diff --git a/src/mainboard/amd/inagua/OemCustomize.c b/src/mainboard/amd/inagua/OemCustomize.c index c05480f164..d1f715c38d 100644 --- a/src/mainboard/amd/inagua/OemCustomize.c +++ b/src/mainboard/amd/inagua/OemCustomize.c @@ -18,6 +18,7 @@ #include #include #include +#include #define FILECODE PROC_RECOVERY_MEM_NB_ON_MRNON_FILECODE @@ -128,6 +129,23 @@ static AGESA_STATUS OemInitEarly(AMD_EARLY_PARAMS * InitEarly) return AGESA_SUCCESS; } +/*---------------------------------------------------------------------------------------- + * CUSTOMER OVERIDES MEMORY TABLE + *---------------------------------------------------------------------------------------- + */ + +/* + * Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA + * (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable + * is populated, AGESA will base its settings on the data from the table. Otherwise, it will + * use its default conservative settings. + */ +CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = { + NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 2), + NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 1), + PSO_END +}; + const struct OEM_HOOK OemCustomize = { .InitEarly = OemInitEarly, }; diff --git a/src/mainboard/amd/inagua/buildOpts.c b/src/mainboard/amd/inagua/buildOpts.c index 57590a2e75..b4651b6bb3 100644 --- a/src/mainboard/amd/inagua/buildOpts.c +++ b/src/mainboard/amd/inagua/buildOpts.c @@ -310,81 +310,3 @@ CONST AP_MTRR_SETTINGS ROMDATA OntarioApMtrrSettingsList[] = // Instantiate all solution relevant data. #include "PlatformInstall.h" -/*---------------------------------------------------------------------------------------- - * CUSTOMER OVERIDES MEMORY TABLE - *---------------------------------------------------------------------------------------- - */ - -/* - * Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA - * (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable - * is populated, AGESA will base its settings on the data from the table. Otherwise, it will - * use its default conservative settings. - */ -CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = { - // - // The following macros are supported (use comma to separate macros): - // - // MEMCLK_DIS_MAP(SocketID, ChannelID, MemClkDisBit0CSMap,..., MemClkDisBit7CSMap) - // The MemClk pins are identified based on BKDG definition of Fn2x88[MemClkDis] bitmap. - // AGESA will base on this value to disable unused MemClk to save power. - // Example: - // BKDG definition of Fn2x88[MemClkDis] bitmap for AM3 package is like below: - // Bit AM3/S1g3 pin name - // 0 M[B,A]_CLK_H/L[0] - // 1 M[B,A]_CLK_H/L[1] - // 2 M[B,A]_CLK_H/L[2] - // 3 M[B,A]_CLK_H/L[3] - // 4 M[B,A]_CLK_H/L[4] - // 5 M[B,A]_CLK_H/L[5] - // 6 M[B,A]_CLK_H/L[6] - // 7 M[B,A]_CLK_H/L[7] - // And platform has the following routing: - // CS0 M[B,A]_CLK_H/L[4] - // CS1 M[B,A]_CLK_H/L[2] - // CS2 M[B,A]_CLK_H/L[3] - // CS3 M[B,A]_CLK_H/L[5] - // Then platform can specify the following macro: - // MEMCLK_DIS_MAP(ANY_SOCKET, ANY_CHANNEL, 0x00, 0x00, 0x02, 0x04, 0x01, 0x08, 0x00, 0x00) - // - // CKE_TRI_MAP(SocketID, ChannelID, CKETriBit0CSMap, CKETriBit1CSMap) - // The CKE pins are identified based on BKDG definition of Fn2x9C_0C[CKETri] bitmap. - // AGESA will base on this value to tristate unused CKE to save power. - // - // ODT_TRI_MAP(SocketID, ChannelID, ODTTriBit0CSMap,..., ODTTriBit3CSMap) - // The ODT pins are identified based on BKDG definition of Fn2x9C_0C[ODTTri] bitmap. - // AGESA will base on this value to tristate unused ODT pins to save power. - // - // CS_TRI_MAP(SocketID, ChannelID, CSTriBit0CSMap,..., CSTriBit7CSMap) - // The Chip select pins are identified based on BKDG definition of Fn2x9C_0C[ChipSelTri] bitmap. - // AGESA will base on this value to tristate unused Chip select to save power. - // - // NUMBER_OF_DIMMS_SUPPORTED(SocketID, ChannelID, NumberOfDimmSlotsPerChannel) - // Specifies the number of DIMM slots per channel. - // - // NUMBER_OF_CHIP_SELECTS_SUPPORTED(SocketID, ChannelID, NumberOfChipSelectsPerChannel) - // Specifies the number of Chip selects per channel. - // - // NUMBER_OF_CHANNELS_SUPPORTED(SocketID, NumberOfChannelsPerSocket) - // Specifies the number of channels per socket. - // - // OVERRIDE_DDR_BUS_SPEED(SocketID, ChannelID, USER_MEMORY_TIMING_MODE, MEMORY_BUS_SPEED) - // Specifies DDR bus speed of channel ChannelID on socket SocketID. - // - // DRAM_TECHNOLOGY(SocketID, TECHNOLOGY_TYPE) - // Specifies the DRAM technology type of socket SocketID (DDR2, DDR3,...) - // - // WRITE_LEVELING_SEED(SocketID, ChannelID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, - // Byte6Seed, Byte7Seed, ByteEccSeed) - // Specifies the write leveling seed for a channel of a socket. - // - NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 2), - NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 1), - PSO_END -}; - -/* - * These tables are optional and may be used to adjust memory timing settings - */ -#include "mm.h" -#include "mn.h" diff --git a/src/mainboard/amd/olivehill/OemCustomize.c b/src/mainboard/amd/olivehill/OemCustomize.c index 0e307ee092..70c50352af 100644 --- a/src/mainboard/amd/olivehill/OemCustomize.c +++ b/src/mainboard/amd/olivehill/OemCustomize.c @@ -17,6 +17,7 @@ #include "amdlib.h" #include "Ids.h" #include "heapManager.h" +#include #include "Filecode.h" #include @@ -151,6 +152,36 @@ static AGESA_STATUS OemInitMid(AMD_MID_PARAMS * InitMid) return AGESA_SUCCESS; } +/*---------------------------------------------------------------------------------------- + * CUSTOMER OVERIDES MEMORY TABLE + *---------------------------------------------------------------------------------------- + */ + +/* + * Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA + * (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable + * is populated, AGESA will base its settings on the data from the table. Otherwise, it will + * use its default conservative settings. + */ +CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = { + #define SEED_A 0x12 + HW_RXEN_SEED( + ANY_SOCKET, CHANNEL_A, ALL_DIMMS, + SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, + SEED_A), + + NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 2), + NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 1), + MOTHER_BOARD_LAYERS (LAYERS_4), + + MEMCLK_DIS_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08, 0x00, 0x00, 0x00, 0x00), + CKE_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08), /* TODO: bit2map, bit3map */ + ODT_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08), + CS_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08, 0x00, 0x00, 0x00, 0x00), + + PSO_END +}; + const struct OEM_HOOK OemCustomize = { .InitEarly = OemInitEarly, .InitMid = OemInitMid, diff --git a/src/mainboard/amd/olivehill/buildOpts.c b/src/mainboard/amd/olivehill/buildOpts.c index 18e403f325..153d8562ca 100644 --- a/src/mainboard/amd/olivehill/buildOpts.c +++ b/src/mainboard/amd/olivehill/buildOpts.c @@ -355,98 +355,3 @@ GPIO_CONTROL olivehill_gpio[] = { #include "PlatformInstall.h" -/*---------------------------------------------------------------------------------------- - * CUSTOMER OVERIDES MEMORY TABLE - *---------------------------------------------------------------------------------------- - */ - -/* - * Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA - * (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable - * is populated, AGESA will base its settings on the data from the table. Otherwise, it will - * use its default conservative settings. - */ -CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = { - // - // The following macros are supported (use comma to separate macros): - // - // MEMCLK_DIS_MAP(SocketID, ChannelID, MemClkDisBit0CSMap,..., MemClkDisBit7CSMap) - // The MemClk pins are identified based on BKDG definition of Fn2x88[MemClkDis] bitmap. - // AGESA will base on this value to disable unused MemClk to save power. - // Example: - // BKDG definition of Fn2x88[MemClkDis] bitmap for AM3 package is like below: - // Bit AM3/S1g3 pin name - // 0 M[B,A]_CLK_H/L[0] - // 1 M[B,A]_CLK_H/L[1] - // 2 M[B,A]_CLK_H/L[2] - // 3 M[B,A]_CLK_H/L[3] - // 4 M[B,A]_CLK_H/L[4] - // 5 M[B,A]_CLK_H/L[5] - // 6 M[B,A]_CLK_H/L[6] - // 7 M[B,A]_CLK_H/L[7] - // And platform has the following routing: - // CS0 M[B,A]_CLK_H/L[4] - // CS1 M[B,A]_CLK_H/L[2] - // CS2 M[B,A]_CLK_H/L[3] - // CS3 M[B,A]_CLK_H/L[5] - // Then platform can specify the following macro: - // MEMCLK_DIS_MAP(ANY_SOCKET, ANY_CHANNEL, 0x00, 0x00, 0x02, 0x04, 0x01, 0x08, 0x00, 0x00) - // - // CKE_TRI_MAP(SocketID, ChannelID, CKETriBit0CSMap, CKETriBit1CSMap) - // The CKE pins are identified based on BKDG definition of Fn2x9C_0C[CKETri] bitmap. - // AGESA will base on this value to tristate unused CKE to save power. - // - // ODT_TRI_MAP(SocketID, ChannelID, ODTTriBit0CSMap,..., ODTTriBit3CSMap) - // The ODT pins are identified based on BKDG definition of Fn2x9C_0C[ODTTri] bitmap. - // AGESA will base on this value to tristate unused ODT pins to save power. - // - // CS_TRI_MAP(SocketID, ChannelID, CSTriBit0CSMap,..., CSTriBit7CSMap) - // The Chip select pins are identified based on BKDG definition of Fn2x9C_0C[ChipSelTri] bitmap. - // AGESA will base on this value to tristate unused Chip select to save power. - // - // NUMBER_OF_DIMMS_SUPPORTED(SocketID, ChannelID, NumberOfDimmSlotsPerChannel) - // Specifies the number of DIMM slots per channel. - // - // NUMBER_OF_CHIP_SELECTS_SUPPORTED(SocketID, ChannelID, NumberOfChipSelectsPerChannel) - // Specifies the number of Chip selects per channel. - // - // NUMBER_OF_CHANNELS_SUPPORTED(SocketID, NumberOfChannelsPerSocket) - // Specifies the number of channels per socket. - // - // OVERRIDE_DDR_BUS_SPEED(SocketID, ChannelID, USER_MEMORY_TIMING_MODE, MEMORY_BUS_SPEED) - // Specifies DDR bus speed of channel ChannelID on socket SocketID. - // - // DRAM_TECHNOLOGY(SocketID, TECHNOLOGY_TYPE) - // Specifies the DRAM technology type of socket SocketID (DDR2, DDR3,...) - // - // WRITE_LEVELING_SEED(SocketID, ChannelID, DimmID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, - // Byte6Seed, Byte7Seed, ByteEccSeed) - // Specifies the write leveling seed for a channel of a socket. - // - // HW_RXEN_SEED(SocketID, ChannelID, DimmID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, - // Byte6Seed, Byte7Seed, ByteEccSeed) - // Speicifes the HW RXEN training seed for a channel of a socket - // - #define SEED_A 0x12 - HW_RXEN_SEED( - ANY_SOCKET, CHANNEL_A, ALL_DIMMS, - SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, - SEED_A), - - NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 2), - NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 1), - MOTHER_BOARD_LAYERS (LAYERS_4), - - MEMCLK_DIS_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08, 0x00, 0x00, 0x00, 0x00), - CKE_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08), /* TODO: bit2map, bit3map */ - ODT_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08), - CS_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08, 0x00, 0x00, 0x00, 0x00), - - PSO_END -}; - -/* - * These tables are optional and may be used to adjust memory timing settings - */ -#include "mm.h" -#include "mn.h" diff --git a/src/mainboard/amd/parmer/OemCustomize.c b/src/mainboard/amd/parmer/OemCustomize.c index 36759791f8..fb6177a0f0 100644 --- a/src/mainboard/amd/parmer/OemCustomize.c +++ b/src/mainboard/amd/parmer/OemCustomize.c @@ -17,6 +17,7 @@ #include "amdlib.h" #include "Ids.h" #include "heapManager.h" +#include #include "Filecode.h" #include @@ -198,6 +199,28 @@ static AGESA_STATUS OemInitMid(AMD_MID_PARAMS * InitMid) return AGESA_SUCCESS; } +/*---------------------------------------------------------------------------------------- + * CUSTOMER OVERIDES MEMORY TABLE + *---------------------------------------------------------------------------------------- + */ + +/* + * Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA + * (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable + * is populated, AGESA will base its settings on the data from the table. Otherwise, it will + * use its default conservative settings. + */ +CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = { + NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 1), + NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 2), + MEMCLK_DIS_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00), + CKE_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x05, 0x0A), + ODT_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x00, 0x00), + CS_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00), + + PSO_END +}; + const struct OEM_HOOK OemCustomize = { .InitEarly = OemInitEarly, .InitMid = OemInitMid, diff --git a/src/mainboard/amd/parmer/buildOpts.c b/src/mainboard/amd/parmer/buildOpts.c index 41b3e398e9..e7ee47dedf 100644 --- a/src/mainboard/amd/parmer/buildOpts.c +++ b/src/mainboard/amd/parmer/buildOpts.c @@ -356,90 +356,3 @@ GPIO_CONTROL parmer_gpio[] = { #include "PlatformInstall.h" -/*---------------------------------------------------------------------------------------- - * CUSTOMER OVERIDES MEMORY TABLE - *---------------------------------------------------------------------------------------- - */ - -/* - * Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA - * (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable - * is populated, AGESA will base its settings on the data from the table. Otherwise, it will - * use its default conservative settings. - */ -CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = { - // - // The following macros are supported (use comma to separate macros): - // - // MEMCLK_DIS_MAP(SocketID, ChannelID, MemClkDisBit0CSMap,..., MemClkDisBit7CSMap) - // The MemClk pins are identified based on BKDG definition of Fn2x88[MemClkDis] bitmap. - // AGESA will base on this value to disable unused MemClk to save power. - // Example: - // BKDG definition of Fn2x88[MemClkDis] bitmap for AM3 package is like below: - // Bit AM3/S1g3 pin name - // 0 M[B,A]_CLK_H/L[0] - // 1 M[B,A]_CLK_H/L[1] - // 2 M[B,A]_CLK_H/L[2] - // 3 M[B,A]_CLK_H/L[3] - // 4 M[B,A]_CLK_H/L[4] - // 5 M[B,A]_CLK_H/L[5] - // 6 M[B,A]_CLK_H/L[6] - // 7 M[B,A]_CLK_H/L[7] - // And platform has the following routing: - // CS0 M[B,A]_CLK_H/L[4] - // CS1 M[B,A]_CLK_H/L[2] - // CS2 M[B,A]_CLK_H/L[3] - // CS3 M[B,A]_CLK_H/L[5] - // Then platform can specify the following macro: - // MEMCLK_DIS_MAP(ANY_SOCKET, ANY_CHANNEL, 0x00, 0x00, 0x02, 0x04, 0x01, 0x08, 0x00, 0x00) - // - // CKE_TRI_MAP(SocketID, ChannelID, CKETriBit0CSMap, CKETriBit1CSMap) - // The CKE pins are identified based on BKDG definition of Fn2x9C_0C[CKETri] bitmap. - // AGESA will base on this value to tristate unused CKE to save power. - // - // ODT_TRI_MAP(SocketID, ChannelID, ODTTriBit0CSMap,..., ODTTriBit3CSMap) - // The