Intel ICH7 updates
- code restructuring (move ich7 out of i945) - ACPI fixes - major SMI handler updates - make sure SMBus lives where we expect it - try to get usb debug working Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4456 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This commit is contained in:
Stefan Reinauer
Stefan Reinauer
parent
71a3d96bc4
commit
573f7d40be
|
|
@ -0,0 +1,161 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the coreboot project.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2007-2009 coresystems GmbH
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or
|
||||||
|
* modify it under the terms of the GNU General Public License as
|
||||||
|
* published by the Free Software Foundation; version 2 of
|
||||||
|
* the License.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program; if not, write to the Free Software
|
||||||
|
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
|
||||||
|
* MA 02110-1301 USA
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* Global Variables */
|
||||||
|
|
||||||
|
Name(\PICM, 0) // IOAPIC/8259
|
||||||
|
Name(\DSEN, 1) // Display Output Switching Enable
|
||||||
|
|
||||||
|
/* Global ACPI memory region. This region is used for passing information
|
||||||
|
* between coreboot (aka "the system bios"), ACPI, and the SMI handler.
|
||||||
|
* Since we don't know where this will end up in memory at ACPI compile time,
|
||||||
|
* we have to fix it up in coreboot's ACPI creation phase.
|
||||||
|
*/
|
||||||
|
|
||||||
|
|
||||||
|
OperationRegion (GNVS, SystemMemory, 0xC0DEBABE, 0x100)
|
||||||
|
Field (GNVS, ByteAcc, NoLock, Preserve)
|
||||||
|
{
|
||||||
|
/* Miscellaneous */
|
||||||
|
Offset (0x00),
|
||||||
|
OSYS, 16, // 0x00 - Operating System
|
||||||
|
SMIF, 8, // 0x02 - SMI function
|
||||||
|
PRM0, 8, // 0x03 - SMI function parameter
|
||||||
|
PRM1, 8, // 0x04 - SMI function parameter
|
||||||
|
SCIF, 8, // 0x05 - SCI function
|
||||||
|
PRM2, 8, // 0x06 - SCI function parameter
|
||||||
|
PRM3, 8, // 0x07 - SCI function parameter
|
||||||
|
LCKF, 8, // 0x08 - Global Lock function for EC
|
||||||
|
PRM4, 8, // 0x09 - Lock function parameter
|
||||||
|
PRM5, 8, // 0x0a - Lock function parameter
|
||||||
|
P80D, 32, // 0x0b - Debug port (IO 0x80) value
|
||||||
|
LIDS, 8, // 0x0f - LID state (open = 1)
|
||||||
|
PWRS, 8, // 0x10 - Power State (AC = 1)
|
||||||
|
DBGS, 8, // 0x11 - Debug State
|
||||||
|
LINX, 8, // 0x12 - Linux OS
|
||||||
|
DCKN, 8, // 0x13 - PCIe docking state
|
||||||
|
/* Thermal policy */
|
||||||
|
Offset (0x14),
|
||||||
|
ACTT, 8, // 0x14 - active trip point
|
||||||
|
PSVT, 8, // 0x15 - passive trip point
|
||||||
|
TC1V, 8, // 0x16 - passive trip point TC1
|
||||||
|
TC2V, 8, // 0x17 - passive trip point TC2
|
||||||
|
TSPV, 8, // 0x18 - passive trip point TSP
|
||||||
|
CRTT, 8, // 0x19 - critical trip point
|
||||||
|
DTSE, 8, // 0x1a - Digital Thermal Sensor enable
|
||||||
|
DTS1, 8, // 0x1b - DT sensor 1
|
||||||
|
DTS2, 8, // 0x1c - DT sensor 2
|
||||||
|
/* Battery Support */
|
||||||
|
Offset (0x1e),
|
||||||
|
BNUM, 8, // 0x1e - number of batteries
|
||||||
|
B0SC, 8, // 0x1f - BAT0 stored capacity
|
||||||
|
B1SC, 8, // 0x20 - BAT1 stored capacity
|
||||||
|
B2SC, 8, // 0x21 - BAT2 stored capacity
|
||||||
|
B0SS, 8, // 0x22 - BAT0 stored status
|
||||||
|
B1SS, 8, // 0x23 - BAT1 stored status
|
||||||
|
B2SS, 8, // 0x24 - BAT2 stored status
|
||||||
|
/* Processor Identification */
|
||||||
|
Offset (0x28),
|
||||||
|
APIC, 8, // 0x28 - APIC Enabled by coreboot
|
||||||
|
MPEN, 8, // 0x29 - Multi Processor Enable
|
||||||
|
PCP0, 8, // 0x2a - PDC CPU/CORE 0
|
||||||
|
PCP1, 8, // 0x2b - PDC CPU/CORE 1
|
||||||
|
PPCM, 8, // 0x2c - Max. PPC state
|
||||||
|
/* Super I/O & CMOS config */
|
||||||
|
Offset (0x32),
|
||||||
|
NATP, 8, // 0x32 - ...
|
||||||
|
/* Integrated Graphics Device */
|
||||||
|
Offset (0x3c),
|
||||||
|
IGDS, 8, // 0x3c - IGD state (primary = 1)
|
||||||
|
TLST, 8, // 0x3d - Display Toggle List pointer
|
||||||
|
CADL, 8, // 0x3e - Currently Attached Devices List
|
||||||
|
PADL, 8, // 0x3f - Previously Attached Devices List
|
||||||
|
CSTE, 16, // 0x40 - Current display state
|
||||||
|
NSTE, 16, // 0x42 - Next display state
|
||||||
|
SSTE, 16, // 0x44 - Set display state
|
||||||
|
Offset (0x46),
|
||||||
|
NDID, 8, // 0x46 - Number of Device IDs
|
||||||
|
DID1, 32, // 0x47 - Device ID 1
|
||||||
|
DID2, 32, // 0x4b - Device ID 2
|
||||||
|
DID3, 32, // 0x4f - Device ID 3
|
||||||
|
DID4, 32, // 0x53 - Device ID 4
|
||||||
|
DID5, 32, // 0x57 - Device ID 5
|
||||||
|
/* Backlight Control */
|
||||||
|
Offset (0x64),
|
||||||
|
BLCS, 8, // 0x64 - Backlight control possible?
|
||||||
|
BRTL, 8, // 0x65 - Brightness Level
|
||||||
|
ODDS, 8, // 0x66
|
||||||
|
/* Ambient Light Sensors */
|
||||||
|
Offset (0x6e),
|
||||||
|
ALSE, 8, // 0x6e - ALS enable
|
||||||
|
ALAF, 8, // 0x6f - Ambient light adjustment factor
|
||||||
|
LLOW, 8, // 0x70 - LUX Low
|
||||||
|
LHIH, 8, // 0x71 - LUX High
|
||||||
|
/* EMA */
|
||||||
|
Offset (0x78),
|
||||||
|
EMAE, 8, // 0x78 - EMA enable
|
||||||
|
EMAP, 16, // 0x79 - EMA pointer
|
||||||
|
EMAL, 16, // 0x7b - EMA length
|
||||||
|
/* MEF */
|
||||||
|
Offset (0x82),
|
||||||
|
MEFE, 8, // 0x82 - MEF enable
|
||||||
|
/* TPM support */
|
||||||
|
Offset (0x8c),
|
||||||
|
TPMP, 8, // 0x8c - TPM
|
||||||
|
TPME, 8, // 0x8d - TPM enable
|
||||||
|
/* SATA */
|
||||||
|
Offset (0x96),
|
||||||
|
GTF0, 56, // 0x96 - GTF task file buffer for port 0
|
||||||
|
GTF1, 56, // 0x9d - GTF task file buffer for port 1
|
||||||
|
GTF2, 56, // 0xa4 - GTF task file buffer for port 2
|
||||||
|
IDEM, 8, // 0xab - IDE mode (compatible / enhanced)
|
||||||
|
IDET, 8, // 0xac - IDE
|
||||||
|
/* IGD OpRegion */
|
||||||
|
Offset (0xb4),
|
||||||
|
ASLB, 32, // 0xb4 - IGD OpRegion Base Address
|
||||||
|
IBTT, 8, // 0xb8 - IGD boot panel device
|
||||||
|
IPAT, 8, // 0xb9 - IGD panel type cmos option
|
||||||
|
ITVF, 8, // 0xba - IGD TV format cmos option
|
||||||
|
ITVM, 8, // 0xbb - IGD TV minor format option
|
||||||
|
IPSC, 8, // 0xbc - IGD panel scaling
|
||||||
|
IBLC, 8, // 0xbd - IGD BLC config
|
||||||
|
IBIA, 8, // 0xbe - IGD BIA config
|
||||||
|
ISSC, 8, // 0xbf - IGD SSC config
|
||||||
|
I409, 8, // 0xc0 - IGD 0409 modified settings
|
||||||
|
I509, 8, // 0xc1 - IGD 0509 modified settings
|
||||||
|
I609, 8, // 0xc2 - IGD 0609 modified settings
|
||||||
|
I709, 8, // 0xc3 - IGD 0709 modified settings
|
||||||
|
IDMM, 8, // 0xc4 - IGD DVMT Mode
|
||||||
|
IDMS, 8, // 0xc5 - IGD DVMT memory size
|
||||||
|
IF1E, 8, // 0xc6 - IGD function 1 enable
|
||||||
|
HVCO, 8, // 0xc7 - IGD HPLL VCO
|
||||||
|
NXD1, 32, // 0xc8 - IGD _DGS next DID1
|
||||||
|
NXD2, 32, // 0xcc - IGD _DGS next DID2
|
||||||
|
NXD3, 32, // 0xd0 - IGD _DGS next DID3
|
||||||
|
NXD4, 32, // 0xd4 - IGD _DGS next DID4
|
||||||
|
NXD5, 32, // 0xd8 - IGD _DGS next DID5
|
||||||
|
NXD6, 32, // 0xdc - IGD _DGS next DID6
|
||||||
|
NXD7, 32, // 0xe0 - IGD _DGS next DID7
|
||||||
|
NXD8, 32, // 0xe4 - IGD _DGS next DID8
|
||||||
|
/* Mainboard Specific (TODO move elsewhere) */
|
||||||
|
Offset (0xf0),
|
||||||
|
DOCK, 8, // 0xf0 - Docking Status
|
||||||
|
}
|
||||||
|
|
@ -92,7 +92,8 @@ Scope(\)
|
||||||
Offset(0x38), // GPIO Level 2
|
Offset(0x38), // GPIO Level 2
|
||||||
, 5,
|
, 5,
|
||||||
GP37, 1, // PATA_PWR_EN
|
GP37, 1, // PATA_PWR_EN
|
||||||
, 2,
|
GP38, 1, // Battery / Power (?)
|
||||||
|
GP39, 1, // ??
|
||||||
GL05, 8,
|
GL05, 8,
|
||||||
GL06, 8,
|
GL06, 8,
|
||||||
GL07, 8
|
GL07, 8
|
||||||
|
|
@ -100,7 +101,7 @@ Scope(\)
|
||||||
|
|
||||||
|
|
||||||
// ICH7 Root Complex Register Block. Memory Mapped through RCBA)
|
// ICH7 Root Complex Register Block. Memory Mapped through RCBA)
|
||||||
OperationRegion(RCRB, SystemMemory, 0xfff1000, 0x4000)
|
OperationRegion(RCRB, SystemMemory, 0xfed1c000, 0x4000)
|
||||||
Field(RCRB, DWordAcc, Lock, Preserve)
|
Field(RCRB, DWordAcc, Lock, Preserve)
|
||||||
{
|
{
|
||||||
Offset(0x0000), // Backbone
|
Offset(0x0000), // Backbone
|
||||||
|
|
@ -111,12 +112,22 @@ Scope(\)
|
||||||
, 5,
|
, 5,
|
||||||
HPTE, 1, // Address Enable
|
HPTE, 1, // Address Enable
|
||||||
Offset(0x3418), // FD (Function Disable)
|
Offset(0x3418), // FD (Function Disable)
|
||||||
, 1,
|
, 1, // Reserved
|
||||||
PATD, 1, // PATA disable
|
PATD, 1, // PATA disable
|
||||||
SATD, 1, // SATA disable
|
SATD, 1, // SATA disable
|
||||||
SMBD, 1, // SMBUS disable
|
SMBD, 1, // SMBUS disable
|
||||||
HDAD, 1, // Azalia disable
|
HDAD, 1, // Azalia disable
|
||||||
, 11, // ... FIXME
|
A97D, 1, // AC'97 disable
|
||||||
|
M97D, 1, // AC'97 disable
|
||||||
|
ILND, 1, // Internal LAN disable
|
||||||
|
US1D, 1, // UHCI #1 disable
|
||||||
|
US2D, 1, // UHCI #2 disable
|
||||||
|
US3D, 1, // UHCI #3 disable
|
||||||
|
US4D, 1, // UHCI #4 disable
|
||||||
|
, 2, // Reserved
|
||||||
|
LPBD, 1, // LPC bridge disable
|
||||||
|
EHCD, 1, // EHCI disable
|
||||||
|
Offset(0x341a), // FD Root Ports
|
||||||
RP1D, 1, // Root Port 1 disable
|
RP1D, 1, // Root Port 1 disable
|
||||||
RP2D, 1, // Root Port 2 disable
|
RP2D, 1, // Root Port 2 disable
|
||||||
RP3D, 1, // Root Port 3 disable
|
RP3D, 1, // Root Port 3 disable
|
||||||
|
|
@ -139,6 +150,9 @@ Include ("../../../southbridge/intel/i82801gx/acpi/ich7_usb.asl")
|
||||||
// PCI Bridge
|
// PCI Bridge
|
||||||
Include ("../../../southbridge/intel/i82801gx/acpi/ich7_pci.asl")
|
Include ("../../../southbridge/intel/i82801gx/acpi/ich7_pci.asl")
|
||||||
|
|
||||||
|
// AC97 Audio and Modem
|
||||||
|
Include ("../../../southbridge/intel/i82801gx/acpi/ich7_ac97.asl")
|
||||||
|
|
||||||
// LPC Bridge
|
// LPC Bridge
|
||||||
Include ("../../../southbridge/intel/i82801gx/acpi/ich7_lpc.asl")
|
Include ("../../../southbridge/intel/i82801gx/acpi/ich7_lpc.asl")
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -0,0 +1,40 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the coreboot project.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2007-2009 coresystems GmbH
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or
|
||||||
|
* modify it under the terms of the GNU General Public License as
|
||||||
|
* published by the Free Software Foundation; version 2 of
|
||||||
|
* the License.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program; if not, write to the Free Software
|
||||||
|
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
|
||||||
|
* MA 02110-1301 USA
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* Intel i82801G AC'97 Audio and Modem */
|
||||||
|
|
||||||
|
// Intel AC'97 Audio 0:1e.2
|
||||||
|
|
||||||
|
Device (AUD0)
|
||||||
|
{
|
||||||
|
Name (_ADR, 0x001e0002)
|
||||||
|
}
|
||||||
|
|
||||||
|
// Intel AC'97 Modem 0:1e.3
|
||||||
|
|
||||||
|
Device (MODM)
|
||||||
|
{
|
||||||
|
Name (_ADR, 0x001e0003)
|
||||||
|
|
||||||
|
Name (_PRW, Package(){ 5, 4 })
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
|
@ -27,6 +27,10 @@ Device (HDEF)
|
||||||
{
|
{
|
||||||
Name (_ADR, 0x001b0000)
|
Name (_ADR, 0x001b0000)
|
||||||
|
|
||||||
Name (_PRW, Package(){ 13, 4 })
|
// Power Resources for Wake
|
||||||
|
Name (_PRW, Package(){
|
||||||
|
5, // Bit 5 of GPE
|
||||||
|
4 // Can wake from S4 state.
