diff --git a/src/mainboard/iei/juki-511p/Config.lb b/src/mainboard/iei/juki-511p/Config.lb
new file mode 100644
index 0000000000..53b1982fd1
--- /dev/null
+++ b/src/mainboard/iei/juki-511p/Config.lb
@@ -0,0 +1,167 @@
+##
+## Compute the location and size of where this firmware image
+## (linuxBIOS plus bootloader) will live in the boot rom chip.
+##
+default ROM_SIZE = 256 * 1024 
+default ROM_SECTION_SIZE   = ROM_SIZE
+default ROM_SECTION_OFFSET = 0
+
+##
+## Compute the start location and size size of
+## The linuxBIOS bootloader.
+##
+default PAYLOAD_SIZE            = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE )
+default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
+
+##
+## Compute where this copy of linuxBIOS will start in the boot rom
+##
+default _ROMBASE      = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE )
+
+##
+## Compute a range of ROM that can cached to speed up linuxBIOS,
+## execution speed.
+##
+## XIP_ROM_SIZE must be a power of 2.
+## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE
+##
+default XIP_ROM_SIZE=65536
+default XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE )
+
+##
+## Set all of the defaults for an x86 architecture
+##
+
+arch i386 end
+
+##
+## Build the objects we have code for in this directory.
+##
+
+driver mainboard.o
+
+if HAVE_PIRQ_TABLE object irq_tables.o end
+#object reset.o
+
+##
+## Romcc output
+##
+makerule ./failover.E
+	depends "$(MAINBOARD)/failover.c ./romcc" 
+	action "./romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
+end
+
+makerule ./failover.inc
+	depends "$(MAINBOARD)/failover.c ./romcc"
+	action "./romcc    -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
+end
+
+makerule ./auto.E 
+	depends	"$(MAINBOARD)/auto.c option_table.h ./romcc" 
+	action	"./romcc -E -mcpu=i386 -O -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
+end
+makerule ./auto.inc 
+	depends "$(MAINBOARD)/auto.c option_table.h ./romcc"
+	action	"./romcc    -mcpu=i386 -O -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
+end
+
+##
+## Build our 16 bit and 32 bit linuxBIOS entry code
+##
+mainboardinit cpu/x86/16bit/entry16.inc
+mainboardinit cpu/x86/32bit/entry32.inc
+ldscript /cpu/x86/16bit/entry16.lds
+ldscript /cpu/x86/32bit/entry32.lds
+
+##
+## Build our reset vector (This is where linuxBIOS is entered)
+##
+mainboardinit cpu/x86/16bit/reset16.inc 
+ldscript /cpu/x86/16bit/reset16.lds 
+
+### Should this be in the northbridge code?
+mainboardinit arch/i386/lib/cpu_reset.inc
+
+##
+## Include an id string (For safe flashing)
+##
+mainboardinit arch/i386/lib/id.inc
+ldscript /arch/i386/lib/id.lds
+
+###
+### O.k. We aren't just an intermediary anymore!
+###
+
+##
+## Setup RAM
+##
+mainboardinit cpu/x86/fpu/enable_fpu.inc
+mainboardinit cpu/amd/model_gx1/cpu_setup.inc
+mainboardinit cpu/amd/model_gx1/gx_setup.inc
+mainboardinit ./auto.inc
+
+##
+## Include the secondary Configuration files 
+##
+#dir /pc80
+#config chip.h
+
+chip northbridge/amd/gx1
+  device pci_domain 0 on
+    device pci 0.0 on end
+      chip southbridge/amd/cs5530
+
+        device pci 12.0 on
+          chip superio/winbond/w83977f
+            device pnp 3f0.0 on		# FDC
+              irq 0x70 = 6
