google/sentry: Add as a variant of glados
Add google/sentry (Lenovo Thinkpad 13 Chromebook) as a variant of
glados Skylake reference board:
- add sentry-specific DPTF, EC config, GPIO config, Kconfig,
NHLT config, PEI data, VBT, SPD data, and devicetree
- add sentry-specific GPIO determination of which audio codec
is present
Adapted from Chromium branch firmware-glados-7820.B, commit
b0c3efe54d877246d07f2467b2dff51cc30348fa [soc/intel/skylake: Enable VMX]
Test: build/boot google/sentry, verify correct functionality
Change-Id: I783422aedac8b7fc52098eebd05b2061a1011b60
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/27418
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Youness Alaoui <snifikino@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This commit is contained in:
Matt DeVillier
Martin Roth
parent
4966a8c136
commit
57dd073369
|
|
@ -39,6 +39,7 @@ config MAINBOARD_PART_NUMBER
|
|||
default "Chell" if BOARD_GOOGLE_CHELL
|
||||
default "Glados" if BOARD_GOOGLE_GLADOS
|
||||
default "Lars" if BOARD_GOOGLE_LARS
|
||||
default "Sentry" if BOARD_GOOGLE_SENTRY
|
||||
|
||||
config MAINBOARD_FAMILY
|
||||
string
|
||||
|
|
@ -49,12 +50,14 @@ config VARIANT_DIR
|
|||
default "chell" if BOARD_GOOGLE_CHELL
|
||||
default "glados" if BOARD_GOOGLE_GLADOS
|
||||
default "lars" if BOARD_GOOGLE_LARS
|
||||
default "sentry" if BOARD_GOOGLE_SENTRY
|
||||
|
||||
config DEVICETREE
|
||||
string
|
||||
default "variants/chell/devicetree.cb" if BOARD_GOOGLE_CHELL
|
||||
default "variants/glados/devicetree.cb" if BOARD_GOOGLE_GLADOS
|
||||
default "variants/lars/devicetree.cb" if BOARD_GOOGLE_LARS
|
||||
default "variants/sentry/devicetree.cb" if BOARD_GOOGLE_SENTRY
|
||||
|
||||
config MAX_CPUS
|
||||
int
|
||||
|
|
@ -87,4 +90,5 @@ config GBB_HWID
|
|||
default "CHELL TEST 6297" if BOARD_GOOGLE_CHELL
|
||||
default "GLADOS TEST 1988" if BOARD_GOOGLE_GLADOS
|
||||
default "LARS TEST 5001" if BOARD_GOOGLE_LARS
|
||||
default "SENTRY TEST 6297" if BOARD_GOOGLE_SENTRY
|
||||
endif
|
||||
|
|
|
|||
|
|
@ -17,3 +17,11 @@ config BOARD_GOOGLE_LARS
|
|||
select DRIVERS_GENERIC_MAX98357A
|
||||
select EXCLUDE_NATIVE_SD_INTERFACE
|
||||
select NHLT_MAX98357 if INCLUDE_NHLT_BLOBS
|
||||
|
||||
config BOARD_GOOGLE_SENTRY
|
||||
bool "-> Sentry (Lenovo Thinkpad 13 Chromebook)"
|
||||
select BOARD_GOOGLE_BASEBOARD_GLADOS
|
||||
select DRIVERS_GENERIC_MAX98357A
|
||||
select NHLT_DMIC_4CH if INCLUDE_NHLT_BLOBS
|
||||
select NHLT_MAX98357 if INCLUDE_NHLT_BLOBS
|
||||
select NHLT_SSM4567 if INCLUDE_NHLT_BLOBS
|
||||
|
|
|
|||
|
|
@ -19,8 +19,10 @@
|
|||
#include <baseboard/variant.h>
|
||||
#include <console/console.h>
|
||||
#include <device/device.h>
|
||||
#include <gpio.h>
|
||||
#include <stdlib.h>
|
||||
#include <soc/nhlt.h>
|
||||
#include <variant/gpio.h>
|
||||
#include <vendorcode/google/chromeos/chromeos.h>
|
||||
#include "ec.h"
|
||||
|
||||
|
|
@ -32,6 +34,24 @@ static void mainboard_init(struct device *dev)
|
|||
mainboard_ec_init();
|
||||
}
|
||||
|
||||
static uint8_t adi_codec_enable(void)
|
||||
{
|
||||
#ifdef AUDIO_DB_ID
|
||||
return gpio_get(AUDIO_DB_ID);
|
||||
#else
|
||||
return 1;
|
||||
#endif
|
||||
}
|
||||
|
||||
static uint8_t max_codec_enable(void)
|
||||
{
|
||||
#ifdef AUDIO_DB_ID
|
||||
return gpio_get(AUDIO_DB_ID) ? 0 : 1;
|
||||
#else
|
||||
return 1;
|
||||
#endif
|
||||
}
|
||||
|
||||
static unsigned long mainboard_write_acpi_tables(
|
||||
struct device *device, unsigned long current, acpi_rsdp_t *rsdp)
|
||||
{
|
||||
|
|
@ -58,12 +78,12 @@ static unsigned long mainboard_write_acpi_tables(
|
|||
printk(BIOS_ERR, "Couldn't add 4CH DMIC arrays.\n");
|
||||
|
||||
/* ADI Smart Amps for left and right. */
|
||||
if (IS_ENABLED(CONFIG_NHLT_SSM4567))
|
||||
if (IS_ENABLED(CONFIG_NHLT_SSM4567) && adi_codec_enable())
|
||||
if (nhlt_soc_add_ssm4567(nhlt, AUDIO_LINK_SSP0))
|
||||
printk(BIOS_ERR, "Couldn't add ssm4567.\n");
|
||||
|
||||
/* MAXIM Smart Amps for left and right. */
|
||||
if (IS_ENABLED(CONFIG_NHLT_MAX98357)) {
|
||||
if (IS_ENABLED(CONFIG_NHLT_MAX98357) && max_codec_enable()) {
|
||||
if (nhlt_soc_add_max98357(nhlt, AUDIO_LINK_SSP0))
|
||||
printk(BIOS_ERR, "Couldn't add max98357.\n");