|
||||||
|
})
|
||||||
}
|
}
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -68,7 +68,7 @@ Device (LPCB)
|
||||||
})
|
})
|
||||||
}
|
}
|
||||||
|
|
||||||
Device (FWHD) // Firmware Hub
|
Device (FWH) // Firmware Hub
|
||||||
{
|
{
|
||||||
Name (_HID, EISAID("INT0800"))
|
Name (_HID, EISAID("INT0800"))
|
||||||
Name (_CRS, ResourceTemplate()
|
Name (_CRS, ResourceTemplate()
|
||||||
|
|
@ -80,7 +80,7 @@ Device (LPCB)
|
||||||
Device (HPET)
|
Device (HPET)
|
||||||
{
|
{
|
||||||
Name (_HID, EISAID("PNP0103"))
|
Name (_HID, EISAID("PNP0103"))
|
||||||
Name (_CID, EISAID("PNP0C01"))
|
Name (_CID, 0x010CD041)
|
||||||
|
|
||||||
Name(BUF0, ResourceTemplate()
|
Name(BUF0, ResourceTemplate()
|
||||||
{
|
{
|
||||||
|
|
@ -92,18 +92,32 @@ Device (LPCB)
|
||||||
If (HPTE) {
|
If (HPTE) {
|
||||||
// Note: Ancient versions of Windows don't want
|
// Note: Ancient versions of Windows don't want
|
||||||
// to see the HPET in order to work right
|
// to see the HPET in order to work right
|
||||||
// Return (0xb) // Enable and don't show device
|
If (LGreaterEqual(OSYS, 2001)) {
|
||||||
|
|
||||||
Return (0xf) // Enable and show device
|
Return (0xf) // Enable and show device
|
||||||
|
} Else {
|
||||||
|
Return (0xb) // Enable and don't show device
|
||||||
|
}
|
||||||
}
|
}
|
||||||
|
|
||||||
Return (0x0) // Not enabled, don't show.
|
Return (0x0) // Not enabled, don't show.
|
||||||
}
|
}
|
||||||
|
|
||||||
Method (_CRS, 0, Serialized)
|
Method (_CRS, 0, Serialized) // Current resources
|
||||||
{
|
{
|
||||||
// Here we could do crazy stuff like move the HPET. Why
|
If (HPTE) {
|
||||||
// should we?
|
CreateDWordField(BUF0, \_SB.PCI0.LPCB.HPET.FED0._BAS, HPT0)
|
||||||
|
If (Lequal(HPAS, 1)) {
|
||||||
|
Store(0xfed01000, HPT0)
|
||||||
|
}
|
||||||
|
|
||||||
|
If (Lequal(HPAS, 2)) {
|
||||||
|
Store(0xfed02000, HPT0)
|
||||||
|
}
|
||||||
|
|
||||||
|
If (Lequal(HPAS, 3)) {
|
||||||
|
Store(0xfed03000, HPT0)
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
Return (BUF0)
|
Return (BUF0)
|
||||||
}
|
}
|
||||||
|
|
@ -130,7 +144,7 @@ Device (LPCB)
|
||||||
IO (Decode16, 0xb4, 0xb4, 0x01, 0x02)
|
IO (Decode16, 0xb4, 0xb4, 0x01, 0x02)
|
||||||
IO (Decode16, 0xb8, 0xb8, 0x01, 0x02)
|
IO (Decode16, 0xb8, 0xb8, 0x01, 0x02)
|
||||||
IO (Decode16, 0xbc, 0xbc, 0x01, 0x02)
|
IO (Decode16, 0xbc, 0xbc, 0x01, 0x02)
|
||||||
IO (Decode16, 0x4d0, 0x4b0, 0x01, 0x02)
|
IO (Decode16, 0x4d0, 0x4d0, 0x01, 0x02)
|
||||||
IRQNoFlags () { 2 }
|
IRQNoFlags () { 2 }
|
||||||
})
|
})
|
||||||
}
|
}
|
||||||
|
|
@ -145,7 +159,7 @@ Device (LPCB)
|
||||||
})
|
})
|
||||||
}
|
}
|
||||||
|
|
||||||
Device(MISC) // Various other devices
|
Device(LDRC) // LPC device: Resource consumption
|
||||||
{
|
{
|
||||||
Name (_HID, EISAID("PNP0C02"))
|
Name (_HID, EISAID("PNP0C02"))
|
||||||
Name (_UID, 2)
|
Name (_UID, 2)
|
||||||
|
|
@ -153,18 +167,18 @@ Device (LPCB)
|
||||||
{
|
{
|
||||||
IO (Decode16, 0x2e, 0x2e, 0x1, 0x02) // First SuperIO
|
IO (Decode16, 0x2e, 0x2e, 0x1, 0x02) // First SuperIO
|
||||||
IO (Decode16, 0x4e, 0x4e, 0x1, 0x02) // Second SuperIO
|
IO (Decode16, 0x4e, 0x4e, 0x1, 0x02) // Second SuperIO
|
||||||
IO (Decode16, 0x61, 0x61, 0x1, 0x1) // NMI Status
|
IO (Decode16, 0x61, 0x61, 0x1, 0x01) // NMI Status
|
||||||
IO (Decode16, 0x63, 0x63, 0x1, 0x1) // CPU Reserved
|
IO (Decode16, 0x63, 0x63, 0x1, 0x01) // CPU Reserved
|
||||||
IO (Decode16, 0x65, 0x65, 0x1, 0x1) // CPU Reserved
|
IO (Decode16, 0x65, 0x65, 0x1, 0x01) // CPU Reserved
|
||||||
IO (Decode16, 0x67, 0x67, 0x1, 0x1) // CPU Reserved
|
IO (Decode16, 0x67, 0x67, 0x1, 0x01) // CPU Reserved
|
||||||
IO (Decode16, 0x80, 0x80, 0x1, 0x1) // Port 80 Post
|
IO (Decode16, 0x80, 0x80, 0x1, 0x01) // Port 80 Post
|
||||||
IO (Decode16, 0x92, 0x92, 0x1, 0x1) // CPU Reserved
|
IO (Decode16, 0x92, 0x92, 0x1, 0x01) // CPU Reserved
|
||||||
IO (Decode16, 0xb2, 0xb2, 0x1, 0x02) // SWSMI
|
IO (Decode16, 0xb2, 0xb2, 0x1, 0x02) // SWSMI
|
||||||
IO (Decode16, 0x680, 0x680, 0x1, 0x70) // IO ???
|
// IO (Decode16, 0x680, 0x680, 0x1, 0x70) // IO ???
|
||||||
IO (Decode16, 0x800, 0x800, 0x1, 0x10) // ACPI I/O trap
|
IO (Decode16, 0x800, 0x800, 0x1, 0x10) // ACPI I/O trap
|
||||||
IO (Decode16, 0x0500, 0x0500, 0x1, 0x80) // ICH7-M ACPI
|
IO (Decode16, 0x0500, 0x0500, 0x1, 0x80) // ICH7-M ACPI
|
||||||
IO (Decode16, 0x1180, 0x1180, 0x1, 0x40) // ICH7-M GPIO
|
IO (Decode16, 0x0480, 0x0480, 0x1, 0x40) // ICH7-M GPIO
|
||||||
IO (Decode16, 0x1640, 0x1640, 0x1, 0x10) // IO ???
|
// IO (Decode16, 0x1640, 0x1640, 0x1, 0x10) // IO ???
|
||||||
})
|
})
|
||||||
}
|
}
|
||||||
|
|
||||||
|
|
@ -194,12 +208,19 @@ Device (LPCB)
|
||||||
Device (PS2K) // Keyboard
|
Device (PS2K) // Keyboard
|
||||||
{
|
{
|
||||||
Name(_HID, EISAID("PNP0303"))
|
Name(_HID, EISAID("PNP0303"))
|
||||||
|
Name(_CID, EISAID("PNP030B"))
|
||||||
|
|
||||||
Name(_CRS, ResourceTemplate()
|
Name(_CRS, ResourceTemplate()
|
||||||
{
|
{
|
||||||
IO (Decode16, 0x60, 0x60, 0x01, 0x01)
|
IO (Decode16, 0x60, 0x60, 0x01, 0x01)
|
||||||
IO (Decode16, 0x64, 0x64, 0x01, 0x01)
|
IO (Decode16, 0x64, 0x64, 0x01, 0x01)
|
||||||
IRQ (Edge, ActiveHigh, Exclusive) { 0x01 } // IRQ 1
|
IRQ (Edge, ActiveHigh, Exclusive) { 0x01 } // IRQ 1
|
||||||
})
|
})
|
||||||
|
|
||||||
|
Method (_STA, 0)
|
||||||
|
{
|
||||||
|
Return (0xf)
|
||||||
|
}
|
||||||
}
|
}
|
||||||
|
|
||||||
Device (PS2M) // Mouse
|
Device (PS2M) // Mouse
|
||||||
|
|
@ -209,5 +230,36 @@ Device (LPCB)
|
||||||
{
|
{
|
||||||
IRQ (Edge, ActiveHigh, Exclusive) { 0x0c } // IRQ 12
|
IRQ (Edge, ActiveHigh, Exclusive) { 0x0c } // IRQ 12
|
||||||
})
|
})
|
||||||
|
|
||||||
|
Method(_STA, 0)
|
||||||
|
{
|
||||||
|
Return (0xf)
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
Device (FDC0) // Floppy controller
|
||||||
|
{
|
||||||
|
Name (_HID, EisaId ("PNP0700"))
|
||||||
|
Method (_STA, 0, NotSerialized)
|
||||||
|
{
|
||||||
|
Return (0x0f) // FIXME
|
||||||
|
}
|
||||||
|
|
||||||
|
Name(_CRS, ResourceTemplate()
|
||||||
|
{
|
||||||
|
IO (Decode16, 0x03F0, 0x03F0, 0x01, 0x06)
|
||||||
|
IO (Decode16, 0x03F7, 0x03F7, 0x01, 0x01)
|
||||||
|
IRQNoFlags () {6}
|
||||||
|
DMA (Compatibility, NotBusMaster, Transfer8) {2}
|
||||||
|
})
|
||||||
|
|
||||||
|
Name(_PRS, ResourceTemplate()
|
||||||
|
{
|
||||||
|
IO (Decode16, 0x03F0, 0x03F0, 0x01, 0x06)
|
||||||
|
IO (Decode16, 0x03F7, 0x03F7, 0x01, 0x01)
|
||||||
|
IRQNoFlags () {6}
|
||||||
|
DMA (Compatibility, NotBusMaster, Transfer8) {2}
|
||||||
|
})
|
||||||
|
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
|
|
|
||||||
|
|
@ -43,6 +43,24 @@ Device (PCIB)
|
||||||
Name (_PRW, Package(){ 11, 4 })
|
Name (_PRW, Package(){ 11, 4 })
|
||||||
}
|
}
|
||||||
|
|
||||||
|
Device (SLT6)
|
||||||
|
{
|
||||||
|
Name (_ADR, 0x00050000)
|
||||||
|
Name (_PRW, Package(){ 11, 4 })
|
||||||
|
}
|
||||||
|
|
||||||
|
Device (LANC)
|
||||||
|
{
|
||||||
|
Name (_ADR, 0x00080000)
|
||||||
|
Name (_PRW, Package(){ 11, 3 })
|
||||||
|
}
|
||||||
|
|
||||||
|
Device (LANR)
|
||||||
|
{
|
||||||
|
Name (_ADR, 0x00000000)
|
||||||
|
Name (_PRW, Package(){ 11, 3 })
|
||||||
|
}
|
||||||
|
|
||||||
// TODO: How many slots, where?
|
// TODO: How many slots, where?
|
||||||
|
|
||||||
// PCI Interrupt Routing.
|
// PCI Interrupt Routing.
