (Gen 1) **/ UINT8 SpeedLimit; -/** Offset 0x019A - SATA Port +/** Offset 0x0197 +**/ + UINT8 UnusedUpdSpace2[1]; + +/** Offset 0x0198 - SATA Port Enable or Disable SATA Port. 0:Disable, 1:Enable(Default). **/ UINT8 SataPortsEnable[2]; -/** Offset 0x019C - SATA Port DevSlp +/** Offset 0x019A - SATA Port DevSlp Enable/Disable SATA Port DevSlp. Board rework for LP needed before enable. 0:Disable(Default), 1:Enable. **/ UINT8 SataPortsDevSlp[2]; -/** Offset 0x019E - SATA Port HotPlug +/** Offset 0x019C - SATA Port HotPlug Enable/Disable SATA Port Hotplug . 0:Disable(Default), 1:Enable. **/ UINT8 SataPortsHotPlug[2]; -/** Offset 0x01A0 - Mechanical Presence Switch +/** Offset 0x019E - Mechanical Presence Switch Controls reporting if this port has an Mechanical Presence Switch.\n Note:Requires hardware support. 0:Disable, 1:Enable(Default). **/ UINT8 SataPortsInterlockSw[2]; -/** Offset 0x01A2 - External SATA Ports +/** Offset 0x01A0 - External SATA Ports Enable/Disable External SATA Ports. 0:Disable(Default), 1:Enable. **/ UINT8 SataPortsExternal[2]; -/** Offset 0x01A4 - Spin Up Device +/** Offset 0x01A2 - Spin Up Device Enable/Disable device spin up at boot on selected Sata Ports. 0:Disable(Default), 1:Enable. **/ UINT8 SataPortsSpinUp[2]; -/** Offset 0x01A6 - SATA Solid State +/** Offset 0x01A4 - SATA Solid State Identify the SATA port is connected to Solid State Drive or Hard Disk Drive. 0:Hard Disk Drive(Default), 1:Solid State Drive. **/ UINT8 SataPortsSolidStateDrive[2]; -/** Offset 0x01A8 - DITO Configuration +/** Offset 0x01A6 - DITO Configuration Enable/Disable DITO Configuration. 0:Disable(Default), 1:Enable. **/ UINT8 SataPortsEnableDitoConfig[2]; -/** Offset 0x01AA - DM Value +/** Offset 0x01A8 - DM Value DM Value. 0:Minimum, 0x0F:Maximum(Default). **/ UINT8 SataPortsDmVal[2]; +/** Offset 0x01AA +**/ + UINT8 UnusedUpdSpace3[2]; + /** Offset 0x01AC - DITO Value DEVSLP Idle Timeout Value. 0:Minimum, 0x03FF:Maximum, 0x0271(Default). **/ @@ -1077,212 +1085,212 @@ typedef struct { **/ UINT16 SubSystemId; -/** Offset 0x01B4 -**/ - UINT8 UnusedUpdSpace2[10]; - -/** Offset 0x01BE - CRIDSettings +/** Offset 0x01B4 - CRIDSettings PMC CRID setting. 0:Disable(Default), 1:CRID_1, 2:CRID_2, 3:CRID_3. **/ UINT8 CRIDSettings; -/** Offset 0x01BF - ResetSelect +/** Offset 0x01B5 - ResetSelect ResetSelect. 0x6:warm reset(Default), 0xE:cold reset. **/ UINT8 ResetSelect; -/** Offset 0x01C0 - SD Card Support (D27:F0) +/** Offset 0x01B6 - SD Card Support (D27:F0) Enable/Disable SD Card Support. 0:Disable, 1:Enable(Default). $EN_DIS **/ UINT8 SdcardEnabled; -/** Offset 0x01C1 - SeMMC Support (D28:F0) +/** Offset 0x01B7 - SeMMC Support (D28:F0) Enable/Disable eMMC Support. 