|
||||
|
||||
|
|
|
|||
|
|
@ -0,0 +1,16 @@
|
|||
91 20 F1 03 05 19 05 03 03 11 01 08 09 00 40 05
|
||||
78 78 90 50 90 11 50 E0 90 06 3C 3C 01 90 00 00
|
||||
00 00 CA FA 00 00 00 A8 00 08 00 00 00 00 00 00
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
||||
00 00 00 00 00 80 AD 01 00 00 00 00 00 00 00 00
|
||||
48 39 43 43 4E 4E 4E 38 47 54 4D 4C 41 52 2D 4E
|
||||
55 44 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
||||
|
|
@ -0,0 +1,16 @@
|
|||
91 20 F1 03 05 19 05 0B 03 11 01 08 09 00 40 05
|
||||
78 78 90 50 90 11 50 E0 90 06 3C 3C 01 90 00 00
|
||||
00 00 CA FA 00 00 00 A8 00 08 00 00 00 00 00 00
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
||||
00 00 00 00 00 80 AD 01 00 00 00 00 00 00 00 00
|
||||
48 39 43 43 4E 4E 4E 42 4A 54 4D 4C 41 52 2D 4E
|
||||
55 44 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
||||
|
|
@ -0,0 +1,16 @@
|
|||
91 20 F1 03 04 11 05 0B 03 11 01 08 0A 00 50 01
|
||||
78 78 90 50 90 11 50 E0 10 04 3C 3C 01 90 00 00
|
||||
00 00 00 00 00 00 00 A8 00 00 00 00 00 00 00 00
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
||||
00 00 00 00 00 00 00 00 00 00 55 00 00 00 00 00
|
||||
20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20
|
||||
20 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
||||
|
|
@ -0,0 +1,52 @@
|
|||
##
|
||||
## This file is part of the coreboot project.
|
||||
##
|
||||
## Copyright (C) 2014 Google Inc.
|
||||
## Copyright (C) 2015 Intel Corporation.
|
||||
##
|
||||
## This program is free software; you can redistribute it and/or modify
|
||||
## it under the terms of the GNU General Public License as published by
|
||||
## the Free Software Foundation; version 2 of the License.
|
||||
##
|
||||
## This program is distributed in the hope that it will be useful,
|
||||
## but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
## GNU General Public License for more details.
|
||||
##
|
||||
|
||||
romstage-y += variant.c
|
||||
ramstage-y += variant.c
|
||||
|
||||
SPD_BIN = $(obj)/spd.bin
|
||||
|
||||
SPD_SOURCES = hynix_dimm_H9CCNNN8GTMLAR-NUD # 0b0000 Dual Channel 4GB
|
||||
SPD_SOURCES += micron_dimm_MT52L256M32D1PF-107-1G-1866 # 0b0001 Dual Channel 4GB
|
||||
SPD_SOURCES += samsung_dimm_K4E8E304EE-EGCF # 0b0010 Dual Channel 4GB
|
||||
SPD_SOURCES += samsung_dimm_K4E6E304EB-EGCF # 0b0011 Dual Channel 8GB
|
||||
SPD_SOURCES += micron_dimm_MT52L512M32D2PF-107-2G-1866 # 0b0100 Dual Channel 8GB
|
||||
SPD_SOURCES += samsung_dimm_K4E8E324EB-EGCF # 0b0101 Dual Channel 8GB
|
||||
SPD_SOURCES += hynix_dimm_H9CCNNNBJTMLAR-NUD # 0b0110 Dual Channel 4GB
|
||||
SPD_SOURCES += hynix_dimm_H9CCNNNBLTBLAR-NUD-2G-1866 # 0b0111 Dual Channel 8GB
|
||||
SPD_SOURCES += empty # 0b1000
|
||||
SPD_SOURCES += empty # 0b1001
|
||||
SPD_SOURCES += empty # 0b1010
|
||||
SPD_SOURCES += empty # 0b1011
|
||||
SPD_SOURCES += empty # 0b1100
|
||||
SPD_SOURCES += empty # 0b1101
|
||||
SPD_SOURCES += empty # 0b1110
|
||||
SPD_SOURCES += empty # 0b1111
|
||||
|
||||
|
||||
SPD_DEPS := $(foreach f, $(SPD_SOURCES), src/mainboard/$(MAINBOARDDIR)/spd/$(f).spd.hex)
|
||||
|
||||
# Include spd ROM data
|
||||
$(SPD_BIN): $(SPD_DEPS)
|
||||
for f in $+; \
|
||||
do for c in $$(cat $$f | grep -v ^#); \
|
||||
do printf $$(printf '\%o' 0x$$c); \
|
||||
done; \
|
||||
done > $@
|
||||
|
||||
cbfs-files-y += spd.bin
|
||||
spd.bin-file := $(SPD_BIN)
|
||||
spd.bin-type := spd
|
||||
|
|
@ -0,0 +1,6 @@
|
|||
Vendor name: Google
|
||||
Board name: Sentry (Lenova Thinkpad Chromebook 13)
|
||||
Category: laptop
|
||||
ROM protocol: SPI
|
||||
ROM socketed: n
|
||||
Flashrom support: y
|
||||
Binary file not shown.
|
|
@ -0,0 +1,311 @@
|
|||
chip soc/intel/skylake
|
||||
|
||||
# Enable deep Sx states
|
||||
register "deep_s3_enable_ac" = "0"
|
||||
register "deep_s3_enable_dc" = "0"
|
||||
register "deep_s5_enable_ac" = "1"
|
||||
register "deep_s5_enable_dc" = "1"
|
||||
register "deep_sx_config" = "DSX_EN_LAN_WAKE_PIN"
|
||||
|
||||
# GPE configuration
|
||||
# Note that GPE events called out in ASL code rely on this
|
||||
# route. i.e. If this route changes then the affected GPE
|
||||
# offset bits also need to be changed.
|
||||
register "gpe0_dw0" = "GPP_B"
|
||||
register "gpe0_dw1" = "GPP_D"
|
||||
register "gpe0_dw2" = "GPP_E"
|
||||
|
||||
# EC host command ranges are in 0x800-0x8ff & 0x200-0x20f
|
||||
register "gen1_dec" = "0x00fc0801"
|
||||
register "gen2_dec" = "0x000c0201"
|
||||
|
||||
# Enable "Intel Speed Shift Technology"
|
||||
register "speed_shift_enable" = "1"
|
||||
|
||||
# Enable DPTF
|
||||
register "dptf_enable" = "1"
|
||||
|
||||
# FSP Configuration
|
||||
register "EnableAzalia" = "1"
|
||||
register "DspEnable" = "1"
|
||||
register "IoBufferOwnership" = "3"
|
||||
register "SmbusEnable" = "1"
|
||||
register "ScsEmmcEnabled" = "1"
|
||||
register "ScsEmmcHs400Enabled" = "1"
|
||||
register "ScsSdCardEnabled" = "2"
|
||||
register "InternalGfx" = "1"
|
||||
register "SkipExtGfxScan" = "1"
|
||||
register "Device4Enable" = "1"
|
||||
register "HeciEnabled" = "0"
|
||||
register "SaGv" = "3"
|
||||
register "SerialIrqConfigSirqEnable" = "1"
|
||||
register "PmConfigSlpS3MinAssert" = "2" # 50ms
|
||||
register "PmConfigSlpS4MinAssert" = "4" # 4s
|
||||
register "PmConfigSlpSusMinAssert" = "3" # 4s
|
||||
register "PmConfigSlpAMinAssert" = "3" # 2s
|
||||
register "PmTimerDisabled" = "1"
|
||||
|
||||
register "pirqa_routing" = "PCH_IRQ11"
|
||||
register "pirqb_routing" = "PCH_IRQ10"
|
||||
register "pirqc_routing" = "PCH_IRQ11"
|
||||
register "pirqd_routing" = "PCH_IRQ11"
|
||||
register "pirqe_routing" = "PCH_IRQ11"
|
||||
register "pirqf_routing" = "PCH_IRQ11"
|
||||
register "pirqg_routing" = "PCH_IRQ11"
|
||||
register "pirqh_routing" = "PCH_IRQ11"
|
||||
|
||||
# VR Settings Configuration for 5 Domains
|
||||
#+----------------+-------+-------+-------------+-------------+-------+
|
||||
#| Domain/Setting | SA | IA | Ring Sliced | GT Unsliced | GT |