|
||||||
|
|
@ -52,47 +70,7 @@ Device (PCIB)
|
||||||
|
|
||||||
Method (_PRT)
|
Method (_PRT)
|
||||||
{
|
{
|
||||||
If (PICM) {
|
Include ("acpi/ich7_pci_irqs.asl")
|
||||||
Return (Package() {
|
|
||||||
// PCI Slot 1 routes FGHE
|
|
||||||
Package() { 0x0000ffff, 0, 0, 16}, /* Firewire */
|
|
||||||
Package() { 0x0000ffff, 1, 0, 22},
|
|
||||||
Package() { 0x0000ffff, 2, 0, 23},
|
|
||||||
Package() { 0x0000ffff, 3, 0, 20},
|
|
||||||
|
|
||||||
// PCI Slot 2 routes GFEH (but is EFGH now, because that actually works)
|
|
||||||
Package() { 0x0001ffff, 0, 0, 20},
|
|
||||||
Package() { 0x0001ffff, 1, 0, 21},
|
|
||||||
Package() { 0x0001ffff, 2, 0, 22},
|
|
||||||
Package() { 0x0001ffff, 3, 0, 23},
|
|
||||||
|
|
||||||
// PCI Slot 3 routes CDBA
|
|
||||||
Package() { 0x0002ffff, 0, 0, 18},
|
|
||||||
Package() { 0x0002ffff, 1, 0, 19},
|
|
||||||
Package() { 0x0002ffff, 2, 0, 17},
|
|
||||||
Package() { 0x0002ffff, 3, 0, 16}
|
|
||||||
})
|
|
||||||
} Else {
|
|
||||||
Return (Package() {
|
|
||||||
// PCI Slot 1 routes FGHE
|
|
||||||
Package() { 0x0000ffff, 0, \_SB.PCI0.LPCB.LNKF, 0},
|
|
||||||
Package() { 0x0000ffff, 1, \_SB.PCI0.LPCB.LNKE, 0},
|
|
||||||
Package() { 0x0000ffff, 2, \_SB.PCI0.LPCB.LNKH, 0},
|
|
||||||
Package() { 0x0000ffff, 3, \_SB.PCI0.LPCB.LNKG, 0},
|
|
||||||
|
|
||||||
// PCI Slot 2 routes GFEH
|
|
||||||
Package() { 0x0001ffff, 0, \_SB.PCI0.LPCB.LNKG, 0},
|
|
||||||
Package() { 0x0001ffff, 1, \_SB.PCI0.LPCB.LNKF, 0},
|
|
||||||
Package() { 0x0001ffff, 2, \_SB.PCI0.LPCB.LNKE, 0},
|
|
||||||
Package() { 0x0001ffff, 3, \_SB.PCI0.LPCB.LNKH, 0},
|
|
||||||
|
|
||||||
// PCI Slot 3 routes CDBA
|
|
||||||
Package() { 0x0002ffff, 0, \_SB.PCI0.LPCB.LNKC, 0},
|
|
||||||
Package() { 0x0002ffff, 1, \_SB.PCI0.LPCB.LNKD, 0},
|
|
||||||
Package() { 0x0002ffff, 2, \_SB.PCI0.LPCB.LNKB, 0},
|
|
||||||
Package() { 0x0002ffff, 3, \_SB.PCI0.LPCB.LNKA, 0},
|
|
||||||
})
|
|
||||||
}
|
|
||||||
}
|
}
|
||||||
|
|
||||||
}
|
}
|
||||||
|
|
|
||||||
|
|
@ -33,7 +33,8 @@ Device (SBUS)
|
||||||
I2CE, 1
|
I2CE, 1
|
||||||
}
|
}
|
||||||
|
|
||||||
OperationRegion (SMBI, SystemIO, 0x500, 0x20)
|
/*
|
||||||
|
OperationRegion (SMBI, SystemIO, 0x400, 0x20)
|
||||||
Field (SMBI, ByteAcc, NoLock, Preserve)
|
Field (SMBI, ByteAcc, NoLock, Preserve)
|
||||||
{
|
{
|
||||||
HSTS, 8, // Host Status
|
HSTS, 8, // Host Status
|
||||||
|
|
@ -236,6 +237,7 @@ Device (SBUS)
|
||||||
|
|
||||||
Return (0xffff)
|
Return (0xffff)
|
||||||
}
|
}
|
||||||
|
*/
|
||||||
|
|
||||||
// Todo: Does anyone ever use these?
|
// Todo: Does anyone ever use these?
|
||||||
// Missing: Read / Write Word
|
// Missing: Read / Write Word
|
||||||
|
|
|
||||||
|
|
@ -0,0 +1,27 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the coreboot project.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2007-2009 coresystems GmbH
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or
|
||||||
|
* modify it under the terms of the GNU General Public License as
|
||||||
|
* published by the Free Software Foundation; version 2 of
|
||||||
|
* the License.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program; if not, write to the Free Software
|
||||||
|
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
|
||||||
|
* MA 02110-1301 USA
|
||||||
|
*/
|
||||||
|
|
||||||
|
Name(\_S0, Package(4){0x0,0x0,0,0})
|
||||||
|
Name(\_S1, Package(4){0x1,0x0,0,0})
|
||||||
|
Name(\_S3, Package(4){0x5,0x0,0,0})
|
||||||
|
Name(\_S4, Package(4){0x6,0x0,0,0})
|
||||||
|
Name(\_S5, Package(4){0x7,0x0,0,0})
|
||||||
|
|
||||||
|
|
@ -21,8 +21,15 @@
|
||||||
#ifndef SOUTHBRIDGE_INTEL_I82801GX_I82801GX_H
|
#ifndef SOUTHBRIDGE_INTEL_I82801GX_I82801GX_H
|
||||||
#define SOUTHBRIDGE_INTEL_I82801GX_I82801GX_H
|
#define SOUTHBRIDGE_INTEL_I82801GX_I82801GX_H
|
||||||
|
|
||||||
|
/* __ROMCC__ is set by auto.c to make sure
|
||||||
|
* none of the stage2 data structures are included.
|
||||||
|
*/
|
||||||
|
#ifndef __ROMCC__
|
||||||
#include "chip.h"
|
#include "chip.h"
|
||||||
extern void i82801gx_enable(device_t dev);
|
extern void i82801gx_enable(device_t dev);
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* PCI Configuration Space (D31:F0): LPC */
|
||||||
|
|
||||||
#define SERIRQ_CNTL 0x64
|
#define SERIRQ_CNTL 0x64
|
||||||
|
|
||||||
|
|
@ -58,7 +65,31 @@ extern void i82801gx_enable(device_t dev);
|
||||||
#define IDE_TIM_PRI 0x40 /* IDE timings, primary */
|
#define IDE_TIM_PRI 0x40 /* IDE timings, primary */
|
||||||
#define IDE_DECODE_ENABLE (1 << 15)
|
#define IDE_DECODE_ENABLE (1 << 15)
|
||||||
#define IDE_SITRE (1 << 14)
|
#define IDE_SITRE (1 << 14)
|
||||||
|
#define IDE_ISP_5_CLOCKS (0 << 12)
|
||||||
|
#define IDE_ISP_4_CLOCKS (1 << 12)
|
||||||
|
#define IDE_ISP_3_CLOCKS (2 << 12)
|
||||||
|
#define IDE_RCT_4_CLOCKS (0 << 8)
|
||||||
|
#define IDE_RCT_3_CLOCKS (1 << 8)
|
||||||
|
#define IDE_RCT_2_CLOCKS (2 << 8)
|
||||||
|
#define IDE_RCT_1_CLOCKS (3 << 8)
|
||||||
|
#define IDE_DTE1 (1 << 7)
|
||||||
|
#define IDE_PPE1 (1 << 6)
|
||||||
|
#define IDE_IE1 (1 << 5)
|
||||||
|
#define IDE_TIME1 (1 << 4)
|
||||||
|
#define IDE_DTE0 (1 << 3)
|
||||||
|
#define IDE_PPE0 (1 << 2)
|
||||||
|
#define IDE_IE0 (1 << 1)
|
||||||
|
#define IDE_TIME0 (1 << 0)
|
||||||
#define IDE_TIM_SEC 0x42 /* IDE timings, secondary */
|
#define IDE_TIM_SEC 0x42 /* IDE timings, secondary */
|
||||||
|
|
||||||
|
#define IDE_SDMA_CNT 0x48 /* Synchronous DMA control */
|
||||||
|
#define IDE_SSDE1 (1 << 3)
|
||||||
|
#define IDE_SSDE0 (1 << 2)
|
||||||
|
#define IDE_PSDE1 (1 << 1)
|
||||||
|
#define IDE_PSDE0 (1 << 0)
|
||||||
|
|
||||||
|
#define IDE_SDMA_TIM 0x4a
|
||||||
|
|
||||||
#define IDE_CONFIG 0x54 /* IDE I/O Configuration Register */
|
#define IDE_CONFIG 0x54 /* IDE I/O Configuration Register */
|
||||||
#define SIG_MODE_NORMAL (0 << 16)
|
#define SIG_MODE_NORMAL (0 << 16)
|
||||||
#define SIG_MODE_TRISTATE (1 << 16)
|
#define SIG_MODE_TRISTATE (1 << 16)
|
||||||
|
|
@ -78,12 +109,13 @@ extern void i82801gx_enable(device_t dev);
|
||||||
#define HST_EN (1 << 0)
|
#define HST_EN (1 << 0)
|
||||||
|
|
||||||
/* SMBus I/O bits.
|
/* SMBus I/O bits.
|
||||||
* TODO: It does not matter where we put the SMBus IO base, as long as we keep
|
* It does not matter where we put the SMBus I/O base, as long as we
|
||||||
* consistent and don't interfere with other devices. Stage2 will relocate
|
* keep it consistent and don't interfere with other devices. Stage2
|
||||||
* this anyways. But it's a general problem we have not solved in the brightest
|
* will relocate this anyways.
|
||||||
* possible way.
|
* Our solution is to have SMB initialization move the I/O to SMBUS_IO_BASE
|
||||||
|
* again. But handling static BARs is a generic problem that should be
|
||||||
|
* solved in the device allocator.
|
||||||
*/
|
*/
|
||||||
/* #define SMBUS_IO_BASE 0x1000 */
|
|
||||||
#define SMBUS_IO_BASE 0x0400
|
#define SMBUS_IO_BASE 0x0400
|
||||||
|
|
||||||
#define SMBHSTSTAT 0x0
|
#define SMBHSTSTAT 0x0
|
||||||
|
|
@ -103,4 +135,124 @@ extern void i82801gx_enable(device_t dev);
|
||||||
/* HPET, if present */
|
/* HPET, if present */
|
||||||
#define HPET_ADDR 0xfed0000
|
#define HPET_ADDR 0xfed0000
|
||||||
|
|
||||||
|
/* Southbridge IO BARs */
|
||||||
|
|
||||||
|
/* TODO Make sure these don't get changed by stage2 */
|
||||||
|
#define GPIOBASE 0x48
|
||||||
|
#define DEFAULT_GPIOBASE 0x480
|
||||||
|
|
||||||
|
#define PMBASE 0x40
|
||||||
|
#define DEFAULT_PMBASE 0x500
|
||||||
|
|
||||||
|
/* Root Complex Register Block */
|
||||||
|
#define RCBA 0xf0
|
||||||
|
#define DEFAULT_RCBA 0xfed1c000
|
||||||
|
|
||||||
|
#define RCBA8(x) *((volatile u8 *)(DEFAULT_RCBA + x))
|
||||||
|
#define RCBA16(x) *((volatile u16 *)(DEFAULT_RCBA + x))
|
||||||
|
#define RCBA32(x) *((volatile u32 *)(DEFAULT_RCBA + x))
|
||||||
|
|
||||||
|
#define VCH 0x0000 /* 32bit */
|
||||||
|
#define VCAP1 0x0004 /* 32bit */
|
||||||
|
#define VCAP2 0x0008 /* 32bit */
|
||||||
|
#define PVC 0x000c /* 16bit */
|
||||||
|
#define PVS 0x000e /* 16bit */
|
||||||
|
|
||||||
|
#define V0CAP 0x0010 /* 32bit */
|
||||||
|
#define V0CTL 0x0014 /* 32bit */
|
||||||
|
#define V0STS 0x001a /* 16bit */
|
||||||
|
|
||||||
|
#define V1CAP 0x001c /* 32bit */
|
||||||
|
#define V1CTL 0x0020 /* 32bit */
|
||||||
|
#define V1STS 0x0026 /* 16bit */
|
||||||
|
|
||||||
|
#define RCTCL 0x0100 /* 32bit */
|
||||||
|
#define ESD 0x0104 /* 32bit */
|
||||||
|
#define ULD 0x0110 /* 32bit */
|
||||||
|
#define ULBA 0x0118 /* 64bit */
|
||||||
|
|
||||||
|
#define RP1D 0x0120 /* 32bit */
|
||||||
|
#define RP1BA 0x0128 /* 64bit */
|
||||||
|
#define RP2D 0x0130 /* 32bit */
|
||||||
|
#define RP2BA 0x0138 /* 64bit */
|
||||||
|
#define RP3D 0x0140 /* 32bit */
|
||||||
|
#define RP3BA 0x0148 /* 64bit */
|
||||||
|
#define RP4D 0x0150 /* 32bit */
|
||||||
|
#define RP4BA 0x0158 /* 64bit */
|
||||||
|
#define HDD 0x0160 /* 32bit */
|
||||||
|
#define HDBA 0x0168 /* 64bit */
|
||||||
|
#define RP5D 0x0170 /* 32bit */
|
||||||
|
#define RP5BA 0x0178 /* 64bit */
|
||||||
|
#define RP6D 0x0180 /* 32bit */
|
||||||
|
#define RP6BA 0x0188 /* 64bit */
|
||||||
|
|
||||||
|
#define ILCL 0x01a0 /* 32bit */
|
||||||
|
#define LCAP 0x01a4 /* 32bit */
|
||||||
|
#define LCTL 0x01a8 /* 16bit */
|
||||||
|
#define LSTS 0x01aa /* 16bit */
|
||||||
|
|
||||||
|
#define RPC 0x0224 /* 32bit */
|
||||||
|
#define RPFN 0x0238 /* 32bit */
|
||||||
|
|
||||||
|
#define TRSR 0x1e00 /* 8bit */
|
||||||
|
#define TRCR 0x1e10 /* 64bit */
|
||||||
|
#define TWDR 0x1e18 /* 64bit */
|
||||||
|
|
||||||
|
#define IOTR0 0x1e80 /* 64bit */
|
||||||
|
#define IOTR1 0x1e88 /* 64bit */
|
||||||
|
#define IOTR2 0x1e90 /* 64bit */
|
||||||
|
#define IOTR3 0x1e98 /* 64bit */
|
||||||
|
|
||||||
|
#define TCTL 0x3000 /* 8bit */
|
||||||
|
|
||||||
|
#define D31IP 0x3100 /* 32bit */
|
||||||
|
#define D30IP 0x3104 /* 32bit */
|
||||||
|
#define D29IP 0x3108 /* 32bit */
|
||||||
|
#define D28IP 0x310c /* 32bit */
|
||||||
|
#define D27IP 0x3110 /* 32bit */
|
||||||
|
#define D31IR 0x3140 /* 16bit */
|
||||||
|
#define D30IR 0x3142 /* 16bit */
|
||||||
|
#define D29IR 0x3144 /* 16bit */
|
||||||
|
#define D28IR 0x3146 /* 16bit */
|
||||||
|
#define D27IR 0x3148 /* 16bit */
|
||||||
|
#define OIC 0x31ff /* 8bit */
|
||||||
|
|
||||||
|
#define RC 0x3400 /* 32bit */
|
||||||
|
#define HPTC 0x3404 /* 32bit */
|
||||||
|
#define GCS 0x3410 /* 32bit */
|
||||||
|
#define BUC 0x3414 /* 32bit */
|
||||||
|
#define FD 0x3418 /* 32bit */
|
||||||
|
#define CG 0x341c /* 32bit */
|
||||||
|
|
||||||
|
/* Function Disable (FD) register values.
