google/fizz: Enable cr50 over SPI

By default disabled.  Will need to add
FIZZ_USE_SPI_TPM config to enable.

BUG=b:62456589, b:35775024
BRANCH=None
TEST=Reboot and ensure that TPM works in verstage
CQ-DEPEND=CL:530184

Change-Id: I14ce73a1c3745c996b79c4d4758ca744e63a46b4
Signed-off-by: Shelley Chen <shchen@chromium.org>
Reviewed-on: https://review.coreboot.org/20134
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>

src/mainboard/google/fizz/Kconfig

@@ -5,6 +5,7 @@ config BOARD_SPECIFIC_OPTIONS
 	select BOARD_ID_AUTO
 	select BOARD_ROMSIZE_KB_16384
 	select DRIVERS_I2C_GENERIC
+	select DRIVERS_SPI_ACPI
 	select EC_GOOGLE_CHROMEEC
 	select EC_GOOGLE_CHROMEEC_LPC
 	select HAVE_ACPI_RESUME
@@ -28,6 +29,10 @@ config DRIVER_TPM_I2C_ADDR
 	depends on FIZZ_USE_I2C_TPM
 	default 0x50
 
+config DRIVER_TPM_SPI_BUS
+	depends on FIZZ_USE_SPI_TPM
+	default 0x1
+
 config GBB_HWID
 	string
 	depends on CHROMEOS
@@ -65,6 +70,14 @@ config FIZZ_USE_I2C_TPM
 	select MAINBOARD_HAS_I2C_TPM_CR50
 	select TPM2
 
+# Select this option to enable use of cr50 I2C TPM on fizz.
+config FIZZ_USE_SPI_TPM
+	bool
+	default n
+	select MAINBOARD_HAS_SPI_TPM_CR50
+	select SPI_TPM
+	select TPM2
+
 config TPM_TIS_ACPI_INTERRUPT
 	int
 	default 64  # GPE0_DW2_00 (GPP_E0)

src/mainboard/google/fizz/devicetree.cb

@@ -181,6 +181,13 @@ chip soc/intel/skylake
 	register "i2c_voltage[2]" = "I2C_VOLTAGE_3V3"		# Debug
 	register "i2c_voltage[5]" = "I2C_VOLTAGE_1V8"		# Audio
 
+	# Use GSPI0 for cr50 TPM. Early init is required to set up a BAR for TPM
+	# communication before memory is up.
+	register "gspi[0]" = "{
+		 .speed_mhz = 1,
+		 .early_init = 1,
+	}"
+
 	# Configure I2C1 for cr50 TPM. Early init is required to set up a BAR
 	# for TPM communication before memory is up.
 	register "i2c[1]" = "{
@@ -259,7 +266,14 @@ chip soc/intel/skylake
 		device pci 1d.3 off end # PCI Express Port 12
 		device pci 1e.0 on  end # UART #0
 		device pci 1e.1 off end # UART #1
-		device pci 1e.2 on  end # GSPI #0
+		device pci 1e.2 on
+			chip drivers/spi/acpi
+				register "hid" = "ACPI_DT_NAMESPACE_HID"
+				register "compat_string" = ""google,cr50""
+				register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_E0_IRQ)"
+				device spi 0 on end
+			end
+		end # GSPI #0
 		device pci 1e.3 off end # GSPI #1
 		device pci 1e.4 off  end # eMMC
 		device pci 1e.5 off end # SDIO