+            end
+            device pnp 3f0.1 on		# Parallel port
+              io 0x60 = 0x378
+              irq 0x70 = 7
+            end
+            device pnp 3f0.2 on		# COM1
+              io 0x60 = 0x3f8
+              irq 0x70 = 4
+            end
+            register "com1" = "{115200}"
+            device pnp 3f0.3 on		# COM2
+              io 0x60 = 0x2f8
+              irq 0x70 = 3
+            end
+            register "com2" = "{115200}"
+            device pnp 3f0.4 on		# RTC
+              io 0x60 = 0x070
+              irq 0x70 = 8
+            end
+            device pnp 3f0.5 on		# Keyboard
+              io 0x60 = 0x60
+              io 0x62 = 0x64
+              irq 0x70 = 1		# Int  1 for PS/2 keyboard
+              irq 0x72 = 12		# Int 12 for PS/2 mouse
+            end
+            device pnp 3f0.6 off	# IR
+            end
+            device pnp 3f0.7 off	# GPIO1
+            end
+            device pnp 3f0.8 off	# GPIO
+            end
+          end
+        device pci 12.1 on end		# SMI
+        device pci 12.2 on end		# IDE
+        device pci 12.3 on end		# Audio
+        device pci 12.4 on end		# VGA onboard
+
+      end
+
+      device pci 0e.0 on end		# ETH0
+      device pci 13.0 on end		# USB
+
+    end
+  end
+
+  chip cpu/amd/model_gx1
+  end
+
+end
+
diff --git a/src/mainboard/iei/juki-511p/Options.lb b/src/mainboard/iei/juki-511p/Options.lb
new file mode 100644
index 0000000000..45a8436b32
--- /dev/null
+++ b/src/mainboard/iei/juki-511p/Options.lb
@@ -0,0 +1,147 @@
+uses HAVE_MP_TABLE
+uses HAVE_PIRQ_TABLE
+uses USE_FALLBACK_IMAGE
+uses HAVE_FALLBACK_BOOT
+uses HAVE_HARD_RESET
+uses CONFIG_UDELAY_IO
+uses HAVE_OPTION_TABLE
+uses USE_OPTION_TABLE
+uses CONFIG_COMPRESS
+uses CONFIG_COMPRESSED_PAYLOAD_NRV2B
+uses CONFIG_COMPRESSED_PAYLOAD_LZMA
+uses CONFIG_PRECOMPRESSED_PAYLOAD
+uses CONFIG_ROM_PAYLOAD
+uses IRQ_SLOT_COUNT
+uses MAINBOARD
+uses MAINBOARD_VENDOR
+uses MAINBOARD_PART_NUMBER
+uses LINUXBIOS_EXTRA_VERSION
+uses ARCH
+uses FALLBACK_SIZE
+uses STACK_SIZE
+uses HEAP_SIZE
+uses ROM_SIZE
+uses ROM_SECTION_SIZE
+uses ROM_IMAGE_SIZE
+uses ROM_SECTION_SIZE
+uses ROM_SECTION_OFFSET
+uses CONFIG_ROM_PAYLOAD_START
+uses PAYLOAD_SIZE
+uses _ROMBASE
+uses _RAMBASE
+uses XIP_ROM_SIZE
+uses XIP_ROM_BASE
+uses HAVE_MP_TABLE
+uses CROSS_COMPILE
+uses CC
+uses HOSTCC
+
+uses OBJCOPY
+
+uses CONFIG_CONSOLE_SERIAL8250
+uses DEFAULT_CONSOLE_LOGLEVEL
+uses MAXIMUM_CONSOLE_LOGLEVEL
+
+uses TTYS0_BAUD
+uses TTYS0_BASE
+uses TTYS0_LCS
+
+
+## ROM_SIZE is the size of boot ROM that this board will use.
+default ROM_SIZE  = 256*1024
+
+###
+### Build options
+###
+
+##
+## Build code for the fallback boot
+##
+default HAVE_FALLBACK_BOOT=1
+
+##
+## no MP table
+##
+default HAVE_MP_TABLE=0
+
+##
+## Build code to reset the motherboard from linuxBIOS
+##
+default HAVE_HARD_RESET=0
+
+default CONFIG_UDELAY_IO=1
+##
+## Build code to export a programmable irq routing table
+##
+default HAVE_PIRQ_TABLE=0
+default IRQ_SLOT_COUNT=2
+#object irq_tables.o
+
+##
+## Build code to export a CMOS option table
+##
+default HAVE_OPTION_TABLE=0
+
+###
+### LinuxBIOS layout values
+###
+
+## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy.