ODT pins are identified based on BKDG definition of Fn2x9C_0C[ODTTri] bitmap. - // AGESA will base on this value to tristate unused ODT pins to save power. - // - // CS_TRI_MAP(SocketID, ChannelID, CSTriBit0CSMap,..., CSTriBit7CSMap) - // The Chip select pins are identified based on BKDG definition of Fn2x9C_0C[ChipSelTri] bitmap. - // AGESA will base on this value to tristate unused Chip select to save power. - // - // NUMBER_OF_DIMMS_SUPPORTED(SocketID, ChannelID, NumberOfDimmSlotsPerChannel) - // Specifies the number of DIMM slots per channel. - // - // NUMBER_OF_CHIP_SELECTS_SUPPORTED(SocketID, ChannelID, NumberOfChipSelectsPerChannel) - // Specifies the number of Chip selects per channel. - // - // NUMBER_OF_CHANNELS_SUPPORTED(SocketID, NumberOfChannelsPerSocket) - // Specifies the number of channels per socket. - // - // OVERRIDE_DDR_BUS_SPEED(SocketID, ChannelID, USER_MEMORY_TIMING_MODE, MEMORY_BUS_SPEED) - // Specifies DDR bus speed of channel ChannelID on socket SocketID. - // - // DRAM_TECHNOLOGY(SocketID, TECHNOLOGY_TYPE) - // Specifies the DRAM technology type of socket SocketID (DDR2, DDR3,...) - // - // WRITE_LEVELING_SEED(SocketID, ChannelID, DimmID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, - // Byte6Seed, Byte7Seed, ByteEccSeed) - // Specifies the write leveling seed for a channel of a socket. - // - // HW_RXEN_SEED(SocketID, ChannelID, DimmID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, - // Byte6Seed, Byte7Seed, ByteEccSeed) - // Speicifes the HW RXEN training seed for a channel of a socket - // - NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 1), - NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 2), - MEMCLK_DIS_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00), - CKE_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x05, 0x0A), - ODT_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x00, 0x00), - CS_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00), - - PSO_END -}; - -/* - * These tables are optional and may be used to adjust memory timing settings - */ -#include "mm.h" -#include "mn.h" diff --git a/src/mainboard/amd/persimmon/OemCustomize.c b/src/mainboard/amd/persimmon/OemCustomize.c index c8a344794c..825364ecbc 100644 --- a/src/mainboard/amd/persimmon/OemCustomize.c +++ b/src/mainboard/amd/persimmon/OemCustomize.c @@ -18,6 +18,7 @@ #include #include #include +#include #define FILECODE PROC_RECOVERY_MEM_NB_ON_MRNON_FILECODE @@ -134,6 +135,23 @@ PCIe_COMPLEX_DESCRIPTOR Brazos = { return AGESA_SUCCESS; } +/*---------------------------------------------------------------------------------------- + * CUSTOMER OVERIDES MEMORY TABLE + *---------------------------------------------------------------------------------------- + */ + +/* + * Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA + * (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable + * is populated, AGESA will base its settings on the data from the table. Otherwise, it will + * use its default conservative settings. + */ +CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = { + NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 2), + NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 1), + PSO_END +}; + const struct OEM_HOOK OemCustomize = { .InitEarly = OemInitEarly, }; diff --git a/src/mainboard/amd/persimmon/buildOpts.c b/src/mainboard/amd/persimmon/buildOpts.c index 23e2706a3f..1ded047f68 100644 --- a/src/mainboard/amd/persimmon/buildOpts.c +++ b/src/mainboard/amd/persimmon/buildOpts.c @@ -310,81 +310,3 @@ CONST AP_MTRR_SETTINGS ROMDATA OntarioApMtrrSettingsList[] = // Instantiate all solution relevant data. #include "PlatformInstall.h" -/*---------------------------------------------------------------------------------------- - * CUSTOMER OVERIDES MEMORY TABLE - *---------------------------------------------------------------------------------------- - */ - -/* - * Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA - * (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable - * is populated, AGESA will base its settings on the data from the table. Otherwise, it will - * use its default conservative settings. - */ -CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = { - // - // The following macros are supported (use comma to separate macros): - // - // MEMCLK_DIS_MAP(SocketID, ChannelID, MemClkDisBit0CSMap,..., MemClkDisBit7CSMap) - // The MemClk pins are identified based on BKDG definition of Fn2x88[MemClkDis] bitmap. - // AGESA will base on this value to disable unused MemClk to save power. - // Example: - // BKDG definition of Fn2x88[MemClkDis] bitmap for AM3 package is like below: - // Bit AM3/S1g3 pin name - // 0 M[B,A]_CLK_H/L[0] - // 1 M[B,A]_CLK_H/L[1] - // 2 M[B,A]_CLK_H/L[2] - // 3 M[B,A]_CLK_H/L[3] - // 4 M[B,A]_CLK_H/L[4] - // 5 M[B,A]_CLK_H/L[5] - // 6 M[B,A]_CLK_H/L[6] - // 7 M[B,A]_CLK_H/L[7] - // And platform has the following routing: - // CS0 M[B,A]_CLK_H/L[4] - // CS1 M[B,A]_CLK_H/L[2] - // CS2 M[B,A]_CLK_H/L[3] - // CS3 M[B,A]_CLK_H/L[5] - // Then platform can specify the following macro: - // MEMCLK_DIS_MAP(ANY_SOCKET, ANY_CHANNEL, 0x00, 0x00, 0x02, 0x04, 0x01, 0x08, 0x00, 0x00) - // - // CKE_TRI_MAP(SocketID, ChannelID, CKETriBit0CSMap, CKETriBit1CSMap) - // The CKE pins are identified based on BKDG definition of Fn2x9C_0C[CKETri] bitmap. - // AGESA will base on this value to tristate unused CKE to save power. - // - // ODT_TRI_MAP(SocketID, ChannelID, ODTTriBit0CSMap,..., ODTTriBit3CSMap) - // The ODT pins are identified based on BKDG definition of Fn2x9C_0C[ODTTri] bitmap. - // AGESA will base on this value to tristate unused ODT pins to save power. - // - // CS_TRI_MAP(SocketID, ChannelID, CSTriBit0CSMap,..., CSTriBit7CSMap) - // The Chip select pins are identified based on BKDG definition of Fn2x9C_0C[ChipSelTri] bitmap. - // AGESA will base on this value to tristate unused Chip select to save power. - // - // NUMBER_OF_DIMMS_SUPPORTED(SocketID, ChannelID, NumberOfDimmSlotsPerChannel) - // Specifies the number of DIMM slots per channel. - // - // NUMBER_OF_CHIP_SELECTS_SUPPORTED(SocketID, ChannelID, NumberOfChipSelectsPerChannel) - // Specifies the number of Chip selects per channel. - // - // NUMBER_OF_CHANNELS_SUPPORTED(SocketID, NumberOfChannelsPerSocket) - // Specifies the number of channels per socket. - // - // OVERRIDE_DDR_BUS_SPEED(SocketID, ChannelID, USER_MEMORY_TIMING_MODE, MEMORY_BUS_SPEED) - // Specifies DDR bus speed of channel ChannelID on socket SocketID. - // - // DRAM_TECHNOLOGY(SocketID, TECHNOLOGY_TYPE) - // Specifies the DRAM technology type of socket SocketID (DDR2, DDR3,...) - // - // WRITE_LEVELING_SEED(SocketID, ChannelID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, - // Byte6Seed, Byte7Seed, ByteEccSeed) - // Specifies the write leveling seed for a channel of a socket. - // - NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 2), - NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 1), - PSO_END -}; - -/* - * These tables are optional and may be used to adjust memory timing settings - */ -#include "mm.h" -#include "mn.h" diff --git a/src/mainboard/amd/south_station/OemCustomize.c b/src/mainboard/amd/south_station/OemCustomize.c index c88d6aed29..74b0aa8e17 100644 --- a/src/mainboard/amd/south_station/OemCustomize.c +++ b/src/mainboard/amd/south_station/OemCustomize.c @@ -18,6 +18,7 @@ #include #include #include +#include #define FILECODE PROC_RECOVERY_MEM_NB_ON_MRNON_FILECODE @@ -136,6 +137,23 @@ PCIe_COMPLEX_DESCRIPTOR Brazos = { return AGESA_SUCCESS; } +/*---------------------------------------------------------------------------------------- + * CUSTOMER OVERIDES MEMORY TABLE + *---------------------------------------------------------------------------------------- + */ + +/* + * Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA + * (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable + * is populated, AGESA will base its settings on the data from the table. Otherwise, it will + * use its default conservative settings. + */ +CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = { + NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 2), + NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 1), + PSO_END +}; + const struct OEM_HOOK OemCustomize = { .InitEarly = OemInitEarly, }; diff --git a/src/mainboard/amd/south_station/buildOpts.c b/src/mainboard/amd/south_station/buildOpts.c index ad4047a79e..7f07ea1210 100644 --- a/src/mainboard/amd/south_station/buildOpts.c +++ b/src/mainboard/amd/south_station/buildOpts.c @@ -310,81 +310,3 @@ CONST AP_MTRR_SETTINGS ROMDATA OntarioApMtrrSettingsList[] = // Instantiate all solution relevant data. #include "PlatformInstall.h" -/*---------------------------------------------------------------------------------------- - * CUSTOMER OVERIDES MEMORY TABLE - *---------------------------------------------------------------------------------------- - */ - -/* - * Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA - * (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable - * is populated, AGESA will base its settings on the data from the table. Otherwise, it will - * use its default conservative settings. - */ -CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = { - // - // The following macros are supported (use comma to separate macros): - // - // MEMCLK_DIS_MAP(SocketID, ChannelID, MemClkDisBit0CSMap,..., MemClkDisBit7CSMap) - // The MemClk pins are identified based on BKDG definition of Fn2x88[MemClkDis] bitmap. - // AGESA will base on this value to disable unused MemClk to save power. - // Example: - // BKDG definition of Fn2x88[MemClkDis] bitmap for AM3 package is like below: - // Bit AM3/S1g3 pin name - // 0 M[B,A]_CLK_H/L[0] - // 1 M[B,A]_CLK_H/L[1] - // 2 M[B,A]_CLK_H/L[2] - // 3 M[B,A]_CLK_H/L[3] - // 4 M[B,A]_CLK_H/L[4] - // 5 M[B,A]_CLK_H/L[5] - // 6 M[B,A]_CLK_H/L[6] - // 7 M[B,A]_CLK_H/L[7] - // And platform has the following routing: - // CS0 M[B,A]_CLK_H/L[4] - // CS1 M[B,A]_CLK_H/L[2] - // CS2 M[B,A]_CLK_H/L[3] - // CS3 M[B,A]_CLK_H/L[5] - // Then platform can specify the following macro: - // MEMCLK_DIS_MAP(ANY_SOCKET, ANY_CHANNEL, 0x00, 0x00, 0x02, 0x04, 0x01, 0x08, 0x00, 0x00) - // - // CKE_TRI_MAP(SocketID, ChannelID, CKETriBit0CSMap, CKETriBit1CSMap) - // The CKE pins are identified based on BKDG definition of Fn2x9C_0C[CKETri] bitmap. - // AGESA will base on this value to tristate unused CKE to save power. - // - // ODT_TRI_MAP(SocketID, ChannelID, ODTTriBit0CSMap,..., ODTTriBit3CSMap) - // The ODT pins are identified based on BKDG definition of Fn2x9C_0C[ODTTri] bitmap. - // AGESA will base on this value to tristate unused ODT pins to save power. - // - // CS_TRI_MAP(SocketID, ChannelID, CSTriBit0CSMap,..., CSTriBit7CSMap) - // The Chip select pins are identified based on BKDG definition of Fn2x9C_0C[ChipSelTri] bitmap. - // AGESA will base on this value to tristate unused Chip select to save power. - // - // NUMBER_OF_DIMMS_SUPPORTED(SocketID, ChannelID, NumberOfDimmSlotsPerChannel) - // Specifies the number of DIMM slots per channel. - // - // NUMBER_OF_CHIP_SELECTS_SUPPORTED(SocketID, ChannelID, NumberOfChipSelectsPerChannel) - // Specifies the number of Chip selects per channel. - // - // NUMBER_OF_CHANNELS_SUPPORTED(SocketID, NumberOfChannelsPerSocket) - // Specifies the number of channels per socket. - // - // OVERRIDE_DDR_BUS_SPEED(SocketID, ChannelID, USER_MEMORY_TIMING_MODE, MEMORY_BUS_SPEED) - // Specifies DDR bus speed of channel ChannelID on socket SocketID. - // - // DRAM_TECHNOLOGY(SocketID, TECHNOLOGY_TYPE) - // Specifies the DRAM technology type of socket SocketID (DDR2, DDR3,...) - // - // WRITE_LEVELING_SEED(SocketID, ChannelID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, - // Byte6Seed, Byte7Seed, ByteEccSeed) - // Specifies the write leveling seed for a channel of a socket. - // - NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 2), - NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 1), - PSO_END -}; - -/* - * These tables are optional and may be used to adjust memory timing settings - */ -#include "mm.h" -#include "mn.h" diff --git a/src/mainboard/amd/thatcher/OemCustomize.c b/src/mainboard/amd/thatcher/OemCustomize.c index 75694f1711..66058f2a4c 100644 --- a/src/mainboard/amd/thatcher/OemCustomize.c +++ b/src/mainboard/amd/thatcher/OemCustomize.c @@ -17,6 +17,7 @@ #include "amdlib.h" #include "Ids.h" #include "heapManager.h" +#include #include "Filecode.h" #include @@ -224,6 +225,28 @@ static AGESA_STATUS OemInitMid(AMD_MID_PARAMS * InitMid) return AGESA_SUCCESS; } +/*---------------------------------------------------------------------------------------- + * CUSTOMER OVERIDES MEMORY TABLE + *---------------------------------------------------------------------------------------- + */ + +/* + * Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA + * (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable + * is populated, AGESA will base its settings on the data from the table. Otherwise, it will + * use its default conservative settings. + */ +CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = { + NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 1), + NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 2), + MEMCLK_DIS_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00), + CKE_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x05, 0x0A), + ODT_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x00, 0x00), + CS_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00), + + PSO_END +}; + const struct OEM_HOOK OemCustomize = { .InitEarly = OemInitEarly, .InitMid = OemInitMid, diff --git a/src/mainboard/amd/thatcher/buildOpts.c b/src/mainboard/amd/thatcher/buildOpts.c index 94d842a836..a26f6971b3 100644 --- a/src/mainboard/amd/thatcher/buildOpts.c +++ b/src/mainboard/amd/thatcher/buildOpts.c @@ -356,90 +356,3 @@ GPIO_CONTROL thatcher_gpio[] = { #include "PlatformInstall.h" -/*---------------------------------------------------------------------------------------- - * CUSTOMER OVERIDES MEMORY TABLE - *---------------------------------------------------------------------------------------- - */ - -/* - * Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA - * (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable - * is populated, AGESA will base its settings on the data from the table. Otherwise, it will - * use its default conservative settings. - */ -CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = { - // - // The following macros are supported (use comma to separate macros): - // - // MEMCLK_DIS_MAP(SocketID, ChannelID, MemClkDisBit0CSMap,..., MemClkDisBit7CSMap) - // The MemClk pins are identified based on BKDG definition of Fn2x88[MemClkDis] bitmap. - // AGESA will base on this value to