|
||||
#+----------------+-------+-------+-------------+-------------+-------+
|
||||
#| Psi1Threshold | 20A | 20A | 20A | 20A | 20A |
|
||||
#| Psi2Threshold | 4A | 5A | 5A | 5A | 5A |
|
||||
#| Psi3Threshold | 1A | 1A | 1A | 1A | 1A |
|
||||
#| Psi3Enable | 1 | 1 | 1 | 1 | 1 |
|
||||
#| Psi4Enable | 1 | 1 | 1 | 1 | 1 |
|
||||
#| ImonSlope | 0 | 0 | 0 | 0 | 0 |
|
||||
#| ImonOffset | 0 | 0 | 0 | 0 | 0 |
|
||||
#| IccMax | 7A | 34A | 34A | 35A | 35A |
|
||||
#| VrVoltageLimit | 1.52V | 1.52V | 1.52V | 1.52V | 1.52V |
|
||||
#+----------------+-------+-------+-------------+-------------+-------+
|
||||
register "domain_vr_config[VR_SYSTEM_AGENT]" = "{
|
||||
.vr_config_enable = 1,
|
||||
.psi1threshold = VR_CFG_AMP(20),
|
||||
.psi2threshold = VR_CFG_AMP(4),
|
||||
.psi3threshold = VR_CFG_AMP(1),
|
||||
.psi3enable = 1,
|
||||
.psi4enable = 1,
|
||||
.imon_slope = 0x0,
|
||||
.imon_offset = 0x0,
|
||||
.icc_max = VR_CFG_AMP(7),
|
||||
.voltage_limit = 1520,
|
||||
}"
|
||||
|
||||
register "domain_vr_config[VR_IA_CORE]" = "{
|
||||
.vr_config_enable = 1,
|
||||
.psi1threshold = VR_CFG_AMP(20),
|
||||
.psi2threshold = VR_CFG_AMP(5),
|
||||
.psi3threshold = VR_CFG_AMP(1),
|
||||
.psi3enable = 1,
|
||||
.psi4enable = 1,
|
||||
.imon_slope = 0x0,
|
||||
.imon_offset = 0x0,
|
||||
.icc_max = VR_CFG_AMP(34),
|
||||
.voltage_limit = 1520,
|
||||
}"
|
||||
|
||||
register "domain_vr_config[VR_RING]" = "{
|
||||
.vr_config_enable = 1,
|
||||
.psi1threshold = VR_CFG_AMP(20),
|
||||
.psi2threshold = VR_CFG_AMP(5),
|
||||
.psi3threshold = VR_CFG_AMP(1),
|
||||
.psi3enable = 1,
|
||||
.psi4enable = 1,
|
||||
.imon_slope = 0x0,
|
||||
.imon_offset = 0x0,
|
||||
.icc_max = VR_CFG_AMP(34),
|
||||
.voltage_limit = 1520,
|
||||
}"
|
||||
|
||||
register "domain_vr_config[VR_GT_UNSLICED]" = "{
|
||||
.vr_config_enable = 1,
|
||||
.psi1threshold = VR_CFG_AMP(20),
|
||||
.psi2threshold = VR_CFG_AMP(5),
|
||||
.psi3threshold = VR_CFG_AMP(1),
|
||||
.psi3enable = 1,
|
||||
.psi4enable = 1,
|
||||
.imon_slope = 0x0,
|
||||
.imon_offset = 0x0,
|
||||
.icc_max = VR_CFG_AMP(35),
|
||||
.voltage_limit = 1520,
|
||||
}"
|
||||
|
||||
register "domain_vr_config[VR_GT_SLICED]" = "{
|
||||
.vr_config_enable = 1,
|
||||
.psi1threshold = VR_CFG_AMP(20),
|
||||
.psi2threshold = VR_CFG_AMP(5),
|
||||
.psi3threshold = VR_CFG_AMP(1),
|
||||
.psi3enable = 1,
|
||||
.psi4enable = 1,
|
||||
.imon_slope = 0x0,
|
||||
.imon_offset = 0x0,
|
||||
.icc_max = VR_CFG_AMP(35),
|
||||
.voltage_limit = 1520,
|
||||
}"
|
||||
|
||||
# Enable Root port 1 and 5.
|
||||
register "PcieRpEnable[0]" = "1"
|
||||
register "PcieRpEnable[4]" = "1"
|
||||
# Enable CLKREQ#
|
||||
register "PcieRpClkReqSupport[0]" = "1"
|
||||
register "PcieRpClkReqSupport[4]" = "1"
|
||||
# RP 1 uses SRCCLKREQ1# while RP 5 uses SRCCLKREQ2#
|
||||
register "PcieRpClkReqNumber[0]" = "1"
|
||||
register "PcieRpClkReqNumber[4]" = "2"
|
||||
|
||||
register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC0)" # Type-C Port 1
|
||||
register "usb2_ports[1]" = "USB2_PORT_TYPE_C(OC1)" # Type-C Port 2
|
||||
register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth
|
||||
register "usb2_ports[4]" = "USB2_PORT_MID(OC2)" # Type-A Port (card)
|
||||
register "usb2_ports[6]" = "USB2_PORT_FLEX(OC_SKIP)" # Camera
|
||||
register "usb2_ports[8]" = "USB2_PORT_LONG(OC3)" # Type-A Port (board)
|
||||
|
||||
register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)" # Type-C Port 1
|
||||
register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC1)" # Type-C Port 2
|
||||
register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC2)" # Type-A Port (card)
|
||||
register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC3)" # Type-A Port (board)
|
||||
|
||||
register "i2c_voltage[0]" = "I2C_VOLTAGE_3V3" # I2C0 is 3.3V
|
||||
register "i2c_voltage[4]" = "I2C_VOLTAGE_1V8" # I2C4 is 1.8V
|
||||
|
||||
# Must leave UART0 enabled or SD/eMMC will not work as PCI
|
||||
register "SerialIoDevMode" = "{
|
||||
[PchSerialIoIndexI2C0] = PchSerialIoPci,
|
||||
[PchSerialIoIndexI2C1] = PchSerialIoPci,
|
||||
[PchSerialIoIndexI2C2] = PchSerialIoDisabled,
|
||||
[PchSerialIoIndexI2C3] = PchSerialIoDisabled,
|
||||
[PchSerialIoIndexI2C4] = PchSerialIoPci,
|
||||
[PchSerialIoIndexI2C5] = PchSerialIoDisabled,
|
||||
[PchSerialIoIndexSpi0] = PchSerialIoDisabled,
|
||||
[PchSerialIoIndexSpi1] = PchSerialIoDisabled,
|
||||
[PchSerialIoIndexUart0] = PchSerialIoPci,
|
||||
[PchSerialIoIndexUart1] = PchSerialIoDisabled,
|
||||
[PchSerialIoIndexUart2] = PchSerialIoSkipInit,
|
||||
}"
|
||||
|
||||
# PL2 override 25W
|
||||
register "tdp_pl2_override" = "25"
|
||||
|
||||
# Send an extra VR mailbox command for the PS4 exit issue
|
||||
register "SendVrMbxCmd" = "2"
|
||||
|
||||
# Use default SD card detect GPIO configuration
|
||||
register "sdcard_cd_gpio_default" = "GPP_A7"
|
||||
|
||||
# Lock Down
|
||||
register "common_soc_config" = "{
|
||||
.chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT,
|
||||
}"
|
||||
|
||||
device cpu_cluster 0 on
|
||||
device lapic 0 on end
|
||||
end
|
||||
device domain 0 on
|
||||
device pci 00.0 on end # Host Bridge
|
||||
device pci 02.0 on end # Integrated Graphics Device
|
||||
device pci 14.0 on end # USB xHCI
|
||||
device pci 14.1 off end # USB xDCI (OTG)
|
||||
device pci 14.2 on end # Thermal Subsystem
|
||||
device pci 15.0 on
|
||||
chip drivers/i2c/generic
|
||||
register "hid" = ""RAYD0001""
|
||||
register "desc" = ""Raydium Touchscreen""
|
||||
register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)"
|
||||
device i2c 39 on end
|
||||
end
|
||||
end # I2C #0
|
||||
device pci 15.1 on
|
||||
chip drivers/i2c/generic
|
||||
register "hid" = ""ELAN0000""
|
||||
register "desc" = ""ELAN Touchpad""
|
||||
register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_B3_IRQ)"
|
||||
register "wake" = "GPE0_DW0_05"
|