0:Disable, 1:Enable(Default). $EN_DIS **/ UINT8 eMMCEnabled; -/** Offset 0x01C2 - eMMC Max Speed +/** Offset 0x01B8 - eMMC Max Speed Select the eMMC max Speed allowed. 0:HS400(Default), 1:HS200, 2:DDR50. 0:HS400, 1: HS200, 2:DDR50 **/ UINT8 eMMCHostMaxSpeed; -/** Offset 0x01C3 - UFS Support (D29:F0) +/** Offset 0x01B9 - UFS Support (D29:F0) Enable/Disable SDIO Support. 0:Disable, 1:Enable(Default). $EN_DIS **/ UINT8 UfsEnabled; -/** Offset 0x01C4 - SDIO Support (D30:F0) +/** Offset 0x01BA - SDIO Support (D30:F0) Enable/Disable SDIO Support. 0:Disable, 1:Enable(Default). $EN_DIS **/ UINT8 SdioEnabled; -/** Offset 0x01C5 - GPP Lock Feature +/** Offset 0x01BB - GPP Lock Feature Enable/Disable GPP lock. 0:Disable(Default), 1:Enable. $EN_DIS **/ UINT8 GppLock; -/** Offset 0x01C6 - Serial IRQ +/** Offset 0x01BC - Serial IRQ Enable/Disable Serial IRQ. 0:Disable, 1:Enable(Default). $EN_DIS **/ UINT8 SirqEnable; -/** Offset 0x01C7 - Serial IRQ Mode +/** Offset 0x01BD - Serial IRQ Mode Serial IRQ Mode Selection. 0:Quiet mode(Default), 1:Continuous mode. $EN_DIS **/ UINT8 SirqMode; -/** Offset 0x01C8 - Start Frame Pulse Width +/** Offset 0x01BE - Start Frame Pulse Width Start Frame Pulse Width Value. 0:ScSfpw4Clk(Default), 1: ScSfpw6Clk, 2:ScSfpw8Clk. 0:ScSfpw4Clk, 1:ScSfpw6Clk, 2:ScSfpw8Clk **/ UINT8 StartFramePulse; -/** Offset 0x01C9 - Enable SMBus +/** Offset 0x01BF - Enable SMBus Enable/disable SMBus controller. 0:Disable, 1:Enable(Default). $EN_DIS **/ UINT8 SmbusEnable; -/** Offset 0x01CA - SMBus ARP Support +/** Offset 0x01C0 - SMBus ARP Support Enable/disable SMBus ARP Support. 0:Disable, 1:Enable(Default). $EN_DIS **/ UINT8 ArpEnable; -/** Offset 0x01CB +/** Offset 0x01C1 **/ - UINT16 UnusedUpdSpace3; + UINT8 UnusedUpdSpace4; -/** Offset 0x01CD - SMBus Table Elements +/** Offset 0x01C2 - SMBus Table Elements The number of elements in the Reserved SMBus Address Table. 0x0080(Default). **/ UINT16 NumRsvdSmbusAddresses; -/** Offset 0x01CF - Reserved SMBus Address Table +/** Offset 0x01C4 - Reserved SMBus Address Table Array of addresses reserved for non-ARP-capable SMBus devices. 0x00(Default). **/ UINT8 RsvdSmbusAddressTable[128]; -/** Offset 0x024F - XHCI Disable Compliance Mode +/** Offset 0x0244 - XHCI Disable Compliance Mode Options to disable XHCI Link Compliance Mode. Default is FALSE to not disable Compliance Mode. Set TRUE to disable Compliance Mode. 0:FALSE(Default), 1:True. $EN_DIS **/ UINT8 DisableComplianceMode; -/** Offset 0x0250 - USB Per-Port Control +/** Offset 0x0245 - USB Per-Port Control Control each of the USB ports enable/disable. 0:Disable(Default), 1:Enable. $EN_DIS **/ UINT8 UsbPerPortCtl; -/** Offset 0x0251 - xHCI Mode +/** Offset 0x0246 - xHCI Mode Mode of operation of xHCI controller. 