disable unused MemClk to save power. - // Example: - // BKDG definition of Fn2x88[MemClkDis] bitmap for AM3 package is like below: - // Bit AM3/S1g3 pin name - // 0 M[B,A]_CLK_H/L[0] - // 1 M[B,A]_CLK_H/L[1] - // 2 M[B,A]_CLK_H/L[2] - // 3 M[B,A]_CLK_H/L[3] - // 4 M[B,A]_CLK_H/L[4] - // 5 M[B,A]_CLK_H/L[5] - // 6 M[B,A]_CLK_H/L[6] - // 7 M[B,A]_CLK_H/L[7] - // And platform has the following routing: - // CS0 M[B,A]_CLK_H/L[4] - // CS1 M[B,A]_CLK_H/L[2] - // CS2 M[B,A]_CLK_H/L[3] - // CS3 M[B,A]_CLK_H/L[5] - // Then platform can specify the following macro: - // MEMCLK_DIS_MAP(ANY_SOCKET, ANY_CHANNEL, 0x00, 0x00, 0x02, 0x04, 0x01, 0x08, 0x00, 0x00) - // - // CKE_TRI_MAP(SocketID, ChannelID, CKETriBit0CSMap, CKETriBit1CSMap) - // The CKE pins are identified based on BKDG definition of Fn2x9C_0C[CKETri] bitmap. - // AGESA will base on this value to tristate unused CKE to save power. - // - // ODT_TRI_MAP(SocketID, ChannelID, ODTTriBit0CSMap,..., ODTTriBit3CSMap) - // The ODT pins are identified based on BKDG definition of Fn2x9C_0C[ODTTri] bitmap. - // AGESA will base on this value to tristate unused ODT pins to save power. - // - // CS_TRI_MAP(SocketID, ChannelID, CSTriBit0CSMap,..., CSTriBit7CSMap) - // The Chip select pins are identified based on BKDG definition of Fn2x9C_0C[ChipSelTri] bitmap. - // AGESA will base on this value to tristate unused Chip select to save power. - // - // NUMBER_OF_DIMMS_SUPPORTED(SocketID, ChannelID, NumberOfDimmSlotsPerChannel) - // Specifies the number of DIMM slots per channel. - // - // NUMBER_OF_CHIP_SELECTS_SUPPORTED(SocketID, ChannelID, NumberOfChipSelectsPerChannel) - // Specifies the number of Chip selects per channel. - // - // NUMBER_OF_CHANNELS_SUPPORTED(SocketID, NumberOfChannelsPerSocket) - // Specifies the number of channels per socket. - // - // OVERRIDE_DDR_BUS_SPEED(SocketID, ChannelID, USER_MEMORY_TIMING_MODE, MEMORY_BUS_SPEED) - // Specifies DDR bus speed of channel ChannelID on socket SocketID. - // - // DRAM_TECHNOLOGY(SocketID, TECHNOLOGY_TYPE) - // Specifies the DRAM technology type of socket SocketID (DDR2, DDR3,...) - // - // WRITE_LEVELING_SEED(SocketID, ChannelID, DimmID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, - // Byte6Seed, Byte7Seed, ByteEccSeed) - // Specifies the write leveling seed for a channel of a socket. - // - // HW_RXEN_SEED(SocketID, ChannelID, DimmID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, - // Byte6Seed, Byte7Seed, ByteEccSeed) - // Speicifes the HW RXEN training seed for a channel of a socket - // - NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 1), - NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 2), - MEMCLK_DIS_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00), - CKE_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x05, 0x0A), - ODT_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x00, 0x00), - CS_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00), - - PSO_END -}; - -/* - * These tables are optional and may be used to adjust memory timing settings - */ -#include "mm.h" -#include "mn.h" diff --git a/src/mainboard/amd/union_station/OemCustomize.c b/src/mainboard/amd/union_station/OemCustomize.c index 335ee93036..6f4dbfc368 100644 --- a/src/mainboard/amd/union_station/OemCustomize.c +++ b/src/mainboard/amd/union_station/OemCustomize.c @@ -17,6 +17,7 @@ #include "amdlib.h" #include "Ids.h" #include "heapManager.h" +#include #include "PlatformGnbPcieComplex.h" #include "Filecode.h" @@ -142,6 +143,23 @@ PCIe_COMPLEX_DESCRIPTOR Brazos = { return AGESA_SUCCESS; } +/*---------------------------------------------------------------------------------------- + * CUSTOMER OVERIDES MEMORY TABLE + *---------------------------------------------------------------------------------------- + */ + +/* + * Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA + * (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable + * is populated, AGESA will base its settings on the data from the table. Otherwise, it will + * use its default conservative settings. + */ +CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = { + NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 2), + NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 1), + PSO_END +}; + const struct OEM_HOOK OemCustomize = { .InitEarly = OemInitEarly, }; diff --git a/src/mainboard/amd/union_station/buildOpts.c b/src/mainboard/amd/union_station/buildOpts.c index ad4047a79e..7f07ea1210 100644 --- a/src/mainboard/amd/union_station/buildOpts.c +++ b/src/mainboard/amd/union_station/buildOpts.c @@ -310,81 +310,3 @@ CONST AP_MTRR_SETTINGS ROMDATA OntarioApMtrrSettingsList[] = // Instantiate all solution relevant data. #include "PlatformInstall.h" -/*---------------------------------------------------------------------------------------- - * CUSTOMER OVERIDES MEMORY TABLE - *---------------------------------------------------------------------------------------- - */ - -/* - * Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA - * (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable - * is populated, AGESA will base its settings on the data from the table. Otherwise, it will - * use its default conservative settings. - */ -CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = { - // - // The following macros are supported (use comma to separate macros): - // - // MEMCLK_DIS_MAP(SocketID, ChannelID, MemClkDisBit0CSMap,..., MemClkDisBit7CSMap) - // The MemClk pins are identified based on BKDG definition of Fn2x88[MemClkDis] bitmap. - // AGESA will base on this value to disable unused MemClk to save power. - // Example: - // BKDG definition of Fn2x88[MemClkDis] bitmap for AM3 package is like below: - // Bit AM3/S1g3 pin name - // 0 M[B,A]_CLK_H/L[0] - // 1 M[B,A]_CLK_H/L[1] - // 2 M[B,A]_CLK_H/L[2] - // 3 M[B,A]_CLK_H/L[3] - // 4 M[B,A]_CLK_H/L[4] - // 5 M[B,A]_CLK_H/L[5] - // 6 M[B,A]_CLK_H/L[6] - // 7 M[B,A]_CLK_H/L[7] - // And platform has the following routing: - // CS0 M[B,A]_CLK_H/L[4] - // CS1 M[B,A]_CLK_H/L[2] - // CS2 M[B,A]_CLK_H/L[3] - // CS3 M[B,A]_CLK_H/L[5] - // Then platform can specify the following macro: - // MEMCLK_DIS_MAP(ANY_SOCKET, ANY_CHANNEL, 0x00, 0x00, 0x02, 0x04, 0x01, 0x08, 0x00, 0x00) - // - // CKE_TRI_MAP(SocketID, ChannelID, CKETriBit0CSMap, CKETriBit1CSMap) - // The CKE pins are identified based on BKDG definition of Fn2x9C_0C[CKETri] bitmap. - // AGESA will base on this value to tristate unused CKE to save power. - // - // ODT_TRI_MAP(SocketID, ChannelID, ODTTriBit0CSMap,..., ODTTriBit3CSMap) - // The ODT pins are identified based on BKDG definition of Fn2x9C_0C[ODTTri] bitmap. - // AGESA will base on this value to tristate unused ODT pins to save power. - // - // CS_TRI_MAP(SocketID, ChannelID, CSTriBit0CSMap,..., CSTriBit7CSMap) - // The Chip select pins are identified based on BKDG definition of Fn2x9C_0C[ChipSelTri] bitmap. - // AGESA will base on this value to tristate unused Chip select to save power. - // - // NUMBER_OF_DIMMS_SUPPORTED(SocketID, ChannelID, NumberOfDimmSlotsPerChannel) - // Specifies the number of DIMM slots per channel. - // - // NUMBER_OF_CHIP_SELECTS_SUPPORTED(SocketID, ChannelID, NumberOfChipSelectsPerChannel) - // Specifies the number of Chip selects per channel. - // - // NUMBER_OF_CHANNELS_SUPPORTED(SocketID, NumberOfChannelsPerSocket) - // Specifies the number of channels per socket. - // - // OVERRIDE_DDR_BUS_SPEED(SocketID, ChannelID, USER_MEMORY_TIMING_MODE, MEMORY_BUS_SPEED) - // Specifies DDR bus speed of channel ChannelID on socket SocketID. - // - // DRAM_TECHNOLOGY(SocketID, TECHNOLOGY_TYPE) - // Specifies the DRAM technology type of socket SocketID (DDR2, DDR3,...) - // - // WRITE_LEVELING_SEED(SocketID, ChannelID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, - // Byte6Seed, Byte7Seed, ByteEccSeed) - // Specifies the write leveling seed for a channel of a socket. - // - NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 2), - NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 1), - PSO_END -}; - -/* - * These tables are optional and may be used to adjust memory timing settings - */ -#include "mm.h" -#include "mn.h" diff --git a/src/mainboard/asrock/e350m1/OemCustomize.c b/src/mainboard/asrock/e350m1/OemCustomize.c index 4085f3e589..ab563ae1b3 100644 --- a/src/mainboard/asrock/e350m1/OemCustomize.c +++ b/src/mainboard/asrock/e350m1/OemCustomize.c @@ -17,6 +17,7 @@ #include "amdlib.h" #include "Ids.h" #include "heapManager.h" +#include #include "PlatformGnbPcieComplex.h" #include "Filecode.h" @@ -122,6 +123,23 @@ PCIe_COMPLEX_DESCRIPTOR Brazos = { return AGESA_SUCCESS; } +/*---------------------------------------------------------------------------------------- + * CUSTOMER OVERIDES MEMORY TABLE + *---------------------------------------------------------------------------------------- + */ + +/* + * Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA + * (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable + * is populated, AGESA will base its settings on the data from the table. Otherwise, it will + * use its default conservative settings. + */ +CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = { + NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 2), + NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 1), + PSO_END +}; + const struct OEM_HOOK OemCustomize = { .InitEarly = OemInitEarly, }; diff --git a/src/mainboard/asrock/e350m1/buildOpts.c b/src/mainboard/asrock/e350m1/buildOpts.c index 140ece4338..2fba932d62 100644 --- a/src/mainboard/asrock/e350m1/buildOpts.c +++ b/src/mainboard/asrock/e350m1/buildOpts.c @@ -310,81 +310,3 @@ CONST AP_MTRR_SETTINGS ROMDATA OntarioApMtrrSettingsList[] = // Instantiate all solution relevant data. #include "PlatformInstall.h" -/*---------------------------------------------------------------------------------------- - * CUSTOMER OVERIDES MEMORY TABLE - *---------------------------------------------------------------------------------------- - */ - -/* - * Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA - * (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable - * is populated, AGESA will base its settings on the data from the table. Otherwise, it will - * use its default conservative settings. - */ -CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = { - // - // The following macros are supported (use comma to separate macros): - // - // MEMCLK_DIS_MAP(SocketID, ChannelID, MemClkDisBit0CSMap,..., MemClkDisBit7CSMap) - // The MemClk pins are identified based on BKDG definition of Fn2x88[MemClkDis] bitmap. - // AGESA will base on this value to disable unused MemClk to save power. - // Example: - // BKDG definition of Fn2x88[MemClkDis] bitmap for AM3 package is like below: - // Bit AM3/S1g3 pin name - // 0 M[B,A]_CLK_H/L[0] - // 1 M[B,A]_CLK_H/L[1] - // 2 M[B,A]_CLK_H/L[2] - // 3 M[B,A]_CLK_H/L[3] - // 4 M[B,A]_CLK_H/L[4] - // 5 M[B,A]_CLK_H/L[5] - // 6 M[B,A]_CLK_H/L[6] - // 7 M[B,A]_CLK_H/L[7] - // And platform has the following routing: - // CS0 M[B,A]_CLK_H/L[4] - // CS1 M[B,A]_CLK_H/L[2] - // CS2 M[B,A]_CLK_H/L[3] - // CS3 M[B,A]_CLK_H/L[5] - // Then platform can specify the following macro: - // MEMCLK_DIS_MAP(ANY_SOCKET, ANY_CHANNEL, 0x00, 0x00, 0x02, 0x04, 0x01, 0x08, 0x00, 0x00) - // - // CKE_TRI_MAP(SocketID, ChannelID, CKETriBit0CSMap, CKETriBit1CSMap) - // The CKE pins are identified based on BKDG definition of Fn2x9C_0C[CKETri] bitmap. - // AGESA will base on this value to tristate unused CKE to save power. - // - // ODT_TRI_MAP(SocketID, ChannelID, ODTTriBit0CSMap,..., ODTTriBit3CSMap) - // The ODT pins are identified based on BKDG definition of Fn2x9C_0C[ODTTri] bitmap. - // AGESA will base on this value to tristate unused ODT pins to save power. - // - // CS_TRI_MAP(SocketID, ChannelID, CSTriBit0CSMap,..., CSTriBit7CSMap) - // The Chip select pins are identified based on BKDG definition of Fn2x9C_0C[ChipSelTri] bitmap. - // AGESA will base on this value to tristate unused Chip select to save power. - // - // NUMBER_OF_DIMMS_SUPPORTED(SocketID, ChannelID, NumberOfDimmSlotsPerChannel) - // Specifies the number of DIMM slots per channel. - // - // NUMBER_OF_CHIP_SELECTS_SUPPORTED(SocketID, ChannelID, NumberOfChipSelectsPerChannel) - // Specifies the number of Chip selects per channel. - // - // NUMBER_OF_CHANNELS_SUPPORTED(SocketID, NumberOfChannelsPerSocket) - // Specifies the number of channels per socket. - // - // OVERRIDE_DDR_BUS_SPEED(SocketID, ChannelID, USER_MEMORY_TIMING_MODE, MEMORY_BUS_SPEED) - // Specifies DDR bus speed of channel ChannelID on socket SocketID. - // - // DRAM_TECHNOLOGY(SocketID, TECHNOLOGY_TYPE) - // Specifies the DRAM technology type of socket SocketID (DDR2, DDR3,...) - // - // WRITE_LEVELING_SEED(SocketID, ChannelID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, - // Byte6Seed, Byte7Seed, ByteEccSeed) - // Specifies the write leveling seed for a channel of a socket. - // - NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 2), - NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 1), - PSO_END -}; - -/* - * These tables are optional and may be used to adjust memory timing settings - */ -#include "mm.h" -#include "mn.h" diff --git a/src/mainboard/asrock/imb-a180/OemCustomize.c b/src/mainboard/asrock/imb-a180/OemCustomize.c index 63fed83b66..aec1343f02 100644 --- a/src/mainboard/asrock/imb-a180/OemCustomize.c +++ b/src/mainboard/asrock/imb-a180/OemCustomize.c @@ -17,6 +17,7 @@ #include "amdlib.h" #include "Ids.h" #include "heapManager.h" +#include #include "Filecode.h" #include @@ -151,6 +152,37 @@ static AGESA_STATUS OemInitMid(AMD_MID_PARAMS * InitMid) return AGESA_SUCCESS; } +/*---------------------------------------------------------------------------------------- + * CUSTOMER OVERIDES MEMORY TABLE + *---------------------------------------------------------------------------------------- + */ + +/* + * Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA + * (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable + * is populated, AGESA will base its settings on the data from the table. Otherwise, it will + * use its default conservative settings. + */ +CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = { + + #define SEED_A 0x12 + HW_RXEN_SEED( + ANY_SOCKET, CHANNEL_A, ALL_DIMMS, + SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, + SEED_A), + + NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 2), + NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 1), + MOTHER_BOARD_LAYERS (LAYERS_4), + + MEMCLK_DIS_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08, 0x00, 0x00, 0x00, 0x00), + CKE_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08), /* TODO: bit2map, bit3map */ + ODT_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08), + CS_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08, 0x00, 