drivers: Fix spelling

Change-Id: Ib0d98e3ab5b2943c36f88765587e8963a4f49604
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/3754
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>

src/drivers/ati/ragexl/mach64.h

@@ -1045,7 +1045,7 @@
 #define SCISSOR_TOP_FLAG	0x40
 #define SCISSOR_BOTTOM_FLAG	0x80
 
-/* ATI VGA Extended Regsiters */
+/* ATI VGA Extended Registers */
 #define sioATIEXT		0x1ce
 #define bioATIEXT		0x3ce
 
@@ -1057,7 +1057,7 @@
 #define VGAGRA			0x3ce
 #define GRA06			0x06
 
-/* VGA Seququencer Registers */
+/* VGA Sequencer Registers */
 #define VGASEQ			0x3c4
 #define SEQ02			0x02
 #define SEQ04			0x04

src/drivers/elog/elog.c

@@ -629,7 +629,7 @@ static int elog_flash_area_bootstrap(void)
 
 /*
  * Shrink the log, deleting old entries and moving the
- * remining ones to the front of the log.
+ * remaining ones to the front of the log.
  */
 static int elog_shrink(void)
 {

src/drivers/elog/gsmi.c

@@ -96,7 +96,7 @@ u32 gsmi_exec(u8 command, u32 *param)
 		break;
 
 	case GSMI_CMD_CLEAR_EVENT_LOG:
-		/* Get paramter buffer even though we don't use it */
+		/* Get parameter buffer even though we don't use it */
 		cel = (struct gsmi_clear_eventlog_param *)(*param);
 		if (!cel)
 			break;

src/drivers/i2c/w83795/w83795.c

@@ -77,7 +77,7 @@ static void w83795_dts_enable(u8 dts_src)
 	/* store bank3 regs first before enable DTS */
 
 	/*
-	 * TD/TR1-4 termal diode by default
+	 * TD/TR1-4 thermal diode by default
 	 *  0x00 Disable
 	 *  0x01 thermistors on motherboard
 	 *  0x10 different mode voltage
@@ -169,7 +169,7 @@ static void w83795_set_fan(w83795_fan_mode_t mode)
 		//SFIV TODO
 	}
 
-	/* Set Hystersis of Temperature (HT) */
+	/* Set Hysteresis of Temperature (HT) */
 	//TODO
 }
 

src/drivers/i2c/w83795/w83795.h

@@ -38,9 +38,9 @@
 #define DTS_SRC_AMD_SBTSI		(1 << 0)
 
 #define W83795_REG_TSS(n)		(0x209 + (n)) /* Temperature Source Selection Register */
-#define W83795_REG_TTTI(n)		(0x260 + (n)) /* tarrget temperature W83795G/ADG will try to tune the fan output to keep */
+#define W83795_REG_TTTI(n)		(0x260 + (n)) /* Target temperature W83795G/ADG will try to tune the fan output to keep */
 #define W83795_REG_CTFS(n)		(0x268 + (n)) /* Critical Temperature to Full Speed all fan */
-#define W83795_REG_HT(n)		(0x270 + (n)) /* Hystersis of Temperature */
+#define W83795_REG_HT(n)		(0x270 + (n)) /* Hysteresis of Temperature */
 #define W83795_REG_DTSC			0x301 /* Digital Temperature Sensor Configuration */
 
 #define W83795_REG_DTSE			0x302 /* Digital Temperature Sensor Enable */

src/drivers/oxford/oxpcie/oxpcie_early.c

@@ -64,7 +64,7 @@ void oxford_init(void)
 			CONFIG_OXFORD_OXPCIE_BRIDGE_SUBORDINATE);
 
 	/* Memory window for the OXPCIe952 card */
-	// XXX is the calculation of base and limit corect?
+	// XXX is the calculation of base and limit correct?
 	pci_write_config32(PCIE_BRIDGE, PCI_MEMORY_BASE,
 			((CONFIG_OXFORD_OXPCIE_BASE_ADDRESS & 0xffff0000) |
 			((CONFIG_OXFORD_OXPCIE_BASE_ADDRESS >> 16) & 0xff00)));

src/drivers/pc80/i8259.c

@@ -94,7 +94,7 @@ void setup_i8259(void)
 	/* Now clear the interrupts through OCW1.
 	 * First we mask off all interrupts on the slave interrupt controller
 	 * then we mask off all interrupts but interrupt 2 on the master
-	 * controller. This way the cascading stays alife.
+	 * controller. This way the cascading stays alive.
 	 */
 	outb(ALL_IRQS, SLAVE_PIC_OCW1);
 	outb(ALL_IRQS & ~IRQ2, MASTER_PIC_OCW1);

src/drivers/pc80/mc146818rtc.c

@@ -132,7 +132,7 @@ void rtc_init(int invalid)
 	/*
 	 * Avoid clearing pending interrupts in the resume path because
 	 * the Linux kernel relies on this to know if it should restart
-	 * the RTC timerqueue if the wake was due to the RTC alarm.
+	 * the RTC timer queue if the wake was due to the RTC alarm.
 	 */
 	if (acpi_slp_type == 3)
 		return;

src/drivers/pc80/tpm.c

@@ -565,7 +565,7 @@ int tis_open(void)
 /*
  * tis_close()
  *
- * terminate the currect session with the TPM by releasing the locked
+ * terminate the current session with the TPM by releasing the locked
  * locality. Returns 0 on success of TPM_DRIVER_ERR on failure (in case lock
  * removal did not succeed).
  */