||||
device i2c 15 on end
|
||||
end
|
||||
end # I2C #1
|
||||
device pci 15.2 off end # I2C #2
|
||||
device pci 15.3 off end # I2C #3
|
||||
device pci 16.0 on end # Management Engine Interface 1
|
||||
device pci 16.1 off end # Management Engine Interface 2
|
||||
device pci 16.2 off end # Management Engine IDE-R
|
||||
device pci 16.3 off end # Management Engine KT Redirection
|
||||
device pci 16.4 off end # Management Engine Interface 3
|
||||
device pci 17.0 off end # SATA
|
||||
device pci 19.0 on end # UART #2
|
||||
device pci 19.1 off end # I2C #5
|
||||
device pci 19.2 on
|
||||
chip drivers/i2c/nau8825
|
||||
register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F10_IRQ)"
|
||||
register "jkdet_enable" = "1"
|
||||
register "jkdet_pull_enable" = "1"
|
||||
register "jkdet_pull_up" = "1"
|
||||
register "jkdet_polarity" = "1" # ActiveLow
|
||||
register "vref_impedance" = "2" # 125kOhm
|
||||
register "micbias_voltage" = "6" # 2.754
|
||||
register "sar_threshold_num" = "4"
|
||||
register "sar_threshold[0]" = "0x08"
|
||||
register "sar_threshold[1]" = "0x12"
|
||||
register "sar_threshold[2]" = "0x26"
|
||||
register "sar_threshold[3]" = "0x73"
|
||||
register "sar_hysteresis" = "0"
|
||||
register "sar_voltage" = "6"
|
||||
register "sar_compare_time" = "1" # 1us
|
||||
register "sar_sampling_time" = "1" # 4us
|
||||
register "short_key_debounce" = "3" # 30ms
|
||||
register "jack_insert_debounce" = "7" # 512ms
|
||||
register "jack_eject_debounce" = "0"
|
||||
device i2c 1a on end
|
||||
end
|
||||
chip drivers/i2c/generic
|
||||
register "hid" = ""INT343B""
|
||||
register "desc" = ""SSM4567 Left Speaker Amp""
|
||||
register "uid" = "0"
|
||||
register "device_present_gpio" = "GPP_E3"
|
||||
device i2c 34 on end
|
||||
end
|
||||
chip drivers/i2c/generic
|
||||
register "hid" = ""INT343B""
|
||||
register "desc" = ""SSM4567 Right Speaker Amp""
|
||||
register "uid" = "1"
|
||||
register "device_present_gpio" = "GPP_E3"
|
||||
device i2c 35 on end
|
||||
end
|
||||
end # I2C #4
|
||||
device pci 1c.0 on
|
||||
chip drivers/intel/wifi
|
||||
register "wake" = "GPE0_DW0_16"
|
||||
device pci 00.0 on end
|
||||
end
|
||||
end # PCI Express Port 1
|
||||
device pci 1c.1 off end # PCI Express Port 2
|
||||
device pci 1c.2 off end # PCI Express Port 3
|
||||
device pci 1c.3 off end # PCI Express Port 4
|
||||
device pci 1c.4 on end # PCI Express Port 5
|
||||
device pci 1c.5 off end # PCI Express Port 6
|
||||
device pci 1c.6 off end # PCI Express Port 7
|
||||
device pci 1c.7 off end # PCI Express Port 8
|
||||
device pci 1d.0 off end # PCI Express Port 9
|
||||
device pci 1d.1 off end # PCI Express Port 10
|
||||
device pci 1d.2 off end # PCI Express Port 11
|
||||
device pci 1d.3 off end # PCI Express Port 12
|
||||
device pci 1e.0 on end # UART #0
|
||||
device pci 1e.1 off end # UART #1
|
||||
device pci 1e.2 off end # GSPI #0
|
||||
device pci 1e.3 off end # GSPI #1
|
||||
device pci 1e.4 on end # eMMC
|
||||
device pci 1e.5 off end # SDIO
|
||||
device pci 1e.6 on end # SDCard
|
||||
device pci 1f.0 on
|
||||
chip drivers/pc80/tpm
|
||||
device pnp 0c31.0 on end
|
||||
end
|
||||
chip ec/google/chromeec
|
||||
device pnp 0c09.0 on end
|
||||
end
|
||||
end # LPC Interface
|
||||
device pci 1f.1 on end # P2SB
|
||||
device pci 1f.2 on end # Power Management Controller
|
||||
device pci 1f.3 on
|
||||
chip drivers/generic/max98357a
|
||||
register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_E3)"
|
||||
register "device_present_gpio" = "GPP_E3"
|
||||
register "device_present_gpio_invert" = "1"
|
||||
register "sdmode_delay" = "5"
|
||||
device generic 0 on end
|
||||
end
|
||||
end # Intel HDA
|
||||
device pci 1f.4 on end # SMBus
|
||||
device pci 1f.5 on end # PCH SPI
|
||||
device pci 1f.6 off end # GbE
|
||||
end
|
||||
end
|
||||
|
|
@ -0,0 +1,136 @@
|
|||
/*
|
||||
* This file is part of the coreboot project.
|
||||
*
|
||||
* Copyright (C) 2014 Google Inc.
|
||||
* Copyright (C) 2015 Intel Corporation.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; version 2 of the License.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
#define DPTF_CPU_PASSIVE 90
|
||||
#define DPTF_CPU_CRITICAL 98
|
||||
#define DPTF_CPU_ACTIVE_AC0 90
|
||||
#define DPTF_CPU_ACTIVE_AC1 77
|
||||
|
||||
#define DPTF_TSR0_SENSOR_ID 0
|
||||
#define DPTF_TSR0_SENSOR_NAME "TMP432_Internal"
|
||||
#define DPTF_TSR0_PASSIVE 70
|
||||
#define DPTF_TSR0_CRITICAL 75
|
||||
#define DPTF_TSR0_ACTIVE_AC0 120
|
||||
#define DPTF_TSR0_ACTIVE_AC1 110
|
||||
#define DPTF_TSR0_ACTIVE_AC2 47
|
||||
#define DPTF_TSR0_ACTIVE_AC3 44
|
||||
#define DPTF_TSR0_ACTIVE_AC4 41
|
||||
#define DPTF_TSR0_ACTIVE_AC5 38
|
||||
#define DPTF_TSR0_ACTIVE_AC6 35
|
||||
|
||||
#define DPTF_TSR1_SENSOR_ID 1
|
||||
#define DPTF_TSR1_SENSOR_NAME "TMP432_Power_top"
|
||||
#define DPTF_TSR1_PASSIVE 70
|
||||
#define DPTF_TSR1_CRITICAL 75
|
||||
|
||||
#define DPTF_TSR2_SENSOR_ID 2
|
||||
#define DPTF_TSR2_SENSOR_NAME "TMP432_CPU_bottom"
|
||||
#define DPTF_TSR2_PASSIVE 70
|
||||
#define DPTF_TSR2_CRITICAL 75
|
||||
|
||||
#define DPTF_ENABLE_CHARGER
|
||||
#define DPTF_ENABLE_FAN_CONTROL
|
||||
|
||||
#undef DPTF_ENABLE_FAN_CONTROL /*Disable DPTF Active policy*/
|
||||
|
||||
/* Charger performance states, board-specific values from charger and EC */
|
||||
Name (CHPS, Package () {
|
||||
Package () { 0, 0, 0, 0, 255, 0x6a4, "mA", 0 }, /* 1.7A (MAX) */
|
||||
Package () { 0, 0, 0, 0, 24, 0x600, "mA", 0 }, /* 1.5A */
|
||||
Package () { 0, 0, 0, 0, 16, 0x400, "mA", 0 }, /* 1.0A */
|
||||
Package () { 0, 0, 0, 0, 8, 0x200, "mA", 0 }, /* 0.5A */
|
||||
Package () { 0, 0, 0, 0, 0, 0x000, "mA", 0 }, /* 0.0A */
|
||||
})
|
||||
|
||||
#ifdef DPTF_ENABLE_FAN_CONTROL
|
||||
/* DFPS: Fan Performance States */
|
||||
Name (DFPS, Package () {
|
||||
0, // Revision
|
||||
/*
|
||||
* TODO : Need to update this Table after characterization.