0x00, 0x00, 0x00), + + PSO_END +}; + const struct OEM_HOOK OemCustomize = { .InitEarly = OemInitEarly, .InitMid = OemInitMid, diff --git a/src/mainboard/asrock/imb-a180/buildOpts.c b/src/mainboard/asrock/imb-a180/buildOpts.c index 742646cf4c..a21b55d949 100644 --- a/src/mainboard/asrock/imb-a180/buildOpts.c +++ b/src/mainboard/asrock/imb-a180/buildOpts.c @@ -355,98 +355,3 @@ GPIO_CONTROL imba180_gpio[] = { #include "PlatformInstall.h" -/*---------------------------------------------------------------------------------------- - * CUSTOMER OVERIDES MEMORY TABLE - *---------------------------------------------------------------------------------------- - */ - -/* - * Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA - * (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable - * is populated, AGESA will base its settings on the data from the table. Otherwise, it will - * use its default conservative settings. - */ -CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = { - // - // The following macros are supported (use comma to separate macros): - // - // MEMCLK_DIS_MAP(SocketID, ChannelID, MemClkDisBit0CSMap,..., MemClkDisBit7CSMap) - // The MemClk pins are identified based on BKDG definition of Fn2x88[MemClkDis] bitmap. - // AGESA will base on this value to disable unused MemClk to save power. - // Example: - // BKDG definition of Fn2x88[MemClkDis] bitmap for AM3 package is like below: - // Bit AM3/S1g3 pin name - // 0 M[B,A]_CLK_H/L[0] - // 1 M[B,A]_CLK_H/L[1] - // 2 M[B,A]_CLK_H/L[2] - // 3 M[B,A]_CLK_H/L[3] - // 4 M[B,A]_CLK_H/L[4] - // 5 M[B,A]_CLK_H/L[5] - // 6 M[B,A]_CLK_H/L[6] - // 7 M[B,A]_CLK_H/L[7] - // And platform has the following routing: - // CS0 M[B,A]_CLK_H/L[4] - // CS1 M[B,A]_CLK_H/L[2] - // CS2 M[B,A]_CLK_H/L[3] - // CS3 M[B,A]_CLK_H/L[5] - // Then platform can specify the following macro: - // MEMCLK_DIS_MAP(ANY_SOCKET, ANY_CHANNEL, 0x00, 0x00, 0x02, 0x04, 0x01, 0x08, 0x00, 0x00) - // - // CKE_TRI_MAP(SocketID, ChannelID, CKETriBit0CSMap, CKETriBit1CSMap) - // The CKE pins are identified based on BKDG definition of Fn2x9C_0C[CKETri] bitmap. - // AGESA will base on this value to tristate unused CKE to save power. - // - // ODT_TRI_MAP(SocketID, ChannelID, ODTTriBit0CSMap,..., ODTTriBit3CSMap) - // The ODT pins are identified based on BKDG definition of Fn2x9C_0C[ODTTri] bitmap. - // AGESA will base on this value to tristate unused ODT pins to save power. - // - // CS_TRI_MAP(SocketID, ChannelID, CSTriBit0CSMap,..., CSTriBit7CSMap) - // The Chip select pins are identified based on BKDG definition of Fn2x9C_0C[ChipSelTri] bitmap. - // AGESA will base on this value to tristate unused Chip select to save power. - // - // NUMBER_OF_DIMMS_SUPPORTED(SocketID, ChannelID, NumberOfDimmSlotsPerChannel) - // Specifies the number of DIMM slots per channel. - // - // NUMBER_OF_CHIP_SELECTS_SUPPORTED(SocketID, ChannelID, NumberOfChipSelectsPerChannel) - // Specifies the number of Chip selects per channel. - // - // NUMBER_OF_CHANNELS_SUPPORTED(SocketID, NumberOfChannelsPerSocket) - // Specifies the number of channels per socket. - // - // OVERRIDE_DDR_BUS_SPEED(SocketID, ChannelID, USER_MEMORY_TIMING_MODE, MEMORY_BUS_SPEED) - // Specifies DDR bus speed of channel ChannelID on socket SocketID. - // - // DRAM_TECHNOLOGY(SocketID, TECHNOLOGY_TYPE) - // Specifies the DRAM technology type of socket SocketID (DDR2, DDR3,...) - // - // WRITE_LEVELING_SEED(SocketID, ChannelID, DimmID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, - // Byte6Seed, Byte7Seed, ByteEccSeed) - // Specifies the write leveling seed for a channel of a socket. - // - // HW_RXEN_SEED(SocketID, ChannelID, DimmID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, - // Byte6Seed, Byte7Seed, ByteEccSeed) - // Speicifes the HW RXEN training seed for a channel of a socket - // - #define SEED_A 0x12 - HW_RXEN_SEED( - ANY_SOCKET, CHANNEL_A, ALL_DIMMS, - SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, - SEED_A), - - NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 2), - NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 1), - MOTHER_BOARD_LAYERS (LAYERS_4), - - MEMCLK_DIS_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08, 0x00, 0x00, 0x00, 0x00), - CKE_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08), /* TODO: bit2map, bit3map */ - ODT_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08), - CS_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08, 0x00, 0x00, 0x00, 0x00), - - PSO_END -}; - -/* - * These tables are optional and may be used to adjust memory timing settings - */ -#include "mm.h" -#include "mn.h" diff --git a/src/mainboard/asus/f2a85-m/OemCustomize.c b/src/mainboard/asus/f2a85-m/OemCustomize.c index 469a87b1bc..6348d5a9cb 100644 --- a/src/mainboard/asus/f2a85-m/OemCustomize.c +++ b/src/mainboard/asus/f2a85-m/OemCustomize.c @@ -19,6 +19,7 @@ #include #include +#include #define FILECODE PROC_GNB_PCIE_FAMILY_0X15_F15PCIECOMPLEXCONFIG_FILECODE @@ -199,6 +200,33 @@ static AGESA_STATUS OemInitMid(AMD_MID_PARAMS * InitMid) return AGESA_SUCCESS; } +/*---------------------------------------------------------------------------------------- + * CUSTOMER OVERIDES MEMORY TABLE + *---------------------------------------------------------------------------------------- + */ + +#if IS_ENABLED(CONFIG_BOARD_ASUS_F2A85_M) +/* + * Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA + * (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable + * is populated, AGESA will base its settings on the data from the table. Otherwise, it will + * use its default conservative settings. + */ +CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = { + + NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 2), + NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 2), +/* + TODO: is this OK for DDR3 socket FM2? + MEMCLK_DIS_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00), + CKE_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x05, 0x0A), + ODT_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x00, 0x00), + CS_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00), + */ + PSO_END +}; +#endif /* CONFIG_BOARD_ASUS_F2A85_M */ + const struct OEM_HOOK OemCustomize = { .InitEarly = OemInitEarly, .InitMid = OemInitMid, diff --git a/src/mainboard/asus/f2a85-m/buildOpts.c b/src/mainboard/asus/f2a85-m/buildOpts.c index 83f96f9276..17ce5d25b8 100644 --- a/src/mainboard/asus/f2a85-m/buildOpts.c +++ b/src/mainboard/asus/f2a85-m/buildOpts.c @@ -358,87 +358,3 @@ GPIO_CONTROL f2a85_m_gpio[] = { /* Moving this include up will break AGESA. */ #include -/*---------------------------------------------------------------------------------------- - * CUSTOMER OVERIDES MEMORY TABLE - *---------------------------------------------------------------------------------------- - */ - -/* - * Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA - * (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable - * is populated, AGESA will base its settings on the data from the table. Otherwise, it will - * use its default conservative settings. - */ -CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = { - // - // The following macros are supported (use comma to separate macros): - // - // MEMCLK_DIS_MAP(SocketID, ChannelID, MemClkDisBit0CSMap,..., MemClkDisBit7CSMap) - // The MemClk pins are identified based on BKDG definition of Fn2x88[MemClkDis] bitmap. - // AGESA will base on this value to disable unused MemClk to save power. - // Example: - // BKDG definition of Fn2x88[MemClkDis] bitmap for AM3 package is like below: - // Bit AM3/S1g3 pin name - // 0 M[B,A]_CLK_H/L[0] - // 1 M[B,A]_CLK_H/L[1] - // 2 M[B,A]_CLK_H/L[2] - // 3 M[B,A]_CLK_H/L[3] - // 4 M[B,A]_CLK_H/L[4] - // 5 M[B,A]_CLK_H/L[5] - // 6 M[B,A]_CLK_H/L[6] - // 7 M[B,A]_CLK_H/L[7] - // And platform has the following routing: - // CS0 M[B,A]_CLK_H/L[4] - // CS1 M[B,A]_CLK_H/L[2] - // CS2 M[B,A]_CLK_H/L[3] - // CS3 M[B,A]_CLK_H/L[5] - // Then platform can specify the following macro: - // MEMCLK_DIS_MAP(ANY_SOCKET, ANY_CHANNEL, 0x00, 0x00, 0x02, 0x04, 0x01, 0x08, 0x00, 0x00) - // - // CKE_TRI_MAP(SocketID, ChannelID, CKETriBit0CSMap, CKETriBit1CSMap) - // The CKE pins are identified based on BKDG definition of Fn2x9C_0C[CKETri] bitmap. - // AGESA will base on this value to tristate unused CKE to save power. - // - // ODT_TRI_MAP(SocketID, ChannelID, ODTTriBit0CSMap,..., ODTTriBit3CSMap) - // The ODT pins are identified based on BKDG definition of Fn2x9C_0C[ODTTri] bitmap. - // AGESA will base on this value to tristate unused ODT pins to save power. - // - // CS_TRI_MAP(SocketID, ChannelID, CSTriBit0CSMap,..., CSTriBit7CSMap) - // The Chip select pins are identified based on BKDG definition of Fn2x9C_0C[ChipSelTri] bitmap. - // AGESA will base on this value to tristate unused Chip select to save power. - // - // NUMBER_OF_DIMMS_SUPPORTED(SocketID, ChannelID, NumberOfDimmSlotsPerChannel) - // Specifies the number of DIMM slots per channel. - // - // NUMBER_OF_CHIP_SELECTS_SUPPORTED(SocketID, ChannelID, NumberOfChipSelectsPerChannel) - // Specifies the number of Chip selects per channel. - // - // NUMBER_OF_CHANNELS_SUPPORTED(SocketID, NumberOfChannelsPerSocket) - // Specifies the number of channels per socket. - // - // OVERRIDE_DDR_BUS_SPEED(SocketID, ChannelID, USER_MEMORY_TIMING_MODE, MEMORY_BUS_SPEED) - // Specifies DDR bus speed of channel ChannelID on socket SocketID. - // - // DRAM_TECHNOLOGY(SocketID, TECHNOLOGY_TYPE) - // Specifies the DRAM technology type of socket SocketID (DDR2, DDR3,...) - // - // WRITE_LEVELING_SEED(SocketID, ChannelID, DimmID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, - // Byte6Seed, Byte7Seed, ByteEccSeed) - // Specifies the write leveling seed for a channel of a socket. - // - // HW_RXEN_SEED(SocketID, ChannelID, DimmID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, - // Byte6Seed, Byte7Seed, ByteEccSeed) - // Speicifes the HW RXEN training seed for a channel of a socket - // - - NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 2), - NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 2), -/* - TODO: is this OK for DDR3 socket FM2? - MEMCLK_DIS_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00), - CKE_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x05, 0x0A), - ODT_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x00, 0x00), - CS_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00), - */ - PSO_END -}; diff --git a/src/mainboard/asus/f2a85-m_le/OemCustomize.c b/src/mainboard/asus/f2a85-m_le/OemCustomize.c index c8a48d9319..ea1c8716ee 100644 --- a/src/mainboard/asus/f2a85-m_le/OemCustomize.c +++ b/src/mainboard/asus/f2a85-m_le/OemCustomize.c @@ -1 +1,28 @@ #include "../f2a85-m/OemCustomize.c" +/*---------------------------------------------------------------------------------------- + * CUSTOMER OVERIDES MEMORY TABLE + *---------------------------------------------------------------------------------------- + */ + +#if IS_ENABLED(CONFIG_BOARD_ASUS_F2A85_M_LE) +/* + * Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA + * (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable + * is populated, AGESA will base its settings on the data from the table. Otherwise, it will + * use its default conservative settings. + */ +CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = { + + NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 1), + NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 2), + +/* + TODO: is this OK for DDR3 socket FM2? + MEMCLK_DIS_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00), + CKE_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x05, 0x0A), + ODT_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x00, 0x00), + CS_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00), + */ + PSO_END +}; +#endif /* CONFIG_BOARD_ASUS_F2A85M_LE */ diff --git a/src/mainboard/asus/f2a85-m_le/buildOpts.c b/src/mainboard/asus/f2a85-m_le/buildOpts.c index c6810f1052..8233482f62 100644 --- a/src/mainboard/asus/f2a85-m_le/buildOpts.c +++ b/src/mainboard/asus/f2a85-m_le/buildOpts.c @@ -358,88 +358,3 @@ GPIO_CONTROL f2a85_m_gpio[] = { /* Moving this include up will break AGESA. */ #include -/*---------------------------------------------------------------------------------------- - * CUSTOMER OVERIDES MEMORY TABLE - *---------------------------------------------------------------------------------------- - */ - -/* - * Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA - * (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable - * is populated, AGESA will base its settings on the data from the table. Otherwise, it will - * use its default conservative settings. - */ -CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = { - // - // The following macros are supported (use comma to separate macros): - // - // MEMCLK_DIS_MAP(SocketID, ChannelID, MemClkDisBit0CSMap,..., MemClkDisBit7CSMap) - // The MemClk pins are identified based on BKDG definition of Fn2x88[MemClkDis] bitmap. - // AGESA will base on this value to disable unused MemClk to save power. - // Example: - // BKDG definition of Fn2x88[MemClkDis] bitmap for AM3 package is like below: - // Bit AM3/S1g3 pin name - // 0 M[B,A]_CLK_H/L[0] - // 1 M[B,A]_CLK_H/L[1] - // 2 M[B,A]_CLK_H/L[2] - // 3 M[B,A]_CLK_H/L[3] - // 4 M[B,A]_CLK_H/L[4] - // 5 M[B,A]_CLK_H/L[5] - // 6 M[B,A]_CLK_H/L[6] - // 7 M[B,A]_CLK_H/L[7] - // And platform has the following routing: - // CS0 M[B,A]_CLK_H/L[4] - // CS1 M[B,A]_CLK_H/L[2] - // CS2 M[B,A]_CLK_H/L[3] - // CS3 M[B,A]_CLK_H/L[5] - // Then platform can specify the following macro: - // MEMCLK_DIS_MAP(ANY_SOCKET, ANY_CHANNEL, 0x00, 0x00, 0x02, 0x04, 0x01, 0x08, 0x00, 0x00) - // - // CKE_TRI_MAP(SocketID, ChannelID, CKETriBit0CSMap, CKETriBit1CSMap) - // The CKE pins are identified based on BKDG definition of Fn2x9C_0C[CKETri] bitmap. - // AGESA will base on this value to tristate unused CKE to save power. - // - // ODT_TRI_MAP(SocketID, ChannelID, ODTTriBit0CSMap,..., ODTTriBit3CSMap) - // The ODT pins are identified based on BKDG definition of Fn2x9C_0C[ODTTri] bitmap. - // AGESA will base on this value to tristate unused ODT pins to save power. - // - // CS_TRI_MAP(SocketID, ChannelID, CSTriBit0CSMap,..., CSTriBit7CSMap) - // The Chip select pins are identified based on BKDG definition of Fn2x9C_0C[ChipSelTri] bitmap. - // AGESA will base on this value to tristate unused Chip select to save power. - // - // NUMBER_OF_DIMMS_SUPPORTED(SocketID, ChannelID, NumberOfDimmSlotsPerChannel) - // Specifies the number of DIMM slots per channel. - // - // NUMBER_OF_CHIP_SELECTS_SUPPORTED(SocketID, ChannelID, NumberOfChipSelectsPerChannel) - // Specifies the number of Chip selects per channel. - // - // NUMBER_OF_CHANNELS_SUPPORTED(SocketID, NumberOfChannelsPerSocket) - // Specifies the number of channels