diff --git a/src/southbridge/amd/agesa/hudson/smbus_spd.c b/src/southbridge/amd/agesa/hudson/smbus_spd.c
index 7dcbbf9a50..c240e5b877 100644
--- a/src/southbridge/amd/agesa/hudson/smbus_spd.c
+++ b/src/southbridge/amd/agesa/hudson/smbus_spd.c
@@ -16,31 +16,31 @@
  * readSmbusByteData - read a single SPD byte from any offset
  */
 
-static int readSmbusByteData (int iobase, int address, char *buffer, int offset)
+static int readSmbusByteData(int iobase, int address, char *buffer, int offset)
 {
 	unsigned int status;
 	UINT64 limit;
 
 	address |= 1; // set read bit
 
-	__outbyte (iobase + 0, 0xFF);                // clear error status
-	__outbyte (iobase + 1, 0x1F);                // clear error status
-	__outbyte (iobase + 3, offset);              // offset in eeprom
-	__outbyte (iobase + 4, address);             // slave address and read bit
-	__outbyte (iobase + 2, 0x48);                // read byte command
+	__outbyte(iobase + 0, 0xFF);                // clear error status
+	__outbyte(iobase + 1, 0x1F);                // clear error status
+	__outbyte(iobase + 3, offset);              // offset in eeprom
+	__outbyte(iobase + 4, address);             // slave address and read bit
+	__outbyte(iobase + 2, 0x48);                // read byte command
 
 	// time limit to avoid hanging for unexpected error status (should never happen)
-	limit = __rdtsc () + 2000000000 / 10;
+	limit = __rdtsc() + 2000000000 / 10;
 	for (;;)
 	{
-		status = __inbyte (iobase);
-		if (__rdtsc () > limit) break;
+		status = __inbyte(iobase);
+		if (__rdtsc() > limit) break;
 		if ((status & 2) == 0) continue;               // SMBusInterrupt not set, keep waiting
 		if ((status & 1) == 1) continue;               // HostBusy set, keep waiting
 		break;
 	}
 
-	buffer [0] = __inbyte (iobase + 5);
+	buffer [0] = __inbyte(iobase + 5);
 	if (status == 2) status = 0;                      // check for done with no errors
 	return status;
 }
@@ -51,26 +51,26 @@ static int readSmbusByteData (int iobase, int address, char *buffer, int offset)
  *                 this function is faster function readSmbusByteData
  */
 
-static int readSmbusByte (int iobase, int address, char *buffer)
+static int readSmbusByte(int iobase, int address, char *buffer)
 {
 	unsigned int status;
 	UINT64 limit;
 
-	__outbyte (iobase + 0, 0xFF);                // clear error status
-	__outbyte (iobase + 2, 0x44);                // read command
+	__outbyte(iobase + 0, 0xFF);                // clear error status
+	__outbyte(iobase + 2, 0x44);                // read command
 
 	// time limit to avoid hanging for unexpected error status
-	limit = __rdtsc () + 2000000000 / 10;
+	limit = __rdtsc() + 2000000000 / 10;
 	for (;;)
 	{
-		status = __inbyte (iobase);
-		if (__rdtsc () > limit) break;
+		status = __inbyte(iobase);
+		if (__rdtsc() > limit) break;
 		if ((status & 2) == 0) continue;               // SMBusInterrupt not set, keep waiting
 		if ((status & 1) == 1) continue;               // HostBusy set, keep waiting
 		break;
 	}
 
-	buffer [0] = __inbyte (iobase + 5);
+	buffer [0] = __inbyte(iobase + 5);
 	if (status == 2) status = 0;                      // check for done with no errors
 	return status;
 }
@@ -84,7 +84,7 @@ static int readSmbusByte (int iobase, int address, char *buffer)
  *          Reads 128 bytes in 7-8 ms at 400 KHz.
  */
 
-static int readspd (int iobase, int SmbusSlaveAddress, char *buffer, int count)
+static int readspd(int iobase, int SmbusSlaveAddress, char *buffer, int count)
 {
 	int index, error;
 
@@ -93,7 +93,7 @@ static int readspd (int iobase, int SmbusSlaveAddress, char *buffer, int count)
 						iobase, SmbusSlaveAddress, count);
 