|
||||||
|
* Setting a bit disables the corresponding
|
||||||
|
* feature.
|
||||||
|
* Not all features might be disabled on
|
||||||
|
* all chipsets. Esp. ICH-7U is picky.
|
||||||
|
*/
|
||||||
|
#define FD_PCIE6 (1 << 21)
|
||||||
|
#define FD_PCIE5 (1 << 20)
|
||||||
|
#define FD_PCIE4 (1 << 19)
|
||||||
|
#define FD_PCIE3 (1 << 18)
|
||||||
|
#define FD_PCIE2 (1 << 17)
|
||||||
|
#define FD_PCIE1 (1 << 16)
|
||||||
|
#define FD_EHCI (1 << 15)
|
||||||
|
#define FD_LPCB (1 << 14)
|
||||||
|
|
||||||
|
/* UHCI must be disabled from 4 downwards.
|
||||||
|
* If UHCI controllers get disabled, EHCI
|
||||||
|
* must know about it, too! */
|
||||||
|
#define FD_UHCI4 (1 << 11)
|
||||||
|
#define FD_UHCI34 (1 << 10) | FD_UHCI4
|
||||||
|
#define FD_UHCI234 (1 << 9) | FD_UHCI3
|
||||||
|
#define FD_UHCI1234 (1 << 8) | FD_UHCI2
|
||||||
|
|
||||||
|
#define FD_INTLAN (1 << 7)
|
||||||
|
#define FD_ACMOD (1 << 6)
|
||||||
|
#define FD_ACAUD (1 << 5)
|
||||||
|
#define FD_HDAUD (1 << 4)
|
||||||
|
#define FD_SMBUS (1 << 3)
|
||||||
|
#define FD_SATA (1 << 2)
|
||||||
|
#define FD_PATA (1 << 1)
|
||||||
|
|
||||||
#endif /* SOUTHBRIDGE_INTEL_I82801GX_I82801GX_H */
|
#endif /* SOUTHBRIDGE_INTEL_I82801GX_I82801GX_H */
|
||||||
|
|
|
||||||
|
|
@ -251,6 +251,21 @@ static void ac97_modem_init(struct device *dev)
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
|
|
||||||
|
static void ac97_set_subsystem(device_t dev, unsigned vendor, unsigned device)
|
||||||
|
{
|
||||||
|
if (!vendor || !device) {
|
||||||
|
pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
|
||||||
|
pci_read_config32(dev, PCI_VENDOR_ID));
|
||||||
|
} else {
|
||||||
|
pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
|
||||||
|
((device & 0xffff) << 16) | (vendor & 0xffff));
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
static struct pci_operations ac97_pci_ops = {
|
||||||
|
.set_subsystem = ac97_set_subsystem,
|
||||||
|
};
|
||||||
|
|
||||||
static struct device_operations ac97_audio_ops = {
|
static struct device_operations ac97_audio_ops = {
|
||||||
.read_resources = pci_dev_read_resources,
|
.read_resources = pci_dev_read_resources,
|
||||||
.set_resources = pci_dev_set_resources,
|
.set_resources = pci_dev_set_resources,
|
||||||
|
|
@ -258,6 +273,7 @@ static struct device_operations ac97_audio_ops = {
|
||||||
.init = ac97_audio_init,
|
.init = ac97_audio_init,
|
||||||
.scan_bus = 0,
|
.scan_bus = 0,
|
||||||
.enable = i82801gx_enable,
|
.enable = i82801gx_enable,
|
||||||
|
.ops_pci = &ac97_pci_ops,
|
||||||
};
|
};
|
||||||
|
|
||||||
static struct device_operations ac97_modem_ops = {
|
static struct device_operations ac97_modem_ops = {
|
||||||
|
|
@ -267,6 +283,7 @@ static struct device_operations ac97_modem_ops = {
|
||||||
.init = ac97_modem_init,
|
.init = ac97_modem_init,
|
||||||
.scan_bus = 0,
|
.scan_bus = 0,
|
||||||
.enable = i82801gx_enable,
|
.enable = i82801gx_enable,
|
||||||
|
.ops_pci = &ac97_pci_ops,
|
||||||
};
|
};
|
||||||
|
|
||||||
/* 82801GB/GR/GDH/GBM/GHM (ICH7/ICH7R/ICH7DH/ICH7-M/ICH7-M DH) */
|
/* 82801GB/GR/GDH/GBM/GHM (ICH7/ICH7R/ICH7DH/ICH7-M/ICH7-M DH) */
|
||||||
|
|
|
||||||
|
|
@ -27,18 +27,13 @@
|
||||||
#include <pc80/i8259.h>
|
#include <pc80/i8259.h>
|
||||||
#include <arch/io.h>
|
#include <arch/io.h>
|
||||||
#include "i82801gx.h"
|
#include "i82801gx.h"
|
||||||
|
#include "i82801gx_power.h"
|
||||||
#include "../../../northbridge/intel/i945/ich7.h"
|
|
||||||
|
|
||||||
#define MAINBOARD_POWER_OFF 0
|
|
||||||
#define MAINBOARD_POWER_ON 1
|
|
||||||
|
|
||||||
#ifndef CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
|
|
||||||
#define CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL MAINBOARD_POWER_ON
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#define NMI_OFF 0
|
#define NMI_OFF 0
|
||||||
|
|
||||||
|
#define ENABLE_ACPI_MODE_IN_COREBOOT 0
|
||||||
|
#define TEST_SMM_FLASH_LOCKDOWN 0
|
||||||
|
|
||||||
typedef struct southbridge_intel_i82801gx_config config_t;
|
typedef struct southbridge_intel_i82801gx_config config_t;
|
||||||
|
|
||||||
/* PIRQ[n]_ROUT[3:0] - PIRQ Routing Control
|
/* PIRQ[n]_ROUT[3:0] - PIRQ Routing Control
|
||||||
|
|
@ -78,7 +73,9 @@ static void i82801gx_enable_apic(struct device *dev)
|
||||||
volatile u32 *ioapic_index = (volatile u32 *)0xfec00000;
|
volatile u32 *ioapic_index = (volatile u32 *)0xfec00000;
|
||||||
volatile u32 *ioapic_data = (volatile u32 *)0xfec00010;
|
volatile u32 *ioapic_data = (volatile u32 *)0xfec00010;
|
||||||
|
|
||||||
/* Enable ACPI I/O and power management. */
|
/* Enable ACPI I/O and power management.
|
||||||
|
* Set SCI IRQ to IRQ9
|
||||||
|
*/
|
||||||
pci_write_config8(dev, ACPI_CNTL, 0x80);
|
pci_write_config8(dev, ACPI_CNTL, 0x80);
|
||||||
|
|
||||||
*ioapic_index = 0;
|
*ioapic_index = 0;
|
||||||
|
|
@ -109,6 +106,27 @@ static void i82801gx_enable_serial_irqs(struct device *dev)
|
||||||
(1 << 7) | (1 << 6) | ((21 - 17) << 2) | (0 << 0));
|
(1 << 7) | (1 << 6) | ((21 - 17) << 2) | (0 << 0));
|
||||||
}
|
}
|
||||||
|
|
||||||
|
/* PIRQ[n]_ROUT[3:0] - PIRQ Routing Control
|
||||||
|
* 0x00 - 0000 = Reserved
|
||||||
|
* 0x01 - 0001 = Reserved
|
||||||
|
* 0x02 - 0010 = Reserved
|
||||||
|
* 0x03 - 0011 = IRQ3
|
||||||
|
* 0x04 - 0100 = IRQ4
|
||||||
|
* 0x05 - 0101 = IRQ5
|
||||||
|
* 0x06 - 0110 = IRQ6
|
||||||
|
* 0x07 - 0111 = IRQ7
|
||||||
|
* 0x08 - 1000 = Reserved
|
||||||
|
* 0x09 - 1001 = IRQ9
|
||||||
|
* 0x0A - 1010 = IRQ10
|
||||||
|
* 0x0B - 1011 = IRQ11
|
||||||
|
* 0x0C - 1100 = IRQ12
|
||||||
|
* 0x0D - 1101 = Reserved
|
||||||
|
* 0x0E - 1110 = IRQ14
|
||||||
|
* 0x0F - 1111 = IRQ15
|
||||||
|
* PIRQ[n]_ROUT[7] - PIRQ Routing Control
|
||||||
|
* 0x80 - The PIRQ is not routed.
|
||||||
|
*/
|
||||||
|
|
||||||
static void i82801gx_pirq_init(device_t dev)
|
static void i82801gx_pirq_init(device_t dev)
|
||||||
{
|
{
|
||||||
device_t irq_dev;
|
device_t irq_dev;
|
||||||
|
|
@ -180,10 +198,14 @@ static void i82801gx_gpi_routing(device_t dev)
|
||||||
pci_write_config32(dev, 0xb8, reg32);
|
pci_write_config32(dev, 0xb8, reg32);
|
||||||
}
|
}
|
||||||
|
|
||||||
|
extern u8 acpi_slp_type;
|
||||||
|
|
||||||
static void i82801gx_power_options(device_t dev)
|
static void i82801gx_power_options(device_t dev)
|
||||||
{
|
{
|
||||||
u8 reg8;
|
u8 reg8;
|
||||||
u16 reg16;
|
u16 reg16, pmbase;
|
||||||
|
u32 reg32;
|
||||||
|
char *state;
|
||||||
|
|
||||||
int pwr_on=CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL;
|
int pwr_on=CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL;
|
||||||
int nmi_option;
|
int nmi_option;
|
||||||
|
|
@ -195,16 +217,28 @@ static void i82801gx_power_options(device_t dev)
|
||||||
get_option(&pwr_on, "power_on_after_fail");
|
get_option(&pwr_on, "power_on_after_fail");
|
||||||
reg8 = pci_read_config8(dev, GEN_PMCON_3);
|
reg8 = pci_read_config8(dev, GEN_PMCON_3);
|
||||||
reg8 &= 0xfe;
|
reg8 &= 0xfe;
|
||||||
if (pwr_on) {
|
switch (pwr_on) {
|
||||||
reg8 &= ~1;
|
case MAINBOARD_POWER_OFF:
|
||||||
} else {
|
|
||||||
reg8 |= 1;
|
reg8 |= 1;
|
||||||
|
state = "off";
|
||||||
|
break;
|
||||||
|
case MAINBOARD_POWER_ON:
|
||||||
|
reg8 &= ~1;
|
||||||
|
state = "on";
|
||||||
|
break;
|
||||||
|
case MAINBOARD_POWER_KEEP:
|
||||||
|
reg8 &= ~1;
|
||||||
|
state = "state keep";
|
||||||
|
break;
|
||||||
|
default:
|
||||||
|
state = "undefined";
|
||||||
}
|
}
|
||||||
|
|
||||||
reg8 |= (3 << 4); /* avoid #S4 assertions */
|
reg8 |= (3 << 4); /* avoid #S4 assertions */
|
||||||
reg8 &= ~(1 << 3); /* minimum asssertion is 1 to 2 RTCCLK */
|
reg8 &= ~(1 << 3); /* minimum asssertion is 1 to 2 RTCCLK */
|
||||||
|
|
||||||
pci_write_config8(dev, GEN_PMCON_3, reg8);
|
pci_write_config8(dev, GEN_PMCON_3, reg8);
|
||||||
printk_info("Set power %s after power failure.\n", pwr_on ? "on" : "off");
|
printk_info("Set power %s after power failure.\n", state);
|
||||||
|
|
||||||
/* Set up NMI on errors. */
|
/* Set up NMI on errors. */
|
||||||
reg8 = inb(0x61);
|
reg8 = inb(0x61);
|
||||||
|
|
@ -226,7 +260,7 @@ static void i82801gx_power_options(device_t dev)
|
||||||
}
|
}
|
||||||
outb(reg8, 0x70);
|
outb(reg8, 0x70);
|
||||||
|
|
||||||
// Enable CPU_SLP# and Intel Speedstep, set SMI# rate down
|
/* Enable CPU_SLP# and Intel Speedstep, set SMI# rate down */
|
||||||
reg16 = pci_read_config16(dev, GEN_PMCON_1);
|
reg16 = pci_read_config16(dev, GEN_PMCON_1);
|
||||||
reg16 &= ~((3 << 0) | (1 << 10));
|
reg16 &= ~((3 << 0) | (1 << 10));
|
||||||
reg16 |= (1 << 3) | (1 << 5);
|
reg16 |= (1 << 3) | (1 << 5);
|
||||||
|
|
@ -235,6 +269,18 @@ static void i82801gx_power_options(device_t dev)
|
||||||
|
|
||||||
// Set the board's GPI routing.