per socket. - // - // OVERRIDE_DDR_BUS_SPEED(SocketID, ChannelID, USER_MEMORY_TIMING_MODE, MEMORY_BUS_SPEED) - // Specifies DDR bus speed of channel ChannelID on socket SocketID. - // - // DRAM_TECHNOLOGY(SocketID, TECHNOLOGY_TYPE) - // Specifies the DRAM technology type of socket SocketID (DDR2, DDR3,...) - // - // WRITE_LEVELING_SEED(SocketID, ChannelID, DimmID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, - // Byte6Seed, Byte7Seed, ByteEccSeed) - // Specifies the write leveling seed for a channel of a socket. - // - // HW_RXEN_SEED(SocketID, ChannelID, DimmID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, - // Byte6Seed, Byte7Seed, ByteEccSeed) - // Speicifes the HW RXEN training seed for a channel of a socket - // - - NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 1), - NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 2), - -/* - TODO: is this OK for DDR3 socket FM2? - MEMCLK_DIS_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00), - CKE_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x05, 0x0A), - ODT_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x00, 0x00), - CS_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00), - */ - PSO_END -}; diff --git a/src/mainboard/bap/ode_e20XX/OemCustomize.c b/src/mainboard/bap/ode_e20XX/OemCustomize.c index ec0c3d3d92..7feab3a4cb 100644 --- a/src/mainboard/bap/ode_e20XX/OemCustomize.c +++ b/src/mainboard/bap/ode_e20XX/OemCustomize.c @@ -17,6 +17,7 @@ #include "amdlib.h" #include "Ids.h" #include "heapManager.h" +#include #include "Filecode.h" #include @@ -145,6 +146,43 @@ static AGESA_STATUS OemInitMid(AMD_MID_PARAMS * InitMid) return AGESA_SUCCESS; } +/*---------------------------------------------------------------------------------------- + * CUSTOMER OVERIDES MEMORY TABLE + *---------------------------------------------------------------------------------------- + */ + +/* + * Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA + * (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable + * is populated, AGESA will base its settings on the data from the table. Otherwise, it will + * use its default conservative settings. + */ +CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = { + + #define SEED_WL 0x0E + WRITE_LEVELING_SEED( + ANY_SOCKET, CHANNEL_A, ALL_DIMMS, + SEED_WL,SEED_WL,SEED_WL,SEED_WL,SEED_WL,SEED_WL,SEED_WL,SEED_WL, + SEED_WL), + + #define SEED_A 0x12 + HW_RXEN_SEED( + ANY_SOCKET, CHANNEL_A, ALL_DIMMS, + SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, + SEED_A), + + NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 1), + NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 1), + MOTHER_BOARD_LAYERS (LAYERS_6), + + MEMCLK_DIS_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00), + CKE_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08), /* TODO: bit2map, bit3map */ + ODT_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08), + CS_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08, 0x00, 0x00, 0x00, 0x00), + + PSO_END +}; + const struct OEM_HOOK OemCustomize = { .InitEarly = OemInitEarly, .InitMid = OemInitMid, diff --git a/src/mainboard/bap/ode_e20XX/buildOpts.c b/src/mainboard/bap/ode_e20XX/buildOpts.c index 8162d428a8..80cb79f62b 100644 --- a/src/mainboard/bap/ode_e20XX/buildOpts.c +++ b/src/mainboard/bap/ode_e20XX/buildOpts.c @@ -357,105 +357,3 @@ GPIO_CONTROL gizmo2_gpio[] = { #include "PlatformInstall.h" -/*---------------------------------------------------------------------------------------- - * CUSTOMER OVERIDES MEMORY TABLE - *---------------------------------------------------------------------------------------- - */ - -/* - * Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA - * (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable - * is populated, AGESA will base its settings on the data from the table. Otherwise, it will - * use its default conservative settings. - */ -CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = { - // - // The following macros are supported (use comma to separate macros): - // - // MEMCLK_DIS_MAP(SocketID, ChannelID, MemClkDisBit0CSMap,..., MemClkDisBit7CSMap) - // The MemClk pins are identified based on BKDG definition of Fn2x88[MemClkDis] bitmap. - // AGESA will base on this value to disable unused MemClk to save power. - // Example: - // BKDG definition of Fn2x88[MemClkDis] bitmap for AM3 package is like below: - // Bit AM3/S1g3 pin name - // 0 M[B,A]_CLK_H/L[0] - // 1 M[B,A]_CLK_H/L[1] - // 2 M[B,A]_CLK_H/L[2] - // 3 M[B,A]_CLK_H/L[3] - // 4 M[B,A]_CLK_H/L[4] - // 5 M[B,A]_CLK_H/L[5] - // 6 M[B,A]_CLK_H/L[6] - // 7 M[B,A]_CLK_H/L[7] - // And platform has the following routing: - // CS0 M[B,A]_CLK_H/L[4] - // CS1 M[B,A]_CLK_H/L[2] - // CS2 M[B,A]_CLK_H/L[3] - // CS3 M[B,A]_CLK_H/L[5] - // Then platform can specify the following macro: - // MEMCLK_DIS_MAP(ANY_SOCKET, ANY_CHANNEL, 0x00, 0x00, 0x02, 0x04, 0x01, 0x08, 0x00, 0x00) - // - // CKE_TRI_MAP(SocketID, ChannelID, CKETriBit0CSMap, CKETriBit1CSMap) - // The CKE pins are identified based on BKDG definition of Fn2x9C_0C[CKETri] bitmap. - // AGESA will base on this value to tristate unused CKE to save power. - // - // ODT_TRI_MAP(SocketID, ChannelID, ODTTriBit0CSMap,..., ODTTriBit3CSMap) - // The ODT pins are identified based on BKDG definition of Fn2x9C_0C[ODTTri] bitmap. - // AGESA will base on this value to tristate unused ODT pins to save power. - // - // CS_TRI_MAP(SocketID, ChannelID, CSTriBit0CSMap,..., CSTriBit7CSMap) - // The Chip select pins are identified based on BKDG definition of Fn2x9C_0C[ChipSelTri] bitmap. - // AGESA will base on this value to tristate unused Chip select to save power. - // - // NUMBER_OF_DIMMS_SUPPORTED(SocketID, ChannelID, NumberOfDimmSlotsPerChannel) - // Specifies the number of DIMM slots per channel. - // - // NUMBER_OF_CHIP_SELECTS_SUPPORTED(SocketID, ChannelID, NumberOfChipSelectsPerChannel) - // Specifies the number of Chip selects per channel. - // - // NUMBER_OF_CHANNELS_SUPPORTED(SocketID, NumberOfChannelsPerSocket) - // Specifies the number of channels per socket. - // - // OVERRIDE_DDR_BUS_SPEED(SocketID, ChannelID, USER_MEMORY_TIMING_MODE, MEMORY_BUS_SPEED) - // Specifies DDR bus speed of channel ChannelID on socket SocketID. - // - // DRAM_TECHNOLOGY(SocketID, TECHNOLOGY_TYPE) - // Specifies the DRAM technology type of socket SocketID (DDR2, DDR3,...) - // - // WRITE_LEVELING_SEED(SocketID, ChannelID, DimmID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, - // Byte6Seed, Byte7Seed, ByteEccSeed) - // Specifies the write leveling seed for a channel of a socket. - // - // HW_RXEN_SEED(SocketID, ChannelID, DimmID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, - // Byte6Seed, Byte7Seed, ByteEccSeed) - // Speicifes the HW RXEN training seed for a channel of a socket - // - - #define SEED_WL 0x0E - WRITE_LEVELING_SEED( - ANY_SOCKET, CHANNEL_A, ALL_DIMMS, - SEED_WL,SEED_WL,SEED_WL,SEED_WL,SEED_WL,SEED_WL,SEED_WL,SEED_WL, - SEED_WL), - - #define SEED_A 0x12 - HW_RXEN_SEED( - ANY_SOCKET, CHANNEL_A, ALL_DIMMS, - SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, - SEED_A), - - NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 1), - NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 1), - MOTHER_BOARD_LAYERS (LAYERS_6), - - MEMCLK_DIS_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00), - CKE_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08), /* TODO: bit2map, bit3map */ - ODT_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08), - CS_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08, 0x00, 0x00, 0x00, 0x00), - - PSO_END -}; - -/* - * These tables are optional and may be used to adjust memory timing settings - */ -#include "mm.h" -#include "mn.h" diff --git a/src/mainboard/biostar/am1ml/OemCustomize.c b/src/mainboard/biostar/am1ml/OemCustomize.c index 63fed83b66..c44a9944c2 100644 --- a/src/mainboard/biostar/am1ml/OemCustomize.c +++ b/src/mainboard/biostar/am1ml/OemCustomize.c @@ -17,6 +17,7 @@ #include "amdlib.h" #include "Ids.h" #include "heapManager.h" +#include #include "Filecode.h" #include @@ -151,6 +152,36 @@ static AGESA_STATUS OemInitMid(AMD_MID_PARAMS * InitMid) return AGESA_SUCCESS; } +/*---------------------------------------------------------------------------------------- + * CUSTOMER OVERIDES MEMORY TABLE + *---------------------------------------------------------------------------------------- + */ + +/* + * Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA + * (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable + * is populated, AGESA will base its settings on the data from the table. Otherwise, it will + * use its default conservative settings. + */ +CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = { + #define SEED_A 0x12 + HW_RXEN_SEED( + ANY_SOCKET, CHANNEL_A, ALL_DIMMS, + SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, + SEED_A), + + NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 2), + NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 1), + MOTHER_BOARD_LAYERS (LAYERS_4), + + MEMCLK_DIS_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08, 0x00, 0x00, 0x00, 0x00), + CKE_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08), /* TODO: bit2map, bit3map */ + ODT_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08), + CS_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08, 0x00, 0x00, 0x00, 0x00), + + PSO_END +}; + const struct OEM_HOOK OemCustomize = { .InitEarly = OemInitEarly, .InitMid = OemInitMid, diff --git a/src/mainboard/biostar/am1ml/buildOpts.c b/src/mainboard/biostar/am1ml/buildOpts.c index 075fe5702f..4f910dfc05 100644 --- a/src/mainboard/biostar/am1ml/buildOpts.c +++ b/src/mainboard/biostar/am1ml/buildOpts.c @@ -355,98 +355,3 @@ GPIO_CONTROL imba180_gpio[] = { #include "PlatformInstall.h" -/*---------------------------------------------------------------------------------------- - * CUSTOMER OVERIDES MEMORY TABLE - *---------------------------------------------------------------------------------------- - */ - -/* - * Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA - * (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable - * is populated, AGESA will base its settings on the data from the table. Otherwise, it will - * use its default conservative settings. - */ -CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = { - // - // The following macros are supported (use comma to separate macros): - // - // MEMCLK_DIS_MAP(SocketID, ChannelID, MemClkDisBit0CSMap,..., MemClkDisBit7CSMap) - // The MemClk pins are identified based on BKDG definition of Fn2x88[MemClkDis] bitmap. - // AGESA will base on this value to disable unused MemClk to save power. - // Example: - // BKDG definition of Fn2x88[MemClkDis] bitmap for AM3 package is like below: - // Bit AM3/S1g3 pin name - // 0 M[B,A]_CLK_H/L[0] - // 1 M[B,A]_CLK_H/L[1] - // 2 M[B,A]_CLK_H/L[2] - // 3 M[B,A]_CLK_H/L[3] - // 4 M[B,A]_CLK_H/L[4] - // 5 M[B,A]_CLK_H/L[5] - // 6 M[B,A]_CLK_H/L[6] - // 7 M[B,A]_CLK_H/L[7] - // And platform has the following routing: - // CS0 M[B,A]_CLK_H/L[4] - // CS1 M[B,A]_CLK_H/L[2] - // CS2 M[B,A]_CLK_H/L[3] - // CS3 M[B,A]_CLK_H/L[5] - // Then platform can specify the following macro: - // MEMCLK_DIS_MAP(ANY_SOCKET, ANY_CHANNEL, 0x00, 0x00, 0x02, 0x04, 0x01, 0x08, 0x00, 0x00) - // - // CKE_TRI_MAP(SocketID, ChannelID, CKETriBit0CSMap, CKETriBit1CSMap) - // The CKE pins are identified based on BKDG definition of Fn2x9C_0C[CKETri] bitmap. - // AGESA will base on this value to tristate unused CKE to save power. - // - // ODT_TRI_MAP(SocketID, ChannelID, ODTTriBit0CSMap,..., ODTTriBit3CSMap) - // The ODT pins are identified based on BKDG definition of Fn2x9C_0C[ODTTri] bitmap. - // AGESA will base on this value to tristate unused ODT pins to save power. - // - // CS_TRI_MAP(SocketID, ChannelID, CSTriBit0CSMap,..., CSTriBit7CSMap) - // The Chip select pins are identified based on BKDG definition of Fn2x9C_0C[ChipSelTri] bitmap. - // AGESA will base on this value to tristate unused Chip select to save power. - // - // NUMBER_OF_DIMMS_SUPPORTED(SocketID, ChannelID, NumberOfDimmSlotsPerChannel) - // Specifies the number of DIMM slots per channel. - // - // NUMBER_OF_CHIP_SELECTS_SUPPORTED(SocketID, ChannelID, NumberOfChipSelectsPerChannel) - // Specifies the number of Chip selects per channel. - // - // NUMBER_OF_CHANNELS_SUPPORTED(SocketID, NumberOfChannelsPerSocket) - // Specifies the number of channels per socket. - // - // OVERRIDE_DDR_BUS_SPEED(SocketID, ChannelID, USER_MEMORY_TIMING_MODE, MEMORY_BUS_SPEED) - // Specifies DDR bus speed of channel ChannelID on socket SocketID. - // - // DRAM_TECHNOLOGY(SocketID, TECHNOLOGY_TYPE) - // Specifies the DRAM technology type of socket SocketID (DDR2, DDR3,...) - // - // WRITE_LEVELING_SEED(SocketID, ChannelID, DimmID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, - // Byte6Seed, Byte7Seed, ByteEccSeed) - // Specifies the write leveling seed for a channel of a socket. - // - // HW_RXEN_SEED(SocketID, ChannelID, DimmID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, - // Byte6Seed, Byte7Seed, ByteEccSeed) - // Speicifes the HW RXEN training seed for a channel of a socket - // - #define SEED_A 0x12 - HW_RXEN_SEED( - ANY_SOCKET, CHANNEL_A, ALL_DIMMS, - SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, - SEED_A), - - NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 2), - NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 1), - MOTHER_BOARD_LAYERS (LAYERS_4), - - MEMCLK_DIS_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08, 0x00, 0x00, 0x00, 0x00), - CKE_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08), /* TODO: bit2map, bit3map */ - ODT_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08), - CS_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08, 0x00, 0x00, 0x00, 0x00), - - PSO_END -}; - -/* - * These tables are optional and may be used to adjust memory timing settings - */ -#include "mm.h" -#include "mn.h" diff --git a/src/mainboard/gizmosphere/gizmo/OemCustomize.c b/src/mainboard/gizmosphere/gizmo/OemCustomize.c index c85430ddb4..2184fb2c88 100644 --- a/src/mainboard/gizmosphere/gizmo/OemCustomize.c +++ b/src/mainboard/gizmosphere/gizmo/OemCustomize.c @@ -18,6 +18,7 @@ #include "amdlib.h" #include "Ids.h" #include "heapManager.h" +#include #include "PlatformGnbPcieComplex.h" #include "Filecode.h" @@ -139,6 +140,34 @@ PCIe_COMPLEX_DESCRIPTOR Brazos = { return AGESA_SUCCESS; } +/*---------------------------------------------------------------------------------------- + * CUSTOMER OVERIDES MEMORY TABLE + *---------------------------------------------------------------------------------------- + */ + +/* + * Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA + * (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable + * is populated, AGESA