From 54662610197d7304b48d8e85a5b13263db3357f2 Mon Sep 17 00:00:00 2001
From: Naresh Solanki <Naresh.Solanki@9elements.com>
Date: Thu, 10 Aug 2023 13:21:44 +0200
Subject: [PATCH] drivers/uart/pl011.c Perform basic UART init

Configure UART baud rate, Line Control register as 8n1 with FIFO
enable and enable UART TX and RX.

Change-Id: I090344a20430dc370a0b93ff7fbbae54111fae24
Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79406
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
---
 src/drivers/uart/pl011.c | 32 ++++++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)

diff --git a/src/drivers/uart/pl011.c b/src/drivers/uart/pl011.c
index 64c279d1b4..06782a3b98 100644
--- a/src/drivers/uart/pl011.c
+++ b/src/drivers/uart/pl011.c
@@ -7,6 +7,38 @@
 
 void uart_init(unsigned int idx)
 {
+	struct pl011_uart *regs = uart_platform_baseptr(idx);
+	uint32_t tmp;
+
+	if (!regs)
+		return;
+
+	/* Disable UART */
+	tmp = read32(&regs->cr);
+	tmp &= ~PL011_UARTCR_UARTEN;
+	write32(&regs->cr, tmp);
+
+	/*
+	 * Program Divisor
+	 * As per: PL011 Technical reference manual:
+	 * BAUDDIV = (Fuartclk / (16 * baud_rate))
+	 * Considering 6 bits(64) for UARTFBRD
+	 * BAUDDIV = (Fuartclk * 4 / baud_rate)
+	 */
+	tmp = uart_platform_refclk() * 4 / get_uart_baudrate();
+
+	write32(&regs->ibrd, tmp >> 6);
+	write32(&regs->fbrd, tmp & 0x3f);
+
+	/* Program LINE Control 8n1, FIFO enable */
+	tmp = read32(&regs->lcr_h);
+	tmp |= PL011_LINE_CONTROL;
+	write32(&regs->lcr_h, tmp);
+
+	/* Enable UART */
+	tmp = read32(&regs->cr);
+	tmp |= PL011_UARTCR_UARTEN | PL011_UARTCR_RXE | PL011_UARTCR_TXE;
+	write32(&regs->cr, tmp);
 }
 
 void uart_tx_byte(unsigned int idx, unsigned char data)