soc/intel/common: prepare for lpss clock split

Apparently Intel had decided to use different clock speeds for
some of its IP blocks in some of its designs. The i2c designware driver
has already been moved into common code allowing for its own Kconfig
value. That currently leaves SPI (UART isn't using the clock currently).
Therefore, remove SOC_INTEL_COMMON_LPSS_CLOCK_MHZ and add
SOC_INTEL_COMMON_BLOCK_GSPI_CLOCK_MHZ to allow for the different clock
speeds present in the system for the various IP blocks.

BUG=b:75306520

Change-Id: I6cb8c2de0ff446b6006bc37645fca64f2b70bf17
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/25608
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>

src/soc/intel/apollolake/Kconfig

@@ -159,13 +159,13 @@ config CPU_ADDR_BITS
 	int
 	default 36
 
-config SOC_INTEL_COMMON_LPSS_CLOCK_MHZ
+config SOC_INTEL_COMMON_BLOCK_GSPI_CLOCK_MHZ
 	int
 	default 133
 
 config DRIVERS_I2C_DESIGNWARE_CLOCK_MHZ
 	int
-	default SOC_INTEL_COMMON_LPSS_CLOCK_MHZ
+	default SOC_INTEL_COMMON_BLOCK_GSPI_CLOCK_MHZ
 
 config CONSOLE_UART_BASE_ADDRESS
 	depends on CONSOLE_SERIAL

src/soc/intel/cannonlake/Kconfig

@@ -186,13 +186,13 @@ config SOC_INTEL_CANNONLAKE_LPDDR4_INIT
 	bool
 	default n
 
-config SOC_INTEL_COMMON_LPSS_CLOCK_MHZ
+config SOC_INTEL_COMMON_BLOCK_GSPI_CLOCK_MHZ
 	int
 	default 120
 
 config DRIVERS_I2C_DESIGNWARE_CLOCK_MHZ
 	int
-	default SOC_INTEL_COMMON_LPSS_CLOCK_MHZ
+	default SOC_INTEL_COMMON_BLOCK_GSPI_CLOCK_MHZ
 
 config SOC_INTEL_COMMON_BLOCK_GSPI_MAX
 	int

src/soc/intel/common/Kconfig

@@ -30,13 +30,6 @@ config ACPI_CONSOLE
 	help
 	  Provide a mechanism for serial console based ACPI debug.
 
-config SOC_INTEL_COMMON_LPSS_CLOCK_MHZ
-	int
-	help
-	  The clock speed that the controllers in LPSS(GSPI, I2C) are running
-	  at, in MHz. No default is set here as this is an SOC-specific value
-	  and must be provided by the SOC.
-
 config MMA
 	bool "Enable MMA (Memory Margin Analysis) support for Intel Core"
 	default n

src/soc/intel/common/block/gspi/Kconfig

@@ -3,6 +3,14 @@ config SOC_INTEL_COMMON_BLOCK_GSPI
 	help
 	  Intel Processor Common GSPI support
 
+config SOC_INTEL_COMMON_BLOCK_GSPI_CLOCK_MHZ
+	int
+	depends on SOC_INTEL_COMMON_BLOCK_GSPI
+	help
+	  The input clock speed into the SPI controller IP block, in MHz.
+	  No default is set here as this is an SOC-specific value
+	  and must be provided by the SOC.
+
 config SOC_INTEL_COMMON_BLOCK_GSPI_MAX
 	int
 	depends on SOC_INTEL_COMMON_BLOCK_GSPI

src/soc/intel/common/block/gspi/gspi.c

@@ -380,7 +380,8 @@ static void gspi_cs_deassert(const struct spi_slave *dev)
 
 static uint32_t gspi_get_clk_div(unsigned int gspi_bus)
 {
-	const uint32_t ref_clk_mhz = CONFIG_SOC_INTEL_COMMON_LPSS_CLOCK_MHZ;
+	const uint32_t ref_clk_mhz =
+		CONFIG_SOC_INTEL_COMMON_BLOCK_GSPI_CLOCK_MHZ;
 	const uint32_t gspi_clk_mhz = gspi_get_bus_clk_mhz(gspi_bus);
 
 	assert(gspi_clk_mhz != 0);

src/soc/intel/common/block/include/intelblocks/lpss.h

@@ -22,8 +22,8 @@
 void lpss_reset_release(uintptr_t base);
 
 /*
- * Update clock divider parameters. Clock frequency is
- * configured as SOC_INTEL_COMMON_LPSS_CLOCK_MHZ * (M / N)
+ * Update clock divider parameters. Clock frequency is dependent on source
+ * clock frequency of each IP block. Resulting clock will be src_freq * (M / N).
  */
 void lpss_clk_update(uintptr_t base, uint32_t clk_m_val, uint32_t clk_n_val);
 

src/soc/intel/skylake/Kconfig

@@ -338,13 +338,13 @@ config NO_FADT_8042
 	help
 	  Choose this option if you want to disable 8042 Keyboard
 
-config SOC_INTEL_COMMON_LPSS_CLOCK_MHZ
+config SOC_INTEL_COMMON_BLOCK_GSPI_CLOCK_MHZ
 	int
 	default 120
 
 config DRIVERS_I2C_DESIGNWARE_CLOCK_MHZ
 	int
-	default SOC_INTEL_COMMON_LPSS_CLOCK_MHZ
+	default SOC_INTEL_COMMON_BLOCK_GSPI_CLOCK_MHZ
 
 config SOC_INTEL_COMMON_BLOCK_GSPI_MAX
 	int