0:Disable, 1:Enable, 2:Auto(Default) 0:Disable, 1:Enable, 2:Auto **/ UINT8 Usb30Mode; -/** Offset 0x0252 - Enable USB2 ports +/** Offset 0x0247 +**/ + UINT8 UnusedUpdSpace5[1]; + +/** Offset 0x0248 - Enable USB2 ports Enable/disable per USB2 ports. One byte for each port, byte0 for port0, byte1 for port1, and so on. 0x01(Default). **/ UINT8 PortUsb20Enable[8]; -/** Offset 0x025A - USB20 Over Current Pin +/** Offset 0x0250 - USB20 Over Current Pin Over Current Pin number of USB 2.0 Port. 0x00(Default). **/ UINT8 PortUs20bOverCurrentPin[8]; -/** Offset 0x0262 - Enable USB3 ports - Enable/disable per USB3 ports. One byte for each port, byte0 for port0, byte1 for - port1, and so on. 0x01(Default). -**/ - UINT8 PortUsb30Enable[6]; - -/** Offset 0x0268 - USB20 Over Current Pin - Over Current Pin number of USB 3.0 Port. 0x01(Default). -**/ - UINT8 PortUs30bOverCurrentPin[6]; - -/** Offset 0x026E - XDCI Support +/** Offset 0x0258 - XDCI Support Enable/Disable XDCI. 0:Disable, 1:PCI_Mode(Default), 2:ACPI_mode. 0:Disable, 1:PCI_Mode, 2:ACPI_mode **/ UINT8 UsbOtg; -/** Offset 0x026F - Enable XHCI HSIC Support +/** Offset 0x0259 - Enable XHCI HSIC Support Enable/Disable USB HSIC1. 0:Disable(Default), 1:Enable. $EN_DIS **/ UINT8 HsicSupportEnable; -/** Offset 0x0270 - Enable XHCI SSIC Support +/** Offset 0x025A - Enable USB3 ports + Enable/disable per USB3 ports. One byte for each port, byte0 for port0, byte1 for + port1, and so on. 0x01(Default). +**/ + UINT8 PortUsb30Enable[6]; + +/** Offset 0x0260 - USB20 Over Current Pin + Over Current Pin number of USB 3.0 Port. 0x01(Default). +**/ + UINT8 PortUs30bOverCurrentPin[6]; + +/** Offset 0x0266 - Enable XHCI SSIC Support Enable/disable XHCI SSIC ports. One byte for each port, byte0 for port0, byte1 for port1. 0x00(Default). **/ UINT8 SsicPortEnable[2]; -/** Offset 0x0272 - SSIC Dlane PowerGating +/** Offset 0x0268 - SSIC Dlane PowerGating Enable/Disable SSIC Data lane Power Gating. 0:Disable, 1:Enable(Default). $EN_DIS **/ UINT16 DlanePwrGating; -/** Offset 0x0274 - VT-d +/** Offset 0x026A - VT-d Enable/Disable VT-d. 0:Disable(Default), 1:Enable. $EN_DIS **/ UINT8 VtdEnable; -/** Offset 0x0275 - HDAudio Delay Timer - The delay timer after Azalia reset. 0x012C(Default). -**/ - UINT16 ResetWaitTimer; - -/** Offset 0x0277 - SMI Lock bit +/** Offset 0x026B - SMI Lock bit Enable/Disable SMI_LOCK bit to prevent writes to the Global SMI Enable bit. 0:Disable, 1:Enable(Default). $EN_DIS **/ UINT8 LockDownGlobalSmi; -/** Offset 0x0278 - RTC Lock Bits +/** Offset 0x026C - HDAudio Delay Timer + The delay timer after Azalia reset. 