|
||||
* These are initial reference values.
|
||||
*/
|
||||
/* Control, Trip Point, Speed, NoiseLevel, Power */
|
||||
Package () {100, 0xFFFFFFFF, 4986, 220, 2200},
|
||||
Package () {90, 0xFFFFFFFF, 4804, 180, 1800},
|
||||
Package () {80, 0xFFFFFFFF, 4512, 145, 1450},
|
||||
Package () {70, 0xFFFFFFFF, 4204, 115, 1150},
|
||||
Package () {60, 0xFFFFFFFF, 3838, 90, 900},
|
||||
Package () {50, 0xFFFFFFFF, 3402, 65, 650},
|
||||
Package () {40, 0xFFFFFFFF, 2904, 45, 450},
|
||||
Package () {30, 0xFFFFFFFF, 2337, 30, 300},
|
||||
Package () {20, 0xFFFFFFFF, 1608, 15, 150},
|
||||
Package () {10, 0xFFFFFFFF, 800, 10, 100},
|
||||
Package () {0, 0xFFFFFFFF, 0, 0, 50}
|
||||
})
|
||||
|
||||
Name (DART, Package () {
|
||||
/* Fan effect on CPU */
|
||||
0, // Revision
|
||||
Package () {
|
||||
/*
|
||||
* Source, Target, Weight, AC0, AC1, AC2, AC3, AC4, AC5, AC6,
|
||||
* AC7, AC8, AC9
|
||||
*/
|
||||
\_SB.DPTF.TFN1, \_SB.PCI0.B0D4, 100, 100, 81, 0, 0, 0, 0, 0,
|
||||
0, 0, 0
|
||||
},
|
||||
Package () {
|
||||
\_SB.DPTF.TFN1, \_SB.DPTF.TSR0, 100, 100, 81, 68, 56, 48, 40,
|
||||
35, 0, 0, 0
|
||||
}
|
||||
})
|
||||
#endif
|
||||
|
||||
Name (DTRT, Package () {
|
||||
/* CPU Throttle Effect on CPU */
|
||||
Package () { \_SB.PCI0.B0D4, \_SB.PCI0.B0D4, 100, 20, 0, 0, 0, 0 },
|
||||
|
||||
/* CPU Effect on Temp Sensor 0 */
|
||||
Package () { \_SB.PCI0.B0D4, \_SB.DPTF.TSR0, 100, 20, 0, 0, 0, 0 },
|
||||
|
||||
#ifdef DPTF_ENABLE_CHARGER
|
||||
/* Charger Effect on Temp Sensor 1 */
|
||||
Package () { \_SB.DPTF.TCHG, \_SB.DPTF.TSR1, 200, 600, 0, 0, 0, 0 },
|
||||
#endif
|
||||
|
||||
/* CPU Effect on Temp Sensor 1 */
|
||||
Package () { \_SB.PCI0.B0D4, \_SB.DPTF.TSR1, 100, 20, 0, 0, 0, 0 },
|
||||
|
||||
/* CPU Effect on Temp Sensor 2 */
|
||||
Package () { \_SB.PCI0.B0D4, \_SB.DPTF.TSR2, 100, 20, 0, 0, 0, 0 },
|
||||
})
|
||||
|
||||
Name (MPPC, Package ()
|
||||
{
|
||||
0x2, /* Revision */
|
||||
Package () { /* Power Limit 1 */
|
||||
0, /* PowerLimitIndex, 0 for Power Limit 1 */
|
||||
1600, /* PowerLimitMinimum */
|
||||
15000, /* PowerLimitMaximum */
|
||||
1000, /* TimeWindowMinimum */
|
||||
1000, /* TimeWindowMaximum */
|
||||
5000 /* StepSize */
|
||||
},
|
||||
Package () { /* Power Limit 2 */
|
||||
1, /* PowerLimitIndex, 1 for Power Limit 2 */
|
||||
18700, /* PowerLimitMinimum */
|
||||
18700, /* PowerLimitMaximum */
|
||||
1000, /* TimeWindowMinimum */
|
||||
1000, /* TimeWindowMaximum */
|
||||
1000 /* StepSize */
|
||||
}
|
||||
})
|
||||
|
|
@ -0,0 +1,17 @@
|
|||
/*
|
||||
* This file is part of the coreboot project.
|
||||
*
|
||||
* Copyright (C) 2015 Google Inc.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; version 2 of the License.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
/* Enable EC backed ALS device in ACPI */
|
||||
#define EC_ENABLE_ALS_DEVICE
|
||||
|
|
@ -0,0 +1,242 @@
|
|||
/*
|
||||
* This file is part of the coreboot project.
|
||||
*
|
||||
* Copyright (C) 2013 Google Inc.
|
||||
* Copyright (C) 2015 Intel Corporation
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; version 2 of the License.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
#ifndef MAINBOARD_GPIO_H
|
||||
#define MAINBOARD_GPIO_H
|
||||
|
||||
#include <soc/gpe.h>
|
||||
#include <soc/gpio.h>
|
||||
|
||||
/* EC in RW */
|
||||
#define GPIO_EC_IN_RW GPP_C6
|
||||
|
||||
/* BIOS Flash Write Protect */
|
||||
#define GPIO_PCH_WP GPP_C23
|
||||
|
||||
/* Memory configuration board straps */
|
||||
#define GPIO_MEM_CONFIG_0 GPP_C12
|
||||
#define GPIO_MEM_CONFIG_1 GPP_C13
|
||||
#define GPIO_MEM_CONFIG_2 GPP_C14
|
||||
#define GPIO_MEM_CONFIG_3 GPP_C15
|
||||
|
||||
/* EC wake is LAN_WAKE# which is a special DeepSX wake pin */
|
||||
#define GPE_EC_WAKE GPE0_LAN_WAK
|
||||
|
||||
/* GPP_B16 is WLAN_WAKE. GPP_B group is routed to DW0 in the GPE0 block */
|
||||
#define GPE_WLAN_WAKE GPE0_DW0_16
|
||||
|
||||
/* GPP_B5 is TOUCHPAD WAKE. GPP_B group is routed to DW0 in the GPE0 block */
|
||||
#define GPE_TOUCHPAD_WAKE GPE0_DW0_05
|
||||
|
||||
/* Input device interrupt configuration */
|
||||
#define TOUCHPAD_INT_L GPP_B3_IRQ
|
||||
#define TOUCHSCREEN_INT_L GPP_E7_IRQ
|
||||
#define MIC_INT_L GPP_F10_IRQ
|
||||
|
||||
/* GPP_E16 is EC_SCI_L. GPP_E group is routed to DW2 in the GPE0 block */
|
||||
#define EC_SCI_GPI GPE0_DW2_16
|
||||
#define EC_SMI_GPI GPP_E15
|
||||
|
||||
/*
|
||||
* GPP_E3 is AUDIO_DB_ID.
|
||||
* It is a dual purpose GPIO, used for Audio Daughter
|
||||
* Board Identification & to control the shutdown mode pin
|
||||
* of the Maxim amp.
