From 54e055179dd19307a8e8ac2c94b224ebe988ed5d Mon Sep 17 00:00:00 2001 From: Timothy Pearson Date: Sat, 9 Apr 2016 21:47:18 -0500 Subject: [PATCH] nb/amd/amdfam10: Write MCT variables to flash after PCI configuration The SPI controller needs to be set up on devices such as the SP5100 before it can be accessed to write MCT backup data. Move the backup data write after PCI configuration has been completed. Change-Id: Ibcf31755242ac058407a422ce8aa33d6b0b293c7 Signed-off-by: Timothy Pearson Reviewed-on: https://review.coreboot.org/14305 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand Reviewed-by: Martin Roth --- src/northbridge/amd/amdfam10/northbridge.c | 11 +++++++---- src/northbridge/amd/amdmct/mct_ddr3/s3utils.c | 8 -------- 2 files changed, 7 insertions(+), 12 deletions(-) diff --git a/src/northbridge/amd/amdfam10/northbridge.c b/src/northbridge/amd/amdfam10/northbridge.c index 06079dd98b..da93175b21 100644 --- a/src/northbridge/amd/amdfam10/northbridge.c +++ b/src/northbridge/amd/amdfam10/northbridge.c @@ -1975,10 +1975,6 @@ static void root_complex_enable_dev(struct device *dev) /* Do not delay UMA setup, as a device on the PCI bus may evaluate the global uma_memory variables already in its enable function. */ if (!done) { -#if IS_ENABLED(CONFIG_HAVE_ACPI_RESUME) && IS_ENABLED(CONFIG_DIMM_DDR3) - save_mct_information_to_nvram(); -#endif - setup_bsp_ramtop(); setup_uma_memory(); done = 1; @@ -1992,7 +1988,14 @@ static void root_complex_enable_dev(struct device *dev) } } +static void root_complex_finalize(void *chip_info) { +#if IS_ENABLED(CONFIG_HAVE_ACPI_RESUME) && IS_ENABLED(CONFIG_DIMM_DDR3) + save_mct_information_to_nvram(); +#endif +} + struct chip_operations northbridge_amd_amdfam10_root_complex_ops = { CHIP_NAME("AMD Family 10h/15h Root Complex") .enable_dev = root_complex_enable_dev, + .final = root_complex_finalize, }; diff --git a/src/northbridge/amd/amdmct/mct_ddr3/s3utils.c b/src/northbridge/amd/amdmct/mct_ddr3/s3utils.c index fe7707591e..6589a39943 100644 --- a/src/northbridge/amd/amdmct/mct_ddr3/s3utils.c +++ b/src/northbridge/amd/amdmct/mct_ddr3/s3utils.c @@ -1132,11 +1132,6 @@ int8_t save_mct_information_to_nvram(void) s3nv_offset &= ~(CONFIG_S3_DATA_SIZE-1); s3nv_offset += CONFIG_S3_DATA_SIZE; - /* Set temporary SPI MMIO address */ - device_t lpc_dev = dev_find_slot(0, PCI_DEVFN(0x14, 3)); - uint32_t spi_mmio_prev = pci_read_config32(lpc_dev, 0xa0); - pci_write_config32(lpc_dev, 0xa0, (spi_mmio_prev & 0x1f) | 0xf0000000); - /* Initialize SPI and detect devices */ spi_init(); flash = spi_flash_probe(0, 0); @@ -1160,9 +1155,6 @@ int8_t save_mct_information_to_nvram(void) flash->spi->rw = SPI_WRITE_FLAG; spi_release_bus(flash->spi); - /* Restore SPI MMIO address */ - pci_write_config32(lpc_dev, 0xa0, spi_mmio_prev); - /* Allow training bypass if DIMM configuration is unchanged on next boot */ nvram = 1; set_option("allow_spd_nvram_cache_restore", &nvram);