0x012C(Default). +**/ + UINT16 ResetWaitTimer; + +/** Offset 0x026E - RTC Lock Bits Enable/Disable RTC Lock Bits. 0:Disable, 1:Enable(Default). $EN_DIS **/ UINT8 RtcLock; -/** Offset 0x0279 - XHCI SSIC RATE - Set XHCI SSIC1 Rate to A Series or B Series. 1:A Series(Default), 2:B Series. -**/ - UINT8 SsicRate[2]; - -/** Offset 0x027B - SATA Test Mode Selection +/** Offset 0x026F - SATA Test Mode Selection Enable/Disable SATA Test Mode. 0:Disable(Default), 1:Enable. $EN_DIS **/ UINT8 SataTestMode; -/** Offset 0x027C - SMBus Dynamic Power Gating +/** Offset 0x0270 - XHCI SSIC RATE + Set XHCI SSIC1 Rate to A Series or B Series. 1:A Series(Default), 2:B Series. +**/ + UINT8 SsicRate[2]; + +/** Offset 0x0272 - SMBus Dynamic Power Gating Enable/Disable SMBus dynamic power gating. 0:Disable(Default), 1:Enable. $EN_DIS **/ UINT16 DynamicPowerGating; -/** Offset 0x027E - Max Snoop Latency +/** Offset 0x0274 - Max Snoop Latency Latency Tolerance Reporting Max Snoop Latency. 0x0000(Default). **/ UINT16 PcieRpLtrMaxSnoopLatency[6]; -/** Offset 0x028A - Snoop Latency Override +/** Offset 0x0280 - Snoop Latency Override Snoop Latency Override for PCH PCIE. \n Disabled:Disable override.\n Manual:Manually enter override values.\n @@ -1290,23 +1298,40 @@ typedef struct { **/ UINT8 PcieRpSnoopLatencyOverrideMode[6]; -/** Offset 0x0290 - Snoop Latency Value +/** Offset 0x0286 +**/ + UINT8 UnusedUpdSpace6[2]; + +/** Offset 0x0288 - Snoop Latency Value LTR Snoop Latency value of PCH PCIE. 0:Minimum, 0x03FF:Maximum, 0x003C(Default). **/ UINT16 PcieRpSnoopLatencyOverrideValue[6]; -/** Offset 0x029C - Snoop Latency Multiplier +/** Offset 0x0294 - Snoop Latency Multiplier LTR Snoop Latency Multiplier of PCH PCIE. 0:1ns, 1:32ns, 2:1024ns(Default), 3:32768ns, 4:1048576ns, 5:33554432ns. **/ UINT8 PcieRpSnoopLatencyOverrideMultiplier[6]; -/** Offset 0x02A2 - Max Non-Snoop Latency +/** Offset 0x029A - Skip Multi-Processor Initialization + When this is skipped, boot loader must initialize processors before SilicionInit + API. 0: Initialize(Default), 1: Skip + $EN_DIS +**/ + UINT8 SkipMpInit; + +/** Offset 0x029B - DCI Auto Detect + Enable/disable DCI AUTO mode. Enabled(Default). + $EN_DIS +**/ + UINT8 DciAutoDetect; + +/** Offset 0x029C - Max Non-Snoop Latency Latency Tolerance Reporting, Max Non-Snoop Latency. 0x0000(Default). **/ UINT16 PcieRpLtrMaxNonSnoopLatency[6]; -/** Offset 0x02AE - Non Snoop Latency Override +/** Offset 0x02A8 - Non Snoop Latency Override Non Snoop Latency Override for PCH PCIE. \n Disabled:Disable override.\n Manual:Manually enter override values.