+default ROM_IMAGE_SIZE = 65536
+default FALLBACK_SIZE = 131072
+
+##
+## Use a small 8K stack
+##
+default STACK_SIZE=0x2000
+
+##
+## Use a small 16K heap
+##
+default HEAP_SIZE=0x4000
+
+##
+## Only use the option table in a normal image
+##
+#default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE
+default USE_OPTION_TABLE = 0
+
+default _RAMBASE = 0x00004000
+
+default CONFIG_ROM_PAYLOAD     = 1
+
+##
+## The Serial Console
+##
+
+# To Enable the Serial Console
+default CONFIG_CONSOLE_SERIAL8250=1
+default DEFAULT_CONSOLE_LOGLEVEL=8
+default MAXIMUM_CONSOLE_LOGLEVEL=8
+
+## Select the serial console baud rate
+default TTYS0_BAUD=115200
+#default TTYS0_BAUD=57600
+#default TTYS0_BAUD=38400
+#default TTYS0_BAUD=19200
+#default TTYS0_BAUD=9600
+#default TTYS0_BAUD=4800
+#default TTYS0_BAUD=2400
+#default TTYS0_BAUD=1200
+
+# Select the serial console base port
+default TTYS0_BASE=0x3f8
+
+# Select the serial protocol
+# This defaults to 8 data bits, 1 stop bit, and no parity
+default TTYS0_LCS=0x3
+
+##
+## The default compiler
+##
+default CROSS_COMPILE=""
+default CC="$(CROSS_COMPILE)gcc -m32"
+default HOSTCC="gcc"
+
+end
+
diff --git a/src/mainboard/iei/juki-511p/auto.c b/src/mainboard/iei/juki-511p/auto.c
new file mode 100644
index 0000000000..7a628ea9b1
--- /dev/null
+++ b/src/mainboard/iei/juki-511p/auto.c
@@ -0,0 +1,59 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2007 Nikolay Petukhov <nikolay.petukhov@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#define ASSEMBLY 1
+
+#include <stdint.h>
+#include <device/pci_def.h>
+#include <arch/io.h>
+#include <device/pnp_def.h>
+#include <arch/romcc_io.h>
+#include <arch/hlt.h>
+#include "pc80/serial.c"
+#include "arch/i386/lib/console.c"
+#include "ram/ramtest.c"
+#include "superio/winbond/w83977f/w83977f_early_serial.c"
+#include "cpu/x86/bist.h"
+#include "pc80/udelay_io.c"
+
+#define SERIAL_DEV PNP_DEV(0x3f0, W83977F_SP1)
+
+#include "northbridge/amd/gx1/raminit.c"
+
+static void main(unsigned long bist)
+{
+	/* Initialize the serial console. */
+	w83977f_enable_serial(SERIAL_DEV, TTYS0_BASE);
+	uart_init();
+	console_init();
+
+	/* Halt if there was a built in self test failure. */
+	report_bist_failure(bist);
+
+	/* Disable Watchdog Timer. */
+	inb(0x043);
+	inb(0x843);
+
+	/* Initialize RAM. */
+	sdram_init();
+
+	/* Check RAM. */
+	/* ram_check(0x00000000, 640 * 1024); */
+}
diff --git a/src/mainboard/iei/juki-511p/chip.h b/src/mainboard/iei/juki-511p/chip.h
new file mode 100644
index 0000000000..49a3f9e0e9
--- /dev/null
+++ b/src/mainboard/iei/juki-511p/chip.h
@@ -0,0 +1,25 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2007 Nikolay Petukhov <nikolay.petukhov@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+extern struct chip_operations mainboard_iei_juki_511p_ops;
+
+struct mainboard_iei_juki_511p_config {
+	int nothing;
+};
diff --git a/src/mainboard/iei/juki-511p/cmos.layout b/src/mainboard/iei/juki-511p/cmos.layout
new file mode 100644
index 0000000000..276ae66a01
--- /dev/null
+++ b/src/mainboard/iei/juki-511p/cmos.layout
@@ -0,0 +1,73 @@
+entries
+
+#start-bit length  config config-ID    name
+#0            8       r       0        seconds
+#8            8       r       0        alarm_seconds
+#16           8       r       0        minutes
+#24           8       r       0        alarm_minutes
+#32           8       r       0        hours
+#40           8       r       0        alarm_hours
+#48           8       r       0        day_of_week
+#56           8       r       0        day_of_month
+#64           8       r       0        month
+#72           8       r       0        year
+#80           4       r       0        rate_select
+#84           3       r       0        REF_Clock
+#87           1       r       0        UIP
+#88           1       r       0        auto_switch_DST
+#89           1       r       0        24_hour_mode
