amd/mct/ddr3: Avoid using uninitialized register address in ECC setup
Logic inside mct_EnableDimmEccEn_D uses an unintialized variable as a register address under certain conditions. Refactor mct_EnableDimmEccEn_D to use the explicit address of the register in all cases. Found-by: Coverity Scan #1347337 Change-Id: I6bc50d0524ea255aa97c7071ec4813f6a3e9c2b8 Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com> Reviewed-on: https://review.coreboot.org/18079 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
This commit is contained in:
parent
7d48410631
commit
590a3e1f6c
|
@ -2242,23 +2242,20 @@ void mct_EnableDimmEccEn_D(struct MCTStatStruc *pMCTstat,
|
|||
struct DCTStatStruc *pDCTstat, u8 _DisableDramECC)
|
||||
{
|
||||
u32 val;
|
||||
u32 reg;
|
||||
u32 dev;
|
||||
|
||||
/* Enable ECC correction if it was previously disabled */
|
||||
|
||||
dev = pDCTstat->dev_dct;
|
||||
|
||||
if ((_DisableDramECC & 0x01) == 0x01) {
|
||||
reg = 0x90;
|
||||
val = Get_NB32_DCT(dev, 0, reg);
|
||||
val = Get_NB32_DCT(dev, 0, 0x90);
|
||||
val |= (1<<DimmEcEn);
|
||||
Set_NB32_DCT(dev, 0, reg, val);
|
||||
Set_NB32_DCT(dev, 0, 0x90, val);
|
||||
}
|
||||
if ((_DisableDramECC & 0x02) == 0x02) {
|
||||
val = Get_NB32_DCT(dev, 1, reg);
|
||||
val = Get_NB32_DCT(dev, 1, 0x90);
|
||||
val |= (1<<DimmEcEn);
|
||||
Set_NB32_DCT(dev, 1, reg, val);
|
||||
Set_NB32_DCT(dev, 1, 0x90, val);
|
||||
}
|
||||
}
|
||||
|
||||
|
|
Loading…
Reference in New Issue