\n @@ -1314,193 +1339,189 @@ typedef struct { **/ UINT8 PcieRpNonSnoopLatencyOverrideMode[6]; -/** Offset 0x02B4 - Non Snoop Latency Value - LTR Non Snoop Latency value of PCH PCIE. 0:Minimum, 0x03FF:Maximum, 0x003C(Default). -**/ - UINT16 PcieRpNonSnoopLatencyOverrideValue[6]; - -/** Offset 0x02C0 - Non Snoop Latency Multiplier - LTR Non Snoop Latency Multiplier of PCH PCIE. 0:1ns, 1:32ns, 2:1024ns(Default), - 3:32768ns, 4:1048576ns, 5:33554432ns. -**/ - UINT8 PcieRpNonSnoopLatencyOverrideMultiplier[6]; - -/** Offset 0x02C6 - PCIE Root Port Slot Power Limit Scale - Specifies scale used for slot power limit value. 0x00(Default). -**/ - UINT8 PcieRpSlotPowerLimitScale[6]; - -/** Offset 0x02CC - PCIE Root Port Slot Power Limit Value - Specifies upper limit on power supplie by slot. 0x00(Default). -**/ - UINT8 PcieRpSlotPowerLimitValue[6]; - -/** Offset 0x02D2 - Skip Multi-Processor Initialization - When this is skipped, boot loader must initialize processors before SilicionInit - API. 0: Initialize(Default), 1: Skip - $EN_DIS -**/ - UINT8 SkipMpInit; - -/** Offset 0x02D3 - DCI Auto Detect - Enable/disable DCI AUTO mode. Enabled(Default). - $EN_DIS -**/ - UINT8 DciAutoDetect; - -/** Offset 0x02D4 - Halt and Lock TCO Timer +/** Offset 0x02AE - Halt and Lock TCO Timer Halt and Lock the TCO Timer (Watchdog). 0:No, 1:Yes (default) **/ UINT8 TcoTimerHaltLock; -/** Offset 0x02D5 - Power Button Override Period +/** Offset 0x02AF - Power Button Override Period specifies how long will PMC wait before initiating a global reset. 000b-4s(default), 001b-6s, 010b-8s, 011b-10s, 100b-12s, 101b-14s.) 0x0:4s, 0x1:6s, 0x2:8s, 0x3:10s, 0x4:12s, 0x5:14s **/ UINT8 PwrBtnOverridePeriod; -/** Offset 0x02D6 - Power Button Native Mode Disable +/** Offset 0x02B0 - Non Snoop Latency Value + LTR Non Snoop Latency value of PCH PCIE. 0:Minimum, 0x03FF:Maximum, 0x003C(Default). +**/ + UINT16 PcieRpNonSnoopLatencyOverrideValue[6]; + +/** Offset 0x02BC - Non Snoop Latency Multiplier + LTR Non Snoop Latency Multiplier of PCH PCIE. 0:1ns, 1:32ns, 2:1024ns(Default), + 3:32768ns, 4:1048576ns, 5:33554432ns. +**/ + UINT8 PcieRpNonSnoopLatencyOverrideMultiplier[6]; + +/** Offset 0x02C2 - PCIE Root Port Slot Power Limit Scale + Specifies scale used for slot power limit value. 0x00(Default). +**/ + UINT8 PcieRpSlotPowerLimitScale[6]; + +/** Offset 0x02C8 - PCIE Root Port Slot Power Limit Value + Specifies upper limit on power supplie by slot. 0x00(Default). +**/ + UINT8 PcieRpSlotPowerLimitValue[6]; + +/** Offset 0x02CE - Power Button Native Mode Disable Disable power button native mode, when 1, this will result in the PMC logic constantly seeing the power button as de-asserted. 0 (default)) $EN_DIS **/ UINT8 DisableNativePowerButton; -/** Offset 0x02D7 - Power Button Debounce Mode +/** Offset 0x02CF - Power Button Debounce Mode Enable interrupt when PWRBTN# is asserted. 