+#90           1       r       0        binary_values_enable
+#91           1       r       0        square-wave_out_enable
+#92           1       r       0        update_finished_enable
+#93           1       r       0        alarm_interrupt_enable
+#94           1       r       0        periodic_interrupt_enable
+#95           1       r       0        disable_clock_updates
+#96         288       r       0        temporary_filler
+0          384       r       0        reserved_memory
+384          1       e       4        boot_option
+385          1       e       4        last_boot
+386          1       e       1        ECC_memory
+388          4       r       0        reboot_bits
+392          3       e       5        baud_rate
+400          1       e       1        power_on_after_fail
+412          4       e       6        debug_level
+416          4       e       7        boot_first
+420          4       e       7        boot_second
+424          4       e       7        boot_third
+428          4       h       0        boot_index
+432	     8       h       0        boot_countdown
+1008         16      h       0        check_sum
+
+enumerations
+
+#ID value   text
+1     0     Disable
+1     1     Enable
+2     0     Enable
+2     1     Disable
+4     0     Fallback
+4     1     Normal
+5     0     115200
+5     1     57600
+5     2     38400
+5     3     19200
+5     4     9600
+5     5     4800
+5     6     2400
+5     7     1200
+6     6     Notice
+6     7     Info
+6     8     Debug
+6     9     Spew
+7     0     Network
+7     1     HDD
+7     2     Floppy
+7     8     Fallback_Network
+7     9     Fallback_HDD
+7     10    Fallback_Floppy
+#7     3     ROM
+
+checksums
+
+checksum 392 1007 1008
+
diff --git a/src/mainboard/iei/juki-511p/failover.c b/src/mainboard/iei/juki-511p/failover.c
new file mode 100644
index 0000000000..9689f67400
--- /dev/null
+++ b/src/mainboard/iei/juki-511p/failover.c
@@ -0,0 +1,53 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2007 Nikolay Petukhov <nikolay.petukhov@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#define ASSEMBLY 1
+
+#include <stdint.h>
+#include <device/pci_def.h>
+#include <device/pci_ids.h>
+#include <arch/io.h>
+#include "arch/romcc_io.h"
+#include "pc80/mc146818rtc_early.c"
+
+static unsigned long main(unsigned long bist)
+{
+	/* This is the primary cpu how should I boot? */
+	if (do_normal_boot()) {
+		goto normal_image;
+	}
+	else {
+		goto fallback_image;
+	}
+normal_image:
+	asm volatile ("jmp __normal_image"
+		: /* outputs */
+		: "a" (bist) /* inputs */
+		: /* clobbers */
+		);
+cpu_reset:
+	asm volatile ("jmp __cpu_reset"
+		: /* outputs */
+		: "a"(bist) /* inputs */
+		: /* clobbers */
+		);
+fallback_image:
+	return bist;
+}
diff --git a/src/mainboard/iei/juki-511p/irq_tables.c b/src/mainboard/iei/juki-511p/irq_tables.c
new file mode 100644
index 0000000000..1a1e373e02
--- /dev/null
+++ b/src/mainboard/iei/juki-511p/irq_tables.c
@@ -0,0 +1,103 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2007 Nikolay Petukhov <nikolay.petukhov@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include <arch/pirq_routing.h>
+
+#define IRQ_BITMAP_LINK0 0x0800		/* chipset's INTA# input should be routed to IRQ11 */
+#define IRQ_BITMAP_LINK1 0x0400		/* chipset's INTB# input should be routed to IRQ10 */
+#define IRQ_BITMAP_LINK2 0x0000		/* chipset's INTC# input should be routed to nothing (disabled) */
+#define IRQ_BITMAP_LINK3 0x0000		/* chipset's INTD# input should be routed to nothing (disabled) */
+
+const struct irq_routing_table intel_irq_routing_table = {
+	PIRQ_SIGNATURE,	 /* u32 signature */
+	PIRQ_VERSION,	 /* u16 version */
+	32+16*2,	 /* There can be a total of 2 devices on the bus */
+	0x00,		 /* Where the interrupt router lies (bus) */
+	(0x12<<3)|0x0,	 /* Where the interrupt router lies (dev) */
+	0xc00,		 /* IRQs devoted exclusively to PCI usage */