will base its settings on the data from the table. Otherwise, it will + * use its default conservative settings. + */ +CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = { + + NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, TWO_DIMM), + NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, ONE_DIMM), + + // Gizmos soldered down memory uses memory CLK0 and CLK1 on CS0 + MEMCLK_DIS_MAP(ANY_SOCKET, ANY_CHANNEL, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00), + + // Gizmos soldered down memory requires different seeds +#define WLSEED 0x08 +#define RXSEED 0x40 + WRITE_LEVELING_SEED(ANY_SOCKET, ANY_CHANNEL, WLSEED, WLSEED, WLSEED, WLSEED, WLSEED, WLSEED, WLSEED, WLSEED, WLSEED), + HW_RXEN_SEED( ANY_SOCKET, ANY_CHANNEL, RXSEED, RXSEED, RXSEED, RXSEED, RXSEED, RXSEED, RXSEED, RXSEED, RXSEED), + + PSO_END +}; + const struct OEM_HOOK OemCustomize = { .InitEarly = OemInitEarly, }; diff --git a/src/mainboard/gizmosphere/gizmo/buildOpts.c b/src/mainboard/gizmosphere/gizmo/buildOpts.c index 827980280b..c838baba9a 100644 --- a/src/mainboard/gizmosphere/gizmo/buildOpts.c +++ b/src/mainboard/gizmosphere/gizmo/buildOpts.c @@ -312,92 +312,3 @@ CONST AP_MTRR_SETTINGS ROMDATA OntarioApMtrrSettingsList[] = // Instantiate all solution relevant data. #include "PlatformInstall.h" -/*---------------------------------------------------------------------------------------- - * CUSTOMER OVERIDES MEMORY TABLE - *---------------------------------------------------------------------------------------- - */ - -/* - * Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA - * (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable - * is populated, AGESA will base its settings on the data from the table. Otherwise, it will - * use its default conservative settings. - */ -CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = { - // - // The following macros are supported (use comma to separate macros): - // - // MEMCLK_DIS_MAP(SocketID, ChannelID, MemClkDisBit0CSMap,..., MemClkDisBit7CSMap) - // The MemClk pins are identified based on BKDG definition of Fn2x88[MemClkDis] bitmap. - // AGESA will base on this value to disable unused MemClk to save power. - // Example: - // BKDG definition of Fn2x88[MemClkDis] bitmap for AM3 package is like below: - // Bit AM3/S1g3 pin name - // 0 M[B,A]_CLK_H/L[0] - // 1 M[B,A]_CLK_H/L[1] - // 2 M[B,A]_CLK_H/L[2] - // 3 M[B,A]_CLK_H/L[3] - // 4 M[B,A]_CLK_H/L[4] - // 5 M[B,A]_CLK_H/L[5] - // 6 M[B,A]_CLK_H/L[6] - // 7 M[B,A]_CLK_H/L[7] - // And platform has the following routing: - // CS0 M[B,A]_CLK_H/L[4] - // CS1 M[B,A]_CLK_H/L[2] - // CS2 M[B,A]_CLK_H/L[3] - // CS3 M[B,A]_CLK_H/L[5] - // Then platform can specify the following macro: - // MEMCLK_DIS_MAP(ANY_SOCKET, ANY_CHANNEL, 0x00, 0x00, 0x02, 0x04, 0x01, 0x08, 0x00, 0x00) - // - // CKE_TRI_MAP(SocketID, ChannelID, CKETriBit0CSMap, CKETriBit1CSMap) - // The CKE pins are identified based on BKDG definition of Fn2x9C_0C[CKETri] bitmap. - // AGESA will base on this value to tristate unused CKE to save power. - // - // ODT_TRI_MAP(SocketID, ChannelID, ODTTriBit0CSMap,..., ODTTriBit3CSMap) - // The ODT pins are identified based on BKDG definition of Fn2x9C_0C[ODTTri] bitmap. - // AGESA will base on this value to tristate unused ODT pins to save power. - // - // CS_TRI_MAP(SocketID, ChannelID, CSTriBit0CSMap,..., CSTriBit7CSMap) - // The Chip select pins are identified based on BKDG definition of Fn2x9C_0C[ChipSelTri] bitmap. - // AGESA will base on this value to tristate unused Chip select to save power. - // - // NUMBER_OF_DIMMS_SUPPORTED(SocketID, ChannelID, NumberOfDimmSlotsPerChannel) - // Specifies the number of DIMM slots per channel. - // - // NUMBER_OF_CHIP_SELECTS_SUPPORTED(SocketID, ChannelID, NumberOfChipSelectsPerChannel) - // Specifies the number of Chip selects per channel. - // - // NUMBER_OF_CHANNELS_SUPPORTED(SocketID, NumberOfChannelsPerSocket) - // Specifies the number of channels per socket. - // - // OVERRIDE_DDR_BUS_SPEED(SocketID, ChannelID, USER_MEMORY_TIMING_MODE, MEMORY_BUS_SPEED) - // Specifies DDR bus speed of channel ChannelID on socket SocketID. - // - // DRAM_TECHNOLOGY(SocketID, TECHNOLOGY_TYPE) - // Specifies the DRAM technology type of socket SocketID (DDR2, DDR3,...) - // - // WRITE_LEVELING_SEED(SocketID, ChannelID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, - // Byte6Seed, Byte7Seed, ByteEccSeed) - // Specifies the write leveling seed for a channel of a socket. - // - - NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, TWO_DIMM), - NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, ONE_DIMM), - - // Gizmos soldered down memory uses memory CLK0 and CLK1 on CS0 - MEMCLK_DIS_MAP(ANY_SOCKET, ANY_CHANNEL, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00), - - // Gizmos soldered down memory requires different seeds -#define WLSEED 0x08 -#define RXSEED 0x40 - WRITE_LEVELING_SEED(ANY_SOCKET, ANY_CHANNEL, WLSEED, WLSEED, WLSEED, WLSEED, WLSEED, WLSEED, WLSEED, WLSEED, WLSEED), - HW_RXEN_SEED( ANY_SOCKET, ANY_CHANNEL, RXSEED, RXSEED, RXSEED, RXSEED, RXSEED, RXSEED, RXSEED, RXSEED, RXSEED), - - PSO_END -}; - -/* - * These tables are optional and may be used to adjust memory timing settings - */ -#include "mm.h" -#include "mn.h" diff --git a/src/mainboard/gizmosphere/gizmo2/OemCustomize.c b/src/mainboard/gizmosphere/gizmo2/OemCustomize.c index 1d71f897f2..933b036a45 100644 --- a/src/mainboard/gizmosphere/gizmo2/OemCustomize.c +++ b/src/mainboard/gizmosphere/gizmo2/OemCustomize.c @@ -17,6 +17,7 @@ #include "amdlib.h" #include "Ids.h" #include "heapManager.h" +#include #include "Filecode.h" #include @@ -145,6 +146,43 @@ static AGESA_STATUS OemInitMid(AMD_MID_PARAMS * InitMid) return AGESA_SUCCESS; } +/*---------------------------------------------------------------------------------------- + * CUSTOMER OVERIDES MEMORY TABLE + *---------------------------------------------------------------------------------------- + */ + +/* + * Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA + * (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable + * is populated, AGESA will base its settings on the data from the table. Otherwise, it will + * use its default conservative settings. + */ +CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = { + + #define SEED_WL 0x0E + WRITE_LEVELING_SEED( + ANY_SOCKET, CHANNEL_A, ALL_DIMMS, + SEED_WL,SEED_WL,SEED_WL,SEED_WL,SEED_WL,SEED_WL,SEED_WL,SEED_WL, + SEED_WL), + + #define SEED_A 0x12 + HW_RXEN_SEED( + ANY_SOCKET, CHANNEL_A, ALL_DIMMS, + SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, + SEED_A), + + NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 1), + NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 1), + MOTHER_BOARD_LAYERS (LAYERS_6), + + MEMCLK_DIS_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00), + CKE_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08), /* TODO: bit2map, bit3map */ + ODT_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08), + CS_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08, 0x00, 0x00, 0x00, 0x00), + + PSO_END +}; + const struct OEM_HOOK OemCustomize = { .InitEarly = OemInitEarly, .InitMid = OemInitMid, diff --git a/src/mainboard/gizmosphere/gizmo2/buildOpts.c b/src/mainboard/gizmosphere/gizmo2/buildOpts.c index 8162d428a8..80cb79f62b 100644 --- a/src/mainboard/gizmosphere/gizmo2/buildOpts.c +++ b/src/mainboard/gizmosphere/gizmo2/buildOpts.c @@ -357,105 +357,3 @@ GPIO_CONTROL gizmo2_gpio[] = { #include "PlatformInstall.h" -/*---------------------------------------------------------------------------------------- - * CUSTOMER OVERIDES MEMORY TABLE - *---------------------------------------------------------------------------------------- - */ - -/* - * Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA - * (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable - * is populated, AGESA will base its settings on the data from the table. Otherwise, it will - * use its default conservative settings. - */ -CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = { - // - // The following macros are supported (use comma to separate macros): - // - // MEMCLK_DIS_MAP(SocketID, ChannelID, MemClkDisBit0CSMap,..., MemClkDisBit7CSMap) - // The MemClk pins are identified based on BKDG definition of Fn2x88[MemClkDis] bitmap. - // AGESA will base on this value to disable unused MemClk to save power. - // Example: - // BKDG definition of Fn2x88[MemClkDis] bitmap for AM3 package is like below: - // Bit AM3/S1g3 pin name - // 0 M[B,A]_CLK_H/L[0] - // 1 M[B,A]_CLK_H/L[1] - // 2 M[B,A]_CLK_H/L[2] - // 3 M[B,A]_CLK_H/L[3] - // 4 M[B,A]_CLK_H/L[4] - // 5 M[B,A]_CLK_H/L[5] - // 6 M[B,A]_CLK_H/L[6] - // 7 M[B,A]_CLK_H/L[7] - // And platform has the following routing: - // CS0 M[B,A]_CLK_H/L[4] - // CS1 M[B,A]_CLK_H/L[2] - // CS2 M[B,A]_CLK_H/L[3] - // CS3 M[B,A]_CLK_H/L[5] - // Then platform can specify the following macro: - // MEMCLK_DIS_MAP(ANY_SOCKET, ANY_CHANNEL, 0x00, 0x00, 0x02, 0x04, 0x01, 0x08, 0x00, 0x00) - // - // CKE_TRI_MAP(SocketID, ChannelID, CKETriBit0CSMap, CKETriBit1CSMap) - // The CKE pins are identified based on BKDG definition of Fn2x9C_0C[CKETri] bitmap. - // AGESA will base on this value to tristate unused CKE to save power. - // - // ODT_TRI_MAP(SocketID, ChannelID, ODTTriBit0CSMap,..., ODTTriBit3CSMap) - // The ODT pins are identified based on BKDG definition of Fn2x9C_0C[ODTTri] bitmap. - // AGESA will base on this value to tristate unused ODT pins to save power. - // - // CS_TRI_MAP(SocketID, ChannelID, CSTriBit0CSMap,..., CSTriBit7CSMap) - // The Chip select pins are identified based on BKDG definition of Fn2x9C_0C[ChipSelTri] bitmap. - // AGESA will base on this value to tristate unused Chip select to save power. - // - // NUMBER_OF_DIMMS_SUPPORTED(SocketID, ChannelID, NumberOfDimmSlotsPerChannel) - // Specifies the number of DIMM slots per channel. - // - // NUMBER_OF_CHIP_SELECTS_SUPPORTED(SocketID, ChannelID, NumberOfChipSelectsPerChannel) - // Specifies the number of Chip selects per channel. - // - // NUMBER_OF_CHANNELS_SUPPORTED(SocketID, NumberOfChannelsPerSocket) - // Specifies the number of channels per socket. - // - // OVERRIDE_DDR_BUS_SPEED(SocketID, ChannelID, USER_MEMORY_TIMING_MODE, MEMORY_BUS_SPEED) - // Specifies DDR bus speed of channel ChannelID on socket SocketID. - // - // DRAM_TECHNOLOGY(SocketID, TECHNOLOGY_TYPE) - // Specifies the DRAM technology type of socket SocketID (DDR2, DDR3,...) - // - // WRITE_LEVELING_SEED(SocketID, ChannelID, DimmID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, - // Byte6Seed, Byte7Seed, ByteEccSeed) - // Specifies the write leveling seed for a channel of a socket. - // - // HW_RXEN_SEED(SocketID, ChannelID, DimmID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, - // Byte6Seed, Byte7Seed, ByteEccSeed) - // Speicifes the HW RXEN training seed for a channel of a socket - // - - #define SEED_WL 0x0E - WRITE_LEVELING_SEED( - ANY_SOCKET, CHANNEL_A, ALL_DIMMS, - SEED_WL,SEED_WL,SEED_WL,SEED_WL,SEED_WL,SEED_WL,SEED_WL,SEED_WL, - SEED_WL), - - #define SEED_A 0x12 - HW_RXEN_SEED( - ANY_SOCKET, CHANNEL_A, ALL_DIMMS, - SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, - SEED_A), - - NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 1), - NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 1), - MOTHER_BOARD_LAYERS (LAYERS_6), - - MEMCLK_DIS_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00), - CKE_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08), /* TODO: bit2map, bit3map */ - ODT_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08), - CS_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08, 0x00, 0x00, 0x00, 0x00), - - PSO_END -}; - -/* - * These tables are optional and may be used to adjust memory timing settings - */ -#include "mm.h" -#include "mn.h" diff --git a/src/mainboard/hp/abm/OemCustomize.c b/src/mainboard/hp/abm/OemCustomize.c index 29eca1deeb..730c97e26e 100644 --- a/src/mainboard/hp/abm/OemCustomize.c +++ b/src/mainboard/hp/abm/OemCustomize.c @@ -18,6 +18,7 @@ #include "amdlib.h" #include "Ids.h" #include "heapManager.h" +#include #include "Filecode.h" #include @@ -147,6 +148,36 @@ static AGESA_STATUS OemInitMid(AMD_MID_PARAMS * InitMid) return AGESA_SUCCESS; } +/*---------------------------------------------------------------------------------------- + * CUSTOMER OVERIDES MEMORY TABLE + *---------------------------------------------------------------------------------------- + */ + +/* + * Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA + * (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable + * is populated, AGESA will base its settings on the data from the table. Otherwise, it will + * use its default conservative settings. + */ +CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = { + #define SEED_A 0x12 + HW_RXEN_SEED( + ANY_SOCKET, CHANNEL_A, ALL_DIMMS, + SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, + SEED_A), + + NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, ONE_DIMM), + NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, ONE_DIMM), + MOTHER_BOARD_LAYERS (LAYERS_6), + + MEMCLK_DIS_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00), + CKE_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08), /* TODO: bit2map, bit3map */ + ODT_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08), + CS_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08, 0x00, 0x00, 0x00, 0x00), + + PSO_END +}; + const struct OEM_HOOK OemCustomize = { .InitEarly = OemInitEarly, .InitMid = OemInitMid, diff --git a/src/mainboard/hp/abm/buildOpts.c b/src/mainboard/hp/abm/buildOpts.c index 96d59db3d1..c24dd4d524 100644 --- a/src/mainboard/hp/abm/buildOpts.c +++ b/src/mainboard/hp/abm/buildOpts.c @@ -369,98 +369,3 @@ GPIO_CONTROL hp_abm_gpio[] = { #include "PlatformInstall.h" -/*---------------------------------------------------------------------------------------- - * CUSTOMER OVERIDES MEMORY TABLE - *---------------------------------------------------------------------------------------- - */ - -/* - * Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA - * (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable - * is populated, AGESA will base its settings on the data from the table. Otherwise, it will - * use its default conservative settings. - */ -CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = { - // - // The following macros are supported (use comma to separate macros): - // - // MEMCLK_DIS_MAP(SocketID, ChannelID, MemClkDisBit0CSMap,..., MemClkDisBit7CSMap) - // The MemClk pins are identified based on BKDG definition of Fn2x88[MemClkDis] bitmap. - // AGESA will base on this value to disable unused MemClk to save power. - // Example: - // BKDG definition of Fn2x88[MemClkDis] bitmap for AM3 package is like below: - // Bit AM3/S1g3 pin name - // 0 M[B,A]_CLK_H/L[0] - // 1 M[B,A]_CLK_H/L[1] - // 2 M[B,A]_CLK_H/L[2] - // 3 M[B,A]_CLK_H/L[3] - // 4 M[B,A]_CLK_H/L[4] - // 5 M[B,A]_CLK_H/L[5] - // 6 M[B,A]_CLK_H/L[6] - // 7 M[B,A]_CLK_H/L[7] - // And platform has the following routing: - // CS0 M[B,A]_CLK_H/L[4] - // CS1 M[B,A]_CLK_H/L[2] - // CS2 M[B,A]_CLK_H/L[3] - // CS3 M[B,A]_CLK_H/L[5] - // Then platform can specify the following macro: - // MEMCLK_DIS_MAP(ANY_SOCKET, ANY_CHANNEL, 0x00, 0x00, 0x02, 0x04, 0x01, 0x08, 0x00, 0x00) - // - // CKE_TRI_MAP(SocketID, ChannelID, CKETriBit0CSMap, CKETriBit1CSMap) - // The CKE pins are identified based on BKDG definition of Fn2x9C_0C[CKETri] bitmap. - // AGESA will base on this value to tristate unused CKE to save power. - // - // ODT_TRI_MAP(SocketID, ChannelID, ODTTriBit0CSMap,..., ODTTriBit3CSMap) - // The ODT pins are identified based on BKDG definition of Fn2x9C_0C[ODTTri] bitmap. - // AGESA will base on this value to tristate unused ODT pins to save power. - // - // CS_TRI_MAP(SocketID, ChannelID, CSTriBit0CSMap,..., CSTriBit7CSMap) - // The Chip select pins are identified based on BKDG definition of Fn2x9C_0C[ChipSelTri] bitmap. - // AGESA will base on this value to tristate unused Chip select to save power. - // - // NUMBER_OF_DIMMS_SUPPORTED(SocketID, ChannelID, NumberOfDimmSlotsPerChannel) - // Specifies the number of DIMM slots per channel. - // - // NUMBER_OF_CHIP_SELECTS_SUPPORTED(SocketID, ChannelID, NumberOfChipSelectsPerChannel) - // Specifies the number of Chip selects per channel. - // - // NUMBER_OF_CHANNELS_SUPPORTED(SocketID, NumberOfChannelsPerSocket) - // Specifies the number of channels per socket. - // - // OVERRIDE_DDR_BUS_SPEED(SocketID, ChannelID, USER_MEMORY_TIMING_MODE, MEMORY_BUS_SPEED) - // Specifies DDR bus speed of channel ChannelID on socket SocketID. - // - // DRAM_TECHNOLOGY(SocketID, TECHNOLOGY_TYPE) - // Specifies the DRAM technology type of socket SocketID (DDR2, DDR3,...) - // - // WRITE_LEVELING_SEED(SocketID, ChannelID, DimmID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, - // Byte6Seed, Byte7Seed, ByteEccSeed) - // Specifies the write leveling seed for a channel of a socket. - // - // HW_RXEN_SEED(SocketID, ChannelID, DimmID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, - // Byte6Seed, Byte7Seed, ByteEccSeed) - // Speicifes the HW RXEN training seed for a channel of a socket - // - #define SEED_A 0x12 - HW_RXEN_SEED( - ANY_SOCKET, CHANNEL_A, ALL_DIMMS, - SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, - SEED_A), - - NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, ONE_DIMM), - NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, ONE_DIMM), - MOTHER_BOARD_LAYERS (LAYERS_6), - - MEMCLK_DIS_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00), - CKE_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08), /* TODO: bit2map, bit3map */ - ODT_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08), - CS_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08, 0x00, 0x00, 0x00, 0x00), - - PSO_END -}; - -/* - * These tables are optional and may be used to adjust memory timing settings - */ -#include "mm.h" -#include "mn.h" diff --git a/src/mainboard/hp/pavilion_m6_1035dx/OemCustomize.c b/src/mainboard/hp/pavilion_m6_1035dx/OemCustomize.c index 9ea6c656c9..605c7d3f9c 100644 --- a/src/mainboard/hp/pavilion_m6_1035dx/OemCustomize.c +++ b/src/mainboard/hp/pavilion_m6_1035dx/OemCustomize.c @@ -19,6 +19,7 @@ #include #include +#include #define FILECODE PROC_GNB_PCIE_FAMILY_0X15_F15PCIECOMPLEXCONFIG_FILECODE @@ -197,6 +198,30 @@ static AGESA_STATUS OemInitMid(AMD_MID_PARAMS * InitMid) return AGESA_SUCCESS; } +/*---------------------------------------------------------------------------------------- + * CUSTOMER OVERIDES MEMORY TABLE + *---------------------------------------------------------------------------------------- + */ + +/* + * Platform Specific Overriding Table allows IBV/OEM to pass in platform + * information to AGESA + * (e.g. MemClk routing, the number of DIMM slots per channel,...). + * If PlatformSpecificTable is populated, AGESA will base its settings on the + * data from the table. Otherwise, it will use its default conservative settings + */ +CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = { + + NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 1), + NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 2), + MEMCLK_DIS_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00), + CKE_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x05, 0x0A), + ODT_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x00, 0x00), + CS_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00), + + PSO_END +}; + const struct OEM_HOOK OemCustomize = { .InitEarly = OemInitEarly, .InitMid = OemInitMid, diff --git a/src/mainboard/hp/pavilion_m6_1035dx/buildOpts.c b/src/mainboard/hp/pavilion_m6_1035dx/buildOpts.c index 8d02f03311..f4b61ab502 100644 --- a/src/mainboard/hp/pavilion_m6_1035dx/buildOpts.c +++ b/src/mainboard/hp/pavilion_m6_1035dx/buildOpts.c @@ -402,26 +402,3 @@ SCI_MAP_CONTROL m6_1035dx_sci_map[] = { /* AGESA nonsense: this header depends on the definitions above */ #include -/*---------------------------------------------------------------------------------------- - * CUSTOMER OVERIDES MEMORY TABLE - *---------------------------------------------------------------------------------------- - */ - -/* - * Platform Specific Overriding Table allows IBV/OEM to pass in platform - * information to AGESA - * (e.g. MemClk routing, the number of DIMM slots per channel,...). - * If PlatformSpecificTable is populated, AGESA will base its settings on the - * data from the table. Otherwise, it will use its default conservative settings - */ -CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = { - - NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 1), - NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 2), - MEMCLK_DIS_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00), - CKE_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x05, 0x0A), - ODT_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x00, 0x00), - CS_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00), - - PSO_END -}; diff --git a/src/mainboard/jetway/nf81-t56n-lf/OemCustomize.c b/src/mainboard/jetway/nf81-t56n-lf/OemCustomize.c index a4c6f95a4a..f980a15b08 100644 --- a/src/mainboard/jetway/nf81-t56n-lf/OemCustomize.c +++ b/src/mainboard/jetway/nf81-t56n-lf/OemCustomize.c @@ -19,6 +19,7 @@ #include #include #include +#include #define FILECODE PROC_RECOVERY_MEM_NB_ON_MRNON_FILECODE @@ -178,6 +179,21 @@ PCIe_COMPLEX_DESCRIPTOR Brazos = { return AGESA_SUCCESS; } +/** + * @brief Customer Overides Memory Table + * + * Platform Specific Overriding Table allows IBV/OEM to pass in platform + * information to AGESA + * (e.g. MemClk routing, the number of DIMM slots per channel,...). + * If PlatformSpecificTable is populated, AGESA will base its settings on the + * data from the table. Otherwise, it will use its default conservative settings. + */ +const PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = { + NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 2), + NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 1), + PSO_END +}; + const struct OEM_HOOK OemCustomize = { .InitEarly = OemInitEarly, }; diff --git a/src/mainboard/jetway/nf81-t56n-lf/buildOpts.c b/src/mainboard/jetway/nf81-t56n-lf/buildOpts.c index 73673ef62f..05ea68133b 100644 --- a/src/mainboard/jetway/nf81-t56n-lf/buildOpts.c +++ b/src/mainboard/jetway/nf81-t56n-lf/buildOpts.c @@ -315,17 +315,3 @@ const AP_MTRR_SETTINGS ROMDATA OntarioApMtrrSettingsList[] = /* Instantiate all solution relevant data. */ #include -/** - * @brief Customer Overides Memory Table - * - * Platform Specific Overriding Table allows IBV/OEM to pass in platform - * information to AGESA - * (e.g. MemClk routing, the number of DIMM slots per channel,...). - * If PlatformSpecificTable is populated, AGESA will base its settings on the - * data from the table. Otherwise, it will use its default conservative settings. - */ -const PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = { - NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 2), - NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 1), - PSO_END -}; diff --git a/src/mainboard/lenovo/g505s/OemCustomize.c b/src/mainboard/lenovo/g505s/OemCustomize.c index 9ea6c656c9..605c7d3f9c 100644 --- a/src/mainboard/lenovo/g505s/OemCustomize.c +++ b/src/mainboard/lenovo/g505s/OemCustomize.c @@ -19,6 +19,7 @@ #include #include +#include #define FILECODE PROC_GNB_PCIE_FAMILY_0X15_F15PCIECOMPLEXCONFIG_FILECODE @@ -197,6 +198,30 @@ static AGESA_STATUS OemInitMid(AMD_MID_PARAMS * InitMid) return AGESA_SUCCESS; } +/*---------------------------------------------------------------------------------------- + * CUSTOMER OVERIDES MEMORY TABLE + *---------------------------------------------------------------------------------------- + */ + +/* + * Platform Specific Overriding Table allows IBV/OEM to pass in platform + * information to AGESA + * (e.g. MemClk routing, the number of DIMM slots per channel,...). + * If PlatformSpecificTable is populated, AGESA will base its settings on the + * data from the table. Otherwise, it will use its default conservative settings + */ +CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = { + + NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 1), + NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 2), + MEMCLK_DIS_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00), + CKE_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x05, 0x0A), + ODT_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x00, 0x00), + CS_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00), + + PSO_END +}; + const struct OEM_HOOK OemCustomize = { .InitEarly = OemInitEarly, .InitMid = OemInitMid, diff --git a/src/mainboard/lenovo/g505s/buildOpts.c b/src/mainboard/lenovo/g505s/buildOpts.c index 7b491d41fc..d633d07897 100644 --- a/src/mainboard/lenovo/g505s/buildOpts.c +++ b/src/mainboard/lenovo/g505s/buildOpts.c @@ -402,26 +402,3 @@ SCI_MAP_CONTROL lenovo_g505s_sci_map[] = { /* AGESA nonsense: this header depends on the definitions above */ #include -/*---------------------------------------------------------------------------------------- - * CUSTOMER OVERIDES MEMORY TABLE - *---------------------------------------------------------------------------------------- - */ - -/* - * Platform Specific Overriding Table allows IBV/OEM to pass in platform - * information to AGESA - * (e.g. MemClk routing, the number of DIMM slots per channel,...). - * If PlatformSpecificTable is populated, AGESA will base its settings on the - * data from the table. Otherwise, it will use its default conservative settings - */ -CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = { - - NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 1), - NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 2), - MEMCLK_DIS_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00), - CKE_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x05, 0x0A), - ODT_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x00, 0x00), - CS_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00), - - PSO_END -}; diff --git a/src/mainboard/lippert/frontrunner-af/OemCustomize.c b/src/mainboard/lippert/frontrunner-af/OemCustomize.c index 0332580ae7..63466b9dfb 100644 --- a/src/mainboard/lippert/frontrunner-af/OemCustomize.c +++ b/src/mainboard/lippert/frontrunner-af/OemCustomize.c @@ -17,6 +17,7 @@ #include "amdlib.h" #include "Ids.h" #include "heapManager.h" +#include #include "PlatformGnbPcieComplex.h" #include "Filecode.h" @@ -140,6 +141,24 @@ PCIe_COMPLEX_DESCRIPTOR Brazos = { return AGESA_SUCCESS; } +/*---------------------------------------------------------------------------------------- + * CUSTOMER OVERIDES MEMORY TABLE + *---------------------------------------------------------------------------------------- + */ + +/* + * Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA + * (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable + * is populated, AGESA will base its settings on the data from the table. Otherwise, it will + * use its default conservative settings. + */ +CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = { + HW_RXEN_SEED (ANY_SOCKET, ANY_CHANNEL, 0x3B, 0x3B, 0x3B, 0x3B, 0x3B, 0x3B, 0x3B, 0x3B, 0x3B), + NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 2), + NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 1), + PSO_END +}; + const struct OEM_HOOK OemCustomize = { .InitEarly = OemInitEarly, }; diff --git a/src/mainboard/lippert/frontrunner-af/buildOpts.c b/src/mainboard/lippert/frontrunner-af/buildOpts.c index 3211966586..c17394a8bb 100644 --- a/src/mainboard/lippert/frontrunner-af/buildOpts.c +++ b/src/mainboard/lippert/frontrunner-af/buildOpts.c @@ -311,82 +311,3 @@ CONST AP_MTRR_SETTINGS ROMDATA OntarioApMtrrSettingsList[] = // Instantiate all solution relevant data. #include "PlatformInstall.h" -/*---------------------------------------------------------------------------------------- - * CUSTOMER OVERIDES MEMORY TABLE - *---------------------------------------------------------------------------------------- - */ - -/* - * Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA - * (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable - * is populated, AGESA will base its settings on the data from the table. Otherwise, it will - * use its default conservative settings. - */ -CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = { - // - // The following macros are supported (use comma to separate macros): - // - // MEMCLK_DIS_MAP(SocketID, ChannelID, MemClkDisBit0CSMap,..., MemClkDisBit7CSMap) - // The MemClk pins are identified based on BKDG definition of Fn2x88[MemClkDis] bitmap. - // AGESA will base on this value to disable unused MemClk to save power. - // Example: - // BKDG definition of Fn2x88[MemClkDis] bitmap for AM3 package is like below: - // Bit AM3/S1g3 pin name - // 0 M[B,A]_CLK_H/L[0] - // 1 M[B,A]_CLK_H/L[1] - // 2 M[B,A]_CLK_H/L[2] - // 3 M[B,A]_CLK_H/L[3] - // 4 M[B,A]_CLK_H/L[4] - // 5 M[B,A]_CLK_H/L[5] - // 6 M[B,A]_CLK_H/L[6] - // 7 M[B,A]_CLK_H/L[7] - // And platform has the following routing: - // CS0 M[B,A]_CLK_H/L[4] - // CS1 M[B,A]_CLK_H/L[2] - // CS2 M[B,A]_CLK_H/L[3] - // CS3 M[B,A]_CLK_H/L[5] - // Then platform can specify the following macro: - // MEMCLK_DIS_MAP(ANY_SOCKET, ANY_CHANNEL, 0x00, 0x00, 0x02, 0x04, 0x01, 0x08, 0x00, 0x00) - // - // CKE_TRI_MAP(SocketID, ChannelID, CKETriBit0CSMap, CKETriBit1CSMap) - // The CKE pins are identified based on BKDG definition of Fn2x9C_0C[CKETri] bitmap. - // AGESA will base on this value to tristate unused CKE to save