|
// Set the board's GPI routing.
|
||||||
i82801gx_gpi_routing(dev);
|
i82801gx_gpi_routing(dev);
|
||||||
|
|
||||||
|
/* Set up power management block and determine sleep mode */
|
||||||
|
pmbase = pci_read_config16(dev, 0x40) & 0xfffe;
|
||||||
|
reg32 = inl(pmbase + 0x04); // PM1_CNT
|
||||||
|
#if HAVE_ACPI_RESUME
|
||||||
|
acpi_slp_type = (((reg32 >> 10) & 7) == 5) ? 3 : 0;
|
||||||
|
printk_debug("PM1_CNT: 0x%08x --> acpi_sleep_type: %x\n",
|
||||||
|
reg32, acpi_slp_type);
|
||||||
|
#endif
|
||||||
|
reg32 |= (1 << 1); // enable C3->C0 transition on bus master
|
||||||
|
reg32 |= 1; // SCI_EN
|
||||||
|
outl(reg32, pmbase + 0x04);
|
||||||
}
|
}
|
||||||
|
|
||||||
static void i82801gx_configure_cstates(device_t dev)
|
static void i82801gx_configure_cstates(device_t dev)
|
||||||
|
|
@ -273,9 +319,10 @@ static void enable_hpet(void)
|
||||||
{
|
{
|
||||||
u32 reg32;
|
u32 reg32;
|
||||||
|
|
||||||
/* Leave HPET at default address, but enable it */
|
/* Move HPET to default address 0xfed00000 and enable it */
|
||||||
reg32 = RCBA32(0x3404);
|
reg32 = RCBA32(0x3404);
|
||||||
reg32 |= (1 << 7); // HPET Address Enable
|
reg32 |= (1 << 7); // HPET Address Enable
|
||||||
|
reg32 &= ~(3 << 0);
|
||||||
RCBA32(0x3404) = reg32;
|
RCBA32(0x3404) = reg32;
|
||||||
}
|
}
|
||||||
|
|
||||||
|
|
@ -467,6 +514,13 @@ static struct device_operations device_ops = {
|
||||||
.ops_pci = &pci_ops,
|
.ops_pci = &pci_ops,
|
||||||
};
|
};
|
||||||
|
|
||||||
|
/* 82801GH (ICH7 DH) */
|
||||||
|
static const struct pci_driver ich7_dh_lpc __pci_driver = {
|
||||||
|
.ops = &device_ops,
|
||||||
|
.vendor = PCI_VENDOR_ID_INTEL,
|
||||||
|
.device = 0x27b0,
|
||||||
|
};
|
||||||
|
|
||||||
/* 82801GB/GR (ICH7/ICH7R) */
|
/* 82801GB/GR (ICH7/ICH7R) */
|
||||||
static const struct pci_driver ich7_ich7r_lpc __pci_driver = {
|
static const struct pci_driver ich7_ich7r_lpc __pci_driver = {
|
||||||
.ops = &device_ops,
|
.ops = &device_ops,
|
||||||
|
|
|
||||||
|
|
@ -1,7 +1,7 @@
|
||||||
/*
|
/*
|
||||||
* This file is part of the coreboot project.
|
* This file is part of the coreboot project.
|
||||||
*
|
*
|
||||||
* Copyright (C) 2008 coresystems GmbH
|
* Copyright (C) 2008-2009 coresystems GmbH
|
||||||
*
|
*
|
||||||
* This program is free software; you can redistribute it and/or
|
* This program is free software; you can redistribute it and/or
|
||||||
* modify it under the terms of the GNU General Public License as
|
* modify it under the terms of the GNU General Public License as
|
||||||
|
|
@ -20,44 +20,48 @@
|
||||||
*/
|
*/
|
||||||
|
|
||||||
typedef struct {
|
typedef struct {
|
||||||
u16 osys;
|
/* Miscellaneous */
|
||||||
u8 smif;
|
u16 osys; /* 0x00 - Operating System */
|
||||||
u8 prm0;
|
u8 smif; /* 0x02 - SMI function call ("TRAP") */
|
||||||
u8 prm1;
|
u8 prm0; /* 0x03 - SMI function call parameter */
|
||||||
u8 scif;
|
u8 prm1; /* 0x04 - SMI function call parameter */
|
||||||
u8 prm2;
|
u8 scif; /* 0x05 - SCI function call (via _L00) */
|
||||||
u8 prm3;
|
u8 prm2; /* 0x06 - SCI function call parameter */
|
||||||
u8 lckf;
|
u8 prm3; /* 0x07 - SCI function call parameter */
|
||||||
u8 prm4;
|
u8 lckf; /* 0x08 - Global Lock function for EC */
|
||||||
u8 prm5;
|
u8 prm4; /* 0x09 - Lock function parameter */
|
||||||
u32 p80d;
|
u8 prm5; /* 0x0a - Lock function parameter */
|
||||||
u8 lids;
|
u32 p80d; /* 0x0b - Debug port (IO 0x80) value */
|
||||||
u8 pwrs;
|
u8 lids; /* 0x0f - LID state (open = 1) */
|
||||||
u8 dbgs;
|
u8 pwrs; /* 0x10 - Power state (AC = 1) */
|
||||||
u8 linxs;
|
u8 dbgs; /* 0x11 - Debug state */
|
||||||
u8 rsvd;
|
u8 linx; /* 0x12 - Linux OS */
|
||||||
u8 actt;
|
u8 dckn; /* 0x13 - PCIe docking state */
|
||||||
u8 psvt;
|
/* Thermal policy */
|
||||||
u8 tc1v;
|
u8 actt; /* 0x14 - active trip point */
|
||||||
u8 tc2v;
|
u8 psvt; /* 0x15 - passive trip point */
|
||||||
u8 tspv;
|
u8 tc1v; /* 0x16 - passive trip point TC1 */
|
||||||
u8 crtt;
|
u8 tc2v; /* 0x17 - passive trip point TC2 */
|
||||||
u8 dtse;
|
u8 tspv; /* 0x18 - passive trip point TSP */
|
||||||
u8 dts1;
|
u8 crtt; /* 0x19 - critical trip point */
|
||||||
u8 dts2;
|
u8 dtse; /* 0x1a - Digital Thermal Sensor enable */
|
||||||
|
u8 dts1; /* 0x1b - DT sensor 1 */
|
||||||
|
u8 dts2; /* 0x1c - DT sensor 2 */
|
||||||
u8 rsvd2;
|
u8 rsvd2;
|
||||||
u8 bnum;
|
/* Battery Support */
|
||||||
u8 b0sc, b1sc, b2sc;
|
u8 bnum; /* 0x1e - number of batteries */
|
||||||
u8 b0ss, b1ss, b2ss;
|
u8 b0sc, b1sc, b2sc; /* 0x1f-0x21 - stored capacity */
|
||||||
|
u8 b0ss, b1ss, b2ss; /* 0x22-0x24 - stored status */
|
||||||
u8 rsvd3[3];
|
u8 rsvd3[3];
|
||||||
u8 apic;
|
/* Processor Identification */
|
||||||
u8 mpen;
|
u8 apic; /* 0x28 - APIC enabled */
|
||||||
u8 bten;
|
u8 mpen; /* 0x29 - MP capable/enabled */
|
||||||
u8 ppcm;
|
u8 pcp0; /* 0x2a - PDC CPU/CORE 0 */
|
||||||
u8 pcp0;
|
u8 pcp1; /* 0x2b - PDC CPU/CORE 1 */
|
||||||
u8 pcp1;
|
u8 ppcm; /* 0x2c - Max. PPC state */
|
||||||
u8 rsvd4[4];
|
u8 rsvd4[5];
|
||||||
u8 natp;
|
/* Super I/O & CMOS config */
|
||||||
|
u8 natp; /* 0x32 - SIO type */
|
||||||
u8 cmap;
|
u8 cmap;
|
||||||
u8 cmbp;
|
u8 cmbp;
|
||||||
u8 lptp;
|
u8 lptp;
|
||||||
|
|
@ -67,42 +71,69 @@ typedef struct {
|
||||||
u8 rtcf;
|
u8 rtcf;
|
||||||
u8 util;
|
u8 util;
|
||||||
u8 acin;
|
u8 acin;
|
||||||
u8 igds;
|
/* Integrated Graphics Device */
|
||||||
u8 tlst;
|
u8 igds; /* 0x3c - IGD state */
|
||||||
u8 cadl;
|
u8 tlst; /* 0x3d - Display Toggle List Pointer */
|
||||||
u8 padl;
|
u8 cadl; /* 0x3e - currently attached devices */
|
||||||
u16 cste;
|
u8 padl; /* 0x3f - previously attached devices */
|
||||||
u16 pste;
|
u16 cste; /* 0x40 - current display state */
|
||||||
u16 nste;
|
u16 nste; /* 0x42 - next display state */
|
||||||
u16 sste;
|
u16 sste; /* 0x44 - set display state */
|
||||||
u8 ndid;
|
u8 ndid; /* 0x46 - number of device ids */
|
||||||
u32 did1;
|
u32 did[5]; /* 0x47 - 5b device id 1..5 */
|
||||||
u32 did2;
|
u8 rsvd5[0x9];
|
||||||
u32 did3;
|
/* Backlight Control */
|
||||||
u32 did4;
|
u8 blcs; /* 0x64 - Backlight Control possible */
|
||||||
u32 did5;
|
|
||||||
u8 rsvd5[0xb];
|
|
||||||
u8 brtl;
|
u8 brtl;
|
||||||
u8 odds;
|
u8 odds;
|
||||||
u8 alse;
|
u8 rsvd6[0x7];
|
||||||
|
/* Ambient Light Sensors*/
|
||||||
|
u8 alse; /* 0x6e - ALS enable */
|
||||||
u8 alaf;
|
u8 alaf;
|
||||||
u8 llow;
|
u8 llow;
|
||||||
u8 lhih;
|
u8 lhih;
|
||||||
u8 rsvd6;
|
u8 rsvd7[0x6];
|
||||||
u8 emae;
|
/* EMA */
|
||||||
|
u8 emae; /* 0x78 - EMA enable */
|
||||||
u16 emap;
|
u16 emap;
|
||||||
u16 emal;
|
u16 emal;
|
||||||
u8 rsvd7;
|
u8 rsvd8[0x5];
|
||||||
u8 mefe;
|
/* MEF */
|
||||||
u8 igps;
|
u8 mefe; /* 0x82 - MEF enable */
|
||||||
u8 rsvd8[2];
|
u8 rsvd9[0x9];
|
||||||
u8 tpmp;
|
/* TPM support */
|
||||||
|
u8 tpmp; /* 0x8c - TPM */
|
||||||
u8 tpme;
|
u8 tpme;
|
||||||
u8 rsvd9[8];
|
u8 rsvd10[8];
|
||||||
u8 gtf0[7];
|
/* SATA */
|
||||||
|
u8 gtf0[7]; /* 0x96 - GTF task file buffer for port 0 */
|
||||||
|
u8 gtf1[7];
|
||||||
u8 gtf2[7];
|
u8 gtf2[7];
|
||||||
u8 idem;
|
u8 idem;
|
||||||
u8 idet;
|
u8 idet;
|
||||||
u8 dock;
|
u8 rsvd11[7];
|
||||||
} global_nvs_t;
|
/* IGD OpRegion (not implemented yet) */
|
||||||
|
u32 aslb; /* 0xb4 - IGD OpRegion Base Address */
|
||||||
|
u8 ibtt;
|
||||||
|
u8 ipat;
|
||||||
|
u8 itvf;
|
||||||
|
u8 itvm;
|
||||||
|
u8 ipsc;
|
||||||
|
u8 iblc;
|
||||||
|
u8 ibia;
|
||||||
|
u8 issc;
|
||||||
|
u8 i409;
|
||||||
|
u8 i509;
|
||||||
|
u8 i609;
|
||||||
|
u8 i709;
|
||||||
|
u8 idmm;
|
||||||
|
u8 idms;
|
||||||
|
u8 if1e;
|
||||||
|
u8 hvco;
|
||||||
|
u32 nxd[8];
|
||||||
|
u8 rsvd12[8];
|
||||||
|
/* Mainboard specific */
|
||||||
|
u8 dock; /* 0xf0 - Docking Status */
|
||||||
|
u8 rsvd13[15];
|
||||||
|
} __attribute__((packed)) global_nvs_t;
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -81,7 +81,7 @@ static void ich_pci_dev_enable_resources(struct device *dev)
|
||||||
|
|
||||||
command = pci_read_config16(dev, PCI_COMMAND);
|
command = pci_read_config16(dev, PCI_COMMAND);
|
||||||
command |= dev->command;
|
command |= dev->command;
|
||||||
#if PCI_BRIDGE_UPDATE_COMMAND
|
#ifdef PCI_BRIDGE_UPDATE_COMMAND
|
||||||
/* If we write to PCI_COMMAND, on some systems
|
/* If we write to PCI_COMMAND, on some systems
|
||||||
* this will cause the ROM and APICs not being visible
|
* this will cause the ROM and APICs not being visible
|
||||||
* anymore.
|
* anymore.