+	0x1078,		 /* Vendor */
+	0x2,		 /* Device */
+	0,		 /* Crap (miniport) */
+	{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */
+	0x57,		 /* u8 checksum. This has to be set to some
+			    value that would give 0 after the sum of all
+			    bytes for this structure (including checksum) */
+
+	.slots = {
+		[0] = {
+			.slot = 0x0,	/* should be 0 when it is no real slot. My device is soldered */
+			.bus = 0x00,
+			.devfn = (0x13<<3)|0x0,	/* 0x13 is my USB OHCI */
+			.irq = {
+				[0] = {	/* <-- 0 means this is INTA# output from the device or slot */
+					.link = 0x01,			/* 0x01 means its connected to INTA# input at chipset */
+					.bitmap = IRQ_BITMAP_LINK0
+				},
+				[1] = {	/* <-- 1 means this is INTB# output from the device or slot */
+					.link = 0x02,			/* 0x02 means its connected to INTB# input at chipset */
+					.bitmap = IRQ_BITMAP_LINK1
+				},
+				[2] = {	/* <-- 2 means this is INTC# output from the device or slot */
+					.link = 0x03,			/* 0x03 means its connected to INTC# input at chipset */
+					.bitmap = IRQ_BITMAP_LINK2
+				},
+				[3] = {	/* <-- 3 means this is INTD# output from the device or slot */
+					.link = 0x04,			/* 0x04 means its connected to INTD# input at chipset */
+					.bitmap = IRQ_BITMAP_LINK3
+				}
+			}
+		},
+
+		[1] = {
+			.slot = 0x0,	/* means also "on board" */
+			.bus = 0x00,
+			.devfn = (0x0e<<3)|0x0,	/* 0x0e is my Realtek Network device */
+			.irq = {
+				[0] = {	/* <-- 0 means this is INTA# output from the device or slot */
+					.link = 0x02,			/* 0x02 means its connected to INTB# input at chipset */
+					.bitmap = IRQ_BITMAP_LINK1
+				},
+				[1] = {	/* <-- 1 means this is INTB# output from the device or slot */
+					.link = 0x03,			/* 0x03 means its connected to INTC# input at chipset */
+					.bitmap = IRQ_BITMAP_LINK2
+				},
+				[2] = {	/* <-- 2 means this is INTC# output from the device or slot */
+					.link = 0x04,			/* 0x04 means its connected to INTD# input at chipset */
+					.bitmap = IRQ_BITMAP_LINK3
+				},
+				[3] = {	/* <-- 3 means this is INTD# output from the device or slot */
+					.link = 0x01,			/* 0x01 means its connected to INTA# input at chipset */
+					.bitmap = IRQ_BITMAP_LINK0
+				}
+			}
+		}
+	}
+};
+
+/**
+ * Copy the IRQ routing table to memory.
+ *
+ * @param addr Destination address (between 0xF0000...0x100000).
+ * @return The end address of the pirq routing table in memory.
+ */
+unsigned long write_pirq_routing_table(unsigned long addr)
+{
+	return copy_pirq_routing_table(addr);
+}
diff --git a/src/mainboard/iei/juki-511p/mainboard.c b/src/mainboard/iei/juki-511p/mainboard.c
new file mode 100644
index 0000000000..773dd47ebf
--- /dev/null
+++ b/src/mainboard/iei/juki-511p/mainboard.c
@@ -0,0 +1,31 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2007 Nikolay Petukhov <nikolay.petukhov@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include <arch/io.h>
+#include "chip.h"
+
+struct chip_operations mainboard_iei_juki_511p_ops = {
+	CHIP_NAME("IEI JUKI-511P Mainboard")
+};
diff --git a/targets/iei/juki-511p/Config.lb b/targets/iei/juki-511p/Config.lb
new file mode 100644
index 0000000000..751aa2c2f8
--- /dev/null
+++ b/targets/iei/juki-511p/Config.lb
@@ -0,0 +1,37 @@
+##
+## This file is part of the LinuxBIOS project.
+##
+## Copyright (C) 2007 Nikolay Petukhov <nikolay.petukhov@gmail.com>
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 2 of the License, or
+## (at your option) any later version.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+##
+
+target juki-511p
+mainboard iei/juki-511p
+
+option ROM_SIZE=256*1024
+
+option HAVE_PIRQ_TABLE=1
+
+option CONFIG_COMPRESS=0
+option CONFIG_PRECOMPRESSED_PAYLOAD=0
+
+romimage "image"
+	option ROM_IMAGE_SIZE=64*1024
+	option LINUXBIOS_EXTRA_VERSION="-filo"
+	payload ../../filo.elf
+end
+
+buildrom ./linuxbios.rom ROM_SIZE "image"