 	/* read the first byte using offset zero */
-	error = readSmbusByteData (iobase, SmbusSlaveAddress, buffer, 0);
+	error = readSmbusByteData(iobase, SmbusSlaveAddress, buffer, 0);
 
 	if (error) {
 		printk(BIOS_ERR, "-------------SPD READ ERROR-----------\n");
@@ -103,7 +103,7 @@ static int readspd (int iobase, int SmbusSlaveAddress, char *buffer, int count)
 	/* read the remaining bytes using auto-increment for speed */
 	for (index = 1; index < count; index++)
 	{
-		error = readSmbusByte (iobase, SmbusSlaveAddress, &buffer [index]);
+		error = readSmbusByte(iobase, SmbusSlaveAddress, &buffer [index]);
 		if (error) {
 			printk(BIOS_ERR, "-------------SPD READ ERROR-----------\n");
 			return error;
@@ -115,15 +115,15 @@ static int readspd (int iobase, int SmbusSlaveAddress, char *buffer, int count)
 	return 0;
 }
 
-static void setupFch (int ioBase)
+static void setupFch(int ioBase)
 {
 	pm_write16(0x2c, ioBase | 1);
-	__outbyte (ioBase + 0x0E, 66000000 / 400000 / 4); // set SMBus clock to 400 KHz
+	__outbyte(ioBase + 0x0E, 66000000 / 400000 / 4); // set SMBus clock to 400 KHz
 }
 
 int hudson_readSpd(int spdAddress, char *buf, size_t len)
 {
 	int ioBase = 0xB00;
-	setupFch (ioBase);
-	return readspd (ioBase, spdAddress, buf, len);
+	setupFch(ioBase);
+	return readspd(ioBase, spdAddress, buf, len);
 }
diff --git a/src/southbridge/amd/cimx/sb800/smbus_spd.c b/src/southbridge/amd/cimx/sb800/smbus_spd.c
index 43e7e0097d..35c1cccdb4 100644
--- a/src/southbridge/amd/cimx/sb800/smbus_spd.c
+++ b/src/southbridge/amd/cimx/sb800/smbus_spd.c
@@ -101,6 +101,6 @@ static UINT8 readspd(UINT16 iobase, UINT8 SmbusSlaveAddress, char *buffer,
 int smbus_readSpd(int spdAddress, char *buf, size_t len)
 {
 	int ioBase = SMBUS0_BASE_ADDRESS;
-	setupFch (ioBase);
-	return readspd (ioBase, spdAddress, buf, len);
+	setupFch(ioBase);
+	return readspd(ioBase, spdAddress, buf, len);
 }
diff --git a/src/southbridge/amd/pi/hudson/smbus_spd.c b/src/southbridge/amd/pi/hudson/smbus_spd.c
index 5a890bc9fd..48914058ad 100644
--- a/src/southbridge/amd/pi/hudson/smbus_spd.c
+++ b/src/southbridge/amd/pi/hudson/smbus_spd.c
@@ -16,31 +16,31 @@
  * readSmbusByteData - read a single SPD byte from any offset
  */
 
-static int readSmbusByteData (int iobase, int address, char *buffer, int offset)
+static int readSmbusByteData(int iobase, int address, char *buffer, int offset)
 {
 	unsigned int status;
 	UINT64 limit;
 
 	address |= 1; // set read bit
 
-	__outbyte (iobase + 0, 0xFF);                // clear error status
-	__outbyte (iobase + 1, 0x1F);                // clear error status
-	__outbyte (iobase + 3, offset);              // offset in eeprom
-	__outbyte (iobase + 4, address);             // slave address and read bit
-	__outbyte (iobase + 2, 0x48);                // read byte command
+	__outbyte(iobase + 0, 0xFF);                // clear error status
+	__outbyte(iobase + 1, 0x1F);                // clear error status
+	__outbyte(iobase + 3, offset);              // offset in eeprom
+	__outbyte(iobase + 4, address);             // slave address and read bit
+	__outbyte(iobase + 2, 0x48);                // read byte command
 