|
||||
*/
|
||||
#define AUDIO_DB_ID GPP_E3
|
||||
|
||||
/* SD controller needs additional card detect GPIO to support RTD3 */
|
||||
#define GPIO_SD_CARD_DETECT GPP_A7
|
||||
|
||||
#ifndef __ACPI__
|
||||
/* Pad configuration in ramstage. */
|
||||
static const struct pad_config gpio_table[] = {
|
||||
/* EC_PCH_RCIN */ PAD_CFG_NF(GPP_A0, NONE, DEEP, NF1),
|
||||
/* LPC_LAD_0 */ PAD_CFG_NF(GPP_A1, 20K_PU, DEEP, NF1),
|
||||
/* LPC_LAD_1 */ PAD_CFG_NF(GPP_A2, 20K_PU, DEEP, NF1),
|
||||
/* LPC_LAD_2 */ PAD_CFG_NF(GPP_A3, 20K_PU, DEEP, NF1),
|
||||
/* LPC_LAD_3 */ PAD_CFG_NF(GPP_A4, 20K_PU, DEEP, NF1),
|
||||
/* LPC_FRAME */ PAD_CFG_NF(GPP_A5, NONE, DEEP, NF1),
|
||||
/* LPC_SERIRQ */ PAD_CFG_NF(GPP_A6, NONE, DEEP, NF1),
|
||||
/* SD_CD_WAKE */ PAD_CFG_GPI_GPIO_DRIVER(GPP_A7, 20K_PU, DEEP),
|
||||
/* LPC_CLKRUN */ PAD_CFG_NF(GPP_A8, NONE, DEEP, NF1),
|
||||
/* EC_LPC_CLK */ PAD_CFG_NF(GPP_A9, NONE, DEEP, NF1),
|
||||
/* PCH_LPC_CLK */ PAD_CFG_NC(GPP_A10),
|
||||
/* EC_HID_INT */ PAD_CFG_NC(GPP_A11),
|
||||
/* ISH_KB_PROX_INT */ PAD_CFG_NC(GPP_A12),
|
||||
/* PCH_SUSPWRACB */ PAD_CFG_NF(GPP_A13, NONE, DEEP, NF1),
|
||||
/* PM_SUS_STAT */ PAD_CFG_NC(GPP_A14),
|
||||
/* PCH_SUSACK */ PAD_CFG_NF(GPP_A15, NONE, DEEP, NF1),
|
||||
/* SD_1P8_SEL */ PAD_CFG_NF(GPP_A16, NONE, DEEP, NF1),
|
||||
/* SD_PWR_EN */ PAD_CFG_NF(GPP_A17, NONE, DEEP, NF1),
|
||||
/* ACCEL INTERRUPT */ PAD_CFG_NC(GPP_A18),
|
||||
/* ISH_GP1 */ PAD_CFG_NC(GPP_A19),
|
||||
/* GYRO_DRDY */ PAD_CFG_NC(GPP_A20),
|
||||
/* FLIP_ACCEL_INT */ PAD_CFG_NC(GPP_A21),
|
||||
/* GYRO_INT */ PAD_CFG_NC(GPP_A22),
|
||||
/* ISH_GP5 */ PAD_CFG_NC(GPP_A23),
|
||||
/* CORE_VID0 */ PAD_CFG_NC(GPP_B0),
|
||||
/* CORE_VID1 */ PAD_CFG_NC(GPP_B1),
|
||||
/* HSJ_MIC_DET */ PAD_CFG_GPI_GPIO_DRIVER(GPP_B2, NONE, DEEP),
|
||||
/* TRACKPAD_INT */ PAD_CFG_GPI_APIC(GPP_B3, NONE, PLTRST),
|
||||
/* BT_RF_KILL */ PAD_CFG_NC(GPP_B4),
|
||||
/* SRCCLKREQ0# */ PAD_CFG_GPI_ACPI_SCI(GPP_B5, NONE, DEEP, YES),
|
||||
/* WIFI_CLK_REQ */ PAD_CFG_NF(GPP_B6, NONE, DEEP, NF1),
|
||||
/* KEPLR_CLK_REQ */ PAD_CFG_NF(GPP_B7, NONE, DEEP, NF1),
|
||||
/* AUDIO_INT_WAK */ PAD_CFG_GPI_ACPI_SCI(GPP_B8, NONE, DEEP, YES),
|
||||
/* SSD_CLK_REQ */ PAD_CFG_NF(GPP_B9, NONE, DEEP, NF1),
|
||||
/* SRCCLKREQ5# */ PAD_CFG_NC(GPP_B10),
|
||||
/* MPHY_EXT_PWR_GATE */ PAD_CFG_NC(GPP_B11),
|
||||
/* PM_SLP_S0 */ PAD_CFG_NF(GPP_B12, NONE, DEEP, NF1),
|
||||
/* PCH_PLT_RST */ PAD_CFG_NF(GPP_B13, NONE, DEEP, NF1),
|
||||
/* PCH_BUZZER */ PAD_CFG_GPI_GPIO_DRIVER(GPP_B14, NONE, DEEP),
|
||||
/* GSPI0_CS# */ PAD_CFG_NC(GPP_B15),
|
||||
/* WLAN_PCIE_WAKE */ PAD_CFG_GPI_ACPI_SCI(GPP_B16, NONE, DEEP, YES),
|
||||
/* SSD_PCIE_WAKE */ PAD_CFG_NC(GPP_B17),
|
||||
/* GSPI0_MOSI */ PAD_CFG_NC(GPP_B18),
|
||||
/* CCODEC_SPI_CS */ PAD_CFG_NC(GPP_B19),
|
||||
/* CODEC_SPI_CLK */ PAD_CFG_NC(GPP_B20),
|
||||
/* CODEC_SPI_MISO */ PAD_CFG_NC(GPP_B21),
|
||||
/* CODEC_SPI_MOSI */ PAD_CFG_NC(GPP_B22),
|
||||
/* SM1ALERT# */ PAD_CFG_NC(GPP_B23),
|
||||
/* SMB_CLK */ PAD_CFG_NF(GPP_C0, NONE, DEEP, NF1),
|
||||
/* SMB_DATA */ PAD_CFG_NF(GPP_C1, NONE, DEEP, NF1),
|
||||
/* SMBALERT# */ PAD_CFG_GPO(GPP_C2, 0, DEEP),
|
||||
/* M2_WWAN_PWREN */ PAD_CFG_NC(GPP_C3),
|
||||
/* SML0DATA */ PAD_CFG_NC(GPP_C4),
|
||||
/* SML0ALERT# */ PAD_CFG_NC(GPP_C5),
|
||||
/* EC_IN_RW */ PAD_CFG_GPI_GPIO_DRIVER(GPP_C6, NONE, DEEP),
|
||||
/* USB_CTL */ PAD_CFG_NC(GPP_C7),
|
||||
/* UART0_RXD */ PAD_CFG_NC(GPP_C8),
|
||||
/* UART0_TXD */ PAD_CFG_NC(GPP_C9),
|
||||
/* NFC_RST* */ PAD_CFG_NC(GPP_C10),
|
||||
/* EN_PP3300_KEPLER */ PAD_CFG_TERM_GPO(GPP_C11, 0, 20K_PD, DEEP),
|
||||
/* PCH_MEM_CFG0 */ PAD_CFG_GPI_GPIO_DRIVER(GPP_C12, NONE, DEEP),
|
||||
/* PCH_MEM_CFG1 */ PAD_CFG_GPI_GPIO_DRIVER(GPP_C13, NONE, DEEP),
|
||||
/* PCH_MEM_CFG2 */ PAD_CFG_GPI_GPIO_DRIVER(GPP_C14, NONE, DEEP),
|
||||
/* PCH_MEM_CFG3 */ PAD_CFG_GPI_GPIO_DRIVER(GPP_C15, NONE, DEEP),
|
||||
/* I2C0_SDA */ PAD_CFG_NF(GPP_C16, 5K_PU, DEEP, NF1),
|
||||
