soc/amd: Do SMM relocation via MSR

AMD CPUs have a convenient MSR that allows to set the SMBASE in the save
state without ever entering SMM (e.g. at the default 0x30000 address).
This has been a feature in all AMD CPUs since at least AMD K8. This
allows to do relocation in parallel in ramstage and without setting up a
relocation handler, which likely results in a speedup. The more cores
the higher the speedup as relocation was happening sequentially. On a 4
core AMD picasso system this results in 33ms boot speedup.

TESTED on google/vilboz (Picasso) with CONFIG_SMI_DEBUG: verify that SMM
is correctly relocated with the BSP correctly entering the smihandler.

Change-Id: I9729fb94ed5c18cfd57b8098c838c08a04490e4b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64872
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
This commit is contained in:
Arthur Heymans 2022-05-19 11:31:10 +02:00 committed by Felix Held
parent 576861994e
commit 56776a1ab3
5 changed files with 37 additions and 12 deletions

View File

@ -18,6 +18,15 @@ config PARALLEL_MP_AP_WORK
Allow APs to do other work after initialization instead of going Allow APs to do other work after initialization instead of going
to sleep. to sleep.
config X86_SMM_SKIP_RELOCATION_HANDLER
bool
default n
depends on PARALLEL_MP && HAVE_SMI_HANDLER
help
Skip SMM relocation using a relocation handler running in SMM
with a stub at 0x30000. This is useful on platforms that have
an alternative way to set SMBASE.
config LEGACY_SMP_INIT config LEGACY_SMP_INIT
bool bool

View File

@ -755,6 +755,9 @@ static void adjust_smm_apic_id_map(struct smm_loader_params *smm_params)
static enum cb_err install_relocation_handler(int num_cpus, size_t save_state_size) static enum cb_err install_relocation_handler(int num_cpus, size_t save_state_size)
{ {
if (CONFIG(X86_SMM_SKIP_RELOCATION_HANDLER))
return CB_SUCCESS;
struct smm_loader_params smm_params = { struct smm_loader_params smm_params = {
.num_cpus = num_cpus, .num_cpus = num_cpus,
.cpu_save_state_size = save_state_size, .cpu_save_state_size = save_state_size,
@ -1136,9 +1139,13 @@ static enum cb_err do_mp_init_with_smm(struct bus *cpu_bus, const struct mp_ops
} }
/* Sanity check SMM state. */ /* Sanity check SMM state. */
if (mp_state.perm_smsize != 0 && mp_state.smm_save_state_size != 0 &&
mp_state.ops.relocation_handler != NULL)
smm_enable(); smm_enable();
if (mp_state.perm_smsize == 0)
smm_disable();
if (mp_state.smm_save_state_size == 0)
smm_disable();
if (!CONFIG(X86_SMM_SKIP_RELOCATION_HANDLER) && mp_state.ops.relocation_handler == NULL)
smm_disable();
if (is_smm_enabled()) if (is_smm_enabled())
printk(BIOS_INFO, "Will perform SMM setup.\n"); printk(BIOS_INFO, "Will perform SMM setup.\n");
@ -1151,11 +1158,13 @@ static enum cb_err do_mp_init_with_smm(struct bus *cpu_bus, const struct mp_ops
mp_params.flight_plan = &mp_steps[0]; mp_params.flight_plan = &mp_steps[0];
mp_params.num_records = ARRAY_SIZE(mp_steps); mp_params.num_records = ARRAY_SIZE(mp_steps);
/* Perform backup of default SMM area. */ /* Perform backup of default SMM area when using SMM relocation handler. */
if (!CONFIG(X86_SMM_SKIP_RELOCATION_HANDLER))
default_smm_area = backup_default_smm_area(); default_smm_area = backup_default_smm_area();
ret = mp_init(cpu_bus, &mp_params); ret = mp_init(cpu_bus, &mp_params);
if (!CONFIG(X86_SMM_SKIP_RELOCATION_HANDLER))
restore_default_smm_area(default_smm_area); restore_default_smm_area(default_smm_area);
/* Signal callback on success if it's provided. */ /* Signal callback on success if it's provided. */