|
||||||
|
|
|
||||||
|
|
@ -0,0 +1,29 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the coreboot project.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2009 coresystems GmbH
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or
|
||||||
|
* modify it under the terms of the GNU General Public License as
|
||||||
|
* published by the Free Software Foundation; version 2 of
|
||||||
|
* the License.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program; if not, write to the Free Software
|
||||||
|
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
|
||||||
|
* MA 02110-1301 USA
|
||||||
|
*/
|
||||||
|
|
||||||
|
#define MAINBOARD_POWER_OFF 0
|
||||||
|
#define MAINBOARD_POWER_ON 1
|
||||||
|
#define MAINBOARD_POWER_KEEP 2
|
||||||
|
|
||||||
|
#ifndef MAINBOARD_POWER_ON_AFTER_FAIL
|
||||||
|
#define MAINBOARD_POWER_ON_AFTER_FAIL MAINBOARD_POWER_ON
|
||||||
|
#endif
|
||||||
|
|
||||||
|
|
@ -35,8 +35,10 @@ static void sata_init(struct device *dev)
|
||||||
|
|
||||||
printk_debug("i82801gx_sata: initializing...\n");
|
printk_debug("i82801gx_sata: initializing...\n");
|
||||||
|
|
||||||
if (config == NULL)
|
if (config == NULL) {
|
||||||
printk_err("i82801gx_sata: error: device not in Config.lb!\n");
|
printk_err("i82801gx_sata: error: device not in Config.lb!\n");
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
|
||||||
/* SATA configuration */
|
/* SATA configuration */
|
||||||
|
|
||||||
|
|
@ -55,12 +57,15 @@ static void sata_init(struct device *dev)
|
||||||
pci_write_config8(dev, 0x09, 0x80);
|
pci_write_config8(dev, 0x09, 0x80);
|
||||||
|
|
||||||
/* Set timings */
|
/* Set timings */
|
||||||
pci_write_config16(dev, IDE_TIM_PRI, 0x8000);
|
pci_write_config16(dev, IDE_TIM_PRI, IDE_DECODE_ENABLE |
|
||||||
pci_write_config16(dev, IDE_TIM_SEC, 0xa307);
|
IDE_ISP_5_CLOCKS | IDE_RCT_4_CLOCKS);
|
||||||
|
pci_write_config16(dev, IDE_TIM_SEC, IDE_DECODE_ENABLE |
|
||||||
|
IDE_ISP_3_CLOCKS | IDE_RCT_1_CLOCKS |
|
||||||
|
IDE_PPE0 | IDE_IE0 | IDE_TIME0);
|
||||||
|
|
||||||
/* Sync DMA */
|
/* Sync DMA */
|
||||||
pci_write_config16(dev, 0x48, 0x0004);
|
pci_write_config16(dev, IDE_SDMA_CNT, IDE_SSDE0);
|
||||||
pci_write_config16(dev, 0x4a, 0x0200);
|
pci_write_config16(dev, IDE_SDMA_TIM, 0x0200);
|
||||||
|
|
||||||
/* Set IDE I/O Configuration */
|
/* Set IDE I/O Configuration */
|
||||||
reg32 = SIG_MODE_NORMAL | FAST_PCB1 | FAST_PCB0 | PCB1 | PCB0;
|
reg32 = SIG_MODE_NORMAL | FAST_PCB1 | FAST_PCB0 | PCB1 | PCB0;
|
||||||
|
|
@ -84,12 +89,15 @@ static void sata_init(struct device *dev)
|
||||||
pci_write_config8(dev, INTR_LN, 0x0a);
|
pci_write_config8(dev, INTR_LN, 0x0a);
|
||||||
|
|
||||||
/* Set timings */
|
/* Set timings */
|
||||||
pci_write_config16(dev, IDE_TIM_PRI, 0xa307);
|
pci_write_config16(dev, IDE_TIM_PRI, IDE_DECODE_ENABLE |
|
||||||
pci_write_config16(dev, IDE_TIM_SEC, 0x8000);
|
IDE_ISP_3_CLOCKS | IDE_RCT_1_CLOCKS |
|
||||||
|
IDE_PPE0 | IDE_IE0 | IDE_TIME0);
|
||||||
|
pci_write_config16(dev, IDE_TIM_SEC, IDE_DECODE_ENABLE |
|
||||||
|
IDE_ISP_5_CLOCKS | IDE_RCT_4_CLOCKS);
|
||||||
|
|
||||||
/* Sync DMA */
|
/* Sync DMA */
|
||||||
pci_write_config16(dev, 0x48, 0x0001);
|
pci_write_config16(dev, IDE_SDMA_CNT, IDE_PSDE0);
|
||||||
pci_write_config16(dev, 0x4a, 0x0001);
|
pci_write_config16(dev, IDE_SDMA_TIM, 0x0001);
|
||||||
|
|
||||||
/* Set IDE I/O Configuration */
|
/* Set IDE I/O Configuration */
|
||||||
reg32 = SIG_MODE_NORMAL | FAST_PCB1 | FAST_PCB0 | PCB1 | PCB0;
|
reg32 = SIG_MODE_NORMAL | FAST_PCB1 | FAST_PCB0 | PCB1 | PCB0;
|
||||||
|
|
@ -126,12 +134,16 @@ static void sata_init(struct device *dev)
|
||||||
pci_write_config8(dev, INTR_LN, 0xff);
|
pci_write_config8(dev, INTR_LN, 0xff);
|
||||||
|
|
||||||
/* Set timings */
|
/* Set timings */
|
||||||
pci_write_config16(dev, IDE_TIM_PRI, 0xa307);
|
pci_write_config16(dev, IDE_TIM_PRI, IDE_DECODE_ENABLE |
|
||||||
pci_write_config16(dev, IDE_TIM_SEC, 0xe303);
|
IDE_ISP_3_CLOCKS | IDE_RCT_1_CLOCKS |
|
||||||
|
IDE_PPE0 | IDE_IE0 | IDE_TIME0);
|
||||||
|
pci_write_config16(dev, IDE_TIM_SEC, IDE_DECODE_ENABLE |
|
||||||
|
IDE_SITRE | IDE_ISP_3_CLOCKS |
|
||||||
|
IDE_RCT_1_CLOCKS | IDE_IE0 | IDE_TIME0);
|
||||||
|
|
||||||
/* Sync DMA */
|
/* Sync DMA */
|
||||||
pci_write_config16(dev, 0x48, 0x0005);
|
pci_write_config16(dev, IDE_SDMA_CNT, IDE_SSDE0 | IDE_PSDE0);
|
||||||
pci_write_config16(dev, 0x4a, 0x0201);
|
pci_write_config16(dev, IDE_SDMA_TIM, 0x0201);
|
||||||
|
|
||||||
/* Set IDE I/O Configuration */
|
/* Set IDE I/O Configuration */
|
||||||
reg32 = SIG_MODE_NORMAL | FAST_PCB1 | FAST_PCB0 | PCB1 | PCB0;
|
reg32 = SIG_MODE_NORMAL | FAST_PCB1 | FAST_PCB0 | PCB1 | PCB0;
|
||||||
|
|
|
||||||
|
|
@ -29,6 +29,19 @@
|
||||||
#include "i82801gx.h"
|
#include "i82801gx.h"
|
||||||
#include "i82801gx_smbus.h"
|
#include "i82801gx_smbus.h"
|
||||||
|
|
||||||
|
#define SMB_BASE 0x20
|
||||||
|
static void smbus_init(struct device *dev)
|
||||||
|
{
|
||||||
|
u32 smb_base;
|
||||||
|
|
||||||
|
smb_base = pci_read_config32(dev, SMB_BASE);
|
||||||
|
printk_debug("Initializing SMBus device:\n");
|
||||||
|
printk_debug(" Old SMBUS Base Address: 0x%04x\n", smb_base);
|
||||||
|
pci_write_config32(dev, SMB_BASE, 0x00000401);
|
||||||
|
smb_base = pci_read_config32(dev, SMB_BASE);
|
||||||
|
printk_debug(" New SMBUS Base Address: 0x%04x\n", smb_base);
|
||||||
|
}
|
||||||
|
|
||||||
static int lsmbus_read_byte(device_t dev, u8 address)
|
static int lsmbus_read_byte(device_t dev, u8 address)
|
||||||
{
|
{
|
||||||
u16 device;
|
u16 device;
|
||||||
|
|
@ -65,7 +78,7 @@ static struct device_operations smbus_ops = {
|
||||||
.read_resources = pci_dev_read_resources,
|
.read_resources = pci_dev_read_resources,
|
||||||
.set_resources = pci_dev_set_resources,
|
.set_resources = pci_dev_set_resources,
|
||||||
.enable_resources = pci_dev_enable_resources,
|
.enable_resources = pci_dev_enable_resources,
|
||||||
.init = 0,
|
.init = smbus_init,
|
||||||
.scan_bus = scan_static_bus,
|
.scan_bus = scan_static_bus,
|
||||||
.enable = i82801gx_enable,
|
.enable = i82801gx_enable,
|
||||||
.ops_smbus_bus = &lops_smbus_bus,
|
.ops_smbus_bus = &lops_smbus_bus,
|
||||||
|
|
|
||||||
|
|
@ -27,10 +27,7 @@
|
||||||
#include <cpu/x86/cache.h>
|
#include <cpu/x86/cache.h>
|
||||||
#include <cpu/x86/smm.h>
|
#include <cpu/x86/smm.h>
|
||||||
#include <string.h>
|
#include <string.h>
|
||||||
#include "chip.h"
|
#include "i82801gx.h"
|
||||||
|
|
||||||
// Future TODO: Move to i82801gx directory
|
|
||||||
#include "../../../northbridge/intel/i945/ich7.h"
|
|
||||||
|
|
||||||
extern unsigned char smm[];
|
extern unsigned char smm[];
|
||||||
extern unsigned int smm_len;
|
extern unsigned int smm_len;
|
||||||
|
|
@ -318,8 +315,12 @@ void smm_install(void)
|
||||||
|
|
||||||
void smm_init(void)
|
void smm_init(void)
|
||||||
{
|
{
|
||||||
|
// FIXME is this a race condition?
|
||||||
smm_relocate();
|
smm_relocate();
|
||||||
smm_install();
|
smm_install();
|
||||||
|
|
||||||
|
// We're done. Make sure SMIs can happen!
|
||||||
|
smi_set_eos();
|
||||||
}
|
}
|
||||||
|
|
||||||
void smm_lock(void)
|
void smm_lock(void)
|
||||||
|
|
@ -333,3 +334,13 @@ void smm_lock(void)
|
||||||
D_LCK | G_SMRAME | C_BASE_SEG);
|
D_LCK | G_SMRAME | C_BASE_SEG);
|
||||||
}
|
}
|
||||||
|
|
||||||
|
void smm_setup_structures(void *gnvs, void *tcg, void *smi1)
|
||||||
|
{
|
||||||
|
/* The GDT or coreboot table is going to live here. But a long time
|
||||||
|
* after we relocated the GNVS, so this is not troublesome.
|
||||||
|
*/
|
||||||
|
*(u32 *)0x500 = (u32)gnvs;
|
||||||
|
*(u32 *)0x504 = (u32)tcg;
|
||||||
|
*(u32 *)0x508 = (u32)smi1;
|
||||||
|
outb(0xea, 0xb2);
|
||||||
|
}
|
||||||
|
|
|
||||||
|
|
@ -19,22 +19,24 @@
|
||||||
* MA 02110-1301 USA
|
* MA 02110-1301 USA
|
||||||
*/
|
*/
|
||||||
|
|
||||||
|
#include <types.h>
|
||||||
#include <arch/io.h>
|
#include <arch/io.h>
|
||||||
#include <arch/romcc_io.h>
|
#include <arch/romcc_io.h>
|
||||||
#include <console/console.h>
|
#include <console/console.h>
|
||||||
#include <cpu/x86/cache.h>
|
#include <cpu/x86/cache.h>
|
||||||
#include <cpu/x86/smm.h>
|
#include <cpu/x86/smm.h>
|
||||||
//#include "chip.h"
|
#include "i82801gx.h"
|
||||||
|
#include "i82801gx_power.h"
|
||||||
// Future TODO: Move to i82801gx directory
|
|
||||||
#include "../../../northbridge/intel/i945/ich7.h"
|
|
||||||
|
|
||||||
#define DEBUG_SMI
|
#define DEBUG_SMI
|
||||||
|
|
||||||
#define APM_CNT 0xb2
|
#define APM_CNT 0xb2
|
||||||
#define APM_STS 0xb3
|
#define CST_CONTROL 0x85 // 0x85 crashes the box
|
||||||
|
#define PST_CONTROL 0x80 // 0x80 crashes the box
|
||||||
#define ACPI_DISABLE 0x1e
|
#define ACPI_DISABLE 0x1e
|
||||||
#define ACPI_ENABLE 0xe1
|
#define ACPI_ENABLE 0xe1
|
||||||
|
#define GNVS_UPDATE 0xea
|
||||||
|
#define APM_STS 0xb3
|
||||||
|
|
||||||
/* I945 */
|
/* I945 */
|
||||||
#define SMRAM 0x9d
|
#define SMRAM 0x9d
|
||||||
|
|
@ -48,6 +50,11 @@
|
||||||
#define PM1_STS 0x00
|
#define PM1_STS 0x00
|
||||||
#define PM1_EN 0x02
|
#define PM1_EN 0x02
|
||||||
#define PM1_CNT 0x04
|
#define PM1_CNT 0x04
|
||||||
|
#define SLP_EN (1 << 13)
|
||||||
|
#define SLP_TYP (7 << 10)
|
||||||
|
#define GBL_RLS (1 << 2)
|
||||||
|
#define BM_RLD (1 << 1)
|
||||||
|
#define SCI_EN (1 << 0)
|
||||||
#define PM1_TMR 0x08
|
#define PM1_TMR 0x08
|
||||||
#define PROC_CNT 0x10
|
#define PROC_CNT 0x10
|
||||||
#define LV2 0x14
|
#define LV2 0x14
|
||||||
|
|
@ -56,6 +63,7 @@
|
||||||
#define PM2_CNT 0x20 // mobile only
|
#define PM2_CNT 0x20 // mobile only
|
||||||
#define GPE0_STS 0x28
|
#define GPE0_STS 0x28
|
||||||
#define GPE0_EN 0x2c
|
#define GPE0_EN 0x2c
|
||||||
|
#define PME_B0_EN (1 << 13)
|
||||||
#define SMI_EN 0x30
|
#define SMI_EN 0x30
|
||||||
#define EL_SMI_EN (1 << 25) // Intel Quick Resume Technology
|
#define EL_SMI_EN (1 << 25) // Intel Quick Resume Technology
|
||||||
#define INTEL_USB2_EN (1 << 18) // Intel-Specific USB2 SMI logic
|
#define INTEL_USB2_EN (1 << 18) // Intel-Specific USB2 SMI logic
|
||||||
|
|
@ -84,7 +92,14 @@
|
||||||
/* While we read PMBASE dynamically in case it changed, let's
|
/* While we read PMBASE dynamically in case it changed, let's
|
||||||
* initialize it with a sane value
|
* initialize it with a sane value
|
||||||
*/
|
*/
|
||||||
static u16 pmbase = DEFAULT_PMBASE;
|
u16 pmbase = DEFAULT_PMBASE;
|
||||||
|
|
||||||
|
/* GNVS needs to be updated by an 0xEA PM Trap (B2) after it has been located
|
||||||
|
* by coreboot.