/* I2C0_SCL */ PAD_CFG_NF(GPP_C17, 5K_PU, DEEP, NF1),
|
||||
/* I2C1_SDA */ PAD_CFG_NF(GPP_C18, NONE, DEEP, NF1),
|
||||
/* I2C1_SCL */ PAD_CFG_NF(GPP_C19, NONE, DEEP, NF1),
|
||||
/* GD_UART2_RXD */ PAD_CFG_NF(GPP_C20, NONE, DEEP, NF1),
|
||||
/* GD_UART2_TXD */ PAD_CFG_NF(GPP_C21, NONE, DEEP, NF1),
|
||||
/* TCH_PNL_PWREN */ PAD_CFG_GPO(GPP_C22, 1, DEEP),
|
||||
/* SPI_WP_STATUS */ PAD_CFG_GPI_GPIO_DRIVER(GPP_C23, 20K_PU, DEEP),
|
||||
/* ITCH_SPI_CS */ PAD_CFG_NC(GPP_D0),
|
||||
/* ITCH_SPI_CLK */ PAD_CFG_NC(GPP_D1),
|
||||
/* ITCH_SPI_MISO_1 */ PAD_CFG_NC(GPP_D2),
|
||||
/* ITCH_SPI_MISO_0 */ PAD_CFG_NC(GPP_D3),
|
||||
/* CAM_FLASH_STROBE */ PAD_CFG_NC(GPP_D4),
|
||||
/* EN_PP3300_DX_EMMC */ PAD_CFG_NC(GPP_D5),
|
||||
/* EN_PP1800_DX_EMMC */ PAD_CFG_NC(GPP_D6),
|
||||
/* SH_I2C1_SDA */ PAD_CFG_NC(GPP_D7),
|
||||
/* SH_I2C1_SCL */ PAD_CFG_NC(GPP_D8),
|
||||
/* ISH_SPI_CSB */ PAD_CFG_NC(GPP_D9),
|
||||
/* USB_A0_ILIM_SEL */ PAD_CFG_GPO(GPP_D10, 0, DEEP),
|
||||
/* USB_A1_ILIM_SEL */ PAD_CFG_GPO(GPP_D11, 0, DEEP),
|
||||
/* EN_PP3300_DX_CAM */ PAD_CFG_NC(GPP_D12),
|
||||
/* EN_PP1800_DX_AUDIO */PAD_CFG_NC(GPP_D13),
|
||||
/* ISH_UART0_TXD */ PAD_CFG_NC(GPP_D14),
|
||||
/* ISH_UART0_RTS */ PAD_CFG_NC(GPP_D15),
|
||||
/* ISH_UART0_CTS */ PAD_CFG_NC(GPP_D16),
|
||||
/* DMIC_CLK_1 */ PAD_CFG_NF(GPP_D17, NONE, DEEP, NF1),
|
||||
/* DMIC_DATA_1 */ PAD_CFG_NF(GPP_D18, NONE, DEEP, NF1),
|
||||
/* DMIC_CLK_0 */ PAD_CFG_NF(GPP_D19, NONE, DEEP, NF1),
|
||||
/* DMIC_DATA_0 */ PAD_CFG_NF(GPP_D20, NONE, DEEP, NF1),
|
||||
/* ITCH_SPI_D2 */ PAD_CFG_NC(GPP_D21),
|
||||
/* ITCH_SPI_D3 */ PAD_CFG_NC(GPP_D22),
|
||||
/* I2S_MCLK */ PAD_CFG_NF(GPP_D23, NONE, DEEP, NF1),
|
||||
/* SPI_TPM_IRQ */ PAD_CFG_GPI_APIC(GPP_E0, NONE, PLTRST),
|
||||
/* SATAXPCIE1 */ PAD_CFG_NC(GPP_E1),
|
||||
/* SSD_PEDET */ PAD_CFG_NC(GPP_E2),
|
||||
/* AUDIO_DB_ID */ PAD_CFG_GPI_GPIO_DRIVER(GPP_E3, NONE, DEEP),
|
||||
/* SSD_SATA_DEVSLP */ PAD_CFG_NC(GPP_E4),
|
||||
/* SATA_DEVSLP1 */ PAD_CFG_NC(GPP_E5),
|
||||
/* SATA_DEVSLP2 */ PAD_CFG_NC(GPP_E6),
|
||||
/* TCH_PNL_INTR* */ PAD_CFG_GPI_APIC(GPP_E7, NONE, PLTRST),
|
||||
/* SATALED# */ PAD_CFG_NC(GPP_E8),
|
||||
/* USB2_OC_0 */ PAD_CFG_NF(GPP_E9, NONE, DEEP, NF1),
|
||||
/* USB2_OC_1 */ PAD_CFG_NF(GPP_E10, NONE, DEEP, NF1),
|
||||
/* USB2_OC_2 */ PAD_CFG_NF(GPP_E11, NONE, DEEP, NF1),
|
||||
/* USB2_OC_3 */ PAD_CFG_NF(GPP_E12, NONE, DEEP, NF1),
|
||||
/* DDI1_HPD */ PAD_CFG_NF(GPP_E13, NONE, DEEP, NF1),
|
||||
/* DDI2_HPD */ PAD_CFG_NF(GPP_E14, NONE, DEEP, NF1),
|
||||
/* EC_SMI */ PAD_CFG_GPI_ACPI_SMI(GPP_E15, NONE, DEEP, YES),
|
||||
/* EC_SCI */ PAD_CFG_GPI_ACPI_SCI(GPP_E16, NONE, DEEP, YES),
|
||||
/* EDP_HPD */ PAD_CFG_NF(GPP_E17, NONE, DEEP, NF1),
|
||||
/* DDPB_CTRLCLK */ PAD_CFG_NC(GPP_E18),
|
||||
/* DDPB_CTRLDATA */ PAD_CFG_NF(GPP_E19, NONE, DEEP, NF1),
|
||||
/* DDPC_CTRLCLK */ PAD_CFG_NC(GPP_E20),
|
||||
/* DDPC_CTRLDATA */ PAD_CFG_NF(GPP_E21, NONE, DEEP, NF1),
|
||||
/* DDPD_CTRLCLK */ PAD_CFG_NC(GPP_E22),
|
||||
/* TCH_PNL_RST */ PAD_CFG_GPO(GPP_E23, 1, DEEP),
|
||||
/* I2S2_SCLK */ PAD_CFG_GPI_GPIO_DRIVER(GPP_F0, NONE, DEEP),
|
||||
/* I2S2_SFRM */ PAD_CFG_GPI_GPIO_DRIVER(GPP_F1, NONE, DEEP),
|
||||
/* I2S2_TXD */ PAD_CFG_GPI_GPIO_DRIVER(GPP_F2, NONE, DEEP),
|
||||
/* I2S2_RXD */ PAD_CFG_GPI_GPIO_DRIVER(GPP_F3, NONE, DEEP),
|
||||
/* I2C2_SDA */ PAD_CFG_NC(GPP_F4),
|
||||
/* I2C2_SCL */ PAD_CFG_NC(GPP_F5),
|
||||
/* I2C3_SDA */ PAD_CFG_NC(GPP_F6),
|
||||
/* I2C3_SCL */ PAD_CFG_NC(GPP_F7),
|
||||
/* I2C4_SDA */ PAD_CFG_NF_1V8(GPP_F8, NONE, DEEP, NF1),
|
||||
/* I2C4_SDA */ PAD_CFG_NF_1V8(GPP_F9, NONE, DEEP, NF1),
|
||||
/* AUDIO_IRQ */ PAD_CFG_GPI_APIC(GPP_F10, NONE, PLTRST),
|
||||
/* AUDIO_IRQ */ PAD_CFG_GPI_ACPI_SCI(GPP_F11, NONE, DEEP, YES),
|
||||
/* EMMC_CMD */ PAD_CFG_NF(GPP_F12, NONE, DEEP, NF1),
|
||||
/* EMMC_DATA0 */ PAD_CFG_NF(GPP_F13, NONE, DEEP, NF1),
|
||||
/* EMMC_DATA1 */ PAD_CFG_NF(GPP_F14, NONE, DEEP, NF1),
|
||||
/* EMMC_DATA2 */ PAD_CFG_NF(GPP_F15, NONE, DEEP, NF1),