View File

@ -57,6 +57,9 @@ struct mp_ops {
/* /*
* Optional function to use to trigger SMM to perform relocation. If * Optional function to use to trigger SMM to perform relocation. If
* not provided, smm_initiate_relocation() is used. * not provided, smm_initiate_relocation() is used.
* This function is called on each CPU.
* On platforms that select CONFIG(X86_SMM_SKIP_RELOCATION_HANDLER) to
* not relocate in SMM, this function can be used to relocate CPUs.
*/ */
void (*per_cpu_smm_trigger)(void); void (*per_cpu_smm_trigger)(void);
/* /*
@ -66,6 +69,7 @@ struct mp_ops {
* running the relocation handler, current SMBASE of relocation handler, * running the relocation handler, current SMBASE of relocation handler,
* and the pre-calculated staggered CPU SMBASE address of the permanent * and the pre-calculated staggered CPU SMBASE address of the permanent
* SMM handler. * SMM handler.
* This function is only called with !CONFIG(X86_SMM_SKIP_RELOCATION_HANDLER) set.
*/ */
void (*relocation_handler)(int cpu, uintptr_t curr_smbase, void (*relocation_handler)(int cpu, uintptr_t curr_smbase,
uintptr_t staggered_smbase); uintptr_t staggered_smbase);

View File

@ -57,6 +57,7 @@ config SOC_AMD_COMMON_BLOCK_MCAX
config SOC_AMD_COMMON_BLOCK_SMM config SOC_AMD_COMMON_BLOCK_SMM
bool bool
select X86_SMM_SKIP_RELOCATION_HANDLER if HAVE_SMI_HANDLER
help help
Add common SMM relocation, finalization and handler functionality to Add common SMM relocation, finalization and handler functionality to
the build. the build.

View File

@ -57,10 +57,8 @@ static void tseg_valid(void)
wrmsr(SMM_MASK_MSR, mask); wrmsr(SMM_MASK_MSR, mask);
} }
static void smm_relocation_handler(int cpu, uintptr_t curr_smbase, uintptr_t staggered_smbase) static void smm_relocation_handler(void)
{ {
amd64_smm_state_save_area_t *smm_state;
uintptr_t tseg_base; uintptr_t tseg_base;
size_t tseg_size; size_t tseg_size;
@ -76,8 +74,12 @@ static void smm_relocation_handler(int cpu, uintptr_t curr_smbase, uintptr_t sta
msr.hi = (1 << (cpu_phys_address_size() - 32)) - 1; msr.hi = (1 << (cpu_phys_address_size() - 32)) - 1;
wrmsr(SMM_MASK_MSR, msr); wrmsr(SMM_MASK_MSR, msr);
smm_state = (void *)(SMM_AMD64_SAVE_STATE_OFFSET + curr_smbase); uintptr_t smbase = smm_get_cpu_smbase(cpu_index());
smm_state->smbase = staggered_smbase; msr_t smm_base = {
.hi = 0,
.lo = smbase
};
wrmsr(SMM_BASE_MSR, smm_base);
tseg_valid(); tseg_valid();
lock_smm(); lock_smm();
@ -87,6 +89,6 @@ const struct mp_ops amd_mp_ops_with_smm = {
.pre_mp_init = pre_mp_init, .pre_mp_init = pre_mp_init,
.get_cpu_count = get_cpu_count, .get_cpu_count = get_cpu_count,
.get_smm_info = get_smm_info, .get_smm_info = get_smm_info,
.relocation_handler = smm_relocation_handler, .per_cpu_smm_trigger = smm_relocation_handler,
.post_mp_init = global_smi_enable, .post_mp_init = global_smi_enable,
}; };