|
||||||
|
*/
|
||||||
|
global_nvs_t *gnvs = (global_nvs_t *)0x0;
|
||||||
|
void *tcg = (void *)0x0;
|
||||||
|
void *smi1 = (void *)0x0;
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* @brief read and clear PM1_STS
|
* @brief read and clear PM1_STS
|
||||||
|
|
@ -235,7 +250,6 @@ static void dump_tco_status(u32 tco_sts)
|
||||||
printk_debug("\n");
|
printk_debug("\n");
|
||||||
}
|
}
|
||||||
|
|
||||||
|
|
||||||
/* We are using PCIe accesses for now
|
/* We are using PCIe accesses for now
|
||||||
* 1. the chipset can do it
|
* 1. the chipset can do it
|
||||||
* 2. we don't need to worry about how we leave 0xcf8/0xcfc behind
|
* 2. we don't need to worry about how we leave 0xcf8/0xcfc behind
|
||||||
|
|
@ -244,12 +258,10 @@ static void dump_tco_status(u32 tco_sts)
|
||||||
|
|
||||||
int southbridge_io_trap_handler(int smif)
|
int southbridge_io_trap_handler(int smif)
|
||||||
{
|
{
|
||||||
global_nvs_t *gnvs = (global_nvs_t *)0xc00;
|
|
||||||
|
|
||||||
switch (smif) {
|
switch (smif) {
|
||||||
case 0x32:
|
case 0x32:
|
||||||
printk_debug("OS Init\n");
|
printk_debug("OS Init\n");
|
||||||
//gnvs->smif = 0;
|
gnvs->smif = 0;
|
||||||
break;
|
break;
|
||||||
default:
|
default:
|
||||||
/* Not handled */
|
/* Not handled */
|
||||||
|
|
@ -278,67 +290,166 @@ void southbridge_smi_set_eos(void)
|
||||||
outb(reg8, pmbase + SMI_EN);
|
outb(reg8, pmbase + SMI_EN);
|
||||||
}
|
}
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Interrupt handler for SMI#
|
|
||||||
*
|
|
||||||
* @param smm_revision revision of the smm state save map
|
|
||||||
*/
|
|
||||||
|
|
||||||
void southbridge_smi_handler(unsigned int node, smm_state_save_area_t *state_save)
|
static void southbridge_smi_sleep(unsigned int node, smm_state_save_area_t *state_save)
|
||||||
{
|
{
|
||||||
u8 reg8;
|
u8 reg8;
|
||||||
u16 pmctrl;
|
u32 reg32;
|
||||||
u16 pm1_sts;
|
u8 slp_typ;
|
||||||
u32 smi_sts, gpe0_sts, tco_sts;
|
/* FIXME: the power state on boot should be read from
|
||||||
|
* CMOS or even better from GNVS. Right now it's hard
|
||||||
pmbase = pcie_read_config16(PCI_DEV(0, 0x1f, 0), 0x40) & 0xfffc;
|
* coded at compile time.
|
||||||
printk_spew("SMI#: pmbase = 0x%04x\n", pmbase);
|
|
||||||
|
|
||||||
/* We need to clear the SMI status registers, or we won't see what's
|
|
||||||
* happening in the following calls.
|
|
||||||
*/
|
*/
|
||||||
smi_sts = reset_smi_status();
|
u8 s5pwr = MAINBOARD_POWER_ON_AFTER_FAIL;
|
||||||
dump_smi_status(smi_sts);
|
|
||||||
|
|
||||||
if (smi_sts & (1 << 21)) { // MONITOR
|
/* First, disable further SMIs */
|
||||||
global_nvs_t *gnvs = (global_nvs_t *)0xc00;
|
reg8 = inb(pmbase + SMI_EN);
|
||||||
int i;
|
reg8 &= ~SLP_SMI_EN;
|
||||||
|
outb(reg8, pmbase + SMI_EN);
|
||||||
|
|
||||||
|
/* Figure out SLP_TYP */
|
||||||
|
reg32 = inl(pmbase + PM1_CNT);
|
||||||
|
printk_spew("SMI#: SLP = 0x%08x\n", reg32);
|
||||||
|
slp_typ = (reg32 >> 10) & 7;
|
||||||
|
|
||||||
|
/* Next, do the deed.
|
||||||
|
*/
|
||||||
|
|
||||||
|
switch (slp_typ) {
|
||||||
|
case 0: printk_debug("SMI#: Entering S0 (On)\n"); break;
|
||||||
|
case 1: printk_debug("SMI#: Entering S1 (Assert STPCLK#)\n"); break;
|
||||||
|
case 5:
|
||||||
|
printk_debug("SMI#: Entering S3 (Suspend-To-RAM)\n");
|
||||||
|
/* Invalidate the cache before going to S3 */
|
||||||
|
wbinvd();
|
||||||
|
break;
|
||||||
|
case 6: printk_debug("SMI#: Entering S4 (Suspend-To-Disk)\n"); break;
|
||||||
|
case 7:
|
||||||
|
printk_debug("SMI#: Entering S5 (Soft Power off)\n");
|
||||||
|
#if 0
|
||||||
|
/* Set PME_B0_EN before going to S5 */
|
||||||
|
reg32 = inl(pmbase + GPE0_EN);
|
||||||
|
reg32 |= PME_B0_EN;
|
||||||
|
outl(reg32, pmbase + GPE0_EN);
|
||||||
|
#endif
|
||||||
|
/* Should we keep the power state after a power loss?
|
||||||
|
* In case the setting is "ON" or "OFF" we don't have
|
||||||
|
* to do anything. But if it's "KEEP" we have to switch
|
||||||
|
* to "OFF" before entering S5.
|
||||||
|
*/
|
||||||
|
if (s5pwr == MAINBOARD_POWER_KEEP) {
|
||||||
|
reg8 = pcie_read_config8(PCI_DEV(0, 0x1f, 0), GEN_PMCON_3);
|
||||||
|
reg8 |= 1;
|
||||||
|
pcie_write_config8(PCI_DEV(0, 0x1f, 0), GEN_PMCON_3, reg8);
|
||||||
|
}
|
||||||
|
break;
|
||||||
|
default: printk_debug("SMI#: ERROR: SLP_TYP reserved\n"); break;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Write back to the SLP register to cause the originally intended
|
||||||
|
* event again. We need to set BIT13 (SLP_EN) though to make the
|
||||||
|
* sleep happen.
|
||||||
|
*/
|
||||||
|
outl(reg32 | SLP_EN, pmbase + PM1_CNT);
|
||||||
|
|
||||||
|
/* In most sleep states, the code flow of this function ends at
|
||||||
|
* the line above. However, if we entered sleep state S1 and wake
|
||||||
|
* up again, we will continue to execute code in this function.
|
||||||
|
*/
|
||||||
|
reg32 = inl(pmbase + PM1_CNT);
|
||||||
|
if (reg32 & SCI_EN) {
|
||||||
|
/* The OS is not an ACPI OS, so we set the state to S0 */
|
||||||
|
reg32 &= ~(SLP_EN | SLP_TYP);
|
||||||
|
outl(reg32, pmbase + PM1_CNT);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
static void southbridge_smi_apmc(unsigned int node, smm_state_save_area_t *state_save)
|
||||||
|
{
|
||||||
|
u32 pmctrl;
|
||||||
|
u8 reg8;
|
||||||
|
|
||||||
|
/* Emulate B2 register as the FADT / Linux expects it */
|
||||||
|
|
||||||
|
reg8 = inb(APM_CNT);
|
||||||
|
switch (reg8) {
|
||||||
|
case CST_CONTROL:
|
||||||
|
/* Calling this function seems to cause
|
||||||
|
* some kind of race condition in Linux
|
||||||
|
* and causes a kernel oops
|
||||||
|
*/
|
||||||
|
printk_debug("C-state control\n");
|
||||||
|
break;
|
||||||
|
case PST_CONTROL:
|
||||||
|
/* Calling this function seems to cause
|
||||||
|
* some kind of race condition in Linux
|
||||||
|
* and causes a kernel oops
|
||||||
|
*/
|
||||||
|
printk_debug("P-state control\n");
|
||||||
|
break;
|
||||||
|
case ACPI_DISABLE:
|
||||||
|
pmctrl = inl(pmbase + PM1_CNT);
|
||||||
|
pmctrl &= ~SCI_EN;
|
||||||
|
outl(pmctrl, pmbase + PM1_CNT);
|
||||||
|
printk_debug("SMI#: ACPI disabled.\n");
|
||||||
|
break;
|
||||||
|
case ACPI_ENABLE:
|
||||||
|
pmctrl = inl(pmbase + PM1_CNT);
|
||||||
|
pmctrl |= SCI_EN;
|
||||||
|
outl(pmctrl, pmbase + PM1_CNT);
|
||||||
|
printk_debug("SMI#: ACPI enabled.\n");
|
||||||
|
break;
|
||||||
|
case GNVS_UPDATE:
|
||||||
|
gnvs = *(global_nvs_t **)0x500;
|
||||||
|
tcg = *(void **)0x504;
|
||||||
|
smi1 = *(void **)0x508;
|
||||||
|
printk_debug("SMI#: Setting up structures to %p, %p, %p\n", gnvs, tcg, smi1);
|
||||||
|
break;
|
||||||
|
default:
|
||||||
|
printk_debug("SMI#: Unknown function APM_CNT=%02x\n", reg8);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
static void southbridge_smi_pm1(unsigned int node, smm_state_save_area_t *state_save)
|
||||||
|
{
|
||||||
|
u16 pm1_sts;
|
||||||
|
|
||||||
|
pm1_sts = reset_pm1_status();
|
||||||
|
dump_pm1_status(pm1_sts);
|
||||||
|
}
|
||||||
|
|
||||||
|
static void southbridge_smi_gpe0(unsigned int node, smm_state_save_area_t *state_save)
|
||||||
|
{
|
||||||
|
u32 gpe0_sts;
|
||||||
|
|
||||||
|
gpe0_sts = reset_gpe0_status();
|
||||||
|
dump_gpe0_status(gpe0_sts);
|
||||||
|
}
|
||||||
|
|
||||||
|
static void southbridge_smi_mc(unsigned int node, smm_state_save_area_t *state_save)
|
||||||
|
{
|
||||||
u32 reg32;
|
u32 reg32;
|
||||||
|
|
||||||
reg32 = RCBA32(0x1e00); // TRSR - Trap Status Register
|
reg32 = inl(pmbase + SMI_EN);
|
||||||
#if 0
|
|
||||||
/* Comment in for some useful debug */
|
|
||||||
for (i=0; i<4; i++) {
|
|
||||||
if (reg32 & (1 << i)) {
|
|
||||||
printk_debug(" io trap #%d\n", i);
|
|
||||||
}
|
|
||||||
}
|
|
||||||
#endif
|
|
||||||
RCBA32(0x1e00) = reg32; // TRSR
|
|
||||||
|
|
||||||
reg32 = RCBA32(0x1e10);
|
/* Are periodic SMIs enabled? */
|
||||||
|
if ((reg32 & MCSMI_EN) == 0)
|
||||||
|
return;
|
||||||
|
|
||||||
if ((reg32 & 0xfffc) != 0x808) {
|
printk_debug("Microcontroller SMI.\n");
|
||||||
printk_debug(" trapped io address = 0x%x\n", reg32 & 0xfffc);
|
}
|
||||||
printk_debug(" AHBE = %x\n", (reg32 >> 16) & 0xf);
|
|
||||||
printk_debug(" read/write: %s\n", (reg32 & (1 << 24)) ? "read" :
|
|
||||||
"write");
|
|
||||||
}
|
|
||||||
|
|
||||||
if (!(reg32 & (1 << 24))) {
|
|
||||||
/* Write Cycle */
|
|
||||||
reg32 = RCBA32(0x1e18);
|
|
||||||
printk_debug(" iotrap written data = 0x%08x\n", reg32);
|
|
||||||
|
|
||||||
}
|
|
||||||
|
|
||||||
if (gnvs->smif)
|
static void southbridge_smi_tco(unsigned int node, smm_state_save_area_t *state_save)
|
||||||
io_trap_handler(gnvs->smif); // call function smif
|
{
|
||||||
}
|
u32 tco_sts;
|
||||||
|
|
||||||
if (smi_sts & (1 << 13)) { // TCO
|
|
||||||
tco_sts = reset_tco_status();
|
tco_sts = reset_tco_status();
|
||||||
dump_tco_status(tco_sts);
|
|
||||||
|
/* Any TCO event? */
|
||||||
|
if (!tco_sts)
|
||||||
|
return;
|
||||||
|
|
||||||
if (tco_sts & (1 << 8)) { // BIOSWR
|
if (tco_sts & (1 << 8)) { // BIOSWR
|
||||||
u8 bios_cntl;
|
u8 bios_cntl;
|
||||||
|
|
@ -359,60 +470,157 @@ void southbridge_smi_handler(unsigned int node, smm_state_save_area_t *state_sav
|
||||||
printk_debug("Switching back to RO\n");
|
printk_debug("Switching back to RO\n");
|
||||||
pcie_write_config32(PCI_DEV(0, 0x1f, 0), 0xdc, (bios_cntl & ~1));
|
pcie_write_config32(PCI_DEV(0, 0x1f, 0), 0xdc, (bios_cntl & ~1));
|
||||||
} /* No else for now? */
|
} /* No else for now? */
|
||||||
|
} else if (tco_sts & (1 << 3)) { /* TIMEOUT */
|
||||||
|
/* Handle TCO timeout */
|
||||||
|
printk_debug("TCO Timeout.\n");
|
||||||
|
} else if (!tco_sts) {
|
||||||
|
dump_tco_status(tco_sts);