src/mainboard/google/fizz/gpio.h

@@ -80,10 +80,21 @@ static const struct pad_config gpio_table[] = {
 /* SLP_S0# */		PAD_CFG_NF(GPP_B12, NONE, DEEP, NF1), /* PM_SLP_S0# */
 /* PLTRST# */		PAD_CFG_NF(GPP_B13, NONE, DEEP, NF1), /* PCI_PLTRST# */
 /* SPKR */		PAD_CFG_NF(GPP_B14, NONE, DEEP, NF1), /* SPKR */
-/* GSPI0_CS# */		PAD_CFG_NC(GPP_B15), /* PCH_SPI_H1_3V3_CS_L */
+#if IS_ENABLED(CONFIG_FIZZ_USE_SPI_TPM)
-/* GSPI0_CLK */		PAD_CFG_NC(GPP_B16), /* PCH_SPI_H1_3V3_CLK */
+/* GSPI0_CS# */		PAD_CFG_NF(GPP_B15, NONE, DEEP,
-/* GSPI0_MISO */	PAD_CFG_NC(GPP_B17), /* PCH_SPI_H1_3V3_MISO */
+				   NF1), /* PCH_SPI_H1_3V3_CS_L */
-/* GSPI0_MOSI */	PAD_CFG_NC(GPP_B18), /* PCH_SPI_H1_3V3_MOSI */
+/* GSPI0_CLK */		PAD_CFG_NF(GPP_B16, NONE, DEEP,
+				   NF1), /* PCH_SPI_H1_3V3_CLK */
+/* GSPI0_MISO */	PAD_CFG_NF(GPP_B17, NONE, DEEP,
+				   NF1), /* PCH_SPI_H1_3V3_MISO */
+/* GSPI0_MOSI */	PAD_CFG_NF(GPP_B18, NONE, DEEP,
+				   NF1), /* PCH_SPI_H1_3V3_MOSI */
+#else
+/* GSPI0_CS# */		PAD_CFG_NC(GPP_B15),
+/* GSPI0_CLK */		PAD_CFG_NC(GPP_B16),
+/* GSPI0_MISO */	PAD_CFG_NC(GPP_B17),
+/* GSPI0_MOSI */	PAD_CFG_NC(GPP_B18),
+#endif
 /* GSPI1_CS# */		PAD_CFG_NC(GPP_B19), /* TP111 */
 /* GSPI1_CLK */		PAD_CFG_GPI(GPP_B20, 20K_PU, DEEP), /* VR_DISABLE_L */
 /* GSPI1_MISO */	PAD_CFG_GPI(GPP_B21, 20K_PU, DEEP), /* HWA_TRST_N */
@@ -238,6 +249,16 @@ static const struct pad_config gpio_table[] = {
 
 /* Early pad configuration in bootblock */
 static const struct pad_config early_gpio_table[] = {
+#if IS_ENABLED(CONFIG_FIZZ_USE_SPI_TPM)
+/* GSPI0_CS# */		PAD_CFG_NF(GPP_B15, NONE, DEEP,
+				   NF1), /* PCH_SPI_H1_3V3_CS_L */
+/* GSPI0_CLK */		PAD_CFG_NF(GPP_B16, NONE, DEEP,
+				   NF1), /* PCH_SPI_H1_3V3_CLK */
+/* GSPI0_MISO */	PAD_CFG_NF(GPP_B17, NONE, DEEP,
+				   NF1), /* PCH_SPI_H1_3V3_MISO */
+/* GSPI0_MOSI */	PAD_CFG_NF(GPP_B18, NONE, DEEP,
+				   NF1), /* PCH_SPI_H1_3V3_MOSI */
+#endif
 #if IS_ENABLED(CONFIG_FIZZ_USE_I2C_TPM)
 /* I2C1_SDA */		PAD_CFG_NF(GPP_C18, NONE, DEEP,
 				   NF1), /* PCH_I2C1_H1_3V3_SDA */

src/mainboard/google/fizz/mainboard.c

@@ -33,6 +33,12 @@ static void mainboard_enable(device_t dev)
 	dev->ops->acpi_inject_dsdt_generator = chromeos_dsdt_generator;
 
 	/* Disable unused interface for TPM. */
+	if (!IS_ENABLED(CONFIG_FIZZ_USE_SPI_TPM)) {
+		tpm = PCH_DEV_GSPI0;
+		if (tpm)
+			tpm->enabled = 0;
+	}
+
 	if (!IS_ENABLED(CONFIG_FIZZ_USE_I2C_TPM)) {
 		tpm = PCH_DEV_I2C1;
 		if (tpm)