 	// time limit to avoid hanging for unexpected error status (should never happen)
-	limit = __rdtsc () + 2000000000 / 10;
+	limit = __rdtsc() + 2000000000 / 10;
 	for (;;)
 	{
-		status = __inbyte (iobase);
-		if (__rdtsc () > limit) break;
+		status = __inbyte(iobase);
+		if (__rdtsc() > limit) break;
 		if ((status & 2) == 0) continue;               // SMBusInterrupt not set, keep waiting
 		if ((status & 1) == 1) continue;               // HostBusy set, keep waiting
 		break;
 	}
 
-	buffer [0] = __inbyte (iobase + 5);
+	buffer [0] = __inbyte(iobase + 5);
 	if (status == 2) status = 0;                      // check for done with no errors
 	return status;
 }
@@ -51,26 +51,26 @@ static int readSmbusByteData (int iobase, int address, char *buffer, int offset)
  *                 this function is faster function readSmbusByteData
  */
 
-static int readSmbusByte (int iobase, int address, char *buffer)
+static int readSmbusByte(int iobase, int address, char *buffer)
 {
 	unsigned int status;
 	UINT64 limit;
 
-	__outbyte (iobase + 0, 0xFF);                // clear error status
-	__outbyte (iobase + 2, 0x44);                // read command
+	__outbyte(iobase + 0, 0xFF);                // clear error status
+	__outbyte(iobase + 2, 0x44);                // read command
 
 	// time limit to avoid hanging for unexpected error status
-	limit = __rdtsc () + 2000000000 / 10;
+	limit = __rdtsc() + 2000000000 / 10;
 	for (;;)
 	{
-		status = __inbyte (iobase);
-		if (__rdtsc () > limit) break;
+		status = __inbyte(iobase);
+		if (__rdtsc() > limit) break;
 		if ((status & 2) == 0) continue;               // SMBusInterrupt not set, keep waiting
 		if ((status & 1) == 1) continue;               // HostBusy set, keep waiting
 		break;
 	}
 
-	buffer [0] = __inbyte (iobase + 5);
+	buffer [0] = __inbyte(iobase + 5);
 	if (status == 2) status = 0;                      // check for done with no errors
 	return status;
 }
@@ -84,7 +84,7 @@ static int readSmbusByte (int iobase, int address, char *buffer)
  *          Reads 128 bytes in 7-8 ms at 400 KHz.
  */
 
-static int readspd (int iobase, int SmbusSlaveAddress, char *buffer, int count)
+static int readspd(int iobase, int SmbusSlaveAddress, char *buffer, int count)
 {
 	int index, error;
 
@@ -93,7 +93,7 @@ static int readspd (int iobase, int SmbusSlaveAddress, char *buffer, int count)
 						iobase, SmbusSlaveAddress, count);
 
 	/* read the first byte using offset zero */
-	error = readSmbusByteData (iobase, SmbusSlaveAddress, buffer, 0);
+	error = readSmbusByteData(iobase, SmbusSlaveAddress, buffer, 0);
 
 	if (error) {
 		printk(BIOS_ERR, "-------------SPD READ ERROR-----------\n");
@@ -103,7 +103,7 @@ static int readspd (int iobase, int SmbusSlaveAddress, char *buffer, int count)
 	/* read the remaining bytes using auto-increment for speed */
 	for (index = 1; index < count; index++)
 	{
-		error = readSmbusByte (iobase, SmbusSlaveAddress, &buffer [index]);
+		error = readSmbusByte(iobase, SmbusSlaveAddress, &buffer [index]);
 		if (error) {
 			printk(BIOS_ERR, "-------------SPD READ ERROR-----------\n");
 			return error;
@@ -115,15 +115,15 @@ static int readspd (int iobase, int SmbusSlaveAddress, char *buffer, int count)
 	return 0;
 }
 
-static void setupFch (int ioBase)
+static void setupFch(int ioBase)
 {
 	pm_write16(0x2c, ioBase | 1);
-	__outbyte (ioBase + 0x0E, 66000000 / 400000 / 4); // set SMBus clock to 400 KHz
+	__outbyte(ioBase + 0x0E, 66000000 / 400000 / 4); // set SMBus clock to 400 KHz
 }
 
 int hudson_readSpd(int spdAddress, char *buf, size_t len)
 {
 	int ioBase = 0xB00;
-	setupFch (ioBase);
-	return readspd (ioBase, spdAddress, buf, len);
+	setupFch(ioBase);
+	return readspd(ioBase, spdAddress, buf, len);
 }