0:Disabled, 1:Enabled(default) $EN_DIS **/ UINT8 PowerButterDebounceMode; -/** Offset 0x02D8 - SDIO_TX_CMD_DLL_CNTL +/** Offset 0x02D0 - SDIO_TX_CMD_DLL_CNTL SDIO_TX_CMD_DLL_CNTL. 0x505(Default). **/ UINT32 SdioTxCmdCntl; -/** Offset 0x02DC - SDIO_TX_DATA_DLL_CNTL1 +/** Offset 0x02D4 - SDIO_TX_DATA_DLL_CNTL1 SDIO_TX_DATA_DLL_CNTL1. 0xE(Default). **/ UINT32 SdioTxDataCntl1; -/** Offset 0x02E0 - SDIO_TX_DATA_DLL_CNTL2 +/** Offset 0x02D8 - SDIO_TX_DATA_DLL_CNTL2 SDIO_TX_DATA_DLL_CNTL2. 0x22272828(Default). **/ UINT32 SdioTxDataCntl2; -/** Offset 0x02E4 - SDIO_RX_CMD_DATA_DLL_CNTL1 +/** Offset 0x02DC - SDIO_RX_CMD_DATA_DLL_CNTL1 SDIO_RX_CMD_DATA_DLL_CNTL1. 0x16161616(Default). **/ UINT32 SdioRxCmdDataCntl1; -/** Offset 0x02E8 - SDIO_RX_CMD_DATA_DLL_CNTL2 +/** Offset 0x02E0 - SDIO_RX_CMD_DATA_DLL_CNTL2 SDIO_RX_CMD_DATA_DLL_CNTL2. 0x10000(Default). **/ UINT32 SdioRxCmdDataCntl2; -/** Offset 0x02EC - SDCARD_TX_CMD_DLL_CNTL +/** Offset 0x02E4 - SDCARD_TX_CMD_DLL_CNTL SDCARD_TX_CMD_DLL_CNTL. 0x505(Default). **/ UINT32 SdcardTxCmdCntl; -/** Offset 0x02F0 - SDCARD_TX_DATA_DLL_CNTL1 +/** Offset 0x02E8 - SDCARD_TX_DATA_DLL_CNTL1 SDCARD_TX_DATA_DLL_CNTL1. 0xA13(Default). **/ UINT32 SdcardTxDataCntl1; -/** Offset 0x02F4 - SDCARD_TX_DATA_DLL_CNTL2 +/** Offset 0x02EC - SDCARD_TX_DATA_DLL_CNTL2 SDCARD_TX_DATA_DLL_CNTL2. 0x24242828(Default). **/ UINT32 SdcardTxDataCntl2; -/** Offset 0x02F8 - SDCARD_RX_CMD_DATA_DLL_CNTL1 +/** Offset 0x02F0 - SDCARD_RX_CMD_DATA_DLL_CNTL1 SDCARD_RX_CMD_DATA_DLL_CNTL1. 0x73A3637(Default). **/ UINT32 SdcardRxCmdDataCntl1; -/** Offset 0x02FC - SDCARD_RX_STROBE_DLL_CNTL +/** Offset 0x02F4 - SDCARD_RX_STROBE_DLL_CNTL SDCARD_RX_STROBE_DLL_CNTL. 0x0(Default). **/ UINT32 SdcardRxStrobeCntl; -/** Offset 0x0300 - SDCARD_RX_CMD_DATA_DLL_CNTL2 +/** Offset 0x02F8 - SDCARD_RX_CMD_DATA_DLL_CNTL2 SDCARD_RX_CMD_DATA_DLL_CNTL2. 0x10000(Default). **/ UINT32 SdcardRxCmdDataCntl2; -/** Offset 0x0304 - EMMC_TX_CMD_DLL_CNTL +/** Offset 0x02FC - EMMC_TX_CMD_DLL_CNTL EMMC_TX_CMD_DLL_CNTL. 0x505(Default). **/ UINT32 EmmcTxCmdCntl; -/** Offset 0x0308 - EMMC_TX_DATA_DLL_CNTL1 +/** Offset 0x0300 - EMMC_TX_DATA_DLL_CNTL1 EMMC_TX_DATA_DLL_CNTL1. 0xC11(Default). **/ UINT32 EmmcTxDataCntl1; -/** Offset 0x030C - EMMC_TX_DATA_DLL_CNTL2 +/** Offset 0x0304 - EMMC_TX_DATA_DLL_CNTL2 EMMC_TX_DATA_DLL_CNTL2. 0x1C2A2927(Default). **/ UINT32 EmmcTxDataCntl2; -/** Offset 0x0310 - EMMC_RX_CMD_DATA_DLL_CNTL1 +/** Offset 0x0308 - EMMC_RX_CMD_DATA_DLL_CNTL1 EMMC_RX_CMD_DATA_DLL_CNTL1. 0x000D162F(Default). **/ UINT32 EmmcRxCmdDataCntl1; -/** Offset 0x0314 - EMMC_RX_STROBE_DLL_CNTL +/** Offset 0x030C - EMMC_RX_STROBE_DLL_CNTL EMMC_RX_STROBE_DLL_CNTL. 0x0a0a(Default). **/ UINT32 EmmcRxStrobeCntl; -/** Offset 0x0318 - EMMC_RX_CMD_DATA_DLL_CNTL2 +/** Offset 0x0310 - EMMC_RX_CMD_DATA_DLL_CNTL2 EMMC_RX_CMD_DATA_DLL_CNTL2. 