|
||||
/* EMMC_DATA3 */ PAD_CFG_NF(GPP_F16, NONE, DEEP, NF1),
|
||||
/* EMMC_DATA4 */ PAD_CFG_NF(GPP_F17, NONE, DEEP, NF1),
|
||||
/* EMMC_DATA5 */ PAD_CFG_NF(GPP_F18, NONE, DEEP, NF1),
|
||||
/* EMMC_DATA6 */ PAD_CFG_NF(GPP_F19, NONE, DEEP, NF1),
|
||||
/* EMMC_DATA7 */ PAD_CFG_NF(GPP_F20, NONE, DEEP, NF1),
|
||||
/* EMMC_RCLK */ PAD_CFG_NF(GPP_F21, NONE, DEEP, NF1),
|
||||
/* EMMC_CLK */ PAD_CFG_NF(GPP_F22, NONE, DEEP, NF1),
|
||||
/* BOOT_BEEP */ PAD_CFG_GPO(GPP_F23, 0, DEEP),
|
||||
/* SD_CMD */ PAD_CFG_NF(GPP_G0, NONE, DEEP, NF1),
|
||||
/* SD_DATA0 */ PAD_CFG_NF(GPP_G1, NONE, DEEP, NF1),
|
||||
/* SD_DATA1 */ PAD_CFG_NF(GPP_G2, NONE, DEEP, NF1),
|
||||
/* SD_DATA2 */ PAD_CFG_NF(GPP_G3, NONE, DEEP, NF1),
|
||||
/* SD_DATA3 */ PAD_CFG_NF(GPP_G4, NONE, DEEP, NF1),
|
||||
/* SD_CD# */ PAD_CFG_NF(GPP_G5, NONE, DEEP, NF1),
|
||||
/* SD_CLK */ PAD_CFG_NF(GPP_G6, NONE, DEEP, NF1),
|
||||
/* SD_WP */ PAD_CFG_NF(GPP_G7, 20K_PU, DEEP, NF1),
|
||||
/* PCH_BATLOW */ PAD_CFG_NF(GPD0, NONE, DEEP, NF1),
|
||||
/* EC_PCH_ACPRESENT */ PAD_CFG_NF(GPD1, NONE, DEEP, NF1),
|
||||
/* EC_PCH_WAKE */ PAD_CFG_NF(GPD2, NONE, DEEP, NF1),
|
||||
/* EC_PCH_PWRBTN */ PAD_CFG_NF(GPD3, NONE, DEEP, NF1),
|
||||
/* PM_SLP_S3# */ PAD_CFG_NF(GPD4, NONE, DEEP, NF1),
|
||||
/* PM_SLP_S4# */ PAD_CFG_NF(GPD5, NONE, DEEP, NF1),
|
||||
/* PM_SLP_SA# */ PAD_CFG_NF(GPD6, NONE, DEEP, NF1),
|
||||
/* GPD7 */ PAD_CFG_NC(GPD7),
|
||||
/* PM_SUSCLK */ PAD_CFG_NF(GPD8, NONE, DEEP, NF1),
|
||||
/* PCH_SLP_WLAN# */ PAD_CFG_NC(GPD9),
|
||||
/* PM_SLP_S5# */ PAD_CFG_NC(GPD10),
|
||||
/* LANPHYC */ PAD_CFG_NC(GPD11),
|
||||
};
|
||||
|
||||
/* Early pad configuration in romstage. */
|
||||
static const struct pad_config early_gpio_table[] = {
|
||||
/* SRCCLKREQ2# */ PAD_CFG_NF(GPP_B7, NONE, DEEP, NF1), /* KEPLER */
|
||||
/* SPI_WP_STATUS */ PAD_CFG_GPI_GPIO_DRIVER(GPP_C23, 20K_PU, DEEP),
|
||||
/* UART0_CTS# */ PAD_CFG_GPO(GPP_C11, 0, DEEP), /* EN_PP3300_KEPLER */
|
||||
};
|
||||
|
||||
#endif
|
||||
|
||||
#endif
|
||||
|
|
@ -0,0 +1,61 @@
|
|||
/*
|
||||
* This file is part of the coreboot project.
|
||||
*
|
||||
* Copyright (C) 2014 Google Inc.
|
||||
* Copyright (C) 2015 Intel Corporation.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; version 2 of the License.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
#include <stdint.h>
|
||||
#include <string.h>
|
||||
#include <baseboard/variant.h>
|
||||
#include <soc/pei_data.h>
|
||||
#include <soc/pei_wrapper.h>
|
||||
|
||||
#define K4E6E304EE_MEM_ID 0x3
|
||||
|
||||
void mainboard_fill_pei_data(struct pei_data *pei_data)
|
||||
{
|
||||
/* DQ byte map */
|
||||
const u8 dq_map[2][12] = {
|
||||
{ 0x0F, 0xF0, 0x00, 0xF0, 0x0F, 0xF0,
|
||||
0x0F, 0x00, 0xFF, 0x00, 0xFF, 0x00 },
|
||||
{ 0x0F, 0xF0, 0x00, 0xF0, 0x0F, 0xF0,
|
||||
0x0F, 0x00, 0xFF, 0x00, 0xFF, 0x00 } };
|
||||
/* DQS CPU<>DRAM map */
|
||||
const u8 dqs_map[2][8] = {
|
||||
{ 0, 1, 3, 2, 6, 5, 4, 7 },
|
||||
{ 2, 3, 0, 1, 6, 7, 4, 5 } };
|
||||
|
||||
/* Rcomp resistor */
|
||||
const u16 RcompResistor[3] = { 200, 81, 162 };
|
||||
|
||||
/* Rcomp target */
|
||||
const u16 RcompTarget[5] = { 100, 40, 40, 23, 40 };
|
||||
|
||||
/* Strengthen the Rcomp Target Ctrl for K4E6E304EE_MEM_ID */
|
||||
const u16 StrengthendRcompTarget[5] = { 100, 40, 40, 21, 40 };
|
||||
|
||||
/* Default Rcomp Target assignment */
|
||||
const u16 *targeted_rcomp = RcompTarget;
|
||||
|
||||
memcpy(pei_data->dq_map, dq_map, sizeof(dq_map));
|
||||
memcpy(pei_data->dqs_map, dqs_map, sizeof(dqs_map));
|
||||
memcpy(pei_data->RcompResistor, RcompResistor,
|
||||
sizeof(RcompResistor));
|
||||
|
||||
/* Override Rcomp Target assignment for specific SKU(s) */
|
||||
if (pei_data->mem_cfg_id == K4E6E304EE_MEM_ID)
|
||||
targeted_rcomp = StrengthendRcompTarget;
|
||||
|
||||
memcpy(pei_data->RcompTarget, targeted_rcomp,
|
||||
sizeof(pei_data->RcompTarget));
|
||||
}
|
||||
Loading…
Reference in New Issue