diff --git a/targets/motorola/sandpoint/Config.lb b/targets/motorola/sandpoint/Config.lb
new file mode 100644
index 0000000000..a1fdd2a86e
--- /dev/null
+++ b/targets/motorola/sandpoint/Config.lb
@@ -0,0 +1,75 @@
+# Sample config file for Motorola Sandpoint X3 Demo Board with
+# the Altimus mpc7410 PMC card
+# This will make a target directory of ./sandpoint
+
+loadoptions
+
+target sandpoint
+
+uses ARCH CROSS_COMPILE HAVE_OPTION_TABLE
+uses CONFIG_COMPRESS NO_POST
+uses CONFIG_IDE_STREAM IDE_BOOT_DRIVE
+uses USE_ELF_BOOT IDE_SWAB IDE_OFFSET 
+uses ROM_SIZE ROM_IMAGE_SIZE ROM_SECTION_SIZE ROM_SECTION_OFFSET _ROMBASE
+uses CACHE_RAM_BASE CACHE_RAM_SIZE STACK_SIZE HEAP_SIZE
+uses MAINBOARD MAINBOARD_PART_NUMBER MAINBOARD_VENDOR
+
+## use a cross compiler
+option CROSS_COMPILE="powerpc-eabi-"
+
+## We don't use compressed image
+option CONFIG_COMPRESS=0
+
+## Turn off POST codes
+option NO_POST=1
+
+## Boot linux from IDE
+option CONFIG_IDE_STREAM=1
+option IDE_BOOT_DRIVE=0
+option USE_ELF_BOOT=1
+option IDE_SWAB=1
+option IDE_OFFSET=0
+
+option ROM_SIZE=1048576
+
+## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy.
+option ROM_IMAGE_SIZE=49152
+
+## LinuxBIOS C code runs at this location in RAM
+option _RAMBASE=0x00100000
+
+## For the trick of using cache as ram
+## put the fake ram location at this address
+option CACHE_RAM_BASE=0x00200000
+option CACHE_RAM_SIZE=0x00004000
+
+##
+## Use a 64K stack
+##
+option STACK_SIZE=0x10000
+
+##
+## Use a 64K heap
+##
+option HEAP_SIZE=0x10000
+
+## Compute the location and size of where this firmware image
+## (linuxBIOS plus bootloader) will live in the boot rom chip.
+##       
+option ROM_SECTION_SIZE=ROM_SIZE
+option ROM_SECTION_OFFSET=0
+
+##
+## Compute where this copy of linuxBIOS will start in the boot rom
+## 
+option _ROMBASE=0xfff00000
+
+# Sandpoint Demo Board
+mainboard motorola/sandpoint
+	arch ppc end
+	pmc altimus/mpc7410 end
+
+	addaction linuxbios.a "$(CROSS_COMPILE)ranlib linuxbios.a"
+
+	makedefine CFLAGS += -g
+end