0x1003b(Default). **/ UINT32 EmmcRxCmdDataCntl2; -/** Offset 0x031C - EMMC_MASTER_DLL_CNTL +/** Offset 0x0314 - EMMC_MASTER_DLL_CNTL EMMC_MASTER_DLL_CNTL. 0x001(Default). **/ UINT32 EmmcMasterSwCntl; -/** Offset 0x0320 - PCIe Selectable De-emphasis +/** Offset 0x0318 - PCIe Selectable De-emphasis When the Link is operating at 5.0 GT/s speed, this bit selects the level of de-emphasis for an Upstream component. 1b:-3.5 dB 0b:-6 dB. 0:Disable, 1:Enable(Default). **/ UINT8 PcieRpSelectableDeemphasis[6]; -/** Offset 0x0326 -**/ - UINT8 UnusedUpdSpace4; - -/** Offset 0x0327 - Monitor Mwait Enable +/** Offset 0x031E - Monitor Mwait Enable Enable/Disable Monitor Mwait. For Windows* OS, this should be Enabled. For Linux based OS, this should be Disabled. 0:Disable, 1:Enable(Default). $EN_DIS **/ UINT8 MonitorMwaitEnable; -/** Offset 0x0328 - IRQ Interrupt Polarity Control - Set IRQ Interrupt Polarity Control to ITSS.IPC[0]~IPC[3]. 0:Active High, 1:Active Low -**/ - UINT32 IPC[4]; - -/** Offset 0x0338 - Disable ModPHY dynamic power gate - Disable ModPHY dynamic power gate for the specific SATA port. -**/ - UINT8 SataPortsDisableDynamicPg[2]; - -/** Offset 0x033A - Universal Audio Architecture compliance for DSP enabled system +/** Offset 0x031F - Universal Audio Architecture compliance for DSP enabled system 0: Not-UAA Compliant (Intel SST driver supported only), 1: UAA Compliant (HDA Inbox driver or SST driver supported). $EN_DIS **/ UINT8 HdAudioDspUaaCompliance; -/** Offset 0x033B +/** Offset 0x0320 - IRQ Interrupt Polarity Control + Set IRQ Interrupt Polarity Control to ITSS.IPC[0]~IPC[3]. 0:Active High, 1:Active Low **/ - UINT8 ReservedFspsUpd[5]; + UINT32 IPC[4]; + +/** Offset 0x0330 - Disable ModPHY dynamic power gate + Disable ModPHY dynamic power gate for the specific SATA port. +**/ + UINT8 SataPortsDisableDynamicPg[2]; + +/** Offset 0x0332 - Init CPU during S3 resume + 0: Do not initialize CPU during S3 resume. 1: Initialize CPU during S3 resume. + $EN_DIS +**/ + UINT8 InitS3Cpu; + +/** Offset 0x0333 - Skip P-unit Initialization + When this is skipped, boot loader must initialize P-unit before SilicionInit API. + 0: Initialize(Default), 1: Skip + $EN_DIS +**/ + UINT8 SkipPunitInit; + +/** Offset 0x0334 +**/ + UINT8 ReservedFspsUpd[12]; } FSP_S_CONFIG; /** Fsp S Test Configuration @@ -1550,10 +1571,14 @@ typedef struct { FSP_S_RESTRICTED_CONFIG FspsRestrictedConfig; /** Offset 0x0360 +**/ + UINT8 UnusedUpdSpace7[14]; + +/** Offset 0x036E **/ UINT16 UpdTerminator; } FSPS_UPD; -#pragma pack(pop) +#pragma pack() #endif