power. - // - // ODT_TRI_MAP(SocketID, ChannelID, ODTTriBit0CSMap,..., ODTTriBit3CSMap) - // The ODT pins are identified based on BKDG definition of Fn2x9C_0C[ODTTri] bitmap. - // AGESA will base on this value to tristate unused ODT pins to save power. - // - // CS_TRI_MAP(SocketID, ChannelID, CSTriBit0CSMap,..., CSTriBit7CSMap) - // The Chip select pins are identified based on BKDG definition of Fn2x9C_0C[ChipSelTri] bitmap. - // AGESA will base on this value to tristate unused Chip select to save power. - // - // NUMBER_OF_DIMMS_SUPPORTED(SocketID, ChannelID, NumberOfDimmSlotsPerChannel) - // Specifies the number of DIMM slots per channel. - // - // NUMBER_OF_CHIP_SELECTS_SUPPORTED(SocketID, ChannelID, NumberOfChipSelectsPerChannel) - // Specifies the number of Chip selects per channel. - // - // NUMBER_OF_CHANNELS_SUPPORTED(SocketID, NumberOfChannelsPerSocket) - // Specifies the number of channels per socket. - // - // OVERRIDE_DDR_BUS_SPEED(SocketID, ChannelID, USER_MEMORY_TIMING_MODE, MEMORY_BUS_SPEED) - // Specifies DDR bus speed of channel ChannelID on socket SocketID. - // - // DRAM_TECHNOLOGY(SocketID, TECHNOLOGY_TYPE) - // Specifies the DRAM technology type of socket SocketID (DDR2, DDR3,...) - // - // WRITE_LEVELING_SEED(SocketID, ChannelID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, - // Byte6Seed, Byte7Seed, ByteEccSeed) - // Specifies the write leveling seed for a channel of a socket. - // - HW_RXEN_SEED (ANY_SOCKET, ANY_CHANNEL, 0x3B, 0x3B, 0x3B, 0x3B, 0x3B, 0x3B, 0x3B, 0x3B, 0x3B), - NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 2), - NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 1), - PSO_END -}; - -/* - * These tables are optional and may be used to adjust memory timing settings - */ -#include "mm.h" -#include "mn.h" diff --git a/src/mainboard/lippert/toucan-af/OemCustomize.c b/src/mainboard/lippert/toucan-af/OemCustomize.c index 93e59a48f4..a5f4921de2 100644 --- a/src/mainboard/lippert/toucan-af/OemCustomize.c +++ b/src/mainboard/lippert/toucan-af/OemCustomize.c @@ -17,6 +17,7 @@ #include "amdlib.h" #include "Ids.h" #include "heapManager.h" +#include #include "PlatformGnbPcieComplex.h" #include "Filecode.h" @@ -140,6 +141,24 @@ PCIe_COMPLEX_DESCRIPTOR Brazos = { return AGESA_SUCCESS; } +/*---------------------------------------------------------------------------------------- + * CUSTOMER OVERIDES MEMORY TABLE + *---------------------------------------------------------------------------------------- + */ + +/* + * Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA + * (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable + * is populated, AGESA will base its settings on the data from the table. Otherwise, it will + * use its default conservative settings. + */ +CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = { + HW_RXEN_SEED (ANY_SOCKET, ANY_CHANNEL, 0x3B, 0x3B, 0x3B, 0x3B, 0x3B, 0x3B, 0x3B, 0x3B, 0x3B), + NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 2), + NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 1), + PSO_END +}; + const struct OEM_HOOK OemCustomize = { .InitEarly = OemInitEarly, }; diff --git a/src/mainboard/lippert/toucan-af/buildOpts.c b/src/mainboard/lippert/toucan-af/buildOpts.c index 3211966586..c17394a8bb 100644 --- a/src/mainboard/lippert/toucan-af/buildOpts.c +++ b/src/mainboard/lippert/toucan-af/buildOpts.c @@ -311,82 +311,3 @@ CONST AP_MTRR_SETTINGS ROMDATA OntarioApMtrrSettingsList[] = // Instantiate all solution relevant data. #include "PlatformInstall.h" -/*---------------------------------------------------------------------------------------- - * CUSTOMER OVERIDES MEMORY TABLE - *---------------------------------------------------------------------------------------- - */ - -/* - * Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA - * (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable - * is populated, AGESA will base its settings on the data from the table. Otherwise, it will - * use its default conservative settings. - */ -CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = { - // - // The following macros are supported (use comma to separate macros): - // - // MEMCLK_DIS_MAP(SocketID, ChannelID, MemClkDisBit0CSMap,..., MemClkDisBit7CSMap) - // The MemClk pins are identified based on BKDG definition of Fn2x88[MemClkDis] bitmap. - // AGESA will base on this value to disable unused MemClk to save power. - // Example: - // BKDG definition of Fn2x88[MemClkDis] bitmap for AM3 package is like below: - // Bit AM3/S1g3 pin name - // 0 M[B,A]_CLK_H/L[0] - // 1 M[B,A]_CLK_H/L[1] - // 2 M[B,A]_CLK_H/L[2] - // 3 M[B,A]_CLK_H/L[3] - // 4 M[B,A]_CLK_H/L[4] - // 5 M[B,A]_CLK_H/L[5] - // 6 M[B,A]_CLK_H/L[6] - // 7 M[B,A]_CLK_H/L[7] - // And platform has the following routing: - // CS0 M[B,A]_CLK_H/L[4] - // CS1 M[B,A]_CLK_H/L[2] - // CS2 M[B,A]_CLK_H/L[3] - // CS3 M[B,A]_CLK_H/L[5] - // Then platform can specify the following macro: - // MEMCLK_DIS_MAP(ANY_SOCKET, ANY_CHANNEL, 0x00, 0x00, 0x02, 0x04, 0x01, 0x08, 0x00, 0x00) - // - // CKE_TRI_MAP(SocketID, ChannelID, CKETriBit0CSMap, CKETriBit1CSMap) - // The CKE pins are identified based on BKDG definition of Fn2x9C_0C[CKETri] bitmap. - // AGESA will base on this value to tristate unused CKE to save power. - // - // ODT_TRI_MAP(SocketID, ChannelID, ODTTriBit0CSMap,..., ODTTriBit3CSMap) - // The ODT pins are identified based on BKDG definition of Fn2x9C_0C[ODTTri] bitmap. - // AGESA will base on this value to tristate unused ODT pins to save power. - // - // CS_TRI_MAP(SocketID, ChannelID, CSTriBit0CSMap,..., CSTriBit7CSMap) - // The Chip select pins are identified based on BKDG definition of Fn2x9C_0C[ChipSelTri] bitmap. - // AGESA will base on this value to tristate unused Chip select to save power. - // - // NUMBER_OF_DIMMS_SUPPORTED(SocketID, ChannelID, NumberOfDimmSlotsPerChannel) - // Specifies the number of DIMM slots per channel. - // - // NUMBER_OF_CHIP_SELECTS_SUPPORTED(SocketID, ChannelID, NumberOfChipSelectsPerChannel) - // Specifies the number of Chip selects per channel. - // - // NUMBER_OF_CHANNELS_SUPPORTED(SocketID, NumberOfChannelsPerSocket) - // Specifies the number of channels per socket. - // - // OVERRIDE_DDR_BUS_SPEED(SocketID, ChannelID, USER_MEMORY_TIMING_MODE, MEMORY_BUS_SPEED) - // Specifies DDR bus speed of channel ChannelID on socket SocketID. - // - // DRAM_TECHNOLOGY(SocketID, TECHNOLOGY_TYPE) - // Specifies the DRAM technology type of socket SocketID (DDR2, DDR3,...) - // - // WRITE_LEVELING_SEED(SocketID, ChannelID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, - // Byte6Seed, Byte7Seed, ByteEccSeed) - // Specifies the write leveling seed for a channel of a socket. - // - HW_RXEN_SEED (ANY_SOCKET, ANY_CHANNEL, 0x3B, 0x3B, 0x3B, 0x3B, 0x3B, 0x3B, 0x3B, 0x3B, 0x3B), - NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 2), - NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 1), - PSO_END -}; - -/* - * These tables are optional and may be used to adjust memory timing settings - */ -#include "mm.h" -#include "mn.h" diff --git a/src/mainboard/pcengines/apu1/OemCustomize.c b/src/mainboard/pcengines/apu1/OemCustomize.c index d3dd403cb5..20acb272ac 100644 --- a/src/mainboard/pcengines/apu1/OemCustomize.c +++ b/src/mainboard/pcengines/apu1/OemCustomize.c @@ -19,6 +19,7 @@ #include #include #include +#include /** * OemCustomizeInitEarly @@ -126,6 +127,34 @@ PCIe_COMPLEX_DESCRIPTOR Brazos = { return AGESA_SUCCESS; } +/*---------------------------------------------------------------------------------------- + * CUSTOMER OVERIDES MEMORY TABLE + *---------------------------------------------------------------------------------------- + */ + +/* + * Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA + * (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable + * is populated, AGESA will base its settings on the data from the table. Otherwise, it will + * use its default conservative settings. + */ +CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = { + + NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, TWO_DIMM), + NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, ONE_DIMM), + + // APU soldered down memory uses memory CLK0 and CLK1 on CS0 + MEMCLK_DIS_MAP(ANY_SOCKET, ANY_CHANNEL, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00), + + // APU soldered down memory requires different seeds +#define WLSEED 0x08 +#define RXSEED 0x40 + WRITE_LEVELING_SEED(ANY_SOCKET, ANY_CHANNEL, WLSEED, WLSEED, WLSEED, WLSEED, WLSEED, WLSEED, WLSEED, WLSEED, WLSEED), + HW_RXEN_SEED( ANY_SOCKET, ANY_CHANNEL, RXSEED, RXSEED, RXSEED, RXSEED, RXSEED, RXSEED, RXSEED, RXSEED, RXSEED), + + PSO_END +}; + const struct OEM_HOOK OemCustomize = { .InitEarly = OemInitEarly, }; diff --git a/src/mainboard/pcengines/apu1/buildOpts.c b/src/mainboard/pcengines/apu1/buildOpts.c index 50cf4cfa86..edfdd301a1 100644 --- a/src/mainboard/pcengines/apu1/buildOpts.c +++ b/src/mainboard/pcengines/apu1/buildOpts.c @@ -309,93 +309,3 @@ CONST AP_MTRR_SETTINGS ROMDATA OntarioApMtrrSettingsList[] = // Instantiate all solution relevant data. #include "PlatformInstall.h" - -/*---------------------------------------------------------------------------------------- - * CUSTOMER OVERIDES MEMORY TABLE - *---------------------------------------------------------------------------------------- - */ - -/* - * Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA - * (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable - * is populated, AGESA will base its settings on the data from the table. Otherwise, it will - * use its default conservative settings. - */ -CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = { - // - // The following macros are supported (use comma to separate macros): - // - // MEMCLK_DIS_MAP(SocketID, ChannelID, MemClkDisBit0CSMap,..., MemClkDisBit7CSMap) - // The MemClk pins are identified based on BKDG definition of Fn2x88[MemClkDis] bitmap. - // AGESA will base on this value to disable unused MemClk to save power. - // Example: - // BKDG definition of Fn2x88[MemClkDis] bitmap for AM3 package is like below: - // Bit AM3/S1g3 pin name - // 0 M[B,A]_CLK_H/L[0] - // 1 M[B,A]_CLK_H/L[1] - // 2 M[B,A]_CLK_H/L[2] - // 3 M[B,A]_CLK_H/L[3] - // 4 M[B,A]_CLK_H/L[4] - // 5 M[B,A]_CLK_H/L[5] - // 6 M[B,A]_CLK_H/L[6] - // 7 M[B,A]_CLK_H/L[7] - // And platform has the following routing: - // CS0 M[B,A]_CLK_H/L[4] - // CS1 M[B,A]_CLK_H/L[2] - // CS2 M[B,A]_CLK_H/L[3] - // CS3 M[B,A]_CLK_H/L[5] - // Then platform can specify the following macro: - // MEMCLK_DIS_MAP(ANY_SOCKET, ANY_CHANNEL, 0x00, 0x00, 0x02, 0x04, 0x01, 0x08, 0x00, 0x00) - // - // CKE_TRI_MAP(SocketID, ChannelID, CKETriBit0CSMap, CKETriBit1CSMap) - // The CKE pins are identified based on BKDG definition of Fn2x9C_0C[CKETri] bitmap. - // AGESA will base on this value to tristate unused CKE to save power. - // - // ODT_TRI_MAP(SocketID, ChannelID, ODTTriBit0CSMap,..., ODTTriBit3CSMap) - // The ODT pins are identified based on BKDG definition of Fn2x9C_0C[ODTTri] bitmap. - // AGESA will base on this value to tristate unused ODT pins to save power. - // - // CS_TRI_MAP(SocketID, ChannelID, CSTriBit0CSMap,..., CSTriBit7CSMap) - // The Chip select pins are identified based on BKDG definition of Fn2x9C_0C[ChipSelTri] bitmap. - // AGESA will base on this value to tristate unused Chip select to save power. - // - // NUMBER_OF_DIMMS_SUPPORTED(SocketID, ChannelID, NumberOfDimmSlotsPerChannel) - // Specifies the number of DIMM slots per channel. - // - // NUMBER_OF_CHIP_SELECTS_SUPPORTED(SocketID, ChannelID, NumberOfChipSelectsPerChannel) - // Specifies the number of Chip selects per channel. - // - // NUMBER_OF_CHANNELS_SUPPORTED(SocketID, NumberOfChannelsPerSocket) - // Specifies the number of channels per socket. - // - // OVERRIDE_DDR_BUS_SPEED(SocketID, ChannelID, USER_MEMORY_TIMING_MODE, MEMORY_BUS_SPEED) - // Specifies DDR bus speed of channel ChannelID on socket SocketID. - // - // DRAM_TECHNOLOGY(SocketID, TECHNOLOGY_TYPE) - // Specifies the DRAM technology type of socket SocketID (DDR2, DDR3,...) - // - // WRITE_LEVELING_SEED(SocketID, ChannelID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, - // Byte6Seed, Byte7Seed, ByteEccSeed) - // Specifies the write leveling seed for a channel of a socket. - // - - NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, TWO_DIMM), - NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, ONE_DIMM), - - // APU soldered down memory uses memory CLK0 and CLK1 on CS0 - MEMCLK_DIS_MAP(ANY_SOCKET, ANY_CHANNEL, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00), - - // APU soldered down memory requires different seeds -#define WLSEED 0x08 -#define RXSEED 0x40 - WRITE_LEVELING_SEED(ANY_SOCKET, ANY_CHANNEL, WLSEED, WLSEED, WLSEED, WLSEED, WLSEED, WLSEED, WLSEED, WLSEED, WLSEED), - HW_RXEN_SEED( ANY_SOCKET, ANY_CHANNEL, RXSEED, RXSEED, RXSEED, RXSEED, RXSEED, RXSEED, RXSEED, RXSEED, RXSEED), - - PSO_END -}; - -/* - * These tables are optional and may be used to adjust memory timing settings - */ -#include "mm.h" -#include "mn.h" diff --git a/src/vendorcode/amd/agesa/f14/Include/PlatformInstall.h b/src/vendorcode/amd/agesa/f14/Include/PlatformInstall.h index 8641589f96..085abc6282 100644 --- a/src/vendorcode/amd/agesa/f14/Include/PlatformInstall.h +++ b/src/vendorcode/amd/agesa/f14/Include/PlatformInstall.h @@ -2160,7 +2160,6 @@ CONST UINT32 ROMDATA AmdPlatformTypeCgf = CFG_AMD_PLATFORM_TYPE; #include "OptionsHt.h" #include "OptionHtInstall.h" #include "OptionMemory.h" -#include "PlatformMemoryConfiguration.h" #include "OptionMemoryInstall.h" #include "OptionMemoryRecovery.h" #include "OptionMemoryRecoveryInstall.h" diff --git a/src/vendorcode/amd/agesa/f15tn/Include/PlatformInstall.h b/src/vendorcode/amd/agesa/f15tn/Include/PlatformInstall.h index eca567b3ff..cbf7ac6ade 100644 --- a/src/vendorcode/amd/agesa/f15tn/Include/PlatformInstall.h +++ b/src/vendorcode/amd/agesa/f15tn/Include/PlatformInstall.h @@ -2623,7 +2623,6 @@ CONST UINT32 ROMDATA AmdPlatformTypeCgf = CFG_AMD_PLATFORM_TYPE; #include "OptionsHt.h" #include "OptionHtInstall.h" #include "OptionMemory.h" -#include "PlatformMemoryConfiguration.h" #include "OptionMemoryInstall.h" #include "OptionMemoryRecovery.h" #include "OptionMemoryRecoveryInstall.h" diff --git a/src/vendorcode/amd/agesa/f16kb/Include/PlatformInstall.h b/src/vendorcode/amd/agesa/f16kb/Include/PlatformInstall.h index 1295888f99..e989537df6 100644 --- a/src/vendorcode/amd/agesa/f16kb/Include/PlatformInstall.h +++ b/src/vendorcode/amd/agesa/f16kb/Include/PlatformInstall.h @@ -1732,7 +1732,6 @@ CONST UINT32 ROMDATA AmdPlatformTypeCgf = CFG_AMD_PLATFORM_TYPE; #include "OptionsHt.h" #include "OptionHtInstall.h" #include "OptionMemory.h" -#include "PlatformMemoryConfiguration.h" #include "OptionMemoryInstall.h" #include "OptionMemoryRecovery.h" #include "OptionMemoryRecoveryInstall.h"