Fix the the build of r5494 on Asus A8V-E SE. The K8M890 and K8T890

were not treated separately until now. Fix it. Hope self ack is OK,
compiled tested locally.

Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Acked-by: Rudolf Marek <r.marek@assembler.cz>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5497 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This commit is contained in:
Rudolf Marek 2010-04-25 20:24:09 +00:00
parent bcb8c97af9
commit 53b0b50dc8
5 changed files with 11 additions and 8 deletions

View File

@ -83,4 +83,3 @@ config MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
hex
default 0x1043
depends on BOARD_ASUS_A8V_E_SE

View File

@ -25,7 +25,7 @@ config BOARD_ASUS_M2V_MX_SE
select NORTHBRIDGE_AMD_AMDK8
select NORTHBRIDGE_AMD_AMDK8_ROOT_COMPLEX
select SOUTHBRIDGE_VIA_VT8237R
select SOUTHBRIDGE_VIA_K8T890
select SOUTHBRIDGE_VIA_K8M890
select SUPERIO_ITE_IT8712F
select USE_PRINTK_IN_CAR
select USE_DCACHE_RAM

View File

@ -1,4 +1,5 @@
subdirs-$(CONFIG_SOUTHBRIDGE_VIA_K8T890) += k8t890
subdirs-$(CONFIG_SOUTHBRIDGE_VIA_K8M890) += k8t890
subdirs-$(CONFIG_SOUTHBRIDGE_VIA_VT8231) += vt8231
subdirs-$(CONFIG_SOUTHBRIDGE_VIA_VT8235) += vt8235
subdirs-$(CONFIG_SOUTHBRIDGE_VIA_VT8237R) += vt8237r

View File

@ -1,17 +1,20 @@
config SOUTHBRIDGE_VIA_K8M890
bool
config SOUTHBRIDGE_VIA_K8T890
bool
config SOUTHBRIDGE_VIA_K8T890_VGA_EN
config SOUTHBRIDGE_VIA_K8M890_VGA_EN
bool "Enable onboard K8M890 graphics"
default y
depends on SOUTHBRIDGE_VIA_K8T890
depends on SOUTHBRIDGE_VIA_K8M890
select VGA
select GFXUMA
choice
prompt "Framebuffer size"
default K8M890_VIDEO_MB_32MB
depends on SOUTHBRIDGE_VIA_K8T890_VGA_EN
depends on SOUTHBRIDGE_VIA_K8M890_VGA_EN
config K8M890_VIDEO_MB_32MB
bool "32MB"
@ -33,4 +36,4 @@ config VIDEO_MB
default 128 if K8M890_VIDEO_MB_128MB
default 256 if K8M890_VIDEO_MB_256MB
default -1 if K8M890_VIDEO_MB_CMOS
depends on SOUTHBRIDGE_VIA_K8T890_VGA_EN
depends on SOUTHBRIDGE_VIA_K8M890_VGA_EN

View File

@ -98,7 +98,8 @@ static void dram_enable_k8m890(struct device *dev)
msr = rdmsr(TOP_MEM);
uma_memory_base = msr.lo - uma_memory_size;
printk(BIOS_INFO, "K8M890: UMA base is %llx size is %d (MB)\n", uma_memory_base, uma_memory_size / 1024 / 1024);
printk(BIOS_INFO, "K8M890: UMA base is %llx size is %u (MB)\n", uma_memory_base,
(u32) (uma_memory_size / 1024 / 1024));
/* enable VGA, so the bridges gets VGA_EN and resources are set */
pci_write_config8(dev, 0xa1, 0x80);
#endif
@ -131,7 +132,6 @@ static void dram_init_fb(struct device *dev)
*/
unsigned int fbbits = 0;
u8 tmp;
int ret;
fbbits = ((log2(uma_memory_size >> 20) - 2) << 4);
printk(BIOS_INFO, "K8M890: Using a %dMB framebuffer.\n", (unsigned int) (uma_memory_size >> 20));