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
|
|
||||||
if (smi_sts & (1 << 8)) { // PM1
|
static void southbridge_smi_periodic(unsigned int node, smm_state_save_area_t *state_save)
|
||||||
pm1_sts = reset_pm1_status();
|
{
|
||||||
dump_pm1_status(pm1_sts);
|
|
||||||
}
|
|
||||||
|
|
||||||
if (smi_sts & (1 << 9)) { // GPE0
|
|
||||||
gpe0_sts = reset_gpe0_status();
|
|
||||||
dump_gpe0_status(gpe0_sts);
|
|
||||||
}
|
|
||||||
|
|
||||||
if (smi_sts & (1 << 5)) { // APM
|
|
||||||
/* Emulate B2 register as the FADT / Linux expects it */
|
|
||||||
|
|
||||||
reg8 = inb(0xb2);
|
|
||||||
switch (reg8) {
|
|
||||||
case ACPI_DISABLE:
|
|
||||||
pmctrl = inw(pmbase + 0x04);
|
|
||||||
pmctrl |= (1 << 0);
|
|
||||||
outw(pmctrl, pmbase + 0x04);
|
|
||||||
printk_debug("SMI#: ACPI disabled.\n");
|
|
||||||
break;
|
|
||||||
case ACPI_ENABLE:
|
|
||||||
pmctrl = inw(pmbase + 0x04);
|
|
||||||
pmctrl &= ~(1 << 0);
|
|
||||||
outw(pmctrl, pmbase + 0x04);
|
|
||||||
printk_debug("SMI#: ACPI enabled.\n");
|
|
||||||
break;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
if (smi_sts & (1 << 4)) { // SLP_SMI
|
|
||||||
u32 reg32;
|
u32 reg32;
|
||||||
|
|
||||||
/* First, disable further SMIs */
|
reg32 = inl(pmbase + SMI_EN);
|
||||||
reg8 = inb(pmbase + SMI_EN);
|
|
||||||
reg8 &= ~SLP_SMI_EN;
|
|
||||||
outb(reg8, pmbase + SMI_EN);
|
|
||||||
|
|
||||||
/* Next, do the deed, we should change
|
/* Are periodic SMIs enabled? */
|
||||||
* power on after power loss bits here
|
if ((reg32 & PERIODIC_EN) == 0)
|
||||||
* if we're going to S5
|
return;
|
||||||
|
|
||||||
|
printk_debug("Periodic SMI.\n");
|
||||||
|
}
|
||||||
|
|
||||||
|
static void southbridge_smi_monitor(unsigned int node, smm_state_save_area_t *state_save)
|
||||||
|
{
|
||||||
|
#define IOTRAP(x) (trap_sts & (1 << x))
|
||||||
|
u32 trap_sts, trap_cycle;
|
||||||
|
u32 data, mask = 0;
|
||||||
|
int i;
|
||||||
|
|
||||||
|
trap_sts = RCBA32(0x1e00); // TRSR - Trap Status Register
|
||||||
|
RCBA32(0x1e00) = trap_sts; // Clear trap(s) in TRSR
|
||||||
|
|
||||||
|
trap_cycle = RCBA32(0x1e10);
|
||||||
|
for (i=16; i<20; i++) {
|
||||||
|
if (trap_cycle & (1 << i))
|
||||||
|
mask |= (0xff << ((i - 16) << 2));
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
/* IOTRAP(3) SMI function call */
|
||||||
|
if (IOTRAP(3)) {
|
||||||
|
if (gnvs && gnvs->smif)
|
||||||
|
io_trap_handler(gnvs->smif); // call function smif
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* IOTRAP(2) currently unused
|
||||||
|
* IOTRAP(1) currently unused */
|
||||||
|
|
||||||
|
/* IOTRAP(0) SMIC */
|
||||||
|
if (IOTRAP(0)) {
|
||||||
|
if (!(trap_cycle & (1 << 24))) { // It's a write
|
||||||
|
printk_debug("SMI1 command\n");
|
||||||
|
data = RCBA32(0x1e18);
|
||||||
|
data &= mask;
|
||||||
|
// if (smi1)
|
||||||
|
// southbridge_smi_command(data);
|
||||||
|
// return;
|
||||||
|
}
|
||||||
|
// Fall through to debug
|
||||||
|
}
|
||||||
|
|
||||||
|
printk_debug(" trapped io address = 0x%x\n", trap_cycle & 0xfffc);
|
||||||
|
for (i=0; i < 4; i++) if(IOTRAP(i)) printk_debug(" TRAP = %d\n", i);
|
||||||
|
printk_debug(" AHBE = %x\n", (trap_cycle >> 16) & 0xf);
|
||||||
|
printk_debug(" MASK = 0x%08x\n", mask);
|
||||||
|
printk_debug(" read/write: %s\n", (trap_cycle & (1 << 24)) ? "read" : "write");
|
||||||
|
|
||||||
|
if (!(trap_cycle & (1 << 24))) {
|
||||||
|
/* Write Cycle */
|
||||||
|
data = RCBA32(0x1e18);
|
||||||
|
printk_debug(" iotrap written data = 0x%08x\n", data);
|
||||||
|
}
|
||||||
|
#undef IOTRAP
|
||||||
|
}
|
||||||
|
|
||||||
|
typedef void (*smi_handler)(unsigned int node,
|
||||||
|
smm_state_save_area_t *state_save);
|
||||||
|
|
||||||
|
smi_handler southbridge_smi[32] = {
|
||||||
|
NULL, // [0] reserved
|
||||||
|
NULL, // [1] reserved
|
||||||
|
NULL, // [2] BIOS_STS
|
||||||
|
NULL, // [3] LEGACY_USB_STS
|
||||||
|
southbridge_smi_sleep, // [4] SLP_SMI_STS
|
||||||
|
southbridge_smi_apmc, // [5] APM_STS
|
||||||
|
NULL, // [6] SWSMI_TMR_STS
|
||||||
|
NULL, // [7] reserved
|
||||||
|
southbridge_smi_pm1, // [8] PM1_STS
|
||||||
|
southbridge_smi_gpe0, // [9] GPE0_STS
|
||||||
|
NULL, // [10] GPI_STS
|
||||||
|
southbridge_smi_mc, // [11] MCSMI_STS
|
||||||
|
NULL, // [12] DEVMON_STS
|
||||||
|
southbridge_smi_tco, // [13] TCO_STS
|
||||||
|
southbridge_smi_periodic, // [14] PERIODIC_STS
|
||||||
|
NULL, // [15] SERIRQ_SMI_STS
|
||||||
|
NULL, // [16] SMBUS_SMI_STS
|
||||||
|
NULL, // [17] LEGACY_USB2_STS
|
||||||
|
NULL, // [18] INTEL_USB2_STS
|
||||||
|
NULL, // [19] reserved
|
||||||
|
NULL, // [20] PCI_EXP_SMI_STS
|
||||||
|
southbridge_smi_monitor, // [21] MONITOR_STS
|
||||||
|
NULL, // [22] reserved
|
||||||
|
NULL, // [23] reserved
|
||||||
|
NULL, // [24] reserved
|
||||||
|
NULL, // [25] EL_SMI_STS
|
||||||
|
NULL, // [26] SPI_STS
|
||||||
|
NULL, // [27] reserved
|
||||||
|
NULL, // [28] reserved
|
||||||
|
NULL, // [29] reserved
|
||||||
|
NULL, // [30] reserved
|
||||||
|
NULL // [31] reserved
|
||||||
|
};
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Interrupt handler for SMI#
|
||||||
|
*
|
||||||
|
* @param smm_revision revision of the smm state save map
|
||||||
*/
|
*/
|
||||||
|
|
||||||
/* Write back to the SLP register to cause the
|
void southbridge_smi_handler(unsigned int node, smm_state_save_area_t *state_save)
|
||||||
* originally intended event again. We need to set BIT13
|
{
|
||||||
* (SLP_EN) though to make the sleep happen.
|
int i, dump = 0;
|
||||||
|
u32 smi_sts;
|
||||||
|
|
||||||
|
/* Update global variable pmbase */
|
||||||
|
pmbase = pcie_read_config16(PCI_DEV(0, 0x1f, 0), 0x40) & 0xfffc;
|
||||||
|
|
||||||
|
/* We need to clear the SMI status registers, or we won't see what's
|
||||||
|
* happening in the following calls.
|
||||||
*/
|
*/
|
||||||
reg32 = inl(pmbase + 0x04);
|
smi_sts = reset_smi_status();
|
||||||
printk_debug("SMI#: SLP = 0x%08x\n", reg32);
|
|
||||||
printk_debug("SMI#: Powering off.\n");
|
/* Filter all non-enabled SMI events */
|
||||||
outl(reg32 | (1 << 13), pmbase + 0x04);
|
// FIXME Double check, this clears MONITOR
|
||||||
|
// smi_sts &= inl(pmbase + SMI_EN);
|
||||||
|
|
||||||
|
/* Call SMI sub handler for each of the status bits */
|
||||||
|
for (i = 0; i < 31; i++) {
|
||||||
|
if (smi_sts & (1 << i)) {
|
||||||
|
if (southbridge_smi[i])
|
||||||
|
southbridge_smi[i](node, state_save);
|
||||||
|
else {
|
||||||
|
printk_debug("SMI_STS[%d] occured, but no "
|
||||||
|
"handler available.\n", i);
|
||||||
|
dump = 1;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
if(dump) {
|
||||||
|
dump_smi_status(smi_sts);
|
||||||
}
|
}
|
||||||
|
|
||||||
}
|
}
|
||||||
|
|
|
||||||
|
|
@ -21,16 +21,26 @@
|
||||||
#define EHCI_BAR 0xFEF00000
|
#define EHCI_BAR 0xFEF00000
|
||||||
// These could be read from DEBUG_BASE (0:1d.7 R 0x5A 16bit)
|
// These could be read from DEBUG_BASE (0:1d.7 R 0x5A 16bit)
|
||||||
#define EHCI_BAR_INDEX 0x10
|
#define EHCI_BAR_INDEX 0x10
|
||||||
|
|
||||||
|
#define EHCI_CONFIG_FLAG 0x40
|
||||||
|
#define EHCI_PORTSC 0x44
|
||||||
#define EHCI_DEBUG_OFFSET 0xA0
|
#define EHCI_DEBUG_OFFSET 0xA0
|
||||||
|
|
||||||
static void set_debug_port(unsigned port)
|
void set_debug_port(unsigned port)
|
||||||
{
|
{
|
||||||
// Nothing for now?
|
u32 dbgctl;
|
||||||
|
|
||||||
|
printk_debug("Enabling OWNER_CNT\n");
|
||||||
|
dbgctl = readl(EHCI_BAR + EHCI_DEBUG_OFFSET);
|
||||||
|
dbgctl |= (1 << 30);
|
||||||
|
writel(dbgctl, EHCI_BAR + EHCI_DEBUG_OFFSET);
|
||||||
|
|
||||||
}
|
}
|
||||||
|
|
||||||
static void i82801gx_enable_usbdebug_direct(unsigned port)
|
static void i82801gx_enable_usbdebug_direct(unsigned port)
|
||||||
{
|
{
|
||||||
pci_write_config32(PCI_DEV(0, 0x1d, 7), EHCI_BAR_INDEX, EHCI_BAR);
|
pci_write_config32(PCI_DEV(0, 0x1d, 7), EHCI_BAR_INDEX, EHCI_BAR);
|
||||||
pci_write_config8(PCI_DEV(0, 0x1d, 7), 0x04, 0x2); // Memory Space Enable
|
pci_write_config8(PCI_DEV(0, 0x1d, 7), 0x04, 0x2); // Memory Space Enable
|
||||||
|
set_debug_port(port);
|
||||||
}
|
}
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -31,7 +31,7 @@
|
||||||
static void usb_ehci_init(struct device *dev)
|
static void usb_ehci_init(struct device *dev)
|
||||||
{
|
{
|
||||||
struct resource *res;
|
struct resource *res;
|
||||||
u8 *base;
|
u32 base;
|
||||||
u32 reg32;
|
u32 reg32;
|
||||||
u8 reg8;
|
u8 reg8;
|
||||||
|
|
||||||
|
|
@ -52,9 +52,9 @@ static void usb_ehci_init(struct device *dev)
|
||||||
|
|
||||||
/* Clear any pending port changes */
|
/* Clear any pending port changes */
|
||||||
res = find_resource(dev, 0x10);
|
res = find_resource(dev, 0x10);
|
||||||
base =(u8 *)res->base;
|
base = res->base;
|
||||||
reg32 = readl(base + 0x24) | (1 << 2);
|
reg32 = readl((u8 *)base + 0x24) | (1 << 2);
|
||||||
writel(base + 0x24, reg32);
|
writel(reg32, (u8 *)base + 0x24);
|
||||||
|
|
||||||
/* workaround */
|
/* workaround */
|
||||||
reg8 = pci_read_config8(dev, 0x84);
|
reg8 = pci_read_config8(dev, 0x84);
|
||||||
|
|
@ -115,7 +115,7 @@ static struct pci_operations lops_pci = {
|
||||||
|
|
||||||
static struct device_operations usb_ehci_ops = {
|
static struct device_operations usb_ehci_ops = {
|
||||||
.read_resources = pci_dev_read_resources,
|
.read_resources = pci_dev_read_resources,
|
||||||
.set_resources = pci_dev_set_resources,
|
.set_resources = usb_ehci_set_resources,
|
||||||
.enable_resources = pci_dev_enable_resources,
|
.enable_resources = pci_dev_enable_resources,
|
||||||
.init = usb_ehci_init,
|
.init = usb_ehci_init,
|
||||||
.scan_bus = 0,
|
.scan_bus = 0,
|
||||||
|
|
|
||||||
Loading…
Reference in New Issue